# Quickie wheelchair parts in 2026: Sunrise Medical part numbers for the Nitrum, Quickie 2 and older Quickie chairs, wheel locks, casters, axles, footrests, upholstery, prices and warranty

Source: https://www.mobilitatlas.com/blog/quickie-wheelchair-parts-guide.html
By Anna, founder of Mobility Atlas (https://www.mobilitatlas.com/about/). Published 13 November 2026.

Quickie parts and Sunrise Medical parts: how Sunrise sells them, serial labels, catalog part numbers by model, wheel locks, casters, axles, footrests, upholstery, prices, warranty.

## In short

- Sunrise Medical does not sell Quickie parts to riders: its US FAQ says "we cannot sell spare parts directly" and sends buyers to its authorized dealerships, while its online spare parts catalog shows the part numbers and a price column for each chair.
- Read the serial label first. Sunrise's catalog splits Nitrum forks at "QNI-020000 & QNH-015000", GP hangers at "S/N GP-96451" and Quickie 2 parts by "S/N Prefix Q2X"; the Nitrum manual puts the label "on the right side of frame cross brace next to the hand grip".
- On 13 November 2026 the catalog's unlabeled price column, which Sunrise does not say is a retail price, showed complete one-side Nitrum wheel lock rows at $55.00 to $143.00, Nitrum caster wheels at $65.00 to $263.00 and Quickie 2 swing-away hangers at $128.00 to $270.00 a side; the 11 Sportaid tiles that name Quickie ran from $3.95 to $278.00.
- The Nitrum and Quickie 2 manuals warrant Sunrise-made parts for one year, exclude tires, tubes, upholstery, pads and grips, and leave labor to the owner; the Nitrum manual says its warranty "applies in the USA only", the Quickie 2 manual "in the USA and Canada only".
- Setup parts (axle position, footrest angle, seat and back) change how a rider sits: both manuals send those changes to a health care provider, so agree them with the rider's therapist before ordering.

## The short answer

Quickie wheelchair parts come from Sunrise Medical, the company that makes Quickie chairs, but in the US Sunrise does not sell them to riders. Its after-sales FAQ says: "Spare parts are available via our network of authorized dealerships. Please visit our Dealer Locator tool to find your nearest dealer. Unfortunately we cannot sell spare parts directly." What Sunrise does publish is an online spare parts catalog for its US chairs, with a part number, a description and a price for each piece, sorted by model and by part group. This guide reads that catalog for the Quickie Nitrum and Quickie 2, the two Quickie chairs we went deepest on, and sets it beside the owner's manuals, the warranty pages and the Quickie parts pages of three US sellers.

How do you buy Quickie wheelchair parts? Start with the chair's serial number and model, because Sunrise's own parts catalog splits some parts by serial number. Mobility Atlas read that US catalog, two Quickie owner's manuals, Sunrise's US and UK support pages and its freight and return policy, plus Quickie parts listings at Sportaid, SpinLife and WheelchairBearings.com, between 9 and 13 November 2026. On those pages a Quickie part has a Sunrise article number such as SZ500274 for a right-hand push-to-lock wheel lock on the Nitrum, a side (left, right or pair) and sometimes a serial-number boundary, such as Nitrum forks listed "prior to QNI-020000 & QNH-015000" and "after" it. Sunrise's FAQ sends riders to a dealer for parts, and Sportaid's Quickie parts pages ask for the make, model and serial number before they process some orders. In our view, write those down, photograph the old part and name the part group before you ask anyone for a price.

The prices differ by route. Sunrise's catalog shows a price column; its FAQ sends buyers to a dealer, and its Freight and Return Policy, which it says applies "to all Sunrise Medical (US) LLC customers", lists "All Parts Orders: $34.95 handling fee". Sellers print their own prices: Sportaid listed its Quickie push-to-lock wheel locks at a "Cost" of $85.00 a pair, while the Nitrum push-to-lock rows in Sunrise's catalog show $55.00 for each lock without an extension handle (the catalog's unlabeled price column, which Sunrise does not say is a retail price). The sections below go part group by part group, then cover warranty, returns, recalls and how to order.

Two decisions are not parts decisions. Where the rear axle sits, how the footrests are set and which seat and back a rider uses change balance and posture, and both manuals we read send those changes to a health care provider or healthcare advisor. Which setup suits a rider is for their physical therapist, occupational therapist or seating clinician to decide; this guide explains the parts and what to ask, and then stops.

## How we compared, and our interest

Mobility Atlas earns a fee or margin when you order through us; the comparison below uses only Sunrise Medical's published catalog, manuals and policies, US sellers' listings, public FDA and Medicare records and, where named, rows of our own catalog. We did not buy, fit or test any Quickie part, and we did not ask Sunrise or any seller a question.

Our method was simple. On 13 November 2026 we opened each page named below in a browser and saved its text, with the address and the date, before writing. For Sunrise's parts catalog we copied the rows of each assembly table cell by cell: position, article number, description, remark and price. For the Quickie 2/2HD owner's manual (MK-100070 Rev. G) we extracted the PDF's text in the browser and saved the pages on wheel locks, axles, tires, upholstery, footrests, dealer service and warranty. The Quickie 2HP owner's manual linked from the same Sunrise page has a scrambled text layer, so we quote nothing from it. A few documents were saved earlier by our team and keep their own read dates: Sunrise's Quickie Nitrum owner's manual (249817 Rev. E) and Medicare's booklet and coverage page were read on 9 November 2026, and Sportaid's Quickie seat and back upholstery pages on 12 November 2026. Where we did arithmetic, such as a pair price from a per-lock price, a script computed it from the saved text.

Where two documents give different figures or wording for the same thing, such as where the serial label sits or where the warranty applies, we give both and say which document printed which. A part number belongs to the model, side and catalog heading it is printed under; we never say a part fits a chair that its page does not list. Prices checked November 2026. Documents checked November 2026.

## The Quickie chairs this guide covers

Sunrise's US spare parts catalog, read on 13 November 2026, opens with 16 top-level folders, 4 of them for Quickie: power wheelchairs, folding, rigid and tilt-in-space. Inside them we counted 27 model folders: 14 under power (13 chair folders plus SWITCH-IT), 6 folding, 4 rigid and 3 tilt-in-space. Two folding folders are marked discontinued: "QUICKIE 2 LITE EIQ2X (S/N Prefix Q2XL) Discontinued" and "QUICKIE XENON 2 Discontinued". The table shows where each chair named in this guide turned up in the documents we read.

| Chair | Where its parts appear in what we read | Depth here |
| --- | --- | --- |
| Quickie Nitrum (rigid) | US catalog folder, 14 part groups; manual | Full |
| Quickie 2 (folding) | US catalog folder, 18 part groups; manual | Full |
| Quickie 2HP | Q2 catalog hardware row; Sportaid options | Brief |
| Quickie GP, GPV | US catalog GP SERIES folder; Sportaid | Brief |
| Quickie GT, GTi | Sportaid options; FDA recall record | Brief |
| Quickie Q7 (QM-7 not found) | Sportaid options; FDA recall records | Brief |
| Quickie Xenon 2 | US catalog, marked discontinued | Brief |
| Krypton, Argon2, Life R | Sunrise UK page; our catalog rows | Brief |
| Q500 M and Q700 M power | US catalog Q500 M PRO folder; recall | Brief |

The Nitrum folder lists 8 wheel lock assemblies, 10 caster and fork assemblies and part groups from FRAME to ACCESSORIES; the Quickie 2 folder, titled "QUICKIE 2 EIQ2X (S/N Prefix Q2X, Q2H/Q2HX)", splits footrests into five folders, from swing-in-out hangers to the Z-Finity system. We did not find a QM-7 on any page we read; the Q7 appears on seller option lists and in FDA recall records, which the sections on older models and on recalls cover. For what each chair is, what it costs new and how it is ordered, see our [Quickie guide](https://www.mobilitatlas.com/blog/quickie-guide.html) and our [Sunrise Medical guide](https://www.mobilitatlas.com/blog/sunrise-medical-guide.html); this page stays on parts.

