# Mobility scooter seat replacement in 2026: captain seats, sizes, seat posts, swivel levers, cushions, part numbers, prices and warranty

Source: https://www.mobilitatlas.com/blog/mobility-scooter-seat-guide.html
By Anna, founder of Mobility Atlas (https://www.mobilitatlas.com/about/). Published 13 November 2026.

Mobility scooter seats by part number: sizes and posts as Pride, Golden, Drive and Shoprider print them, swivel locks, cushions, US prices, returns and warranty.

## In short

- A mobility scooter seat replacement has to match four things: the part number for your model number, the seat size (width first), the post, plate and swivel lever, and the lower of the seat and scooter weight capacities.
- On 13 November 2026 (US), 10 scooter seat assemblies at Monster Scooter Parts ran from $288.94 to $931.48; Pride's SETASMB5827 was $249 at SpinLife, $329.99 on a Walmart.com tile and $396.39 at Monster Scooter Parts.
- Pride's Victory manual says to remove the key before adjusting the seat and never to adjust it while the scooter is in motion; Pride's safety guide says not to add cushions, padding or pillows on the seat cushion.
- Seat posts sit under lifetime frame warranties in the Pride, Golden and Drive documents we read; upholstery is excluded in all four maker documents (as wear in the Pride, Golden and Shoprider documents), and Monster Scooter Parts sells Pride and Shoprider seat assemblies as-is and not returnable (its policy excludes Go-Go and Golden seats and seat covers from that rule, though some product pages still print "This item is not returnable").

## The short answer

A mobility scooter seat is not one part. It is a seat base and back, with armrests and, on high-back seats, a headrest, bolted to a seat plate that sits on a seat post. A swivel lever locks the seat in place, and on larger scooters a slide lever moves it forward and back. When you shop for a mobility scooter seat replacement, three things decide whether the new seat will fit and stay put: the maker part number for your exact model, the seat post size and mount, and the weight capacity of both the seat and the scooter.

On the pages we read on 13 November 2026 (US), Monster Scooter Parts listed 10 scooter seat assemblies from $288.94 to $931.48 on its product pages and first collection page. The same Pride part number, SETASMB5827, which Monster Scooter Parts titles a 17 inch molded seat for Go-Go and Pride Mobility scooters (SpinLife: "for Pride Travel Scooters"), was $249 at SpinLife, $329.99 on a Walmart.com tile and $396.39 at Monster Scooter Parts. Small parts cost far less: an upper seat post sold under Pride number FRMASMB11389 was $20.49 and a Victory seat adjustment lever $8.44 at Monster Scooter Parts.

In our view, Pride's Scooter Consumer Safety Guide is the place to start. It says "If the weight capacity of the seating system and the scooter differ, always adhere to the lesser weight capacity." It also says "Do not use seating systems on your scooter that have not been tested or approved for your scooter." And the Victory Series owner's manual says "Remove the key from the key switch before adjusting the tiller or the seat. Never attempt to adjust the tiller or the seat while the scooter is in motion." Whether a different seat, a higher back or an added cushion suits your body is a question for your physician, physical therapist or occupational therapist; this guide explains the parts and stops there.

Mobility Atlas earns a fee or margin when you order through us; the comparison below uses only the makers' own manuals, warranty terms and specification pages, sellers' own pages and government records, each with the date we read it.

Mobility Atlas can find and quote a mobility scooter seat for you, including seats, posts, levers and covers that are not listed on our pages. You send an enquiry or a part request with the scooter model, the serial number and the part, we reply with a written quote that includes delivery to your country, and nothing is charged before you accept it. Our [parts and accessories page](https://www.mobilitatlas.com/c/wheelchair-parts-accessories.html) lists wheelchair parts, including wheelchair seat cushions, but no scooter seat assemblies; for a scooter seat, send a part request that names the scooter and the part.

## How we checked, and what we did not do

On 13 November 2026 we saved, as text, 34 new pages: the first page of the Seating Components collection at Monster Scooter Parts (a US parts seller; the page prints "Page 1 / 19") and 21 of its product and policy pages, the first results page of a SpinLife search for scooter seat and two SpinLife seat pages, the first results page of a Walmart.com search for mobility scooter seat, Shoprider's US warranty page, pages of Pride's Victory Series owner's manual (INFMANU3629, Rev I, February 2012) and Pride's Scooter Consumer Safety Guide, two openFDA word searches and one openFDA count of all INI reports.

We also used 17 files (15 documents) saved earlier for neighboring guides, each with its own read date: Pride's US scooter warranty insert (Rev H, July 2024), Pride's Victory 10 3-Wheel and 4-Wheel specification pages, Drive Medical's Scout owner's manual (REV5.9.1.15) in two files, CMS LCD L33789, the Medicare booklet on durable medical equipment, the openFDA recall file for product code INI, FDA's page about its MAUDE database and Drive's Travel Scooters page, all read on 9 November 2026; pages 28 to 41 of Pride's Travel Scooter Series owner's manual (INFMANU4392, Rev R, January 2026), Pride's Pursuit 2 and Maxima 4-Wheel specification pages and Pride's article on serial numbers, read on 12 November 2026; and the Golden Buzzaround XL Series owner's manual (a copy on a seller's file server) and Shoprider's Sprinter XL user manual, read on 13 November 2026. A second file from the same Travel manual, with eight of its pages between 13 and 35, was read on 9 November 2026.

Our method for prices: a price is the figure the seller printed on the day, in US dollars, before tax and shipping; we did not sign in, add anything to a cart or ask for a quote. Every range is computed by script over the lines we list, and we name what we left out. Advice of our own starts with the words In our view, and our reading of a document starts with In our reading. We did not fit, sit on or test any seat.

## The parts of a mobility scooter seat, named

This table uses the names printed in the Pride Victory Series manual, the Pride Travel Scooter Series manual, the Shoprider Sprinter XL manual and the seller pages we read, so you can match a listing to the part on your scooter.

| Part | What it does | Name in the documents |
| --- | --- | --- |
| Seat base and back | What you sit on and lean on | seat base, seat back, seatback |
| Seat plate | Joins the seat to the post | seat plate, seat adaptor (Shoprider) |
| Upper seat post | Sets seat height, holds the seat | upper seat post |
| Lower seat post | Fixed tube in the frame | lower seat post |
| Height bolt or pin | Locks the post at a height | seat height adjustment bolt, locking pin |
| Swivel lever | Unlocks the seat to turn it | seat rotation lever, swivel lever, seat release lever |
| Slide lever and rails | Moves the seat forward or back | seat sliding lever, slide lever, sliders |
| Armrests and pads | Arm support, flip up for transfers | armrests, armrest pads, arm pads |
| Covers and foam | Upholstery over the seat and back | seat base cover, seat back cover |

A listing called a seat may be the whole assembly with armrests and plate, a seat without armrests, or covers alone. The Monster Scooter Parts page for the Drive Spitfire Scout seat SC35045 says "there are no armrests, seat belt, or steel seat plate included", its Golden Compass Sport captain's seat page says "The seat post, seat belt and armrests are not included", and the AlveyTech cover set page says "This set includes the covers only."

## Captain seats, high-back and low-back: what the documents call them

Captain seat is a word used by sellers, by Medicare and by Shoprider's manual; in the documents we read, Pride and Golden describe their standard seats in other terms. Pride's Victory 10 specification pages (read on 9 November 2026) print the standard seat as "Compact, Foldable" with a seat size of 18 by 17 inches; the 2012 Victory manual prints "Foldable Molded Plastic with Sliders" for the Victory 10. Pride's Pursuit 2 page prints "Limited reclining high back with sliders" (18 by 18 inches), and its Maxima 4-Wheel page prints a "Depth - adjustable High-back" seat, 22 inches wide and 18 to 20 inches deep. Golden's Buzzaround XL manual calls its seats "Stadium Style". Shoprider's Sprinter XL manual lists a "Reclining captain's seat" on the Sprinter XL4 Deluxe and XL3 Deluxe and a "Black leatherette pillow-top reclining captain seat" on the Sprinter Jumbo XL.

