USD 1,065 per pair (manufacturer list)
Lite Extreme LX
Rear wheels - fibre-spoked. Everyday rear wheelset with 12 radially laced PBO fibre spokes that damp vibration and leave room to reach through the wheel.
Wheelchair parts and accessories
Last updated: 5 October 2026 · Total: 356 products
Much of how a wheelchair feels comes from the parts fitted to it. This section gathers them in eleven groups. Rolling parts cover rear wheels, handrims, tires, casters, forks, axles, brakes and anti-tippers. Body contact parts cover footrests, armrests, side guards, seat cushions, backrests, headrests, belts and harnesses. For power chairs there are batteries, chargers, joysticks, alternative controls and motors. The last two groups hold everyday extras such as bags, lights and cup holders, and the tools and lubricants that keep a chair running. Most parts must match the size and model of your chair.
Categories in this section
- Wheels, handrims and tires 114
- Casters, forks and front attachments 17
- Axles, brakes and anti-tippers 15
- Footrests, armrests and side guards 23
- Seat cushions 16
- Backrests, postural supports and headrests 10
- Belts and harnesses 5
- Batteries and chargers 19
- Drive controls, motors and controllers 23
- Everyday accessories 52
- Tools and maintenance 62
356 products
Filter and sort these productsUSD 365 per pair (manufacturer list)
Wire Wheel
Rear wheels - steel-spoked (wire). Entry-priced conventional wire-spoked rear wheelset from Spinergy's range.
approx. USD 3,100+ (from GBP 2,404, manufacturer)
Urban
Rear wheels - suspension (composite springs). Rear wheel that replaces spokes with carbon composite springs to absorb shock and vibration in everyday use.
approx. USD 3,300+ (from GBP 2,576, manufacturer)
Extreme
Rear wheels - suspension (composite springs). Suspension wheel on a 507 mm rim taking MTB-style tyres for off-road use and power add-ons.
USD 379.99 per pair (retailer)
Natural-Fit Original Handrim
Handrims - ergonomic. Ergonomic handrim pairing an oval rim with a contoured thumb rest to give a fuller, less strained grip.
USD 175-340 per pair (retailer)
Newton AirGrips Handrims
Handrims - coated / high-grip. Lightweight coated handrims giving more hand friction with a finish designed not to crack or peel.
approx. USD 70 (EUR 65, manufacturer)
Ultra-Grrrip Push Rim Covers
Handrim covers. Slip-on coloured covers that add grip to existing pushrims and hide scratches, with a treaded version for weak grip.
approx. USD 52 (EUR 47.90 RRP)
Marathon Plus Wheelchair
Tires - puncture-resistant pneumatic. Heavily puncture-protected pneumatic tyre with a low-marking compound and grippy sidewalls.
USD 36.95-42.95 each (manufacturer shop)
Kobra (K885)
Tires - off-road. Wide semi-slick tyre with a flat centre and knobbly shoulders for moving between pavement and rough ground.
approx. USD 39-46 (GBP 29.63 ex VAT / 35.56 inc VAT, retailer)
Solid Wheelchair Tyre 24 x 1 3/8 (GTC24MB)
Tires - solid / puncture-proof. Flat-free microcellular polyurethane tyre that replaces a pneumatic tyre and tube and needs no maintenance.
approx. USD 48 (GBP 36.90 RRP, retailer)
Shox 24 x 1 Solid Tyre
Tires - solid / puncture-proof. Narrow lightly treaded solid tyre for performance wheels, firm like a high-pressure pneumatic.
USD 8.23 RRP (manufacturer)
Tube No. 9A (AV9A) 24 in
Inner tubes. Standard butyl inner tube for narrow 24 in wheelchair and bicycle tyres.
USD 8.95 (manufacturer shop)
Standard 25 wheelchair tube
Inner tubes. Basic Schrader-valve inner tube from Kenda's wheelchair tube range.
USD 299.99 per pair (manufacturer)
Phase I Suspension Fork
Suspension caster forks. Shock-absorbing caster fork pair that soaks up impacts and helps casters ride over small obstacles.
Out of stock at source
USD 499.99 per set (manufacturer)
Frog Legs II Carbon Fiber Suspension System
Suspension caster forks. Composite-blade suspension fork set supplied with soft-roll casters and bearings.
USD 159.98 per pair (manufacturer)
EPIC Aluminum Wide Softroll Caster
Caster wheels. Machined aluminium-hub caster with an arched solid urethane tread that pivots easily and resists sinking into carpet.
from USD 199.99 per pair (manufacturer)
Whisper Shock Absorber Wheel
Caster wheels. Shock-absorbing caster wheel sold in pairs within the Frog Legs range.
USD 649 sale / 899 regular (manufacturer)
FreeWheel Wheelchair Attachment
Front free-wheel attachments. Clamp-on front wheel that lifts the casters off the ground, turning a rigid chair into a three-wheeler for rough terrain.
USD 159 (manufacturer)
FreeWheel Adaptor for Folding Chair
Front free-wheel attachments. Adaptor that lets the FreeWheel front wheel be fitted to folding-frame wheelchairs.
approx. USD 38-64 (GBP 29-49, retailer)
Quick Release Wheelchair Axle Pins
Quick-release axles. Hardened stainless quick-release axle with an anodised push button, supplied with spacers and spanners.
USD 28.50 each (retailer)
Big Button Quick Release Axle 1/2 in x 5 1/4 in
Quick-release axles. Stainless quick-release axle with an oversized push button that is easier to operate.
USD 45.45 sale / 57 regular (retailer)
Composite Wheel Locks
Brakes / wheel locks. Fibre-reinforced composite wheel locks, roughly half the weight of aluminium ones, with textured handles.
approx. USD 95 (GBP 73.30 ex tax, retailer)
Compact EVO Wheel Lock
Brakes / wheel locks. Retracting-lever brake that tucks away from the hands like a scissor lock but is reached like a push-to-lock.
USD 107.75 (retailer)
Aluminum Scissor Wheel Lock
Brakes / wheel locks. Aluminium scissor-style wheel lock intended as a universal replacement brake.
USD 16-86 per pair depending on model (retailer)
Anti-Tipper with Wheels (STDS802 and variants)
Anti-tippers. Pair of rear anti-tip bars with small wheels that stop the chair tipping backwards.
USD 59 per pair (manufacturer shop)
Elevating Legrests with Composite Footplates (T94HCP)
Legrests and footplates. Pair of tool-free swing-away elevating legrests with padded calf pads and composite footplates.
Price on request
Ankle Huggers
Foot positioning. Padded ankle and foot supports that hold the foot on the footplate without the pressure of rigid shoe holders.
USD 154 sale / 198 regular (retailer)
Rigid Removable Carbon Fiber Side Guards
Side guards. Very light solid carbon side guards on two aluminium posts that keep clothing off the wheels.
approx. USD 94 (GBP 72.49 ex tax, retailer)
Adult Plastic Sideguard
Side guards. Removable plastic side guard that clamps to the frame, in the newer style with a handle hole.
Price on request
Armrest Pad / Active Wheelchair Armrest Pad
Armrest pads. Soft gel elbow pads, including a version made for the tubular armrests of active chairs.
Price on request
Quadtro Select Cushion
Air cushions. Adjustable air-cell cushion with four compartments that can be locked off while seated to hold a position.
Price on request
Adjuster O2
Air cushions. Fully machine-washable cushion filled with small sealed air cells in five adjustable compartments.