## How Sunrise sells Quickie parts: dealers, the catalog and the policies

Sunrise's US pages describe a dealer route for riders and an online catalog and ordering system on its Dealer and Clinician Resources page. Its Dealer and Clinician Resources page lists a "Spare Parts Catalog" with the line "Online parts ordering for Sunrise Medical", next to "My Sunrise", which it describes as a place to "Create and revise quotes, place orders". Its after-sales FAQ, as quoted above, says Sunrise "cannot sell spare parts directly" and points riders to its dealer network. Its support page says that if a problem occurs, "the Sunrise Medical dealership where you originally bought your product from is your first point of call", and gives 1-800-333-4000 for those who cannot remember where they bought the chair.

The catalog itself opened without a login when we read it. Each assembly page shows a table with the columns Pos, Article no., Description, Remark and Price. The page does not say whether the price column is a list price, a dealer price or a suggested retail price, and Sunrise's FAQ says it does not sell parts directly, so in our reading the catalog is a reference that a rider can use to name a part and its number, and a dealer is the party that orders it. We did not add anything to the cart or sign in.

Sunrise's Freight and Return Policy, which the page says applies "to all Sunrise Medical (US) LLC customers, effective June 29, 2026", sets the terms for its customers. It says "All Parts Orders: $34.95 handling fee", that its freight terms "apply only to business-to-business shipments", and that "Market value freight charges will be billed for residential deliveries." On returns it says: "If you are the end user of the product, your return must be channeled through an authorized Sunrise Medical supplier (dealer)." These are Sunrise's terms with its customers; what a dealer charges a rider for the part, the handling and the fitting is the dealer's own price, so ask for it in writing.

Sunrise Medical's UK site gives the same answer for the UK. Its Maintenance and Support FAQ says: "Spare parts are available via our network of authorised dealerships. Please contact us to find your nearest one. Unfortunately we cannot sell spare parts direct." The Quickie 2 manual points dealers to the US site for help: "Go to www.sunrisemedical.com for parts manuals, instruction sheets, and instructional videos that will aid in the repair of the Quickie 2 Family of wheelchairs." The general steps of finding any wheelchair part, from label to part group, are in our [wheelchair parts guide](https://www.mobilitatlas.com/blog/wheelchair-parts-guide.html); the sections below apply them to Quickie.

## Find the serial number first

Every route to a Quickie part starts with the serial number. Sunrise's Serial Number Lookup page, linked from its resources page with the words "Enter a Serial Number to view a product's original specifications", says: "Serial Numbers begin with two or three letters and a dash; i.e. GPS-00111". We entered nothing into it.

Where the label sits depends on the document. The Nitrum manual's warranty page says: "Serial Number label is located on the right side of frame cross brace next to the hand grip". Sunrise UK's FAQ on its lightweight wheelchairs page gives a general rule: for folding manual wheelchairs "your serial number will be on the cross-brace (the folding bars underneath the seat of your wheelchair)", for rigid manual wheelchairs "the serial number will be on the rear side of the frame", and for power wheelchairs it "can be located on the chassis/drive base of the chair." In our view, for a Nitrum look at both places the two documents name. The Quickie 2 manual has a line for the "Serial #:" in its introduction but, on the pages we saved, does not say where the label is.

The serial number matters for parts because Sunrise's catalog uses it to split assemblies. In the Nitrum folder the multiple-position fork appears twice, as "MULTIPLE POSITION FORK prior to QNI-020000 & QNH-015000" and "MULTIPLE POSITION FORK after QNI-020000 & QNH-015000", with different parts in each. The GP SERIES folder splits its swing-away hangers, elevating legrests and ALR hangers at "S/N GP-96451". The Quickie 2 folder names its serial prefixes in its title ("S/N Prefix Q2X, Q2H/Q2HX") and has assemblies headed "After S/N Prefix Q2X". The catalog does not say which letters belong to which build beyond these headings, so in our view read the prefix and the number off the label and give both to whoever quotes the part.

Keep the label on the chair. The Nitrum and Quickie 2 manuals both say: "This warranty is VOID if the original chair serial number tag is removed or altered." Sportaid's Quickie back upholstery page, read on 12 November 2026, adds a seller's reason: "Orders placed without a wheelchair serial number cannot be guaranteed." Serial-number formats for other brands are in our [wheelchair parts guide](https://www.mobilitatlas.com/blog/wheelchair-parts-guide.html).

## Reading a Sunrise part number

Which Quickie part number do you need? The one printed in Sunrise's catalog under your chair's model, part group and assembly, on the row whose remark matches your side and setup. Mobility Atlas read the Nitrum and Quickie 2 folders of Sunrise's US catalog on 13 November 2026, and one row can carry a lot. The Nitrum push-to-lock table has 16 lock rows that differ only in side, direction, length and handle: "WL LOCK THREADED PUSH R FWD SHT" is SZ500274 at $55.00, the left-hand version is SZ500275, and "WHL LOCK THRED PUSH R FWD SHT W EXT", with an extension handle, is SZ500258 at $97.00. Remarks add what the description leaves out, such as "left/right usable", "PAIR", "parts for 1 side, left or right" or "Use with wheels at 3 or 6 deg". The catalog does not explain why many numbers end in S, so in our view copy each number exactly and quote its heading.

The same number can appear under more than one chair. All 19 SZ-series numbers in the Nitrum push-to-lock table also appear in the Quickie 2 high mount push wheel lock table, at the same prices. That is what each catalog page prints. In our reading it does not mean every Quickie lock fits every Quickie frame, because the clamp rows differ: the Nitrum table uses "WHL LOCK CLAMP OVAL" (76806005S, $75.00, "left/right usable") and the Quickie 2 table uses "WHL LCK CLMP ASM" (107639S, $53.00) or a long version (122448S, $88.00).

### What the catalog columns mean

- Pos: the item number on the assembly drawing. Several rows can share one position when they are versions of the same piece, and, in our reading, a range such as "1-13A" marks a row that is a whole sub-assembly.
- Article no.: Sunrise's part number. Rows such as "ASSY-HNG-FP" at $0.00 in the Quickie 2 hanger tables are labels for an assembly, not something to order on their own.
- Description: Sunrise's short name, often abbreviated (FWD for forward, REV for reverse, SHT for short, LNG for long, W EXT for with extension, in our reading of the rows).
- Remark: side, pack size, serial or setup limits; for example, the catalog page says "Includes 2 bearings for one side only" under the fork bearing kit 159434.
- Price: the figure the catalog shows, in US dollars, with no label saying what kind of price it is.

Seller pages use Sunrise's numbers too, but not always in the same form. SpinLife's category tile prints "(Model No. 400103)" for a 5 inch soft roll caster under the brand "Sunrise / Quickie"; Sunrise's Nitrum caster table lists "400103S" as "5 Inch CASTER SOFT ROLL W/BRNGS". The descriptions match, but neither page links the two numbers, so in our view treat them as the same item only after the seller confirms it in writing.

## Wheel locks: Nitrum and Quickie 2 part numbers

The Nitrum folder lists eight wheel lock assemblies: standard push-to-lock, compact, compact direct mount, a knee lever lock, the Ergo scissor lock, the Eagle compact lock and the Nitrum's own threaded push-to-lock and pull-to-lock locks. Across those eight tables we counted 84 rows, priced from $8.00 (a hardware pack, "2 each") to $210.00 (an Eagle lock mechanism sold as a "Pair, Forward, Black"). The Quickie 2 folder lists seven assemblies, from high mount push and pull locks to a grade aid, a unilateral one-hand lock and an extension handle, with rows from $6.00 (a screw) to $785.00 (unilateral one-hand push locks, such as 902186, "RH SHOWN 15 -18INCH WIDE").

| Catalog row (Sunrise US) | Article no. | Remark | Price |
| --- | --- | --- | --- |
| Nitrum: push lock, right, forward, short | SZ500274 | none | $55.00 |
| Nitrum: same with extension | SZ500258 | none | $97.00 |
| Nitrum: pull lock, left, reverse, short, ext | SZ500269 | Left | $92.00 |
| Nitrum: oval lock clamp | 76806005S | left/right usable | $75.00 |
| Nitrum: extension kit | 161930 | PAIR | $42.00 |
| Nitrum: Ergo scissor lock, right | 104726-001S | right | $111.00 |
| Quickie 2: lock clamp | 107639S | none | $53.00 |
| Quickie 2: push grade aid, right | 107666S | RIGHT (Push) | $131.00 |
| Quickie 2: compact brake, left | 66006100-301S | Left side Forward Mounted | $122.00 |

Read the side and direction carefully. In the Nitrum pull-to-lock table 6 of the 8 locks with an extension are $97.00, but the left reverse versions, SZ500269 and SZ500273, are $92.00. The Quickie 2 unilateral table lists "REMOTE LOCK ASSEMBLY RIGHT" with the remark "Mounts on left side", and the left one with "Mounts on right side"; that is how the catalog prints them, and in our view it is a reason to name the part number, not the side, when you order. The standard push lock rows in the Nitrum folder are $98.00 each, and their clamp support kits are split by camber: "Use with wheels at 0 deg, 1 spacer" or "Use with wheels at 3 or 6 deg, 2 spacers".