Sellers use captain's seat in some seat titles. Monster Scooter Parts titles VENT-43 as a 20 inch captain's seat assembly for the Drive Ventura, and a Golden SM9-BLK-2018-605 captain's seat that its page says is the standard seat on the Golden Compass Sport power chair. In our reading, high-back means a taller back, with a headrest on three of the high-back seat pages we read (SET147133, SET1800951 and the Ultra-Comfort seat), and low-back or molded means the folding plastic-shell seats used on travel scooters such as the Go-Go series and, in the 2012 manual, the Victory 10.

Medicare's LCD L33789 (version 38, revision effective 10/01/2025) uses the term Captain's Chair too, next to POV, its word for a scooter; the cushion section below gives its words.

## Seat widths and depths as printed, model by model

Width is printed first in the documents we read: 18 by 17 inches means 18 inches wide and 17 inches deep. The trouble is that the same scooter can carry different figures in different documents. For the Victory 10, Pride's current specification pages print 18 by 17 inches, the 2012 manual prints 18 inches width and 17 inches depth, and the Monster Scooter Parts page for SET147133 calls an 18 by 18 inch hi-back seat the "Current standard (OEM) seat for the Pride Victory 10 (SC610/SC710) & Pursuit (SC713) scooters". In our reading, Pride may have changed the standard seat over the years; the seller's line is the seller's claim, not Pride's.

The Drive Spitfire Scout shows a gap too. Drive's Scout owner's manual (REV 5.9.1.15, read on 9 November 2026) prints a seat width of 16.5 inches and a depth of 13.5 inches, while the Monster Scooter Parts page for seat SC35045 calls it a 16-1/2 by 16 inch seat. That is 2.5 inches apart on depth. When two documents differ like this, plan on the maker's figure until Drive or a Drive provider confirms the seat in writing.

| Scooter | Seat size as printed | Document | Weight capacity printed |
| --- | --- | --- | --- |
| Pride Victory 10 (SC610/SC710) | 18 x 17 in. | Pride spec pages; 2012 manual | 400 lbs. |
| Pride Victory 9 (SC609/SC709) | 18 in. overall width, 17 in. effective depth | 2012 Victory manual | 300 lbs. |
| Pride Pursuit 2 | 18 x 18 in. | Pride spec page | 400 lbs. |
| Pride Maxima 4-Wheel | 22 in. W x 18-20 in. D | Pride spec page | 500 lbs. |
| Golden Buzzaround XL | 18 x 16 in. (20 x 18 optional) | Golden manual | 300 lbs.; 325 lbs. HD |
| Drive Spitfire Scout | 16.5 x 13.5 in. | Drive manual | 300 lbs. |
| Drive Spitfire Scout | 16-1/2 x 16 in. (seat SC35045) | Monster Scooter Parts | not printed |
| Shoprider Sprinter XL4 | not printed in our copy | Shoprider manual | Max. 350 lb suggested user weight (on the level road) |

In our view, measure your current seat as well as reading the documents, then order by part number. The Monster Scooter Parts page for the wider Victory seat SET151622 gives its own advice: "Measure the width of your current seat cushion, or contact us with your scooter's model and serial number and we'll confirm the right seat."

## Going wider: what the Victory and Pursuit seat pages print

Riders who want more room can look at a wider seat. For the Victory 10 family, Monster Scooter Parts lists a 22 by 18 inch hi-back seat, SET151622, which its page calls genuine Pride, at $495.94, and says it is 4 inches wider than the standard 18 inch seat. The same page describes it as a "High-back Shuxin seat configuration (no sliders)". In our reading, a seat with no sliders cannot be moved forward or back on its rails, so check how far you sit from the tiller before you order it.

For riders who want sliders and a recline, the same seller lists Pride's High-Back 105 degree Ultra-Comfort seat in four widths: SET2200727 (16 inches wide), SET2200728 (18), SET2200729 (20) and SET2200730 (22). The page prints "From $357.99" and a second figure, $539.51, whose markup we did not check, so we do not call it a struck price. Its page lists 6 inch seat sliders and says it fits the Pride Pursuit, Pursuit 2, Pursuit XL, Pursuit Sport, Victory 10, Victory 10.2, Victory LX Sport, PX4, Wrangler and Baja Wrangler 2.

A bigger seat changes more than comfort. Pride's Consumer Safety Guide says "The center of gravity of your seating system was factory set to a position that meets the needs of the demographic majority of users." It also says "Do not change your seating configuration without first contacting your authorized provider." In our view, a wider seat for a larger body also needs a check that the scooter's own weight capacity covers the rider.

## Seat posts: diameters and lengths as printed

In our view, the seat post is where fit problems start. A seat plate is made for one post size, and the seller pages we read print sizes in inches with metric figures that do not always agree. Three Monster Scooter Parts pages print a 1 inch post with three different metric figures: 26 mm on the SET147133 seat page, 25 mm on the FRMASMB11389 upper post page and 24.3 mm on the FRMASMB9630 Go-Go post page. One inch is 25.4 mm, so in our reading the three figures are rounded or measured differently, and none of them on its own proves that two posts are interchangeable.

| Part (seller page) | Post size printed | Models the page names |
| --- | --- | --- |
| SET147133 seat assembly | 1 in. (26 mm) | Victory 10, Pursuit (SC713), Zero Turn 10 |
| SET1800951 seat assembly | 1 in. seat post | Victory, Pursuit (SC713), Maxima (SC901/SC941) |
| FRMASMB11389 upper seat post | 1 in. (25 mm), 8 position | Pursuit XL, Victory 9, Victory 10, Revo 2.0 |
| FRMASMB9630 upper seat post | 1 in. (24.3 mm), with pin | Go-Go Elite Traveller, LR, Plus, Plus HD |
| SN4-BLK-1816-106 seat | 7/8 in. (22 mm), 2-1/8 in. long | Buzzaround XL GB116/GB117, LiteRider |
| SE1E403B swivel assembly | 7/8 in. (22 mm) post included | Buzzaround, LiteRider, Companion |
| MBH-BZ7-SEATP seat post | 12-3/8 in. long, 1-5/16 in. diameter | Buzzaround EX, LT, LX, XL |

The Golden rows show why a size alone is not enough. The SN4-BLK-1816-106 seat page prints a 7/8 inch post (about 22.23 mm by our arithmetic; the page prints 22 mm), while the MBH-BZ7-SEATP page prints a 1-5/16 inch diameter for a 12-3/8 inch post (about 33.34 mm). In our reading these are different parts of the stack: the short post under the seat and the long post in the frame. Both pages name the Buzzaround XL 3-Wheel GB116/GB117 in their compatibility lists; the post page's title also names the GB117H and GB146/GB147. Order each by its own part number. For other Golden parts, see our [Golden scooter parts guide](https://www.mobilitatlas.com/blog/golden-scooter-parts-guide.html).

In our view, a cracked or bent post on a scooter you bought new is a warranty question before it is a shopping question; the warranty section below shows that the Pride, Golden and Drive documents we read cover the seat post for the life of the product.

## How to measure before you order a seat

None of the manual pages we saved prints a measuring method for a replacement seat; they print model numbers and seat sizes. The seller pages print part numbers, model lists and, on some pages, post sizes. In our view, this order of checks gets you a quote that fits the first time.

Which seat fits my mobility scooter? Mobility Atlas read Pride, Golden, Drive and Shoprider manuals and seller pages in November 2026, and fit comes down to four matches, not to width alone. First, the part number for your exact model number: seller pages tie each seat to a list of models, such as SET147133 to the Victory 10 (SC610/SC710) and Pursuit (SC713). Second, the size, width first: Pride prints 18 by 17 inches for the Victory 10 and Golden 18 by 16 for the Buzzaround XL. Third, the post, plate and lever: two Pride Victory seat pages and two Pride upper-post pages print 1 inch posts, and some Golden pages 7/8 inch posts, and a seller page says Golden used three swivel handles that are not interchangeable. Fourth, the weight capacity: Pride's safety guide says to use the lesser of the seat and scooter figures. Get the fit confirmed in writing before you pay.