Price on request
Evolution Wave
Air-foam cushions. Light air-foam flotation cushion on a solid positioning base with a three-position pressure valve.
USD 395 sale / 494 regular (manufacturer)
Stimulite Classic Cushion
Honeycomb cushions. Three-layer flexible honeycomb cushion that can be machine washed and dried.
Price on request
Union Cushion
Fluid / gel and foam cushions. Skin-protection cushion layering a fluid pad over contoured foam with a visco top and a dual cover.
Price on request
Basic Cushion
Foam cushions. Thin, mildly contoured foam cushion with a bevelled base to counter sling-seat hammocking.
Price on request
The Pilot Wheelchair Cushion
Fluid / gel and foam cushions. Low-profile cushion made from Akton dry viscoelastic polymer gel for immersion and skin protection.
Price on request
OWL CARE series
Fluid / gel and foam cushions. Japanese gel wheelchair cushion line aimed at pressure-sore prevention and comfortable sitting.
Price on request
J3 Back
Rigid backrests. Modular rigid back offered in many widths, heights and contour depths to match trunk support needs.
Price on request
Vigour Back Support
Rigid backrests. Ventilated full-height rigid back with wide angle and depth adjustment and a modular accessory system.
Price on request
Matrx E2 Back
Rigid backrests. Contoured back shell with scapular and hip cut-outs and rippled foam for airflow.
Price on request
Icon Back System Low
Rigid backrests. Low-profile back with an air-foam cushion and single-tool locking hardware that removes one-handed.
USD 760-840 (retailer)
Carbon Fiber Backrest 10 in Low
Rigid backrests. Carbon fibre back shell in active or deep contour with a choice of fixed, adjustable or quick-release mounts.
USD 1,215-1,650 (retailer)
Tarta Wheelchair Backrest
Dynamic / flexible backrests. Spine-and-rib style flexible backrest in which each segment can be adjusted.
Price on request
Swing-Away Lateral Trunk Support
Lateral trunk supports. Lateral trunk support on swing-away hardware from the Spex modular range.
Price on request
Comfort Plus Series (CP / TCP / ACP)
Headrests. Curved headrest pads in single-pad, fixed-wing and adjustable-wing versions with washable cooling covers.
Price on request
Comfort Head Support
Headrests. General-purpose head pad with occipital shaping on an aluminium shell, suited to tilt, recline and transport.
Price on request
2-point Quad Belt with DuraLatch
Pelvic belts. Two-point positioning belt whose latch can be worked with limited or no hand function.
Price on request
Stayflex Chest Support
Chest and shoulder harnesses. Chest support giving firm trunk control while leaving the shoulders freer than a shoulder harness.
Price on request
PivotFit Shoulder Harness
Chest and shoulder harnesses. Four-point shoulder harness in Bodypoint's upper-body support range.
USD 269.96 each (retailer)
M22NF SLD G
Batteries - lead-gel. Sealed, maintenance-free deep-cycle gel battery in the Group 22NF size.
Price on request
12V 46Ah Deep Cycle U1 LiFePO4
Batteries - lithium. Lithium iron phosphate battery in a U1 case, far lighter than the lead-acid equivalent.
approx. USD 970 (GBP 748.60 ex tax, retailer)
e-fix E35 Spare Battery 7.5 Ah
Batteries - lithium. Slim lithium-ion battery pack for the e-fix power add-on that fits and removes with one hand.
USD 179 (retailer, pre-owned unit)
24V 8A Dual Mode Automatic Charger
Chargers. Automatic 24 V, 8 A charger for power wheelchairs.
approx. USD 330 (GBP 254.12, retailer)
e-motion M25 Replacement Battery Charger
Chargers. Genuine replacement charger for the e-motion M25 power-assist wheels.
Price on request
R-net CJSM2 Joystick Module
Curtiss-Wright (PG Drives Technology)
Joysticks - standard. Colour-screen joystick module for R-net power chairs that can also learn infrared commands and optionally link by Bluetooth.
Price on request
LiNX REM400
Joysticks - standard. Touchscreen-first power chair remote with programmable buttons and Bluetooth for device and environmental control.
Price on request
Micro Joystick
Joysticks - mini / low-force. Tiny, very light-touch proportional joystick operable by finger, chin, tongue or lip.
Price on request
MicroGuide
Joysticks - mini / low-force. Light-touch proportional mini joystick with real stick movement, mountable at the hand, midline or chin.
Price on request
ASL 125 Orbit Bluetooth Joystick
Chin controls. Compact joystick for chin or hand mounting that can switch to Bluetooth mouse emulation.
Price on request
Dual Pro
Head controls. Head array offering proportional, switched or hybrid control, programmable on the chair.
Price on request
ASL 110 FUSION Head Array
Head controls. Head array switchable between digital and proportional driving with per-direction force adjustment.
Price on request
i-Drive
Sip-and-puff and switch interfaces. Drive-control hub that accepts sip-and-puff, proximity, mechanical and fibre-optic switches, head or tray arrays and a mini joystick in any mix.
Price on request
R-net Omni2 Speciality Control Interface
Curtiss-Wright (PG Drives Technology)
Sip-and-puff and switch interfaces. Display and interface unit that connects speciality inputs such as sip-and-puff, head controls, switches and scanners to R-net chairs.
Price on request
Sip/Puff Switch
Sip-and-puff and switch interfaces. Breath-operated dual pressure switch with headset or gooseneck mounting that can clamp to a wheelchair.
Price on request
Ability Drive with Drive by Eye
Eye control. Drive interface that lets a person steer a power wheelchair with eye gaze using on-screen buttons.
Price on request
R-net PM2 140A
Curtiss-Wright (PG Drives Technology)
Controllers and power modules. New-generation R-net power module handling drive, battery monitoring and inhibits for power chairs.
Price on request
LiNX DS drive controllers (DS90-DS180)
Controllers and power modules. Family of LiNX power chair drive controllers supporting wireless diagnostics and firmware updates.
Price on request
Electric wheelchair motor
Motors. OEM drive motor line for electric wheelchairs from a Chinese motor maker; details on request.
approx. USD 105 (EUR 94.95, manufacturer)
Bag V-ZW (vertical)
Bags. Small vertical bag that attaches to the wheelchair via an adapter and comes with a shoulder strap.
Price on request
Monster Bag (B1113)
Bags. Very large framed seat-back bag that stays open for shopping or laundry.
approx. USD 43-54 (EUR 39-49, manufacturer)
Stash and Flash Wheelchair Backpack
Bags. Light backpack with a reflective strip that fits chairs with or without push handles.
Price on request
Unbreakable Cupholder - Vertical Grip (A1326)
Cup holders. Soft polyester cup holder with a cord lock, made to avoid the breakage of rigid holders.
approx. USD 33 (EUR 29.95, manufacturer)
Cupholder CH-1
Cup holders. Cup holder from the Quokka wheelchair accessory range.
Out of stock at source
approx. USD 38 (EUR 34.95, manufacturer)
Smartphone Case NSC-ZW
Phone and device mounts. Phone pouch with card pockets that attaches to a wheelchair adapter.
Price on request
Mount'n Mover device mounts
Mount'n Mover (BlueSky Designs)
Phone and device mounts. Movable wheelchair mounting arms, manual or powered, with attachments for phones, tablets, laptops and trays.
approx. USD 27-66 (EUR 25-60, manufacturer)
wUnderGlow Wheelchair Lights
Lights and reflectors. Clip-on micro lights for the seat sling with a white beam and a multicolour underglow LED.
approx. USD 16-55 (EUR 15-50, manufacturer)
Wheels On Fire Spoke Reflectors
Lights and reflectors. Spoke reflectors that improve the visibility of the wheels.
approx. USD 50 (EUR 45, manufacturer)
Rayne Shield
Rain and weather protection. Compact waterproof leg cover that packs into its own bag.
