Price on request
Genium (3B1-3)
Microprocessor knees. A microprocessor knee designed to follow a natural gait and handle stairs and obstacles.
Ottobock
Photo could not be loaded
Ottobock · Microprocessor knees · PR-030
Ottobock Kenevo 3C60 Microprocessor Knee
The Ottobock Kenevo 3C60 is a microprocessor knee tuned for people who walk less or are in rehabilitation. It supports sitting down and standing up, has a wheelchair mode, can be locked straight by hand and helps on ramp descents. The knee weighs 2 lb without the tube adapter, flexes to 124 degrees and is rated IP54 against dust and splashes. Overnight charging each day is recommended.
- Mobility grade
- 1 to 3
- Max body weight
- 150 kg (330 lb)
- Knee flexion
- 124 degrees
- Weight
- 2 lb without tube adapter
Ottobock Kenevo (3C60) key features
- Supported sit-to-stand and stand-to-sit
- Wheelchair mode
- Stumble Recovery Plus
- Manual lock in the extended position
- Indoor stationary bicycle function
- connectgo app, with charger usable through a foam cover
Who the Ottobock Kenevo (3C60) suits
Suits less active adults, mobility grades 1 to 3, with a transfemoral amputation or a knee or hip disarticulation, including people who also use a wheelchair. A prosthetist programmes it through the connectgo.pro app during fitting.
This kind of device is prescribed and fitted by a clinician. An enquiry starts that conversation. It is not a purchase.
Figures for comparing
- Weight
- 0.907 kg (2.0 lb)
- Max user weight
- 150 kg (331 lb)
The same units on every product, converted from the specifications below. Where a source gives two limits, the lower one is shown.
Ottobock Kenevo (3C60) specifications
| Mobility grade | 1 to 3 |
|---|---|
| Max body weight | 150 kg (330 lb) |
| Knee flexion | 124 degrees |
| Weight | 2 lb without tube adapter |
| Moisture rating | IP54 |
| Frame | Carbon fibre |
| Charging | Daily, overnight |
| App | connectgo, iOS and Android |
| Amputation level | Transfemoral, knee and hip disarticulation |
| Maker country | Germany |
| Price | Quoted on request |
| Brand | Ottobock |
| Category | Lower limb - knees, hips and leg systems, Microprocessor knees |
| Catalog ID | PR-030 |
Compared with the source page on 5 October 2026. Details can change, so we confirm them in your quote. Open the source page.
Ottobock Kenevo (3C60): common questions
Who is the Ottobock Kenevo for?
It is meant for less active users in mobility grades 1 to 3, for daily use and rehabilitation.
Can I use the Kenevo with a wheelchair?
Yes. It has a dedicated wheelchair mode, as well as support for sitting down and standing up.
Is the Kenevo waterproof?
No. It is rated IP54, which covers dust and water splashes, and it is not corrosion resistant.
How to get a quote for the Ottobock Kenevo (3C60)
Add it to your enquiry list
Press Add to enquiry. You can add other products and parts to the same list.
Tell us your country and needs
Send the list with your country, sizes and any options you want. No payment details are asked.
Get a personal reply
You receive availability, a price and delivery options by email, and decide after that.
Similar to the Ottobock Kenevo (3C60)
All Lower limb - knees, hips and leg systemsPrice on request
Power Knee
Microprocessor knees. A motor-powered microprocessor knee that adds active movement.
Price on request
Orion3
Microprocessor knees. A microprocessor knee with hybrid hydraulic and pneumatic control.
Goes with this product
Guides for this kind of product
Money & Funding · 8 min read
What a prosthetic leg really costs and who pays
A prosthetic leg is a fitted service, not a boxed product. Here is what the bill is made of and which funding routes to ask about first.