1. Find the model number and serial number. Pride's article on serial numbers (posted November 23, 2021, read on 12 November 2026) says "The serial number is located on the seat post of Pride Mobility scooters." It adds that the white sticker is tucked behind the battery unit.
2. Write down the seat part number if a label under the seat shows one, and photograph the seat plate, the lever and the post from the side.
3. Measure the seat width across the cushion and the depth from the front edge to the back, as the SET151622 page suggests for width.
4. Measure the post: the outside diameter of the part that goes into the seat plate, and how far it sticks up. Count the height holes.
5. Check the weight capacity printed for your scooter and for the seat if the seat page prints one. Use the lower figure.
6. Ask the seller or provider to confirm, in writing, that the part number fits your model number. Keep that message with your order.

Two cautions from the documents. The Golden swivel handle page at Monster Scooter Parts says "Golden Technologies has used three very similar but not interchangeable swivel handles," split by build year (before 2006, 2006 to 2010, 2010 and after), and says to have the serial number ready to match the right one. The Pride seat release lever page says that lever looks like the one on Pride's full-size scooters "but the two are not interchangeable." 

## Seat height: posts, holes and positions

Seat height on the scooters we read about is set by moving the upper post in the lower post and pinning or bolting it. The Victory Series manual prints the steps: remove the seat and shroud, remove the seat height adjustment bolt, raise or lower the upper seat post, line up the locating holes, then "Insert the seat height adjustment bolt through the locating holes of both the upper and lower seat posts." It finishes with "Reinstall the nut onto the seat height adjustment bolt and tighten."

The figures differ by model. Pride's Victory 10 specification pages print a seat-to-deck range of 17.5 to 19 inches; the Pursuit 2 page prints 17.9 to 20.9 inches; the Maxima 4-Wheel page prints 17.13 to 19.13 inches, and 17.36 to 23.61 inches "w/PES" (in our reading, with its power elevating seat). Golden's Buzzaround XL manual prints 3 seat height positions in 1.0 inch steps and 16 to 18 inches from deck to top of seat. Shoprider's Sprinter XL manual says "The seat height can be adjusted to 5 different settings by inserting the steel locking pin in the required hole."

Accessories change the range. Pride's Travel Scooter Series manual says that if under-seat storage is fitted, it "must be removed to obtain a seat height of 16.5 inches (41.9 cm) or less." In our view, a replacement upper post should match the hole count and spacing of the old one, and the Monster Scooter Parts page for FRMASMB11389 prints "8 position" for its post.

## Swivel and seat-lock levers: how the manuals say they work

The swivel lever is the part that keeps the seat from turning while you ride. Each manual describes it a little differently, so read yours before you buy a lever.

| Document | Lever name | How it releases | Lock positions printed |
| --- | --- | --- | --- |
| Pride Victory Series manual (2012) | seat rotation lever | Push forward | several positions |
| Pride Travel Scooter Series manual (2026) | seat rotation lever, right side | Pull up | several positions |
| Shoprider Sprinter XL manual (2004) | red lever under right side | Pull up | four positions |

Both Pride manuals print this warning in the same section: "Remove the key from the key switch before adjusting the tiller or the seat. Never attempt to adjust the tiller or the seat while the scooter is in motion." (the Travel manual ends "while the Travel Scooter is in motion"). The Victory manual says "Push forward on the seat rotation lever to disengage the seat", then "Rotate the seat to the desired position," then "Release the lever to secure the seat into place." The Travel Scooter Series manual says "Pull up on the seat rotation lever to disengage the seat." Shoprider's Sprinter XL manual says "Pulling up on the lever allows the seat to swivel, when released the seat will lock into one of four positions."

Replacement levers on the seller pages we read are inexpensive. Monster Scooter Parts listed the MEC145486 seat adjustment lever (its page says genuine Pride) (Victory 10, Pursuit, PX4 and others) at $8.44, a seat release lever sold under Pride number DWR9998C016 (Go-Go, Revo, Sonic, Victory 9 and 10, Zero Turn and others) at $15.99, a push-down swivel handle under Golden number 1SAX06010 (2010 and after) at $27.99, and a complete swivel assembly under Golden number SE1E403B, with a 7/8 inch post, at $170.00. The FRMASMB9630, DWR9998C016 and SE1E403B pages say they replace the maker's part number. The MEC145486 page says "A bent or broken lever can leave the seat stuck in one position." In our view, a lever that will not lock is a reason to stop riding and call the provider, not just to order a part; the safety section below gives the manuals' words.

## Sliding seat rails: moving the seat toward the tiller

A sliding seat lets you change the distance between the seat and the tiller without moving the post. The Victory manual says "You can reposition the seat forward or rearward to adjust the distance between the seat and the tiller," and prints the steps: "Move the seat sliding lever located at the lower left side of the seat outward," slide the seat, then release the lever. Shoprider's Sprinter XL manual says "Pulling up on the seat black slide lever allows the seat position to be adjusted forward or backward. Release the lever and the seat will lock in that position."

Not every seat has rails. The Victory 10 manual's specification table prints "Foldable Molded Plastic with Sliders" for the Victory 10 but "Foldable Molded Plastic" for the Victory 9; in our reading, without sliders. Of the Victory seat pages we read at Monster Scooter Parts, SET151622 is described as "no sliders", and the Ultra-Comfort seat prints 6 inch sliders. 

## Armrests: width, pads and the transfer warning

Armrests on the scooters we read about adjust in width and flip up. The Victory manual prints the steps: loosen the armrest adjustment knobs, pull the detent pins, slide the armrests, line up the holes, refit the pins and tighten the knobs. It adds "Pivot the armrests upward to aid in getting onto and off of your scooter." Shoprider's Sprinter XL manual says the hand knobs under the seat let the armrest be adjusted or removed for transport, and prints "DO NOT USE SCOOTER WITHOUT THE ARM RESTS BEING FITTED & SECURED."

In our view, the key warning is about weight. The Victory manual says "Avoid putting all of your weight on the scooter armrests and do not use the armrests for weight bearing purposes, such as transfers. Such use may cause the scooter to tip, resulting in a fall from the scooter and personal injury." Pride's Travel manual adds "Do not pick up the seat frame or scooter by the armrests. They are free to pivot, and you may lose control of the seat if they do so."

Pads and universal armrests on the seller pages we read: SETLRAM1190, a 12 inch pad for the Victory 9, Victory 10 and Rascal Conquest at $28.98; ARM153519, a 10 inch pad with 3-1/2 and 5-1/2 inch hole spacing for Go-Go, Zero Turn and Revo scooters, at $25.94, and the same part number listed "(Set of 2)" for the Go-Go Ultra X at $49.99; and a universal armrest set, 31005012, at $90.40. The universal set's page says its brackets "fit most mobility scooter and power chair seat bases" and that the armrests use 3/4 inch (external dimension) square tubes, and its compatible models list names two Vive scooters. In our reading, that is a seller's claim about a tube size, not a maker's fitment, so measure the tube.

## Safety lines: seat locked, swivel when stopped, weight capacity

These are the manuals' own words on the seat, with their conditions.