Price on request
WeatherBreaker Canopy (Base Model)
Rain and weather protection. Universal overhead canopy giving sun and rain cover on power chairs and scooters.
approx. USD 38 (EUR 35, manufacturer)
Gator Gloves
Gloves. Fingerless leather gloves that open very wide and close with a hook-and-loop style fastener, with a grip palm.
approx. USD 38 (EUR 35, manufacturer)
Ultra-Grrrip Half-Finger Gloves
Gloves. Half-finger leather pushing gloves for grip and hand protection.
approx. USD 54-83 (EUR 49-75, manufacturer)
Portable Wheelchair Tray
Trays. Beanbag-based lap tray needing no installation that can be secured round the waist and converts to a backpack.
approx. USD 65 (GBP 49.95 inc VAT, manufacturer)
Curve Connect
Trays. Lap-desk bag with a curved edge that sits against the waist and a hook-and-loop-receptive tray top.
USD 199.99 (manufacturer)
Professional Wheelchair Bearing Removal and Installation Tool Kit
Tool kits. Complete kit for pulling and pressing wheelchair bearings, with stand and work mat.
USD 54.99 (retailer)
Hex-Plus Metric and SAE Hex Key Set
Tool kits. Combined metric and imperial hex key set sold by a wheelchair parts specialist.
USD 19.99 sale / 25 regular (retailer)
Wheelchair Grease and Lubricant Kit
Lubricants and care. Two-part kit with lithium grease for bolts and bearings and a dry lube for quick-release axles.
approx. USD 38 (EUR 35, manufacturer)
Wheelchair Slippers (tire covers)
Protective covers. Slip-on tyre covers for the rear wheels; matching caster 'Socks' are sold separately or as a bundle.
from USD 35 (Schwalbe US); EUR 33.90 RRP (Schwalbe)
DownTown 24 x 1 3/8
Tires - pneumatic everyday. A grey all-round wheelchair tire in the common 37-540 size with a K-Guard puncture layer and grippy 2Grip sidewalls.
USD 35-36.50 per pair (Sportaid)
Orion Grey 22/24/26 x 1 3/8
Tires - pneumatic everyday. A grey non-marking everyday wheelchair tire offered in three diameters, all 1 3/8 in wide and rated to 65 psi.
USD 45 per pair (Sportaid)
Passage 24/25 x 1
Tires - pneumatic everyday. A narrow 100 psi wheelchair tire with a deeper tread than a typical court tire, made in 24 and 25 in.
USD 39.50-44.50 per pair (Sportaid)
V-Trak Black Side 24 x 1
Tires - pneumatic everyday. A 24 x 1 in non-marking wheelchair tire with black sidewalls and a coloured tread, rated at 100 psi.
from USD 23.73 (Monster Scooter Parts)
C62 20 x 1 3/8 (37-451)
Tires - pneumatic everyday. A grey 20 in pneumatic wheelchair tire with a street tread for small-wheel and children's chairs.
from USD 27.45 (Monster Scooter Parts)
C245 26 x 1 3/8
Tires - pneumatic everyday. A grey 26 x 1 3/8 in pneumatic wheelchair tire with a street tread, rated to 65 psi.
from USD 69 (Schwalbe US); EUR 46.90 RRP (Schwalbe)
RightRun Plus 24 x 1
Tires - puncture-resistant pneumatic. A slick 24 x 1 in wheelchair tire that adds Schwalbe's thick SmartGuard layer to the RightRun pattern.
USD 65-66.50 per pair (Sportaid)
Sentinel 24/25/26 x 1
Tires - puncture-resistant pneumatic. A black non-marking 125 psi wheelchair tire with a two-layer nylon casing and a 3 mm anti-puncture insert.
Out of stock at source
USD 55 per pair (Sportaid)
Extreme Kevlar 24 x 1 3/8
Tires - puncture-resistant pneumatic. A grey non-marking 24 x 1 3/8 in wheelchair tire reinforced with Kevlar and rated to 90 psi.
USD 45 per pair (Sportaid)
Court Iron Cap 24/25/26 x 1
Tires - puncture-resistant pneumatic. A 110 psi court and everyday wheelchair tire with Kenda's Iron Cap puncture-resistant belt, in several tread colours.
USD 39.60 per pair (Sportaid)
Konstrictor K1051 24/25/26 x 1
Tires - puncture-resistant pneumatic. A 100 psi sport and everyday wheelchair tire with a snakeskin-style shoulder pattern, R2C compound and a CAP puncture layer.
GBP 26.33 each ex tax (EPC Wheelchairs)
Koncept 24 x 1 (23-540)
Tires - puncture-resistant pneumatic. A 24 x 1 in herringbone-tread wheelchair tire with Iron Cap protection for everyday and sport use, in grey, red or blue.
Pre-order at source
GBP 21.54 each ex tax (EPC Wheelchairs)
Speedlite 24 x 1 (25-540)
Tires - puncture-resistant pneumatic. A black non-marking 24 x 1 in wheelchair tire with a fine herringbone sport tread and a puncture protection layer.
GBP 30.77 each ex tax (EPC Wheelchairs)
Trailblazer 24 x 1 (25-540)
Tires - puncture-resistant pneumatic. A black non-marking 24 x 1 in everyday wheelchair tire with a fine block tread and a puncture protection layer.
USD 79 per pair (Sportaid); from USD 68 (Schwalbe US)
One Wheelchair 24/25 x 1
Tires - sport / high pressure. A folding race-derived wheelchair tire with a triple compound and V-Guard protection, sold in 24 and 25 in.
from USD 85 (Schwalbe US); EUR 65.90 RRP (Schwalbe)
Dunk King 26 x 1
Tires - sport / high pressure. A 250 g folding tire for indoor sports wheelchairs, shaped for wheels set at negative camber.
USD 45-49.50 per pair (Sportaid)
Racers 25 x 1 (20-559)
Tires - sport / high pressure. A very narrow 20 mm non-marking tire for 25 in wheels, rated at 110 psi and offered in grey, red or orange.
USD 48 per pair (Sportaid)
Super H 700 x 28 (28-622)
Tires - sport / high pressure. A 700 x 28 pneumatic tire for wheelchairs built on 622 mm rims, for court or everyday use.
USD 24.25 each (Sportaid)
24 x 1 (25-520) Clincher Handcycle Tire
Tires - sport / high pressure. A 240 g clincher tire in the 520 mm size used on handcycle and racing-chair wheels, with black tread and tan sidewall.
USD 79.50 per pair (Sportaid)
Nevegal 24/26 x 2.1
Tires - off-road. A black knobby tire in 2.1 in width for all-terrain wheelchair wheels, in 54-540 and 54-559 sizes.
Out of stock at source
USD 85.50-88 per pair (Sportaid)
Raptor 24/26 x 2.1
Tires - off-road. A non-marking black all-terrain wheelchair tire with an aggressive tread, in 56-540 and 56-559.
USD 42.50 per pair (Sportaid)
Knobby Black Side 24 x 1 3/8
Tires - off-road. A knobby tire in the standard 37-540 width, with non-marking grey tread and black sidewalls.
USD 48 per pair (Sportaid)
Orion Solid 24 x 1 3/8
Tires - solid / puncture-proof. A full-profile solid polyurethane tire in 37-540 with a street tread, needing no tube or air.