A pair costs more than one row. Two Nitrum short forward push locks, SZ500274 and SZ500275, add up to $110.00 (the catalog's unlabeled price column, which Sunrise does not say is a retail price), or $260.00 with two oval clamps, by our arithmetic. The same table also lists threaded mounting bars ($45.00) and a fastener kit ($26.00) as separate positions; the catalog does not say which of these a replacement needs, so ask the dealer for the full parts list. Sportaid's "Quickie Push to Lock Wheelchair Brakes" page, read on 13 November 2026, prints "Retail: $120.00" and "Cost: $85.00", says "Price is per pair" and "The clamp is optional", and adds: "price listed is for most standard Quickie wheelchairs. Some wheelchair models require different styles." The page does not print a Sunrise part number, so we cannot say which catalog row it matches. Sportaid's scissor locks with clamp for Quickie were "Cost: $81.50" a pair, and the version with clamp and long arm "Cost: $100.00", with the note "these are no longer available for the Quickie GT".

The manuals set the safety terms. The Nitrum manual says: "Rear wheel locks are NOT designed to slow or stop a moving wheelchair." Both the Nitrum and Quickie 2 manuals say lock arms must embed in the tires at least 1/8 inch (about 3.2 mm) when locked, and the Quickie 2 manual adds: "Wheel locks are installed at Sunrise and should be adjusted by your qualified service person." It also says to adjust the locks "after making sure the tires have the correct air pressure". Lock styles from other makers, clamp tube sizes and extension handles are compared in our [wheel lock guide](https://www.mobilitatlas.com/blog/wheelchair-wheel-lock-guide.html).

## Casters and forks

Sunrise's Nitrum caster folder holds ten assemblies: micro, 3-spoke, soft roll, aluminum and aluminum soft roll casters, a Spinergy carbon caster, a Frog Leg suspension fork, a single-sided fork and the multiple-position fork in its two serial versions. We counted every caster wheel row in the wheel tables, page by page, leaving out bearings, washers and tires sold on their own: 29 rows, from $65.00 for "4 Inch PLASTIC/POLY W/BRG CSTR" (101098S) to $263.00 for the Spinergy "CASTOR CX6 4 X 1.25 FORGED CAR" (170262). The catalog does not print a unit for most caster rows; one row, the 3 inch micro caster with bearing (920025S, $153.00), carries the remark "PAIR".

The fork rows show why the serial number matters. On the catalog page headed "MULTIPLE POSITION FORK prior to QNI-020000 & QNH-015000" Sunrise lists complete fork assemblies (164545 to 164548) at $199.00 and integral-bearing forks with fit notes, such as 112240S, "Black-Fits 5x1 Alu Poly, 5x1.5 Semi Pnue, 5 Sft Roll,5x1.5 Alu Sft Roll,6 Pneu, 6x1.5 Semi Pneu, 6x1.5 Alu Sft Roll", at $97.00. Under the "after" heading the forks are kits by size, such as "MULTI POS FORK KIT 115x45 ANO" (170368S, $140.00), with axle kits of their own. In our reading those are different forks, and a fork from one table should not be assumed to fit a chair from the other.

Frog Leg suspension forks have their own tables. On the Nitrum, the soft, medium and firm fork assemblies (164133, 164134, 164135) are $424.00, $446.00, $453.00, and the replacement elastomers are listed with these remarks: 050156-001S "0-100 lbs", 050156-002S "101-190 lbs" and 050156-003S "191-265 lbs". The table also lists a "FROG LEG FORK ASSEMBLY TOOL" (116351S, $75.00) with the remark "Required for assembly, see instruction sheet for details." The Quickie 2 table lists 6 inch Frog Leg forks with a 2.5 inch or 4 inch stem (921498 at $364.00 with hardware, 921499S at $378.00).

The Quickie 2 caster stem page is split "After S/N Prefix Q2X" and sells forks by length and stem height, such as 109338, "STD Stem - 6INCH Fork - Works w/ 4INCH, 5INCH, 6INCH, and 8INCH Casters", at $198.00, and plain forks such as 105839-002S, "FORK CASTER 6Inch", at $51.00. Three of its 8 inch fork rows (109344, 109346, 550730S) carry a limit such as "Works w/ 8 INCH X 2 INCH Casters only". 5 of the 6 Nitrum caster wheel tables, and the Quickie 2 3-spoke and 8 x 2 inch caster tables we copied, list the wheel bearing as "7/8 x 5/16 BEARING" (349502S, $13.00).

Two manual lines bear on caster choice. The Nitrum manual says: "Based on ANSI/RESNA testing, Sunrise Medical recommends the use of a caster wheel with a minimum diameter of 5-in, if the wheelchair will be overcoming obstacles up to 1/2-in on a regular basis." The Quickie 2 manual, in its dealer section, says: "Use a torque setting of 75 in-lbs. when adjusting the casters" and "For optimum performance, the caster housing should always be at a 90º angle to the floor". In our view, a change of caster size also changes seat height and handling, so agree it with the rider's therapist first. Caster types, bearing sizes and flutter across brands are in our [caster replacement guide](https://www.mobilitatlas.com/blog/wheelchair-caster-replacement-guide.html).

## Quick-release axles, axle sleeves and axle plates

The rear axle is the part the manuals are strictest about. The Nitrum manual says: "Do not use this chair UNLESS you are sure that both quick-release rear axles are locked" and "An axle is not locked until the quick-release button pops out fully." It adds: "Quick-Release Axles should be periodically cleaned and inspected for function and signs of wear or bending. Replace as necessary." The Quickie 2 manual says: "When checking axles and axle sleeves every six months, make sure they are clean and tight. Loose sleeves will damage the axle plate and will affect performance." It tells riders to check that the axle is locked "by pulling on the wheel in the direction of the axle".

Sunrise's catalog page for each chair sells quick-release axles by button and nut style, not by chair alone. The Nitrum's "QUICK RELEASE AXLES MATRIX-NITRUM" lists 4 axles from $83.00 ("QR AXLE EX SHORT BIG BTN", 111843S) to $154.00 ("QR AXLE W/ QUAD NUT PUSH BUTTON", 922170S). The Quickie 2's matrix lists 7 axles from $88.00 to $154.00, including "QR AXLE BIG BUTTON W/ SPACER" (922356, remark "Includes spacer"). Three numbers appear in both tables: 107268S, 109385S, 922170S. None of the axle rows prints a measured length or a unit (descriptions say only SHORT, EX SHORT or LONG), so in our view measure the old axle and ask the dealer to confirm the number against the serial before ordering. At $88.00 a row, two 109385S axles come to $176.00 by our arithmetic.

The two chairs' axle plates are listed differently. The Nitrum's "ADJUSTABLE AXLE PLATE - NITRUM" table lists 22 axle plate kits sold as a pair, with a center-of-gravity (COG) clamp or a standard clamp, at $453.00 to $595.00, and 18 single left or right plates by size at $210.00 to $258.00. Its camber tubes are sold by width, from "CAMBER TUBE 12 IN W" to "CAMBER TUBE 20 IN W", at $105.00 to $111.00, and camber plugs at 0, 3 and 6 degrees at $53.00, $58.00 and $67.00. The Nitrum's rear suspension table lists 144 complete suspension assemblies, split by width, weight band ("0-175LBS" or "176-265LBS") and axle plate, at $1,351.00 to $1,605.00.

The Quickie 2's table "STANDARD AXLE PLATE After S/N Prefix Q2X" lists a steel indexed axle plate (161575S, remark "Aluminum Plate, SS Sleeve - Used for Xtender only") and an aluminum indexed axle plate (161574S), both at $322.00, a stainless axle sleeve (481065S, $35.00) and a hardware kit (111237S, $125.00) whose remark reads "Q2 & Q2HP (Hardware for Both Sides & All Configs)". Its amputee axle plate (502002S, "NON-INDEXED") is $116.00, or $286.00 as a kit marked "PAIR". In our reading of these rows, the Q2 and Q2HP share that hardware kit; the table does not say the plates themselves fit the 2HP.