- Pride Victory Series manual, getting onto and off the scooter: "Make certain that the seat is secured into place." It also says "Remove the key from the key switch." and "Ensure that your scooter is not in freewheel mode." In its operation section, a line marked as a warning says "Never attempt to get onto or off of your scooter without first removing the key from the key switch."
- Pride Victory Series manual, getting off: step one is "Bring your scooter to a complete stop." Then "Power down your scooter and remove the key from the key switch." before you turn the seat, then "Make certain that the seat is fixed securely in position."
- Pride Victory Series manual, comfort adjustments: "Remove the key from the key switch before adjusting the tiller or the seat. Never attempt to adjust the tiller or the seat while the scooter is in motion."
- Pride Travel Scooter Series manual, same section: "Never attempt to adjust the tiller or the seat while the Travel Scooter is in motion."
- Pride's Scooter Consumer Safety Guide says, on transfers: "Make sure the seat is fixed securely in place." and "Before transferring, position yourself as far back as possible in the scooter seat to prevent the scooter from tipping forward during transfer."
- Pride's Scooter Consumer Safety Guide says, on seating: "If the weight capacity of the seating system and the scooter differ, always adhere to the lesser weight capacity."
- Pride Victory Series manual, weight limitations (marked mandatory): "Stay within the specified weight capacity for your scooter. Exceeding the weight capacity voids your warranty. Pride will not be held responsible for injuries and/or property damage resulting from failure to observe weight limitations."
- Shoprider Sprinter XL manual: "Do not exceed the suggested user weight limit. Doing so, could cause personal injury and invalidate the warranty." and "Make sure the tiller and seat are properly adjusted to the user or damage and injury could result." It also says "Before sitting in or exiting the scooter, REMOVE the key from the ignition."
- Golden Buzzaround XL manual, getting on: "Position the seat for safe and easy mounting. Ensure that the seat is facing forward." Getting off: "Make certain that the power is turned off and the key is removed." On weight it says "Exceeding the maximum weight rating may result in injury to yourself and/or others."
- Drive Scout manual: contact your authorized Drive Medical provider if one of the listed conditions occurs, including "Loose seat or seat components".

Pride's Consumer Safety Guide also says "Should the fittings on your seating system become loose, report the problem immediately to your authorized provider." In our view, the practical rule from these lines is simple: if the seat turns, rocks or lifts when it should be locked, stop using the scooter and have the provider check it before the next ride.

## Power seats and reclining backs

Some scooters raise the seat with a motor. The Victory Series manual, which also covers the Victory 9 PS, describes a power seat and prints strict rules. It says "The power seat is intended for operation only while your scooter is stationary and on a level surface." It says "Drive your scooter only with the power seat in the lowest position. Driving the scooter with the power seat elevated could cause instability in the scooter, resulting in a tip or a fall." And among its safety rules: "Operate the power seat only while completely stationary on level ground." and "Never place your scooter in freewheel mode with the power seat elevated."

For reclining backs, Pride's Consumer Safety Guide says "Do not recline the seat while driving or while on an incline or decline." and says not to negotiate inclines with the seat reclined. In our view, a power seat or its actuator is not a part to swap by mail; it belongs with the authorized provider.

## Upholstery and seat covers

In our view, when the seat frame and post are sound and the vinyl is torn, a cover set can be the cheaper fix. The seller pages we read list covers by model. Monster Scooter Parts listed Pride's SETBASE2563 seat base cover for the Victory 10 (SC610/SC710) at $148.49, and its page says it "includes a padded foam insert." For the 17 inch seat used on the Pride Revo, Pride Sonic and the Go-Go models those pages list, it listed Pride's SET151004 cover set at $141.98 and an AlveyTech aftermarket cover set at $59.39; the AlveyTech page says the covers "fasten with snaps" and that the set "does not include foam pads or other seating components." For Golden and Drive seats we did not open a cover page, so ask for the cover by the seat part number.

Universal slip-on covers are a different product. On the first Walmart.com results page for mobility scooter seat, read on 13 November 2026, 25 of the 46 distinct titles printed in Walmart's title-then-Price format (three sponsored scooter tiles at the top are not counted) were seat covers or seat protectors by our rule (the title has the word seat and the word cover or protector, and not the word storage). They ran from $10.69 to $17.49, and 17 of them printed "+ $4.00 shipping". None of the cover tiles names a scooter maker or model as a fit; in our reading they go over a seat and do not replace its upholstery.

Pride's Scooter Consumer Safety Guide has two lines on upholstery that apply to any cover. It says "Replace worn or damaged upholstery immediately to reduce the risk of fire hazard." And it says "Be aware that washing of upholstered items may reduce the resistance to flammability of the fabric." In our view, a slip-on cover over torn vinyl hides the damage rather than replacing it. For the deeper subject of seat upholstery on manual wheelchairs, see our [wheelchair seat upholstery guide](https://www.mobilitatlas.com/blog/wheelchair-seat-upholstery-guide.html).

## Mobility scooter seat cushions: what the documents allow

Can you put a cushion on a mobility scooter seat? Mobility Atlas read Pride's Scooter Consumer Safety Guide, CMS LCD L33789 and seller pages in November 2026. Pride's guide says "Do not remove the seat cushion supplied with the scooter. Do not place additional cushions, padding, or pillows on the seat cushion. This could cause an unstable position, resulting in a fall from the scooter." Monster Scooter Parts still lists add-on cushions: its collection page showed a gel seat cushion "for Wheelchairs and Scooters" at $12.36, and its return policy lists seat cushions among items sold as-is. Medicare's rule points the same way for people with skin or posture needs: L33789 says a scooter or a power wheelchair with Captain's Chair "is not appropriate for a beneficiary who needs a separate wheelchair seat and/or back cushion." In our view, if the built-in seat is not comfortable or safe for your skin, ask a seating clinician whether a scooter is still the right base.

The same LCD goes further. It says "If a skin protection and/or positioning seat or back cushion that meets coverage criteria (see Wheelchair Seating LCD) is provided with a POV or a power wheelchair with Captain's Chair, the POV or PWC will be denied as not reasonable and necessary." In our reading that is a US Medicare coverage rule, not a safety rule, but it tells you how Medicare sees a scooter seat: as a seat for people who do not need a separate pressure or positioning cushion.

Pressure care, posture and skin protection belong to a clinician, such as an occupational therapist, physical therapist or seating specialist. Our [wheelchair cushion guide](https://www.mobilitatlas.com/blog/wheelchair-cushion-guide.html) explains cushion types and what FDA reports describe; it is written for wheelchairs, and we make no claim that any of those cushions suit a scooter seat.

## Mobility scooter seat part numbers by model

This table lists the maker part numbers printed on the seller pages we read on 13 November 2026, with the models each page names. A part number belongs to the models on its page; we do not extend it to others. Where a page names a maker part number, the column says whose number it is.

| Maker part number the page prints | What it is | Models the page names |
| --- | --- | --- |
| SET147133 (Pride) | 18 x 18 in. black vinyl hi-back seat | Victory 10 SC610/SC710, Pursuit SC713, Zero Turn 10 |
| SET1800951 (Pride) | 20 x 20 in. hi-back seat | Victory 10, Pursuit SC713, Maxima SC901/SC941 |
| SET151622 (Pride) | 22 x 18 in. hi-back, no sliders | Victory 10, 10.2, 10 LX, LX Sport, Sport |
| SET2200727 to 30 (Pride) | Ultra-Comfort 16, 18, 20, 22 in. | Pursuit family, Victory 10, PX4, Wrangler |
| SETASMB5827 (Pride) | 17 in. wide molded seat | Go-Go and Pride Mobility Scooters (MSP title) |
| SET151005 (Pride) | 17 x 17 in. vinyl seat | Revo, Sonic, Star, Victory 3, Go-Go |
| FRMASMB11389 (Pride) | upper seat post, 8 position | Pursuit XL, Victory 9 and 10, Revo 2.0 |
| FRMASMB9630 (Pride) | upper seat post with pin | Go-Go Elite Traveller, LR, Plus, Plus HD |
| SN4-BLK-1816-106 (Golden) | 18 x 16 in. seat | Buzzaround XL GB116/GB117, LiteRider |
| MBH-BZ7-SEATP (Golden) | seat post, no lock pin | Buzzaround EX, LT, LX, XL |
| 1SAX06010 (Golden) | push-down swivel handle, 2010 on | Companion I and II, LiteRider (page also lists the Alante power chair) |
| SE1E403B (Golden) | swivel assembly, 7/8 in. post | Buzzaround Lite and XL, Companion, LiteRider |
| SC35045 (Drive) | 16-1/2 x 16 in. seat | Spitfire Scout SFSCOUT3/SFSCOUT4 |
| VENT-43 (Drive) | 20 in. captain's seat | Drive Ventura (page lists no models) |

Two notes on the table. The VENT-43 page prints a Compatibility heading with nothing under it, so the model rests on the title alone, and the page does not say whether the Ventura is a scooter or a power chair. Drive's Travel Scooters page (read 9 November 2026) lists a Ventura 4-Wheel Scooter; the VENT-43 page names no model, so confirm the Ventura model before ordering. And the MBH-BZ7-SEATP page says "This seat post does not include the seat lock pin," which is sold separately. For Go-Go seats in more depth, see our [Go Go scooter parts guide](https://www.mobilitatlas.com/blog/go-go-scooter-parts-guide.html); for tires, batteries and other parts, see our [mobility scooter parts guide](https://www.mobilitatlas.com/blog/mobility-scooter-parts-guide.html).