USD 47.50 per pair (Sportaid)
G2 Solid 24/25 x 1
Tires - solid / puncture-proof. A treaded solid tire for 1 in sport-style rims, with firmness described as equal to 110 psi.
USD 42.94 (Monster Scooter Parts)
STDS1009 24 x 1 Solid Urethane Treadless Tire
Tires - solid / puncture-proof. A black treadless solid urethane tire, the 24 x 1 in replacement for several Drive Medical manual wheelchairs.
Out of stock at source
from USD 11.83 (Monster Scooter Parts)
K23B 8 x 1 1/4 Pneumatic Caster Tire
Tires - caster. A grey non-marking ribbed pneumatic tire in 8 x 1 1/4 in, used on wheelchair casters and small scooter and power chair wheels.
Out of stock at source
from USD 21 (Monster Scooter Parts)
K301 7 x 1 3/4 Pneumatic Tire
Tires - caster. A grey non-marking ribbed pneumatic tire in the less common 7 x 1 3/4 in size for casters and small mobility wheels.
Out of stock at source
USD 31.98 (Monster Scooter Parts)
8 x 2 (200x50) Solid Urethane Ribbed Tire, Light Grey
Tires - caster. A light grey solid urethane 8 x 2 in tire with ribbed tread for power chair casters, flat free and latex free.
Discontinued
from USD 23.63 (Monster Scooter Parts)
C51 12 1/2 x 2 1/4 Pneumatic Tire
Tires - power chair drive. A grey non-marking 12 1/2 x 2 1/4 in pneumatic tire with a street tread for compact power chairs.
Discontinued
from USD 23.33 (Monster Scooter Parts)
Power Express C628 12 1/2 x 2 1/4 Pneumatic Tire
Tires - power chair drive. A grey non-marking 12 1/2 x 2 1/4 in pneumatic tire with the C628 Power Express knobby tread.
Out of stock at source
USD 68.50 (Monster Scooter Parts)
12 1/2 x 2 1/4 Solid Polyurethane Tire, Grey
Tires - power chair drive. A solid grey polyurethane tire with knobby tread in 12 1/2 x 2 1/4 in, flat free and latex free.
from USD 17.99 (Monster Scooter Parts)
Spirit C179G 8 x 2 (200x50) Pneumatic Tire
Tires - scooter. A grey non-marking 200x50 pneumatic tire with ribbed Spirit tread that fits many travel scooters and small power chairs.
USD 48 (Monster Scooter Parts)
IA-2817 8 x 2 (200x50) Foam-Filled Tire
Tires - scooter. A grey non-marking 200x50 tire with a solid foam insert, giving flat-free running on travel scooters.
Out of stock at source
USD 47.75 (Monster Scooter Parts)
Rebel C968G 8 x 2 (200x50) Foam-Filled Tire
Tires - scooter. A foam-filled 200x50 tire with the knobby Rebel tread, replacing pneumatic or flat-free 8 x 2 in tires.
from USD 30.99 (Monster Scooter Parts)
Powertrax C248 3.00-4 (10 x 3) Pneumatic Tire
Tires - power chair drive. A grey non-marking 3.00-4 pneumatic drive tire with the knobby Powertrax tread, used on many power chairs and scooters.
from USD 64.99 (Monster Scooter Parts)
Powertrax C248 3.00-4 (10 x 3) Foam-Filled Tire
Tires - power chair drive. A grey non-marking 3.00-4 foam-filled flat-free drive tire with Powertrax knobby tread, in two bead widths and two load grades.
USD 139.99 (Monster Scooter Parts)
Powertrax C248 14 x 3 (3.00-8) Foam-Filled Tire
Tires - power chair drive. A 14 x 3 in foam-filled drive tire with non-marking Powertrax tread for Jazzy 1122 and Quantum Q6 Edge, Q600 and R-4000 chairs.
from USD 36.99 (Monster Scooter Parts)
Grande C203 9 x 3.50-4 Pneumatic Tire
Tires - power chair drive. A grey non-marking 9 x 3.50-4 pneumatic tire with knobby Grande tread, rated at 50 psi.
Out of stock at source
USD 73.99 (Monster Scooter Parts)
Power Plant C177G 2.50-8 Foam-Filled Tire
Tires - power chair drive. An 11 in 2.50-8 foam-filled flat-free tire with knobby tread in grey non-marking rubber, listed for Permobil C400 chairs.
Out of stock at source
USD 113.27 (Monster Scooter Parts)
C189 4.10/3.50-4 Foam-Filled Tire
Tires - power chair drive. A foam-filled flat-free 4.10/3.50-4 tire with sawtooth tread, listed for the Hoveround Teknique FWD.
USD 54.99 (Monster Scooter Parts)
Spirit C179G 2.80/2.50-4 (9 x 3) Foam-Filled Tire
Tires - scooter. A foam-filled 2.80/2.50-4 scooter tire with ribbed Spirit tread, nominally 9 x 3 in.
from USD 29.63 (Monster Scooter Parts)
Power Edge C178G 2.80/2.50-4 (9 x 3) Pneumatic Tire
Tires - scooter. A grey non-marking 2.80/2.50-4 pneumatic scooter tire with sawtooth Power Edge tread for indoor and outdoor use.
from USD 42.82 (Monster Scooter Parts)
Diamond Knobby C154G 4.00-5 (13 x 4) Pneumatic Tire
Tires - scooter. A black 4-ply-rated 4.00-5 pneumatic tire with diamond knobby tread for large outdoor scooters.
Pre-order at source
USD 38.33 (Monster Scooter Parts)
90/70-10 Tubeless Pneumatic Scooter Tire
Tires - scooter. A tubeless 90/70-10 street tire for eWheels EW-36 and EW-36 Elite scooters, usable front or rear.
USD 133.86 (Monster Scooter Parts)
Ability C168G 4.10/3.50-6 Foam-Filled Tire
Tires - scooter. A grey non-marking, latex-free 4.10/3.50-6 foam-filled tire with knobby tread for heavy-duty Pride scooters and Quickie P-220 chairs.
from USD 110.58 (Monster Scooter Parts)
C9328 13 x 4 (13x4.00-8) Low Profile Pneumatic Tire
Tires - scooter. A black low-profile 13x4.00-8 pneumatic tire with 4 ply rating and 48 psi maximum for Pride Pursuit and Victory XL scooters.
USD 6.99 (Sportaid)
Wheelchair Tube 24 x 1 Schrader (2556)
Inner tubes. A standard 24 x 1 in wheelchair inner tube with a straight Schrader valve, sold singly by the US retailer Sportaid.
USD 6.99 (Sportaid)
Wheelchair Tube 24 x 1 Presta (2556PR)
Inner tubes. A 24 x 1 in wheelchair inner tube with a Presta valve for rims drilled with the narrower valve hole.
Out of stock at source
USD 10.50 (Sportaid)
Heavy Duty Wheelchair Tube 24 x 1 Schrader
Inner tubes - thorn-resistant and self-sealing. A thick-walled Kenda tube for 24 x 1 in wheelchair tires, built to resist punctures at high pressure.
USD 6.99 (Sportaid)
Wheelchair Tube 25 x 1 Presta (2560PR)
Inner tubes. A 25 x 1 in wheelchair inner tube with a Presta valve for 559 rims.
USD 6.99 (Sportaid)
Wheelchair Tube 26 x 1 Schrader
Inner tubes. A Kenda inner tube for 26 x 1 in wheelchair tires on 590 rims, with a Schrader valve.