Sportaid sells a "Quickie Axle Sleeve" (stock 9074) at "Cost: $20.50", described as "1/2″ Inner Diameter. 5/8″ Outer Diameter. 2 3/16″ Overall Length. 16 TPI." and "Sold as eaches", with a "Quickie Axle Sleeve Nut (3/4 x 16)" at "Cost: $5.99" and an "Axle Sleeve Washer for Quickie" at "Cost: $3.95". A sleeve with two nuts would be $32.48 there, by our arithmetic. None of the three pages names the Quickie models it fits or a Sunrise part number. The manuals tie axle work to balance: the Nitrum manual says "The farther you move the rear axles FORWARD, the more likely it is that your chair will tip over backward", the Quickie 2 manual says "Do not change the set-up UNLESS you consult your healthcare advisor first", and both manuals say to adjust the rear wheel locks after any change to the rear axles. In our view, replace axle parts like for like and leave position changes to the rider's therapist and the dealer.

## Wheels, tires and tubes

The Nitrum and Quickie 2 folders each have separate part groups for wheels, tires and hand rims, and Sunrise's catalog has a top-level WHEELS folder as well. We did not copy those tables for this guide, so we give no Sunrise rear wheel or rear tire numbers here. Hand rims are compared in our [push rims guide](https://www.mobilitatlas.com/blog/wheelchair-push-rims-guide.html), tire sizes and replacement in our [tire replacement guide](https://www.mobilitatlas.com/blog/wheelchair-tire-replacement-guide.html), and tire and caster care in our [tire and caster care guide](https://www.mobilitatlas.com/blog/tire-caster-care.html).

For casters, the Quickie 2 catalog page "CASTER TIRES and TUBES" lists tires and tubes on their own: an "8 In PNEUMATIC TIRE" (383250S, $28.00), the 8 inch tire and tube together (383255S, $51.00), a "6 In PNEUMATIC TIRE" (383240S, $37.00), an "8 In TUBE" (382250S, $16.00), a "6 In TUBE" (382245S, $17.00), an "8in x 2in TYRE FOAM INSERT" (384701, $75.00) and an 8 x 2 inch tire and inner tube (384700S, $45.00; 384730S, $27.00).

SpinLife's Sunrise/Quickie Parts category showed two items when we read it on 13 November 2026, one of them a 24 x 1-3/8 inch knobby tire listed as "(EACH)" by Sunrise / Quickie, model number 385354S. Its product record stores a list price of $51 and a sale price of $30, "5-7 business days" in its ships-in text and "1 Year Warranty" as the warranty type; the page does not say which Quickie chairs it fits.

The manuals add the checks. The Quickie 2 manual says: "Do not use this chair if any of the tires are under- or over-inflated" and "Check weekly for proper inflation level, as listed on the tire side-wall." It also warns that "Low pressure in a rear tire may cause the wheel lock on that side to slip". Both manuals list "Tires and tubes" first among the things the warranty does not cover.

## Footrests, hangers and footplates

The Quickie 2 folder has 5 footrest folders: swing in-out hangers, footplates, front mount elevating legrests, extension mount elevating and articulating legrests, and Z-Finity. The Nitrum folder lists 14 footrest assemblies, from aluminum tubular and platform footrests to carbon and composite flip-back footrests.

On the Quickie 2 swing in-out catalog page we counted 16 hanger rows, sold by angle, mount and side, from $128.00 to $270.00. The extension mount hangers are 60, 70 and 80 degrees: "60 D SWING I/O HNGR PNTD" is $270.00 a side (122699S left, 122700S right), while the 70 and 80 degree versions are $128.00 a side. The front mount hangers are 70, 80 and 90 degrees at $128.00, $135.00 and $152.00 a side, and the hemi hangers at 60 and 70 degrees are $155.00. A pair of 70 degree extension mount hangers comes to $256.00 in the catalog's price column, by our arithmetic. The latch, the latch receiver ("for 1 side", $81.00) and the footrest clamp ($53.00) also appear as their own rows. The hanger rows' position range (1-7A,8-11 on the extension-mount page) spans the latch and clamp positions but not the receiver (12-15). The catalog does not say what ships with a hanger, so ask the dealer.

The Quickie 2 manual explains how these hangers go on: "Place swing-in/swing-out pivot saddle into the receiver (A) on front frame tube with the footrest facing inward or outward from the frame." To remove one, it says to "release latch (B) by pulling lever upward or pushing lever downward". It also says: "Make sure that your Sunrise dealer has correctly adjusted your footrests and/or legrests with the advice of a healthcare professional" and "Legrests and footrests should be swung out of the way, or removed for transfers." The hanger angle changes where a rider's legs sit, so in our view a change of angle is a seating decision for the therapist, not a parts swap.

On the Nitrum, the composite platform footplate page lists 18 footplates by width and length, from $300.00 to $819.00, each with the remark "order Adaptive Spacer Set separately"; the spacer sets are $58.00 to $61.00. The leg straps (113255S to 113258S) are $51.00 and are sold by width, with remarks such as "40 - 46 cm seat width / 16 - 18 Footrest Width". Snap-on footrest covers run from $104.00 (9 inch) to $134.00, and a "WEAR PAD W/ ADHESIVE" (103107, $88.00) comes with the remark "Includes cable ties". Footrest and legrest types across brands are compared in our [footrest guide](https://www.mobilitatlas.com/blog/wheelchair-footrest-guide.html).

## Seat and back upholstery

Quickie upholstery is sized to the chair, and Sunrise's catalog shows how many sizes there are. The Nitrum's "STANDARD SEAT SLING" table has 295 rows and its "STANDARD BACK UPHOLSTERY EXO" table 225 rows; we copied the first 30 of each. In those rows the seat slings were $69.00 to $77.00 and the back upholstery $85.00 to $171.00. Seat rail kits are separate rows, sold as a "Pair, for 12INCH seat depth" and so on, at $52.00 to $61.00.

Read the remark as well as the description. The first sling row, 109466S, is described as "SEAT SLING 12 IN W X 11 IN D" and carries the remark "for 12x12"; in each of the 21 sling rows we copied, the remark names a depth one inch more than the description. In the back table, 131546S is described as "BACK UPH STD 14W 10-14 HT" while its remark begins "(13Inch WIDE)", and two rows described as "BACK UPH STD 16W 12-16 HT" carry different numbers and prices (131559S at $97.00 and 131561S at $102.00). The catalog does not explain these differences, so in our view give the dealer the serial number and the chair's measured seat width, depth and back height, and let them pick the row.

Tension-adjustable backs cost more. In the Nitrum's "TENSION ADJUSTABLE BALLISTIC NYLON UPHOLSTERY" table (74 rows; we copied 20), the assemblies in the 20 rows we copied ran from $548.00 to $701.00. The Nitrum manual gives these backs their own warranty term: free "from defects in materials and workmanship for a period of twelve months from the date of purchase", the manual says, a term that "does not apply to puncture, tears or burns". The Quickie 2 manual says: "Replace worn or torn fabric of seat and seat back as soon as you can" and warns that "laundering or excess moisture will reduce the flame retardation qualities of the fabric".

Sportaid's Quickie seat upholstery, read on 12 November 2026, was "Cost: $70.50", with "Tension Adjustable (+$55.00)"; its back upholstery was "$105.00 – $278.00". The back page says that if an order without a serial number is wrong, "you will be responsible for return shipping and the 25% restock fee imposed by Quickie." Upholstery from other makers, universal slings and care are compared in our [seat upholstery guide](https://www.mobilitatlas.com/blog/wheelchair-seat-upholstery-guide.html).