## What a mobility scooter seat costs in 2026

How much does a mobility scooter seat replacement cost? Mobility Atlas read the seller pages on 13 November 2026, and the answer depends on whether you need the whole seat or one part. Across 10 scooter seat assemblies at Monster Scooter Parts (US), the printed prices ran from $288.94 for Pride's 17 by 17 inch SET151005 to $931.48 for Drive's VENT-43 captain's seat; Pride's 18 by 18 inch Victory seat SET147133 was $328.98 and its 22 by 18 inch seat $495.94. Parts cost less: on the 10 seat-part product pages we opened, prices ran from $8.44 for a Victory seat lever to $170 for a swivel assembly under a Golden number, with upper seat posts under Pride numbers at $20.49 and $32.40. Prices for one part differ by seller: Pride's SETASMB5827 was $249 at SpinLife and $396.39 at Monster Scooter Parts. These are US prices before tax and shipping; prices differ by country, seller and funding, so ask for a written quote with delivery.

| Seat (part number) | Size as printed | Price printed |
| --- | --- | --- |
| SET147133 | 18 x 18 in. hi-back | $328.98 |
| SET1800951 | 20 x 20 in. hi-back | $338.98 |
| SET151622 | 22 x 18 in. hi-back | $495.94 |
| SET2200727-30 | 16 to 22 in. wide, 105 deg. | $357.99 |
| SETASMB5827 | 17 in. wide molded | $396.39 |
| SET151005 | 17 x 17 in. vinyl | $288.94 |
| SET151299 | 18 in. molded | $344.69 |
| SN4-BLK-1816-106 | 18 x 16 in. | $289.80 |
| SC35045 | 16-1/2 x 16 in. | $299.29 |
| VENT-43 | 20 in. captain's seat | $931.48 |

The table covers every scooter seat assembly we saved from Monster Scooter Parts: the product pages we opened and the three seat assembly tiles on the first collection page. We left out two seat pages whose text calls the vehicle a power chair: Golden's SM9-BLK-2018-605 for the Compass Sport ($473.40, with a second figure of $487.80 whose markup we did not check) and Shoprider's 800922-001-06 for the Streamer Sport ($462.00). The Ultra-Comfort row is the "From" price for the 16 inch width. A printed price is not a promise of stock; ask the seller to confirm it.

## Same seat, three sellers: where the price moves

Because Pride seats carry Pride part numbers, the same seat can be compared across sellers. These are the cases on the pages we read where two or three sellers printed the same Pride number on the same day.

| Part number | SpinLife | Walmart.com tile | Monster Scooter Parts | Gap |
| --- | --- | --- | --- | --- |
| SETASMB5827 | $249.00 ($346 struck) | $329.99 | $396.39 | $147.39 |
| SET151005 | $295.00 ($397 struck) | not on our page | $288.94 | $6.06 |
| SET147133 | not on our page | $420.16 | $328.98 | $91.18 |

The struck figures on SpinLife are the ones we checked in the page markup: each sits in an element styled with a line through it. The two Walmart.com figures come from search result tiles that name the part number in the title; the tiles do not name the seller, and we did not open the product pages, so we cannot tell you who ships them. SpinLife's product pages print "Ships in:" 5-7 business days for SETASMB5827 and 3-5 Business Days for SET151005; we did not open their Specs or Returns & Warranty tabs.

In our view, a gap of $147.39 on one part number is a reason to quote more than one seller and to compare return and warranty terms.

## Returns: why a seat can be hard to send back

At Monster Scooter Parts, many seat assemblies cannot be sent back. Its return policy, read on 13 November 2026, lists among items sold as-is: "All seat assemblies for Invacare, Jazzy, Jet, Pride & Shoprider scooters & power chairs; including seat bases and seat backs." It says "These seating products are special ordered and manufactured on an order by order basis and are not returnable." It then says "Seats for Go-Go scooters (made by Pride Mobility) and Golden Technologies scooters are excluded and are returnable." and that seat base covers and seat back covers are also returnable items.

The product pages do not all match that rule. The Golden SN4-BLK-1816-106 seat page, which the policy would treat as returnable, prints "This item is not returnable." So does the Golden MBH-BZ7-SEATP seat post page. When the policy page and the product page disagree, in our view, plan on the stricter line until the seller confirms in writing.

Two more lines from the same policy apply to any seat part. It says "Under no circumstances do we accept returns of new items that have been installed or used." And for items it accepts, "All items not covered below are subject to a 20% restocking fee when returned."

## Warranty: seat, post, swivel and upholstery, document by document

Warranty terms belong to the document that prints them. These are the seat lines in each one we read. In the four maker documents, upholstery is excluded.

| Document | Seat post | Swivel or seating | Upholstery and pads |
| --- | --- | --- | --- |
| Pride US scooter warranty insert, Rev H, July 2024 | Lifetime (structural frame) | Upholstery and Seating excluded | Excluded as wear |
| Golden Buzzaround XL manual warranty (REV.0915) | Lifetime limited | Seat Swivel Mechanism: one year | Upholstery, Armrest Pads excluded |
| Drive Scout owner's manual, REV5.9.1.15 | Limited lifetime | Upholstery and seating excluded | Excluded; defects on delivery only |
| Shoprider US warranty page | not listed (frame 5 years; 10 on E-Line) | not listed | Seat upholstery, arm pads excluded |
| Monster Scooter Parts warranty policy | 30 days (other store items) | as-is items excluded | not separately listed |

Pride's insert lists "Upholstery and Seating" among items that "may require replacement due to normal wear and tear". Drive's Scout manual lists "Upholstery and seating" under its warranty exclusions, and lists upholstery and seating among items it repairs or replaces only if found defective or damaged immediately after the product is removed from the box. Golden's manual covers the "Seat Swivel Mechanism" and armrests for one year and excludes "Armrest Pads" and "Upholstery". Shoprider's page says "This warranty does not cover plastic shrouding or covers, seat upholstery, arm pads or tires as these components are considered wear items."

The terms on who is covered differ too. Pride's insert covers the original purchaser. Golden's lifetime clause runs from purchase "from an authorized Golden Technologies' dealer". Shoprider's page says it is "applicable only to the original purchaser of the product from an authorized Shoprider provider" and that "Parts warranty is 3-months or the remainder of the unit warranty, whichever is longer." Monster Scooter Parts' policy says its 30 day warranty "does not include items specifically identified as not returnable as-is items on our Return Policy page." The policy excludes as-is items, yet the Pride seat pages we read print "This item has a 30 day warranty"; in our view, get the seller's warranty for that part in writing before ordering.

## Genuine, aftermarket and universal seats

The seller pages we read sell three kinds of seat part: genuine maker parts with the maker's number, aftermarket parts made for a named model, and universal parts. The makers' documents treat them differently.

- Pride's Scooter Consumer Safety Guide says "Do not use seating systems on your scooter that have not been tested or approved for your scooter. Using unapproved seating systems could affect the center of gravity of your scooter, resulting in a tip or a fall."
- Pride's warranty insert says its exclusions include components with damage or failure caused by "Parts/accessories that are not Pride original parts and are not purchased through an authorized Pride provider."
- Shoprider's warranty page: "This warranty shall be void if the Customer modifies the product in any respect including but not limited to the use of parts other than genuine Shoprider parts." Its manual says "Do not use parts or accessories that are not authorized by Shoprider® Mobility Products Inc."
- Golden's manual excludes damage caused by "Accessories other than those supplied or approved by Golden Technologies."

Some seller pages say a part is genuine. The SET151622 page says "genuine Pride Mobility" and the MBH-BZ7-SEATP page says "Genuine Golden Technologies OEM part". The AlveyTech cover page describes its own product as aftermarket. The SN4-BLK-1816-106 page points to an "aftermarket Universal Seat Assembly" for the Buzzaround XL as a lower-cost option; we did not open that page.