USD 6.99 (Sportaid)
Wheelchair Tube 22 x 1 Schrader (2557)
Inner tubes. A 22 x 1 in inner tube with a Schrader valve for small-diameter manual wheelchair wheels.
USD 6.25 (Sportaid)
Tube 20 x 1-1/8 to 1-1/4 Presta, handcycle (2650)
Inner tubes. A light 20 in inner tube with a 42 mm Presta valve, listed for 20 in handcycle rims.
EUR 9.90 RRP (Schwalbe)
Tube No. 9 (24 in)
Inner tubes. Schwalbe's standard butyl tube No. 9 for 24 in wheels, covering 28 to 37 mm tires on 540 rims.
EUR 9.90 RRP (Schwalbe)
Tube No. 12 (26 in)
Inner tubes. Schwalbe's butyl tube No. 12, a mid-width 26 in tube that spans both 559 and 590 rim diameters.
EUR 9.90 RRP (Schwalbe)
Tube No. 6 (20 in)
Inner tubes. Schwalbe's butyl tube No. 6 for narrow 20 in tires on 406 rims, weighing 95 g.
GBP 8.95 ex tax (EPC Wheelchairs)
22 x 1 3/8 in (37-501) Schrader Valve Inner Tube
Inner tubes. A 22 x 1 3/8 in inner tube with a straight Schrader valve for 37-501 wheelchair tires.
USD 10.50 (Sportaid)
Heavy Duty Wheelchair Tube 24 x 1-3/8 Schrader (2553)
Inner tubes - thorn-resistant and self-sealing. A heavy duty inner tube for 24 x 1 3/8 in (37-540) everyday wheelchair tires, with a Schrader valve.
USD 18.29 (Slime)
Extra Strong Self-Sealing Tube 26 x 1.375 Schrader
Inner tubes - thorn-resistant and self-sealing. A 26 x 1.375 in inner tube that comes pre-filled with Slime sealant to close small tread punctures as they happen.
USD 6.99 (Sportaid)
Front Caster Tube 8 x 1-1/4 Straight Valve (2546)
Inner tubes - caster and power chair. An inner tube for 8 x 1 1/4 in pneumatic wheelchair casters, with a straight valve stem.
USD 10.50 (Sportaid)
Front Caster Tube 8 x 2 with 45 Degree Valve (2545-45)
Inner tubes - caster and power chair. An inner tube for 8 x 2 in wheelchair casters with a valve stem angled at 45 degrees for easier pump access.
USD 9.50 (Sportaid)
Wheelchair Tube 10 x 3 Straight Valve (2564)
Inner tubes - caster and power chair. A 10 x 3 in inner tube with a straight valve stem for wide small-diameter wheelchair wheels.
EUR 9.90 RRP (Schwalbe)
Tube No. 1 (12 in)
Inner tubes - caster and power chair. Schwalbe's butyl tube No. 1 for 12 in wheels with 47 to 62 mm tires, offered with straight or 45 degree valves.
GBP 6.50 ex tax (EPC Wheelchairs)
Tube 4 Mobility Pneumatic Inner Tube
Inner tubes - caster and power chair. An inner tube for 4 in rim mobility tires such as 2.80/2.50-4 and 3.00-4, with a 90 degree bent Schrader valve.
GBP 8.22 ex tax (EPC Wheelchairs)
12 1/2 x 2 1/4 Mobility Inner Tube Offset
Inner tubes - caster and power chair. An inner tube for 12 1/2 x 2 1/4 in mobility wheels with an offset Schrader valve angled at 45 degrees.
USD 7.50 per pair (Sportaid)
Hi-Pressure Wheelchair Rim Strips (pair)
Rim tape and rim strips. Adhesive polyester fabric rim strips from Kenda that cover spoke holes on high-pressure wheelchair rims.
EUR 2.90 RRP (Schwalbe)
High-Pressure Rim Tape
Rim tape and rim strips. Schwalbe rim tape that covers spoke holes and protects the tube, offered in many widths including 16-540 for wheelchair rims.
USD 12.75 per pair (Sportaid)
Wheelchair Tire Liners (pair)
Tire liners and inserts. A pair of liner strips that sit between tire and tube to stop thorns and glass reaching the tube.
Out of stock at source
USD 6.95 (Park Tool)
TL-1.2C Tire Levers
Tire levers. A set of three composite tire levers that snap together, with a spoke hook to hold a lever in place.
EUR 4.90 RRP (Schwalbe)
Tire Levers (set of 3)
Tire levers. Three Schwalbe levers shaped to clip onto the rim, which helps both when removing and when mounting a tire.
EUR 3.95 incl. tax (Zefal)
Z Levers (set of 3)
Tire levers. Three thin resin tire levers from Zefal with a reversible hook end for taking tires off and putting them back on.
USD 18.50 (Sportaid)
Wheelchair Tire Lever (10 in steel)
Tire levers. A 10 in chrome plated steel lever with a screwdriver-style handle and a wide shovel tip for stubborn tires.
USD 8.75 (Sportaid)
Tire Lever
Tire levers. A heavy-duty composite lever made for mounting and removing wheelchair tires, including solid polyurethane ones.
USD 5.95 (Park Tool)
VP-1C Vulcanizing Patch Kit
Puncture repair kits. A glue-type patch kit with six patches, sandpaper and vulcanizing fluid for permanent repairs to butyl tubes.
USD 6.95 (Park Tool)
GP-2C Pre-Glued Super Patch Kit
Puncture repair kits. Six self-adhesive patches and a sandpaper square in a 5 g box for quick roadside tube repairs without glue.
EUR 3.95 incl. tax (Zefal)
Repair Kit
Puncture repair kits. A compact Zefal tube repair kit with rubber cement and a stainless steel grater, offered in four versions.
USD 7.79 (Slime)
Peel & Stick Tube Repair Patches + Levers
Puncture repair kits. A pocket kit with six pre-glued patches, a metal scuffer and two tire levers for roadside tube repairs.
USD 10.39 (Slime)
Tube Sealant 8 oz
Tire sealant. A liquid sealant injected into an inner tube through the valve to seal small tread punctures as they occur.
USD 54.95 (Park Tool)
PFP-10 Home Mechanic Floor Pump
Pumps and inflators. A floor pump with gauge and a locking head that adjusts itself to Presta or Schrader valves, rated to 160 psi.
Price on request
JoeBlow Sport III
Pumps and inflators. A steel-barrel floor pump with a 3 in gauge and a TwinHead that fits Presta, Schrader and Dunlop valves, rated to 160 psi.
Price on request
Mini Dual DXG
Pumps and inflators. A dual-action aluminium mini pump with an in-line gauge and a head that fits Presta and Schrader valves.
USD 59.99 (Lezyne)
Micro Floor Drive HP
Pumps and inflators. A compact aluminium pump with a fold-out foot peg and hose that works like a small floor pump, rated to 160 psi.
USD 22.50 (Sportaid)
Air Chuck with 16 g CO2 Cartridge (1070)
Pumps and inflators. A metal push-to-inflate CO2 head supplied with two threaded cartridges for filling a tire in seconds without pumping.
USD 1.49 (Sportaid)
Presta Valve Adapter
Valve adapters and extenders. A small screw-on adapter that lets a Presta valve be inflated with a Schrader pump head.
EUR 2.00 RRP (Schwalbe)
DV/SV to AV Valve Adapter
Valve adapters and extenders. A brass adapter from Schwalbe that lets Dunlop and Presta valves take a Schrader (AV) pump head.