## Side guards, push handles, bearings and small hardware

Side guards are sold by clamp style; armrests and side guards across brands are in our [armrest guide](https://www.mobilitatlas.com/blog/wheelchair-armrest-guide.html). Sportaid's "New Quickie Plastic Side Guards" (stock 9804QCA-M), read on 13 November 2026, are "Retail: $162.00" and "Cost: $125.00", with "Pricing is for 1 pair of sideguards", and the page says: "These side guards DO NOT fit into the old-style clamps." Its bracket options are listed by model: "5R/QRI/GTI/GT With Mounting Bracket (+$105)", "7R/7RS/Q7 With Mounting Bracket (+$69.5)", "Q2/2HP/LITE With Mounting Bracket (+$69.5)" and "QX/QXI With Mounting Bracket (+$30)". With a Q7 bracket the pair would come to $194.50, by our arithmetic. The older-style "Quickie Wheelchair Side Guards" page lists "$180.00 – $210.00" for a pair and says: "These DO NOT fit into new style clamps." The serial number is how Sportaid says it checks: "Serial number is used to verify compatibility and ensure correct parts are ordered for you."

Bearings are where generic listings and Quickie listings meet. Sportaid's "1/2″ Sealed Wheelchair Fork Stem and Rear Wheel Bearings" (stock 6205, "Cost: $6.50" for one bearing) say they fit "most chairs – Top End, Quickie, Invacare, Ti-Sports, and Colours" but "Does Not Fit Golz Twin Star Wheels, Fork Stem for Quickie Q7 or GT, or Fork Stem Motion Composite". Sunrise's own Nitrum fork table lists a "BRNG 28MM OD 12MM ID 8MM THK" (349104S, $28.00) for the earlier multiple-position fork and a "BEARING KIT MULTI POS FORK" (159434, $35.00) with the remark "Includes 2 bearings for one side only". Bearing sizes in inches and millimeters are not interchangeable by name, so in our view measure the old bearing or quote the Sunrise number.

WheelchairBearings.com's search for quickie returned 12 products on 13 November 2026, and none of their titles contains the word Quickie. When we read each product's description, 9 named Quickie somewhere, for example the 608 caster bearings, "Used on the following wheelchair products with 8mm axles: Quickie / Sunrise Medical manual wheelchair casters", and the 6002 fork bearings, "after-market bearings used on Quickie and Permobil". These are the seller's fit statements for its own products, not Sunrise's.

Small parts round out the list. Sportaid's "Quickie Wheelchair Tool Kit" (stock 9012, "Cost: $65.00") includes, its page says, "an adjustable wrench, spoke wrench, close wrench, phillip/flat head reversible screwdriver, socket wrench, and assorted allen wrenches". Its "Quickie/Jay Odds and Ends" page sells leftover new parts by Sunrise number: "From time to time we get odd parts that were either shipped incorrectly or ordered incorrectly". Push handles have their own assemblies in the Nitrum back folder, which we did not copy.

## Quickie power chairs, briefly

Quickie power chair parts sit in the same catalog. The QUICKIE POWER WHEELCHAIR folder lists 14 entries: 13 chair folders from the Q700-UP M to the Q50 R Carbon, plus SWITCH-IT. The Q500 M PRO folder alone has part groups from chassis and shrouds to joysticks, batteries and wiring. We copied its wheel and battery tables:

- Casters, as the catalog page lists them: "7 inch castor wheel" (256209, remark "Q500 M / Q400 M, right/left useable", $52.00) and "Castor fork" (256211, $57.00).
- Drive wheels: a 14 inch V-type pneumatic drive wheel, left (244821, $347.00) and right (245540, $306.00); the tire marked "3.00-8" (031053, $116.00) and a 14 inch inner tube (384739, $20.00).
- Batteries, as the same page lists them: "GP34 MK BATTERY W/ BOX EA" (169988, "MK, GEL", $667.00), a Group 34 AGM battery (244628, $634.00) and a Group 22 battery (244624, $425.00).
- Chargers: 8 amp (20016120-004, $645.00) and 10 amp (20016121-004, $795.00), both listed with a US plug.

We did not read a Q500 M owner's manual for this guide, so we give no battery or electronics steps here. In our view, batteries, chargers, controllers and joysticks on a power chair are dealer work, and in one openFDA recall record, Z-1947-2020, the record says the firm's dealer was instructed to replace the controller unit of one Q700M. The power chair warranties are summarized in our [Quickie guide](https://www.mobilitatlas.com/blog/quickie-guide.html), batteries in our [power wheelchair batteries guide](https://www.mobilitatlas.com/blog/power-wheelchair-batteries-guide.html) and joysticks in our [joystick guide](https://www.mobilitatlas.com/blog/wheelchair-joystick-guide.html).

## Older and European Quickie models

Several older or non-US Quickie chairs get little or no space in Sunrise's US catalog, and the pages we read say different things about each. We list what we found and nothing more.

- Quickie GP and GPV: the US catalog's GP SERIES folder is not marked discontinued and splits its hangers and legrests at "S/N GP-96451". Sportaid's GP/GPV page says camber "comes from factory set at 11° and can set between 0° to 11°".
- Quickie GT and GTi: Sportaid's side guard options list "5R/QRI/GTI/GT", its long-arm scissor lock page says "these are no longer available for the Quickie GT", and its 1/2 inch bearing page says it does not fit the "Fork Stem for Quickie Q7 or GT".
- Quickie Q7: Sportaid's side guard options list "7R/7RS/Q7". FDA recall records name the Q7 (model EIR4) three times; see the recall section below. We did not find a QM-7 on the pages we read.
- Quickie Xenon 2: the US catalog page shows a folder titled "QUICKIE XENON 2 Discontinued", with part groups from frame to accessories and a folder titled "DISCONTINUED LETTER", which we did not open.
- Quickie 2HP: the Quickie 2 axle plate hardware kit row reads "Q2 & Q2HP", and Sportaid's side guard options list "Q2/2HP/LITE". The 2HP owner's manual on Sunrise's site has a text layer we could not read.
- Krypton, Argon2 and Life: Sunrise UK's lightweight wheelchairs page lists the "QUICKIE LIFE R" from £1765 and the "QUICKIE Argon²" from £2250, and names the Krypton in its text. 

For UK and European chairs, Sunrise UK's FAQ says parts come through its "network of authorised dealerships", as quoted earlier. We did not read a UK owner's manual or UK warranty for this guide, so we say nothing about UK warranty terms; ask the UK dealer for the manual that came with the chair.

## What Quickie parts cost

What do Quickie wheelchair parts cost? It depends on the part and the seller, and the prices we found are of two kinds. Mobility Atlas read Sunrise's US parts catalog and three US sellers on 13 November 2026, with Sportaid's upholstery pages read on 12 November. Sunrise's catalog has an unlabeled price column, which Sunrise does not say is a retail price, and its FAQ says it does not sell parts directly, so a rider pays a dealer's price. In that column, complete one-side Nitrum lock rows were $55.00 to $143.00, caster wheels $65.00 to $263.00 and Quickie 2 swing-away hangers $128.00 to $270.00 a side. At Sportaid, the 11 part tiles in its quickie search that name Quickie, leaving out an odds-and-ends page, ran from $3.95 to $278.00, and SpinLife listed a Sunrise soft roll caster at $87. Prices differ by country, dealer, tax, shipping and funding.

The lock range counts the 50 complete one-side lock rows across the eight Nitrum lock tables, leaving out clamps, hardware, levers, the $35.00 STANDARD BRAKE component rows and the Eagle pairs. The caster range counts the 29 caster wheel rows described in the casters section.

| Seller, date read | Item as named | Price as printed | Unit |
| --- | --- | --- | --- |
| Sportaid, 13 Nov 2026 | Quickie Push to Lock Wheelchair Brakes | Retail $120.00; Cost $85.00 | Pair |
| Sportaid, 13 Nov 2026 | Scissor Wheelchair Brakes with Clamp for Quickie | Retail $101.00; Cost $81.50 | Pair |
| Sportaid, 13 Nov 2026 | New Quickie Plastic Side Guards | Retail $162.00; Cost $125.00 | Pair |
| Sportaid, 13 Nov 2026 | Quickie Axle Sleeve | Cost $20.50 | Each |
| Sportaid, 13 Nov 2026 | Quickie Wheelchair Tool Kit | Cost $65.00 | Kit |
| Sportaid, 12 Nov 2026 | Quickie Seat Upholstery | Cost $70.50 | Not stated |
| SpinLife, 13 Nov 2026 | Caster 5in Soft Roll w/Bearings, 400103 | $87 (list and sale) | Not stated |
| SpinLife, 13 Nov 2026 | 24 x 1-3/8 knobby tire, 385354S | Tile: Starting at $51 / $30 (record: list 51, sale 30) | Each |
| WheelchairBearings, 13 Nov 2026 | 608 caster bearings | $19.99 | 4-pack |

How we counted the Sportaid range: its search for quickie showed 35 results on three pages, and we read all of them. We set aside 15 wheelchairs, 3 bags and pouches and 2 JAY backs, leaving 15 part tiles; we then left out the odds-and-ends tile, whose page says "the base price will display at .01¢". Of the rest, 11 name Quickie and 3 are generic caster hardware or bearing tiles that do not; with those 3 included the range runs from $1.80 to $278.00. Where a tile printed a range, both ends count. Sportaid's pages print two labels, "Retail" and "Cost"; on the pages that show both, Cost is the lower figure. Sportaid's pages say international shipping costs are emailed after an order is submitted and that it will "NOT charge your credit card" until the buyer approves them.