In our view, if a universal seat is the only option for an old scooter, ask the provider to fit it and to confirm in writing that it suits the scooter's weight capacity.

## Who should fit the seat: owner or provider

The documents give two answers, and both are Pride's. The Victory and Travel manuals print owner steps for seat rotation, sliding, armrest width and seat height. The Victory manual also says "An authorized Pride Provider or qualified technician must perform the initial setup of this scooter and must perform all of the procedures in this manual." And Pride's Consumer Safety Guide says "Only your authorized provider or a trained service technician should make adjustments to the seating system."

In our reading, the comfort steps in the manuals are for adjusting a seat that a provider has already set up, and a new seat, a new post or a change of seat size is a change to the seating system. Pride's guide also says "It is the responsibility of your authorized provider to evaluate your seating system and make any necessary adjustments to suit your specific requirements to prevent the scooter from tipping forward, backward, or to the side." Drive's Scout manual sends "Loose seat or seat components" to an authorized Drive Medical provider.

Lifting matters too. Golden's Buzzaround XL manual prints the seat as 22 lbs. with arms; the 2012 Victory manual prints 28 lbs. (12.7 kg) for the standard Victory seat; Pride's Pursuit 2 page prints 54.6 lbs. for its standard high-back seat. For repairs beyond the seat, see our [mobility scooter repair guide](https://www.mobilitatlas.com/blog/mobility-scooter-repair-guide.html).

## Taking the seat off for the car, and putting it back

The seat is the first piece to come off when a scooter is taken apart. The Victory manual says "Remove the seat by lifting it straight up and off of the scooter. If you encounter resistance when removing the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up on the seat." Golden's manual says "Grip the seat on opposite sides and, with a firm grip; pull the seat straight up." and suggests removing the arms first to reduce the weight.

For the car, Pride's Consumer Safety Guide says "all removable scooter parts, including the armrests, seat, and shrouds, should be removed and/or properly secured during motor vehicle transport." It also says "Do not attempt to lift or move your scooter or seating system by grasping or holding onto any of its removable parts, including the armrest(s), seat cushions, seatback, or shrouds." In our view, that means the seat travels secured on its own, not loose in the trunk, and nobody carries it by the armrests.

Putting it back is where a seat lock is easy to miss. Pride's Travel Scooter Series manual, in its assembly steps, says "Reinstall the seat and rotate it until it is secured into place." 

## FDA reports that mention the seat post or the swivel

On 13 November 2026 we ran two word searches of the openFDA device adverse event reports filed under product code INI, the code Pride's Victory scooters are filed under in the recall file we read. Of 2,730 INI reports, 17 contained the phrase seat post and 7 the word swivel; 1 report was in both, so we read 23 reports in full. They were received from 1998-10-30 to 2024-08-02, and openFDA printed a last_updated date of 2026-11-04. 11 name Pride as the maker, 10 name C.T.M., 1 names Shoprider and 1 names Permobil; 2 are voluntary reports and the rest are manufacturer reports.

FDA's own page about the database says "this passive surveillance system has limitations" and that the incidence, prevalence or cause of an event cannot be determined from it alone, "due to under-reporting of events, inaccuracies in reports, lack of verification that the device caused the reported event, and lack of information about frequency of device use." These are reports, not rates, and a word search misses reports that describe the same problem in other words. What a report says happened is what the reporter alleged.

We sorted the 23 reports by one written rule into five groups, and list every report number so the count can be checked. Where a report fits two rules, we applied them in this order: not a scooter seat event, injury while taking the seat off, seat post broke, lever or lock named, worn or loose. Report 1531186-2014-03329 names a worn post guide and the notches; we counted it under levers.

| Group (our rule) | Reports | Report numbers |
| --- | --- | --- |
| Seat post, its weld or sleeve stated to have broken | 6 | 2530130-2022-00097, 2530130-1998-00020, 2530130-1999-00013, 2530130-2001-00031, 2530130-2015-00013, MW1035809 |
| Swivel lever, seat lock, handle or notches named | 9 | 2530130-2024-00516, 2530130-2024-00519, 2530130-2017-00106, 2530130-2024-00345, 1531186-2014-00746, 1531186-2014-02651, 1531186-2014-03259, MW5074177, 1531186-2014-03329 |
| Worn, stripped, broken or loose post, hole or bracket, or play | 5 | 1531186-2013-02901, 1531186-2013-02999, 1531186-2014-03784, 1531186-2014-03855, 2530130-2017-00137 |
| Injury while taking the seat off | 1 | 1525712-2010-00164 |
| Not a scooter seat event: the word appears only in quoted manual text (1525712-2011-00399), or the device is a power wheelchair whose seat post was reported fractured (1221084-2007-00002) | 2 | 1525712-2011-00399, 1221084-2007-00002 |

Three reports show what the makers wrote back. In report 2530130-2022-00097 (a Maxima 4-Wheel), the provider alleged the weld on the seat post broke, and Pride's narrative says "IT WAS FOUND THAT ON THE LOWER SEAT POST WELDMENT (MEC1904971) THE WELD PENETRATION WERE INSUFFICIENT". In reports 2530130-2024-00516 (a Victory 10 4-Wheel, swivel lever alleged loose) and 2530130-2024-00519 (a Travel Pro ES; the provider alleged the scooter went too fast in a turn and threw the rider off), Pride's narrative says "THE HANDLE ON THE SEAT PLATE WAS BENT AND CAUSED THE LOCATING PEG NOT TO ALIGN PROPERLY WITH THE CLOVER LEAF ON THE SEAT POST" and calls the damage customer misuse. In report 2530130-2024-00345 (a Maxima 3-Wheel), the provider alleged the swivel lever "BROKE LOOSE ALLEGEDLY CAUSING THE SEAT TO SPIN" as the rider got off; Pride's narrative says the lever post was fractured and "IT IS UNKNOWN WHAT CAUSED THIS FRACTURE."

In our reading, the reports point at the same checks as the manuals: a bent seat plate handle, a lever that does not drop into its notch, a post that rocks in its tube. One report, 2530130-1999-00013, also records the rider's own statement that, when carrying groceries, they were over the scooter's maximum weight capacity. For the wider FDA picture on scooters, see our [mobility scooter guide](https://www.mobilitatlas.com/blog/mobility-scooter-guide.html).

## Recalls that name scooter seats

The openFDA recall file for product code INI that we read on 9 November 2026 (last_updated 2026-11-05) held 22 records. 7 of them, from 5 recall events, give a seat problem as the reason for recall (an eighth, Z-1941-2012 for the Victory 9 with Power Seat, names the seat only in its product description; its reason is a harness connector). They were initiated from 2007-03-22 to 2021-04-01; 1 is listed as "Open, Classified" and the others as "Terminated".

| Recall record | Firm and product | Reason as stored (short) | Status |
| --- | --- | --- | --- |
| Z-0174-2008, Z-0175-2008 | Electric Mobility: scooters, Turnabout chairs, Rascal 600 Series | seat lift actuator or seat post bolts; seat may wobble | Terminated |
| Z-0415 to Z-0417-2011 | Electric Mobility: Rascal LiteWay 214, 224, UltraLite 370B | seat base welding insufficient | Terminated |
| Z-0774-2012 | Invacare: Leo scooters | backrest fails due to seat flexing | Terminated |
| Z-1505-2021 | Merits Health Products: Scooter | seat baseplate pin broken in the field | Open, Classified |

The stored reasons are specific. For the Rascal LiteWay and UltraLite records, the file says "Scooter seat bases were found to have insufficient welding which may lead to the seat base becoming loose and causing the seat to wobble." Those three records cover 653 units in total by our addition. For the Invacare Leo, the action text says Invacare "has developed replacement seat kits intended to replace the original seats." For Merits, the stored action is a letter titled "MEDICAL DEVICE FIELD CORRECTION". In our view, if you own one of these models, ask the maker or provider whether the recall work was done before you order a seat, because the fix may be a seat kit.