USD 12.50 per pair (Sportaid)
Presta Valve Extensions 30 mm (pair)
Valve adapters and extenders. A pair of 30 mm brass extensions that lengthen a Presta valve so it reaches through a deep rim.
Price on request
Airchecker
Pressure gauges. A 45 g digital tire pressure gauge with a swivelling dual head for Schrader and Presta valves, reading up to 10 bar.
USD 19.99 (wheelchairbearings.com)
R8 or 1/2" Wheelchair Blind Bearing Puller/Extractor
Bearing tools. A single-size puller for drawing R8 (1/2 inch bore) bearings out of wheelchair rear hubs and forks.
USD 19.99 (wheelchairbearings.com)
608 or 8mm Wheelchair Blind Bearing Puller/Extractor
Bearing tools. A single-size puller for 608 bearings with an 8 mm bore, the size found in many wheelchair front caster wheels.
Out of stock at source
USD 29.99 (wheelchairbearings.com)
R8 or 1/2" Wheelchair Bearing Press
Bearing tools. A press tool for removing and fitting R8 (1/2 inch bore) bearings in wheelchair rear hubs and forks.
USD 49.99 (wheelchairbearings.com)
Wheelchair Bearing Outer Race Removal Tools 608, R6 & R8 Kit 3-Pack
Bearing tools. Three tools that pull out a bearing outer race left stuck in a caster, fork, fork mount or rear hub after a bearing has come apart.
USD 32.99 (wheelchairbearings.com)
Wheelchair Bearing Removal and Installation Stand
Bearing tools. A hard maple block with a rubber top that supports a caster, wheel or fork while bearings are driven out or pressed in.
USD 14.99 (wheelchairbearings.com)
Snap Ring Pliers (Retaining Ring Pliers) for Wheelchair Forks and Caster Mounts
Bearing tools. Right-angle snap ring pliers with a spring-open action for the retaining rings found in some wheelchair forks and caster mounts.
USD 24.99 (wheelchairbearings.com)
Portable Wheelchair Work Mat 16" x 32"
Workshop equipment. A roll-up neoprene mat that keeps grease and small parts off the floor or table while working on a wheelchair indoors.
USD 149.99 (wheelchairbearings.com)
Wheelchair Wheel Truing Stand for 1/2" & 5/8" Wheelchair Axles
Spoke and wheel tools. A truing stand built for wheelchair wheels, with receivers for both 1/2 inch and 5/8 inch quick-release axles.
USD 15.99 (wheelchairbearings.com)
5/16 Brass and Aluminium Pin Punch
Bearing tools. A 5/16 inch soft-metal punch for tapping bearings out of wheelchair hubs, forks and casters.
USD 21.99 (wheelchairbearings.com)
Wheelchair Tire Lever (Pair)
Tire tools. A pair of steel tire levers with wide handles and a thumb loop, designed for wheelchair users with limited grip.
USD 19.99 (wheelchairbearings.com)
Tire Bead Jack
Tire tools. A hinged lever that lifts the last tight section of a tire bead over the rim edge during fitting.
USD 18.50 (sportaid.com)
Wheelchair Tire Lever (10 inch steel)
Tire tools. A 10 inch chrome-plated steel tire lever with a screwdriver-style handle and a broad shovel tip.
USD 65.00 (sportaid.com)
Wheelchair Tool Kit
Tool kits. A pouch of hand tools sold for maintaining Quickie wheelchairs, with both inch and metric hex keys.
USD 12.75 (sportaid.com)
Allen Wrench Set, 9-piece inch
Hex key sets. A nine-piece set of inch hex keys from .050 to 3/16, sold by a wheelchair retailer for socket-head fasteners.
Price on request
Ball End T-Handle Set 13189, 8-piece metric with stand
Hex key sets. Eight metric T-handle hex drivers from 2 to 10 mm in a bench stand, with ball ends on the larger sizes.
USD 12.95 (parktool.com)
SW-7.2 Triple Spoke Wrench
Spoke and wheel tools. One spoke wrench with three slots for 3.23, 3.30 and 3.45 mm spoke nipples.
USD 115.95 (parktool.com)
TM-1 Spoke Tension Meter
Spoke and wheel tools. A hand-held gauge that reads spoke tension so a wheel can be tensioned evenly.
USD 102.95 (parktool.com)
MW-SET.2 Metric Wrench Set
Wrenches. Twelve metric combination wrenches from 6 to 17 mm, each with an open end and a 12-point box end.
USD 24.95 (parktool.com)
PAW-6 6-Inch Adjustable Wrench
Wrenches. A compact adjustable wrench whose jaws open to 24 mm, sized for a travel tool bag.
USD 27.95 (parktool.com)
SD-SET Shop Screwdriver Set
Screwdrivers. Four shop screwdrivers: two Phillips and two flat blade, with dual-density grips.
USD 12.95 (parktool.com)
AWS-10 Fold-Up Hex Wrench Set
Hex key sets. Seven metric hex keys from 1.5 to 6 mm folded into one compact handle.
Out of stock at source
USD 100.95 (parktool.com)
TW-5.2 Ratcheting Click-Type Torque Wrench
Torque tools. A 3/8 inch drive click torque wrench covering 2 to 14 Nm in 0.2 Nm steps.
USD 15.95 (parktool.com)
HPG-1 High Performance Grease
Lubricants and care. A 113 g tube of NLGI Grade 2 bearing grease with a wide working temperature range.
USD 10.95 (parktool.com)
ASC-1 Anti-Seize Compound
Lubricants and care. A 113 g tube of anti-seize for threads and press fits in steel, aluminum and titanium.
USD 19.95 (parktool.com)
TLR-1 Medium-Strength Threadlocker
Thread lockers. A 10 mL bottle of medium-strength thread locker that holds bolts against loosening yet allows later removal.
Price on request
6003 Joker 11 Set 1 Combination Wrench Set
Wrenches. Eleven metric combination wrenches from 8 to 19 mm with a slim ring end, supplied on a hook-and-loop strip.
Price on request
Click-Torque A 6 Set 1, 2.5-25 Nm
Torque tools. A 20-piece kit built around a 1/4 inch hex drive click torque wrench covering 2.5 to 25 Nm.
USD 47.98 (wihatools.com)
9 Piece Ball End Color Coded Hex L-Key Set, Metric (66980)
Hex key sets. Nine colour-coded metric L-keys from 1.5 to 10 mm with ball ends, in a labelled holder.
USD 55.18 (wihatools.com)
13 Piece ErgoStar Ball End Hex L-Key Set, Inch (66988)
Hex key sets. Thirteen inch-size ball end L-keys from .050 to 3/8 in a holder that fans the keys open.
Price on request
Torq Stick 2-10 Nm
Torque tools. A compact adjustable torque wrench for 2 to 10 Nm with a ratcheting head and five bits.
USD 42.99 (pedros.com)
L Hex Wrench Set, 9 piece
Hex key sets. Nine long-arm metric L hex wrenches from 1.5 to 10 mm in a holder.
From USD 7.99 (finishlineusa.com)
Dry Chain Lubricant
Lubricants and care. A quick-drying drip or aerosol lubricant that sets to a dry, wax-like film and resists dirt pickup.
USD 14.99 (finishlineusa.com)
Speed Degreaser
Cleaners. An 18 fl oz aerosol degreaser that dissolves oily grime and dries in seconds without a water rinse.