Four costs sit outside the part price. Sunrise's freight policy lists a $34.95 handling fee for all parts orders; a dealer may pass on that or add its own. Labor is the rider's under both Quickie warranties we read, as the warranty section explains. Sportaid's upholstery pages offered shipping at $15 or $30. And SpinLife's soft roll caster page lists "a 20% Restocking Fee" for returns. Our catalog's guide prices are not used in this guide.

## Similar numbers, two prices

Where a seller prints a number close to a Sunrise number, you can set the two side by side, with care. We found two such cases. In both the numbers differ by the S suffix, which neither page explains, and the Sunrise figure comes from the catalog's unlabeled price column, which Sunrise does not say is a retail price.

- 5 inch soft roll caster: Sunrise's Nitrum caster page lists "400103S" with $92.00 in its unlabeled price column; SpinLife lists model number 400103 at $87.
- Quick-release axles: Sunrise's catalog page lists 109385S, "QR AXLE NUT LONG BG BTTN", with $88.00 a row in the same unlabeled column; Sportaid's odds-and-ends page offers "9075A Part# 109385 QR Axles (1 pr) (+$65)" on top of a $0.01 base, which is $65.01 for a pair by our arithmetic.

A third comparison needs a bigger caveat. Sportaid's Quickie push-to-lock pair is $85.00 Cost, but Sportaid prints no Sunrise number and says its price is "for most standard Quickie wheelchairs", so we cannot say it is the same lock as any catalog row. In our view, a lower price is worth having only once the seller has matched the part to your serial number in writing.

## Warranty on Quickie parts: what the two manuals print

Sunrise's support FAQ says warranty information is in the owner's manual, and the full warranty terms of the Quickie manuals are set out in our [Quickie guide](https://www.mobilitatlas.com/blog/quickie-guide.html). Each term belongs only to the manual that prints it: the Quickie Nitrum Instructions for Use (P/N 249817 Rev. E, read 9 November 2026) and the Quickie 2/2HD Owner's Manual (MK-100070 Rev. G, read 13 November 2026).

For parts, both manuals say that Sunrise warrants "all Sunrise-made parts and components of this wheelchair against defects in materials and workmanship for one year from the date of first consumer purchase", with tires, tubes, upholstery, pads and grips excluded and labor left to the owner; the exact wording is in our [Quickie guide](https://www.mobilitatlas.com/blog/quickie-guide.html).

In our reading, a generic bearing or side guard can still be the right buy for a chair out of warranty, but while the one-year parts warranty runs, ask the dealer in writing whether a non-Sunrise part affects it. The Nitrum manual says its warranty "applies in the USA only"; the Quickie 2 manual says "in the USA and Canada only".

## Returns and restocking

Quickie parts are not easy to send back, and each party prints its own rule. Sunrise's Freight and Return Policy, effective June 29, 2026, says returns need "advance authorization from Sunrise Medical Customer Service in the form of a Return Authorization (RA) number", that "No returns will be accepted by Sunrise Medical if the request to return the products or parts is made beyond 180 days of the original ship date", and that returned product "must be saleable (not a discontinued item and not used)". Non-warranty returns carry a restocking fee of 25% when the RA is issued within 90 days of the original ship date (50% within 180 days), with the part returned within 60 days of the RA; returns for warranty items are "subject to Sunrise Medical's evaluation but not subject to a restocking fee". An end user's return must go through the dealer, as the policy says.

Sellers add their own terms. Sportaid's Quickie back upholstery page warns of "the 25% restock fee imposed by Quickie" if an order placed without a serial number is wrong. SpinLife's page for the Sunrise soft roll caster says "This item has a 20% Restocking Fee", that the buyer pays return shipping, and that "An RA (Return Authorization) from SpinLife must be requested within 30 days of delivery." The same SpinLife record lists the caster's warranty type as "No Warranty", while its knobby tire record lists "1 Year Warranty".

In our view, the cheapest return is the one you never make: send the serial number, the old part's photo and the Sunrise number with the order, and ask the seller to confirm the match in writing before you pay.

## Who should fit a Quickie part

The Quickie 2 manual divides the work. It says the chair "may require periodic safety and function checks or certain tool free adjustments that can be performed by the owner, caregiver or authorized dealer if desired", and its safety checklist says "The user or caregiver should perform these weekly and monthly checks", from tire inflation and wheel locks to casters and upholstery, with an annual service by the dealer. For repairs it says: "To protect your investment, have all major maintenance and repair work done by your authorized dealer", and in its dealer section, "If you have discovered a worn, bent, or damaged part, repair or replace them with recommended parts before returning this chair to service."

Some parts are named for a professional. The Quickie 2 manual says wheel locks "should be adjusted by your qualified service person", and that footrests should be adjusted by "your Sunrise dealer" with "the advice of a healthcare professional". Its dealer section prints two rules where no torque is specified: one says "When not specified, torque settings should be 60 in-lbs", the other "M5 fasteners = 44 in-lbs (5 Nm), M6 fasteners = 62 in-lbs (7 Nm), M8 fasteners = 88 in-lbs (10 Nm). For all others torque setting should be 60 in-lbs (6.8 Nm)." In our view, ask the dealer which applies to your fastener. The manual lists a torque wrench among the tools needed. The Nitrum's Frog Leg fork table lists an assembly tool as "Required for assembly".

The Quickie 2 manual's dealer section also says: "The owner of this chair is responsible for making sure that it has been setup and adjusted by a trained service professional under the advice of a healthcare advisor. Service and/or adjustments should only be done with the advice of a healthcare professional."

In our view, keep owner work to what the manual names, and leave part replacement to the dealer. General repair steps are in our [manual wheelchair repair guide](https://www.mobilitatlas.com/blog/manual-wheelchair-repair-guide.html).

## Medicare and other funders

Medicare's rules for repairs depend on ownership. Medicare's booklet on durable medical equipment, read on 9 November 2026, says: "If you own your equipment, the supplier who sold it to you isn't required to repair it", and "If you rent equipment, your supplier must maintain and repair the equipment and keep it in good working order at all times." The same booklet says: "If you own Medicare-covered DME and other devices, Medicare may also cover repairs and replacement parts," with Medicare paying 80% of the Medicare-approved amount for repairs and "Your costs may be higher if the supplier doesn't accept assignment." Medicare.gov's wheelchairs page says that after you meet the Part B deductible, you pay 20% of the Medicare-approved amount, if your supplier accepts assignment. These are US rules for Original Medicare; we did not read Medicare Advantage, Medicaid or VA rules for this guide, so ask the plan before a repair. The funding steps for wheelchair parts are in our [wheelchair parts guide](https://www.mobilitatlas.com/blog/wheelchair-parts-guide.html).

## FDA recall records that name Quickie

Our [Quickie guide](https://www.mobilitatlas.com/blog/quickie-guide.html) covers the FDA recall records that name Quickie. A word search of openFDA's recall records for "quickie", run on 13 November 2026 (data last updated 12 November 2026), returned 11 records, initiated between 15 November 2005 and 13 February 2020, all with the status Terminated; three bear on parts for older manual chairs. Z-2290-2016 covers the Quickie Q7 (model EIR4) because of "an observed failure of the backrest bracket", the record says. Z-2113-2012 covers a "Padded Swing Away Arm Rest with Receiver" used on the "Quickie Q7 (EIR4), GT (EIR3), GTi (EIT4) and Zippie Zone (EIRZ1)"; its reason reads "Reports of injury when the Padded Swing Away Armrest is used for full body weight. Owner's manual states that armrest is only designed for resting of forearm." Z-1020-2015 covers a Q7 height adjustable handle. In our view, if you are buying parts for a secondhand Q7 or GT, ask the dealer to check the serial number against Sunrise's records for these recalls and notices; used-chair checks are in our [used wheelchair guide](https://www.mobilitatlas.com/blog/used-wheelchair-guide.html).