## Medicare and scooter seats (US)

Medicare's scooter rules are covered in our [buying guide](https://www.mobilitatlas.com/blog/buy-mobility-scooter-guide.html); here are the seat lines. LCD L33789 (version 38, read on 9 November 2026) treats a scooter seat as the seat: it says a POV "is not appropriate for a beneficiary who needs a separate wheelchair seat and/or back cushion", as quoted above.

For repairs on a scooter Medicare paid for, the Medicare booklet on durable medical equipment (read on 9 November 2026) says that if you own your equipment, "the supplier who sold it to you isn't required to repair it." It also says "If you own Medicare-covered DME and other devices, Medicare may also cover repairs and replacement parts." and that "Medicare will pay 80% of the Medicare-approved amount (up to the cost of replacing the item) for repairs." It adds "You pay the other 20%. Your costs may be higher if the supplier doesn't accept assignment." The booklet's renting section says you pay 20% "after you pay your Part B deductible for the year"; ask the supplier whether it accepts assignment. If you rent, it says "your supplier must maintain and repair the equipment". We did not read Medicare Advantage, Medicaid or VA rules on seats; ask the plan before you order a seat you hope it will pay for.

## Ordering a mobility scooter seat through Mobility Atlas

Mobility Atlas can find and quote a mobility scooter seat for you, including seats, posts, levers and covers that are not listed on our pages. You send an enquiry or a part request with the scooter model, the serial number and the part, we reply with a written quote that includes delivery to your country, and nothing is charged before you accept it.

To quote a seat, we need what a seller needs: the scooter make and model number, the serial number (on Pride scooters, the label on the seat post), the seat part number if you can find it, the seat width and depth you have now, the post size, which pieces you need (seat, armrests, headrest, belt, plate, levers, covers), and the country it should go to. Photos of the seat plate and lever help. 

## Three traps

Trap one: ordering by width alone. Three seat pages for the Victory 10 family print 18 by 18, 20 by 20 and 22 by 18 inches, Pride's own pages print 18 by 17, and one of those seats has no sliders. The post, plate and lever have to match too, and three pages print three metric figures for a 1 inch post. Order by part number and model number, with the fit confirmed in writing.

Trap two: assuming you can send it back. Monster Scooter Parts lists Pride, Jazzy, Jet, Invacare and Shoprider seat assemblies as sold as-is and not returnable (its policy excludes Go-Go and Golden seats and seat covers from that rule, though some product pages still print "This item is not returnable"), and its policy refuses parts that have been installed. A seat that arrives in the wrong size can be a sunk cost. Check the return line on the product page and in the policy, and use the stricter one.

Trap three: adding padding to fix comfort. Pride's guide says not to place additional cushions, padding or pillows on the seat cushion, and Medicare's LCD L33789 says a scooter "is not appropriate" for a beneficiary who needs a separate seat or back cushion, for coverage purposes. If the seat hurts, the question is for a clinician, not for a $12 cushion.

## Three composite scenarios

These are composite scenarios, not individual customers. Each uses only the documents for that scooter.

Scenario one: a Victory 10 rider who wants a wider seat. Pride's Victory 10 specification pages print an 18 by 17 inch standard seat and a 400 lbs. weight capacity. Monster Scooter Parts lists Pride's 22 by 18 inch SET151622 for the Victory 10 at $495.94, with no sliders, and lists Pride seat assemblies as not returnable. The rider measures the current seat, notes the serial number from the seat post, and asks the Pride provider to confirm the part and fit it, since Pride's guide says seating adjustments belong to the provider. The seat page prints no seat weight capacity, so they ask the provider for it and keep to the lower of that and the scooter's 400 lbs.

Scenario two: a Go-Go Elite Traveller whose seat will not lock. The rider notices the seat turns when it should be locked. Pride's Travel Scooter Series manual asks "Is the seat secured into place?" before each ride, and Pride's guide says "Should the fittings on your seating system become loose, report the problem immediately to your authorized provider." So the scooter stays parked. Monster Scooter Parts lists the DWR9998C016 seat release lever for the Elite Traveller (SC40E/SC44E) at $15.99 and warns that the similar full-size lever is not interchangeable; the provider checks the plate and post before the new lever goes on.

Scenario three: a Golden Buzzaround XL 3-Wheel (GB117) owner who wants the optional seat size. Golden's Buzzaround XL manual prints an 18 by 16 inch standard seat and a 20 by 18 inch optional seat, both Stadium Style, with a weight capacity of 300 lbs. (325 lbs. on HD models). Monster Scooter Parts lists the 18 by 16 inch SN4-BLK-1816-106 for the GB116/GB117 at $289.80 with a 7/8 inch post, and its page says "This item is not returnable." The owner asks the Golden dealer for the optional seat's part number and post size in writing before ordering, because none of the seller pages we read listed the 20 by 18 inch seat (the one Golden 20 by 18 inch seat we saw, SM9-BLK-2018-605, is listed as unique to the Compass Sport power chair, so it is not that seat).

## What to ask the seller, the provider and the clinician

### The seller

- Does this part number fit my model number and serial number? Please confirm in writing.
- Is this the whole assembly? Which of armrests, headrest, belt, plate, levers and post are included?
- What post diameter and height does this seat take, in inches and millimeters?
- Is this seat returnable if it does not fit, and is there a restocking fee? What does the warranty cover, and for how long?

### The provider or dealer

- Is the seat lock, plate and post on my scooter sound, or does the post need replacing too?
- Will a wider or higher-back seat change the scooter's balance, and will you fit and set it?
- Has any recall work on my model been done?

### The clinician

- Is a scooter seat still right for my posture and skin, or do I need a different base?
- Do I need a positioning belt, and how should it sit?
- If I need a pressure or positioning cushion, what does that mean for my scooter?

## Sources and documents

Makers' documents, each with the date we read it, are listed in How we checked above: Pride's Victory and Travel manuals, Safety Guide, warranty insert, specification pages and serial number article; Golden's Buzzaround XL manual; Drive's Scout manual and Travel Scooters page; Shoprider's Sprinter XL manual and US warranty page.

Seller pages, all read on 13 November 2026 (US): Monster Scooter Parts Seating Components collection (page 1 of 19), product pages and its warranty and return policies; SpinLife search for scooter seat (page 1) and two seat pages; Walmart.com search for mobility scooter seat (page 1).

Government records: CMS LCD L33789, version 38 (revision effective 10/01/2025), and the Medicare booklet Medicare Coverage of Durable Medical Equipment & Other Devices, read on 9 November 2026; FDA's page about the MAUDE database and the openFDA recall file for product code INI, read on 9 November 2026; openFDA device event word searches for seat post and swivel, read on 13 November 2026.

Method, in short: we read each document as text, quoted it word for word, and computed every count, range and difference by script from the saved pages. We did not test any seat or contact any maker or seller. Prices checked November 2026, on 13 November 2026, in US dollars before tax and shipping. Documents checked November 2026, on the dates given above.

## Common questions

### What is a captain seat on a mobility scooter?

Seller titles use captain's seat for some full seat assemblies; the one such page we read that lists contents (SM9-BLK-2018-605) says the armrests are not included. Shoprider's Sprinter XL manual lists a reclining captain's seat on two Deluxe models and the Jumbo XL; Pride's pages describe their seats as compact foldable, limited reclining high back or depth-adjustable high-back instead. Medicare's LCD L33789 uses Captain's Chair for power wheelchairs with that kind of seat.

### Can I put a bigger seat on my mobility scooter?

Sometimes, if the maker offers one for your model. For the Victory 10 family, Monster Scooter Parts lists Pride's 22 by 18 inch SET151622, 4 inches wider than the standard 18 inch seat, without sliders. Pride's safety guide says not to change your seating configuration without first contacting your authorized provider, and to use the lesser of the seat and scooter weight capacities.

### What size is a mobility scooter seat post?

It depends on the model and on which post you mean. Seller pages print 1 inch upper posts for Pride Victory, Pursuit and Go-Go seats (with 24.3, 25 and 26 mm on three pages), a 7/8 inch (22 mm) post under some Golden seats, and a 12-3/8 inch long, 1-5/16 inch seat post for Golden Buzzaround models (in our reading, the post in the frame). Measure yours and order by part number.