From USD 10.99 (finishlineusa.com)
Premium Grease
Lubricants and care. A synthetic, water-resistant grease sold in a 3.5 oz tube and in 1 lb and 4 lb tubs.
Price on request
Dry Lube
Lubricants and care. A 10 oz spray lubricant that dries quickly to a film without sticky residue and resists dust buildup.
Price on request
Superior Lubricant Drip Bottle
Lubricants and care. A light oil with PTFE in 2 oz and 6 oz drip bottles with a straw for reaching into tight joints.
GBP 12.00 (muc-off.com, not converted)
Bike Protect 500ml
Lubricants and care. An aerosol spray that drives out water after washing and leaves a thin, non-sticky protective film.
GBP 17.00 for 750 ml (muc-off.com, not converted)
High Performance Waterless Wash
Cleaners. A spray-and-wipe cleaner that lifts surface dirt and polishes without water or rinsing.
USD 774.00 per pair (Sportaid; list USD 860)
SPOX Everyday
Rear wheels - fibre-spoked. An everyday rear wheel with PBO fibre spokes on a wide CNC-machined alloy hub, sold in four diameters.
USD 1,062.00 per pair (Sportaid; list USD 1,180)
Sport X-Laced XSLX
Rear wheels - fibre-spoked. A 24-spoke sport rear wheel with cross-laced 4 mm PBO fibre spokes and a double-walled aluminium rim.
USD 375.00 per pair (Sportaid; list USD 418)
Sentinel 24 in 12-spoke wheel
Rear wheels - spoked aluminium. A complete 24 in rear wheel with 12 straight-pull spokes, a double-wall aluminium rim, tyre and black handrim.
USD 269.00 base price (Sportaid)
Classic Wheelchair Wheels 24 x 1 in
Rear wheels - spoked aluminium. A custom-built 24 x 1 in spoked rear wheel with a double-wall rim and high-flange hub, supplied with tyres and handrims.
USD 299.00 per pair (Sportaid)
Vapor 13 Aluminum Wheelchair Wheels
Rear wheels - spoked aluminium. An 18-spoke aluminium rear wheel in 24 or 25 in with selectable hub, rim and handrim colours.
USD 326.50 per pair (Sportaid; list USD 430)
Shadow Wheel
Rear wheels - spoked aluminium. A matte black spoked rear wheel with a 6061 aluminium rim and hub, 14-gauge spokes and reflective graphics.
GBP 275.00 per wheel (EPC Wheelchairs); no USD price shown
Tensio Ray Classic Wheel 24 in
Rear wheels - fibre-spoked. A 24 in everyday rear wheel with 12 fibre spokes of 3.7 mm and an Omobic Trailblazer tyre fitted.
GBP 299.99 per wheel (EPC Wheelchairs); no USD price shown
Offroad Voyager Fat Wheel 24 in
Rear wheels - off-road. A 24 in wide off-road rear wheel supplied with a Schwalbe Crazy Bob tyre for a 1/2 in quick-release axle.
Pre-order at source
GBP 334.24 per wheel (EPC Wheelchairs); no USD price shown
Mountain Bike Wheels 24 in
Rear wheels - off-road. A cross-spoked off-road rear wheel with a knobbly tyre and a 22 in handrim, 24 in overall with the tyre.
USD 168.00 per pair (Spinergy)
Aluminum Handrims - Hard Anodized Grey
Handrims - aluminium. A pair of hard anodised grey aluminium handrims on 3/4 in tube with Q-tab mounting.
USD 780.00 per pair (Spinergy)
Titanium Handrims - Satin Finish
Handrims - titanium. A pair of satin-finished titanium handrims on 3/4 in tube with six Q-tabs.
USD 477.00 per pair (Sportaid; list USD 530)
TC MAX Stainless Steel Embossed Ergonomic Handrim
Handrims - ergonomic. An oval stainless steel handrim with an embossed surface texture, fixed by six Q-tabs.
USD 292.50 per pair (Sportaid; list USD 430)
Q-Grip Coated Handrim
Handrims - coated / high-grip. A pair of handrims with an anti-slip neoprene coating and six-point Q-tab mounting.
USD 284.00 per pair (Sportaid; Surge LT adds USD 20)
The Surge Handrim
Handrims - ergonomic. An oval ergonomic handrim offered in two profiles, Surge and Surge LT, with tab and rivnut mount options.
Pre-order at source
GBP 144.67 per handrim (EPC Wheelchairs); no USD price shown
Tetra Grip Plastic Coated Handrim 24 in
Handrims - coated / high-grip. A 24 in aluminium handrim with a hard black anti-slip plastic coating, made for users with tetraplegia.
Pre-order at source
GBP 99.95 per pair (EPC Wheelchairs); no USD price shown
Silicone Slip-on Handrim Covers 24 in
Handrim covers. A pair of silicone covers that slide over existing 24 in handrims to add grip.
USD 13.00 per spoke (Sportaid); nipple USD 0.75 extra
LX / SLX Wheelchair Spokes
Spokes and nipples. Replacement fibre spokes for Spinergy LX and SLX wheels, sold singly by wheel size and colour.
USD 50.00 per pair (Spinergy)
XSLX Hub Cap
Hub caps. A pair of hub caps made only for the Spinergy XSLX wheel.
USD 24.99 per 4-pack (Wheelchair Bearings)
R8 1/2 in ABEC-5 Rear and Fork Bearings (4-Pack)
Wheel bearings. A four-pack of R8 bearings with rubber seals for rear wheels and forks on chairs with a 1/2 in axle.
USD 21.99 per 4-pack (Wheelchair Bearings)
R6 ABEC-5 Front Caster Bearings (4-Pack)
Caster bearings. A four-pack of R6 caster bearings with rubber seals for front casters on a 3/8 in axle.
USD 19.99 per 4-pack (Wheelchair Bearings)
608 8 mm ABEC-5 Caster Bearings (4-Pack)
Caster bearings. A four-pack of 608 bearings with rubber seals for caster wheels on an 8 mm axle.
USD 24.99 per 4-pack (Wheelchair Bearings)
SR8 Stainless Steel Shower Wheelchair Bearings (4-Pack)
Wheel bearings. A four-pack of stainless steel SR8 bearings for shower wheelchairs with a 1/2 in axle.
USD 24.99 per 4-pack (Wheelchair Bearings)
R10 5/8 in ABEC-5 Rear Wheel Bearings (4-Pack)
Wheel bearings. A four-pack of R10 bearings for rear wheels that run on a 5/8 in axle, such as Spinergy R-10 models.
USD 82.00 per pair (Spinergy)
R8 Ceramic Hybrid Bearings
Wheel bearings. A pair of ceramic hybrid R8 deep-groove bearings for 1/2 in axle wheelchair wheels.
Out of stock at source
From USD 10.00 per kit (Frog Legs)
Caster Wheel Bearing Kits
Caster bearings. A kit of four caster bearings and two spacers, offered in standard, stainless, ceramic and TiLite versions.
Out of stock at source
From USD 159.98 per pair (Frog Legs)
EPIC Aluminum Narrow Court Caster
Caster wheels. A 1 in wide caster wheel with a 6061 T-6 aluminium hub and 608 bearings, sold in pairs.
Out of stock at source
From USD 199.98 per pair (Frog Legs; regular USD 249.99)
Aluminum Double Soft-Roll Caster
Caster wheels. A 1.4 in wide caster with an aluminium hub and urethane tread on 608 bearings, sold in pairs.
Out of stock at source
USD 49.99 per pair (Frog Legs)
AGOG Composite Caster
Caster wheels. A lower-cost Frog Legs caster with a five-spoke ABS hub, sold in pairs.