## Ordering Quickie parts through Mobility Atlas

Mobility Atlas can find and quote Quickie parts, including parts that are not listed on our [wheelchair parts and accessories page](https://www.mobilitatlas.com/c/wheelchair-parts-accessories.html). Send an enquiry or part request with the chair's model, its serial number, the Sunrise part number if you have it, the side and a photo of the old part. We reply with a written quote that includes delivery to your country, and nothing is charged before you accept it.

What we cannot do is change the rules above. Sunrise's warranty claims still go through the route its manuals print, Medicare still pays by its own rules, and a part that changes the chair's setup still needs the dealer and the rider's therapist. If you are outside the US, the Nitrum manual says "Check with your supplier to find out if international warranties apply", so ask before you order.

## Three traps

Trap one: ordering by the chair's name alone. Sunrise's catalog splits Nitrum forks at "QNI-020000 & QNH-015000", GP hangers at "S/N GP-96451" and Quickie 2 assemblies "After S/N Prefix Q2X". Two chairs with the same name can need different parts. Read the serial label first; the Nitrum manual says it is "on the right side of frame cross brace next to the hand grip".

Trap two: trusting a search result's name. On WheelchairBearings.com, none of the 12 products returned for quickie had Quickie in the title; the fit lay in the descriptions, which are the seller's statements. Sportaid's 1/2 inch bearing fits "most chairs" by its own description, yet the same page excludes the "Fork Stem for Quickie Q7 or GT". Match a Sunrise number, a measured size or a seller's written fit for your model.

Trap three: forgetting the extras. A Nitrum lock row may need a clamp ($75.00 for the oval clamp) and a handle kit; a Nitrum push lock's table also lists mounting bars and a fastener kit as separate positions; a Quickie 2 hanger may need a latch receiver, which the catalog lists as its own row; a side guard may need a bracket for your model, which Sportaid prices as an option. Sunrise's policy adds a handling fee per parts order, and both Quickie warranties leave labor to the owner. Ask for the total, fitted, in writing.

## Three composite scenarios

These are composite scenarios, not individual customers. Each uses only the documents named for that model.

Scenario one: a Nitrum rider's front forks wobble and one bearing is rough. The Nitrum manual's safety checklist says: "Immediately repair any problem." The serial number on the label falls after QNI-020000, so the rider's dealer looks in the catalog table "MULTIPLE POSITION FORK after QNI-020000 & QNH-015000", where the forks are kits such as "MP FORK 115x45 KIT" (169840S, $140.00). The rider asks the dealer for a written total including fitting, because the Nitrum manual leaves labor to the owner. The caster wheels stay the same size, so the setup does not change.

Scenario two: a Quickie 2 rider's right 70 degree swing-away hanger cracks. The Quickie 2 manual says: "If discovered, repair or replace loose, worn, bent or damaged parts before using the chair." The Quickie 2 extension-mount table lists "70 D SWING I/O HNGR PNTD" with 119459S for the right side at $128.00 (the front-mount 70 degree right hanger is 119457S, also $128.00, so the dealer checks which the chair has). The chair is eight months old, so the rider asks the dealer whether the one-year parts warranty in the Quickie 2 manual covers it, and learns that labor is theirs either way. The rider keeps the old hanger until the claim is decided.

Scenario three: a family buys a secondhand Quickie GP and needs elevating legrests. The GP SERIES folder splits "ELRS prior to S/N GP-96451" and "ELRS after S/N GP-96451", so they read the serial label before asking for a quote. Because legrest position changes how the rider sits, they book a session with the rider's physical therapist before anything is ordered, and they ask the dealer whether the chair was ever part of a recall.

## Questions to ask before you order a Quickie part

- What is the full serial number, including the letters before the dash, and which catalog heading does it fall under?
- What is the Sunrise part number, and is it for the left side, the right side or a pair?
- Does the part need a clamp, bracket, latch, spacer or hardware kit that is sold separately?
- Is the chair still inside the one-year parts warranty, and who files the claim?
- What is the total in writing: part, handling, shipping and fitting labor?
- Can the part be returned, and what restocking fee applies if it is wrong?
- Does the change alter the chair's setup, and if so, has the rider's therapist agreed it?

Ask the dealer or seller these questions in writing, and keep the answers with the chair's manual.

## Sources and documents

Maker documents: Sunrise Medical's US spare parts catalog (top level, the Quickie folders and the Nitrum, Quickie 2, GP and Q500 M PRO tables named above), its Dealer and Clinician Resources, Support, After-Sales FAQ and Serial Number Lookup pages, its Freight and Return Policy, the Quickie 2 product page and Quickie 2/2HD owner's manual, all read on 13 November 2026; the Quickie Nitrum Instructions for Use, read on 9 November 2026; and Sunrise Medical UK's Maintenance and Support FAQ and lightweight wheelchairs page, read on 13 November 2026.

Sellers: Sportaid's quickie search (three pages) and Quickie parts pages, read on 13 November 2026, and its Quickie seat and back upholstery pages, read on 12 November 2026; SpinLife's Sunrise/Quickie Parts category and two product records; WheelchairBearings.com's quickie search and the twelve product records behind it, all read on 13 November 2026. Public records: openFDA device recalls, read on 13 November 2026; Medicare's booklet on durable medical equipment and Medicare.gov's wheelchairs page, read on 9 November 2026. Our catalog rows AC-030, AC-198, AC-261, AC-269, AC-271, AC-298, AC-302 and AC-307 were used for non-price facts only.

Method: every quote was checked by script against the saved page text, and every computed figure (ranges, counts, pair totals) was produced by a script from the same files. Neighboring guides: [Quickie](https://www.mobilitatlas.com/blog/quickie-guide.html), [Sunrise Medical](https://www.mobilitatlas.com/blog/sunrise-medical-guide.html), [ultralight wheelchairs](https://www.mobilitatlas.com/blog/ultralight-wheelchair-guide.html) and [wheelchair parts](https://www.mobilitatlas.com/blog/wheelchair-parts-guide.html).

## Common questions

### Can I buy Quickie parts directly from Sunrise Medical?

Not in the US, by Sunrise's own account. Its after-sales FAQ says spare parts are available through its network of authorized dealerships and that it "cannot sell spare parts directly". Its UK FAQ says the same for the UK. Sunrise's online spare parts catalog can still help you name the part and its number before you ask a dealer or seller for a price.

### Where is the serial number on a Quickie wheelchair?

The Nitrum manual says the label is "on the right side of frame cross brace next to the hand grip". Sunrise UK's FAQ says that on folding manual chairs it is on the cross-brace under the seat, on rigid manual chairs on the rear side of the frame, and on power chairs on the chassis or drive base. Sunrise's lookup page says serial numbers begin with two or three letters and a dash.

### How do I find the right Quickie part number?

Open Sunrise's US spare parts catalog, choose your chair's folder (for example QUICKIE NITRUM or QUICKIE 2 EIQ2X), then the part group and the assembly, and read the row whose remark matches your side and setup. Some headings are split by serial number, such as Nitrum forks before and after QNI-020000. Copy the article number exactly and give it to the dealer with your serial number.

### Are Quickie parts covered by warranty?

The Nitrum and Quickie 2/2HD manuals warrant Sunrise-made parts against defects for one year from first consumer purchase and the frame for life while the original purchaser owns the chair. Both exclude tires and tubes, upholstery, pads and push-handle grips, need prior approval for claims and leave labor to the owner. Each term belongs to the manual that prints it.

### Do Quickie wheel locks from one model fit another?

In our reading, not by default. Sunrise's catalog lists the same SZ-series lock numbers under the Nitrum and Quickie 2, but the clamps differ: an oval clamp for the Nitrum and a different clamp assembly for the Quickie 2. Order by the part number printed under your own chair's heading, and have the lock adjusted so the arm embeds at least 1/8 inch in the tire, as both manuals say.