### Is a mobility scooter seat covered by warranty?

In the Pride, Golden and Drive documents we read, the seat post is; in all four maker documents, upholstery is not. Pride's US insert covers the seat post for the lifetime of the product to the original purchaser and excludes upholstery and seating as wear. Golden covers the seat post for life and the seat swivel for one year. Drive covers the seat post with a limited lifetime warranty. Shoprider excludes seat upholstery and arm pads.

### Can I add a cushion to my scooter seat?

Pride's Scooter Consumer Safety Guide says not to remove the supplied seat cushion and not to place additional cushions, padding or pillows on it, because this could cause an unstable position and a fall. If the seat is not comfortable or safe for your skin, ask a seating clinician; Medicare's LCD L33789 says a scooter "is not appropriate" for a beneficiary who needs a separate seat or back cushion, for coverage purposes.

### Where can I buy a mobility scooter seat replacement?

From the scooter's provider, from parts sellers such as Monster Scooter Parts and SpinLife, or through Mobility Atlas, which can find and quote seats that are not on our pages, with a written quote including delivery and nothing charged before you accept. Prices differ by country, seller and funding; the US figures in this guide are from 13 November 2026.

## Sources

- Pride Mobility: Victory Series owner's manual, INFMANU3629 Rev I (read 13 November 2026): https://www.pridemobility.com/pdf/owners_manuals/us_scooter/us_victory_10_om.pdf
- Pride Mobility: Scooter Consumer Safety Guide (read 13 November 2026): https://www.pridemobility.com/pdf/owners_manuals/safety_guides/sc_consumer_safety_guide.pdf
- Pride Mobility: Travel Scooter Series owner's manual, INFMANU4392 Rev R: https://www.pridemobility.com/pdf/owners_manuals/us_scooter/us_fc_sp_universal_travel_scooter_series_om.pdf
- Pride Mobility: US scooter limited warranty insert, Rev H July 2024: https://www.pridemobility.com/pdf/resourcecenter/infinfb3056_us_all_scooters_english_sp_warranty_insert.pdf
- Pride Mobility: Victory 10 4-Wheel specifications: https://www.pridemobility.com/pride-mobility-scooters/victory-10-4-wheel/specifications.asp
- Pride Mobility: Pursuit 2 specifications: https://www.pridemobility.com/pride-mobility-scooters/pursuit-2/specifications.asp
- Pride Mobility: Maxima 4-Wheel specifications: https://www.pridemobility.com/pride-mobility-scooters/maxima-4-wheel/specifications.asp
- Pride Mobility: How to find the serial number on your Pride device: https://experience.pridemobility.com/lift-chair-recliners/faqs-for-lift-chair-recliners/how-to-find-the-serial-number-on-your-pride-lift-chair-and-other-devices/
- Golden Technologies: Buzzaround XL Series owner's manual (copy on a seller file server): https://cdn.shopify.com/s/files/1/1732/6501/files/Golden-Buzzaround-XLS-GB117S-User-Manual.pdf
- Drive Medical: Scout Owner's Manual REV5.9.1.15: https://shop.drivemedical.com/medias/1734-1?context=bWFzdGVyfGltYWdlc3wxNDc2MzQ4fGFwcGxpY2F0aW9uL3BkZnxhRFExTDJobE5DOHhNall5TXpZME16STBOall5TWk4eE56TTBMVEV8ZDgzZWRjMWJmMGQ5ZDlmMDZjN2M4MWZlMTNmZTU3MWFhMDM1Yjc4OGY5MGE2NjY2YmI1ZWRkMWUzM2Q4Nzg3ZA
- Drive Medical: Travel Scooters category page (read 9 November 2026): https://shop.drivemedical.com/us/en/Products/Mobility/Power/Scooters/Travel-Scooters/c/TravelScooters
- Shoprider: Sprinter XL user manual, P/N 300904-08-A2: https://static.spacecrafted.com/ac2b624eb5c246fb97ed1076e3bb433b/r/cc18ec28526e428789db56acb1488eb4/1/Sprinter%20XL4%20Sprinter%20XL3%20DLX%20Sprinter%20XL4%20DLX.pdf
- Shoprider: Warranty information (US): https://shoprider.com/resources/warranty-information
- Monster Scooter Parts: Seating Components collection, page 1: https://monsterscooterparts.com/collections/mobility-scooters-seating-components
- Monster Scooter Parts: SET147133 Victory 10 seat assembly: https://monsterscooterparts.com/products/18-x18-black-vinyl-hi-back-seat-assembly-for-the-pride-victory-10-sc610-sc710-pursuit-sc713-scooters
- Monster Scooter Parts: SET151622 22 x 18 in. Victory seat: https://monsterscooterparts.com/products/22-x18-hi-back-black-vinyl-seat-assembly-for-the-pride-victory-10-sc610-sc710
- Monster Scooter Parts: FRMASMB11389 upper seat post: https://monsterscooterparts.com/products/upper-seat-post-pride-pursuit-xl-vic9-10
- Monster Scooter Parts: 1SAX06010 Golden swivel handle: https://monsterscooterparts.com/products/push-down-seat-swivel-handle-for-golden-technologies-scooters-2010-after
- Monster Scooter Parts: SN4-BLK-1816-106 Golden Buzzaround XL seat: https://monsterscooterparts.com/products/17-x17-black-seat-assembly-for-the-golden-buzzaround-xl-gb116-and-literider-ptc-gp162
- Monster Scooter Parts: return policy: https://monsterscooterparts.com/policies/refund-policy
- Monster Scooter Parts: warranty policy: https://monsterscooterparts.com/pages/warranty-policy
- SpinLife: 17 in. wide folding seat assembly SETASMB5827: https://www.spinlife.com/Pride-17inch-Wide-Folding-Seat-Assembly-for-Pride-Travel-Scooters-Seating/spec.cfm?productID=93070
- SpinLife: 17 in. seat assembly with Pride logo SET151005: https://www.spinlife.com/Pride-17inch-Black-Vinyl-Seat-Assembly-with-Pride-Logo-for-Pride-Travel-Scooters-Seating/spec.cfm?productID=109406
- Walmart.com: search results for mobility scooter seat: https://www.walmart.com/search?q=mobility+scooter+seat
- CMS: LCD L33789 Power Mobility Devices, version 38: https://www.cms.gov/medicare-coverage-database/view/lcd.aspx?lcdid=33789&ver=38
- Medicare: Medicare Coverage of Durable Medical Equipment & Other Devices: https://www.medicare.gov/publications/11045-medicare-coverage-of-dme-and-other-devices.pdf
- openFDA: device adverse event reports, product code INI, total: https://api.fda.gov/device/event.json?search=device.device_report_product_code:INI&limit=1
- openFDA: device adverse event reports, product code INI, word search seat post: https://api.fda.gov/device/event.json?search=device.device_report_product_code:INI+AND+mdr_text.text:%22seat+post%22&limit=17
- openFDA: device adverse event reports, product code INI, word search swivel: https://api.fda.gov/device/event.json?search=device.device_report_product_code:INI+AND+mdr_text.text:swivel&limit=7
- openFDA: device recalls, product code INI: https://api.fda.gov/device/recall.json?search=product_code:INI&limit=100
- FDA: About the MAUDE database: https://www.fda.gov/medical-devices/mandatory-reporting-requirements-manufacturers-importers-and-device-user-facilities/about-manufacturer-and-user-facility-device-experience-maude-database

Read on 13 November 2026. The wording of the article is our own.

## About the author

Mobility Atlas is run by Anna, who has used a wheelchair for 19 years, since she was ten. She started it because she always wanted one place where a person who needs a chair, a wheel, a cushion or a spare part can see everything that is made, side by side, and simply ask for it. She reads and answers every enquiry herself.

Contact: anna@mobilitatlas.com, WhatsApp +66 65 398 9085. Canonical facts about Mobility Atlas: https://www.mobilitatlas.com/about/facts.html