### Why do Quickie part prices differ between sellers and countries?

Sunrise's catalog shows one price column, dealers set their own prices, and sellers print their own labels, such as Sportaid's "Retail" and "Cost". Shipping, handling, tax, funding and country all change the total, and an unlabeled price column in Sunrise's catalog shows $92.00 for a 5 inch soft roll caster numbered 400103S, while SpinLife lists one numbered 400103 at $87. Mobility Atlas can quote a Quickie part with delivery to your country.

## Sources

- Sunrise Medical: Spare parts catalogue USA (top level and Quickie folders, read 13 November 2026): https://parts.sunrisemedical.com/index.php?m=spc&a=index&catalog=Sunrise_US&path=%2C0&country=us
- Sunrise Medical spare parts catalog: Quickie Nitrum folder (14 part groups): https://parts.sunrisemedical.com/index.php?catalog=Sunrise_US&path=%2C0%2C30901%2C30902&m=spc&a=index
- Sunrise Medical spare parts catalog: Quickie Nitrum wheel locks: https://parts.sunrisemedical.com/index.php?catalog=Sunrise_US&path=%2C0%2C30901%2C30902%2C31220&m=spc&a=index
- Sunrise Medical spare parts catalog: Quickie Nitrum casters and forks: https://parts.sunrisemedical.com/index.php?catalog=Sunrise_US&path=%2C0%2C30901%2C30902%2C31313&m=spc&a=index
- Sunrise Medical spare parts catalog: Quickie Nitrum axle plates and axles: https://parts.sunrisemedical.com/index.php?catalog=Sunrise_US&path=%2C0%2C30901%2C30902%2C30948&m=spc&a=index
- Sunrise Medical spare parts catalog: Quickie Nitrum standard seat sling (seat, back and footrest assemblies): https://parts.sunrisemedical.com/index.php?catalog=Sunrise_US&path=%2C0%2C30901%2C30902%2C31901%2C32072&m=spc&a=index
- Sunrise Medical spare parts catalog: Quickie 2 EIQ2X (wheel locks, axles, casters, hangers): https://parts.sunrisemedical.com/index.php?catalog=Sunrise_US&path=%2C0%2C16852%2C18748&m=spc&a=index
- Sunrise Medical spare parts catalog: GP Series folder: https://parts.sunrisemedical.com/index.php?catalog=Sunrise_US&path=%2C0%2C30901%2C37888&m=spc&a=index
- Sunrise Medical spare parts catalog: Q500 M Pro folder: https://parts.sunrisemedical.com/index.php?catalog=Sunrise_US&path=%2C0%2C1%2C10217&m=spc&a=index
- Sunrise Medical: Dealer and Clinician Resources: https://www.sunrisemedical.com/resources
- Sunrise Medical: Support: https://www.sunrisemedical.com/support
- Sunrise Medical: After-Sales Support FAQs: https://www.sunrisemedical.com/support/faqs/general/after-sales-support
- Sunrise Medical: Serial Number Inquiry: https://www.sunrisemedical.com/resources/serial-number-inquiry-external
- Sunrise Medical: Freight and Return Policy, effective June 29, 2026: https://www.sunrisemedical.com/policies/freight-return-policy
- Sunrise Medical: Quickie 2 product page (documents list): https://www.sunrisemedical.com/manual-wheelchairs/quickie/folding-wheelchairs/quickie-2
- Sunrise Medical: Quickie 2/2HD Owner's Manual, MK-100070 Rev. G (PDF): https://www.sunrisemedical.com/getattachment/5c5d99ab-a4d6-437d-83a5-1da7f4c8e4cb/.aspx
- Sunrise Medical: Quickie 2HP Owner's Manual, 128226 Rev. C (PDF; text layer not readable): https://www.sunrisemedical.com/getattachment/40fad997-865c-4910-b474-ad11455f1b3f/.aspx
- Sunrise Medical: Quickie Nitrum Instructions for Use, P/N 249817 Rev. E (PDF; read 9 November 2026): https://www.sunrisemedical.com/getattachment/3362e72c-a8af-47b8-ab99-320159fdd501/.aspx
- Sunrise Medical UK: Maintenance and Support FAQ: https://www.sunrisemedical.co.uk/support/faqs/help-and-support/after-sales
- Sunrise Medical UK: Lightweight Wheelchairs by QUICKIE (with serial number FAQ): https://www.sunrisemedical.co.uk/wheelchairs/quickie/lightweight-wheelchairs
- Sportaid: search results for quickie (pages 1 to 3): https://sportaid.com/search/quickie
- Sportaid: Quickie Push to Lock Wheelchair Brakes: https://sportaid.com/product/quickie-push-brakes-without-clamp-p2/
- Sportaid: Scissor Wheelchair Brakes with Clamp for Quickie: https://sportaid.com/product/scissor-brakes-with-clamp-for-quickie/
- Sportaid: Scissor Wheelchair Brakes with Clamp and Long Arm for Quickie: https://sportaid.com/product/scissor-brakes-with-clamp-for-invacare-top-end-p7/
- Sportaid: Quickie Axle Sleeve: https://sportaid.com/product/quickie-axle-sleeve-p3/
- Sportaid: Quickie Axle Sleeve Nut (3/4 x 16): https://sportaid.com/product/quickie-axle-sleeve-nut-3-4-x-16/
- Sportaid: Axle Sleeve Washer for Quickie: https://sportaid.com/product/axle-sleeve-washer-for-quickie-p4/
- Sportaid: Quickie Wheelchair Tool Kit: https://sportaid.com/product/quickie-tool-kit-p3/
- Sportaid: Quickie/Jay Odds and Ends: https://sportaid.com/product/quickie-jay-odds-and-ends/
- Sportaid: 1/2 inch Sealed Wheelchair Fork Stem and Rear Wheel Bearings: https://sportaid.com/product/1-2-sealed-wheelchair-fork-stem-and-rear-wheel-bearings/
- Sportaid: New Quickie Plastic Side Guards: https://sportaid.com/product/new-quickie-plastic-side-guards/
- Sportaid: Quickie Wheelchair Side Guards: https://sportaid.com/product/quickie-wheelchair-side-guards/
- Sportaid: Quickie GP/GPV Wheelchair: https://sportaid.com/product/quickie-gp-gpv-wheelchair/
- Sportaid: Quickie Seat Upholstery (read 12 November 2026): https://sportaid.com/product/quickie-seat-upholstery-p3/
- Sportaid: Quickie Wheelchair Back Upholstery (read 12 November 2026): https://sportaid.com/product/quickie-back-upholstery/
- SpinLife: Sunrise/Quickie Parts category: https://www.spinlife.com/parts/sunrise-quickie-parts/critpath/match.cfm?categoryID=397
- SpinLife: Sunrise / Quickie Caster 5 inch Soft Roll w/Bearings: https://www.spinlife.com/Sunrise---Quickie-Caster-5inch-Soft-Roll-w-Bearings-Sunrise-Quickie-Parts/spec.cfm?productID=79022
- SpinLife: Sunrise / Quickie 24 inch x 1-3/8 inch knobby tire (each): https://www.spinlife.com/Sunrise---Quickie-24inch-X-1-3-8inch-KNOBBY-TIRE-%28EACH%29-Sunrise-Quickie-Parts/spec.cfm?productID=73830
- WheelchairBearings.com: search results for quickie: https://wheelchairbearings.com/search?q=quickie&type=product
- openFDA: device recalls, word search for quickie in product description: https://api.fda.gov/device/recall.json?search=product_description:quickie&limit=100
- Medicare: Medicare Coverage of Durable Medical Equipment and Other Devices, booklet 11045 (read 9 November 2026): https://www.medicare.gov/publications/11045-medicare-coverage-of-dme-and-other-devices.pdf
- Medicare.gov: Wheelchairs and scooters coverage page (read 9 November 2026): https://www.medicare.gov/coverage/wheelchairs-scooters

Read on 13 November 2026. The wording of the article is our own.

## About the author

Mobility Atlas is run by Anna, who has used a wheelchair for 19 years, since she was ten. She started it because she always wanted one place where a person who needs a chair, a wheel, a cushion or a spare part can see everything that is made, side by side, and simply ask for it. She reads and answers every enquiry herself.

Contact: anna@mobilitatlas.com, WhatsApp +66 65 398 9085. Canonical facts about Mobility Atlas: https://www.mobilitatlas.com/about/facts.html