GBP 110.00 per caster (EPC Wheelchairs); no USD price shown
Slipstream Softroll Caster 4 x 1.4 in
Caster wheels. A 4 x 1.4 in soft-roll caster wheel from TiLite, sold singly in black or silver.
Out of stock at source
USD 539.99 per system (Frog Legs)
Phase II Trick Fork System
Suspension caster forks. A reinforced suspension fork pair with small caster wheels and a polymer lockout, backed by a lifetime warranty.
USD 150.00 per pair (Wheelchair Bearings)
Single Arm Fork With Axles and Spacer
Caster forks. A pair of single-arm caster forks with R8 bearings, three axle positions and mono axles for 8 mm casters.
Pre-order at source
GBP 96.93 ex tax per fork (EPC Wheelchairs); no USD price shown
61mm Anti Tip Fork Assembly
Caster forks. A sports anti-tip caster fork assembly for 61 mm caster wheels on RGK Elite and Grand Slam chairs.
USD 286.00 per pair (Spinergy)
Titanium Axle 1/2 in
Quick-release axles. A pair of 1/2 in quick-release axles with a large push button and a threaded nut for length adjustment.
USD 20.50 each (Sportaid)
Axle Sleeve
Axle sleeves and receivers. A threaded axle sleeve that receives a 1/2 in quick-release axle, sold singly.
USD 79.00 base price (Sportaid); clamps extra
Performance Aluminum Scissor Lock
Brakes / wheel locks. An aluminium scissor wheel lock for ultralight chairs with 1 in or 1-1/4 in frame tubing.
USD 174.99 per pair (Wheelchair Bearings)
Micro Adjustable All Aluminum Scissor Brakes
Brakes / wheel locks. A pair of anodised aluminium scissor brakes with a 6 mm screw adjustment set by a 3 mm hex key.
USD 84.99 per pair (Wheelchair Bearings)
Wheel Lock Extensions with Lanyard
Brakes / wheel locks. A pair of extension handles with lanyards for the composite wheel locks on TiLite chairs.
USD 996.00 per system (Wheelchair Bearings)
One-Handed Wheelchair Locking System
Brakes / wheel locks. A cable-operated hub lock that locks both Spinergy rear wheels from a single lever.
Pre-order at source
GBP 68.75 ex tax per side (EPC Wheelchairs); no USD price shown
Undermount Scissor Brake
Brakes / wheel locks. A scissor brake that mounts under the frame on a clamp, sold as separate left and right units.
GBP 320.00 per pair (EPC Wheelchairs); no USD price shown
S3 Anti Tip
Anti-tippers. A pair of chassis-integrated anti-tip devices for Panthera S3 and U3 chairs that the user engages from the seat.
GBP 320.00 per pair (EPC Wheelchairs); no USD price shown
X Anti Tip
Anti-tippers. A pair of anti-tip devices made for the Panthera X wheelchair.
$70.50 standard, $125.50 tension adjustable (Sportaid)
Seat Upholstery
Seat upholstery. Replacement seat sling for Quickie manual wheelchairs, offered as a plain sling or a tension-adjustable version.
$119 standard, $169 tension adjustable (Sportaid)
Seat Upholstery
Seat upholstery. Replacement seat upholstery for Invacare and Top End wheelchairs, supplied with seat rails.
$105 to $278 depending on version (Sportaid)
Back Upholstery
Back upholstery. Replacement back upholstery for Quickie wheelchairs in fold-over or tension-adjustable form.
$377 to $593.30 (Sportaid)
Carbon Fiber Solid Seat Base
Solid seat inserts. Flat carbon fiber seat pan with aluminium mounting hardware that replaces a sling seat on rigid frames.
$132 for 16 in chair; $132 to $183 by size (Therafin)
Drop Seat Insert
Solid seat inserts. Half-inch birch plywood drop seat with pre-drilled holes and T-nuts for building a lowered solid seat.
$75 to $119.50 by size (AliMed)
Wheelchair Board
Solid seat inserts. Thin wooden board that sits on a sling seat to give the cushion a flat, firm base.
Out of stock at source
$614.75 standard, $516.06 bariatric (AliMed)
Adjustable Drop Seat
Solid seat inserts. Molded urethane drop seat that hooks onto the seat rails to lower and angle the seating surface without altering the frame.
Pre-order at source
£95 to £115 ex tax by size (EPC Wheelchairs, UK)
JAY 2 Replacement Cushion Cover
Cushion covers. Replacement cover for the JAY 2 cushion in air-exchange or incontinence fabric.
£160.90 ex tax (EPC Wheelchairs, UK)
Evolution/PSV Cushion Cover
Cushion covers. Replacement stretch cover for the Varilite Evolution PSV cushion in mesh or incontinence fabric.
Pre-order at source
£467.06 ex tax per pair (EPC Wheelchairs, UK)
Slim Style Sideguards
Side guards. Fixed carbon fibre side guards supplied as a pair with fixings for Quickie Helium and Argon chairs.
£76.51 ex tax per guard (EPC Wheelchairs, UK)
Kids Plastic Sideguards
Side guards. Removable child-size plastic side guard that clamps to the frame of most Quickie wheelchairs.
£145 ex tax per side (EPC Wheelchairs, UK)
Sideguard S3/X 24-25 in
Side guards. Side guard with a firm lower section and a soft upper section that folds down under load during transfers.
£465 ex tax (EPC Wheelchairs, UK)
S3 Sideguard Carbon Large Fender
Side guards. Carbon fibre side guard with a large fender over the tyre for Panthera chairs with 24, 25 or 26 inch wheels.
£340 ex tax per pair (EPC Wheelchairs, UK)
Armrest S3 Pair 24 in
Armrest assemblies. Pair of armrests for Panthera chairs that adjust in height and depth without tools.
$69.02 to $76.70 per pair by length (AliMed)
Wheelchair Armrest Cushion
Armrest pads. Pair of nylon-covered foam pads that fasten over existing wheelchair armrests with hook-and-loop straps.
$89.25 (AliMed)
Extended Width Armrest
Armrest pads. Six-inch-wide padded armrest pad that replaces a standard wheelchair arm pad and can be mounted with the extra width facing in or out.
$109 (1800wheelchair.com)
Aluminum Footplate (45298)
Legrests and footplates. Aluminium replacement footplate described as compatible with most Invacare front riggings.
$70, large $75 (Sportaid)
Removable Padded Foot Plate
Legrests and footplates. Foam-topped plastic pad that fastens to a footrest with Velcro to cushion and grip bare feet.
$89.55 per set (WheelchairParts.Net)
Elevating Leg Rest Set, 3 1/8 in Pin Spacing, Aluminum HD Foot Plate
Legrests and footplates. Set of two elevating legrests with heavy-duty aluminium footplates for hangers with 3 1/8 inch pin spacing.
Price on request
Heel Loops (STDS831)
Heel loops and straps. Pair of replacement heel loops for Drive Medical wheelchair footrests.
$60 per pair (Therafin)
Toe Straps
Heel loops and straps. Pair of one-inch hook-and-loop straps that fasten to the footplate and wrap over the front of the shoe.
£10.85 ex tax (EPC Wheelchairs, UK)
Calf Strap
Heel loops and straps. Fifty-millimetre calf strap for RGK wheelchairs in six lengths from 24 to 38 inches.
Pre-order at source
£10.85 ex tax (EPC Wheelchairs, UK)
Foot Strap
Heel loops and straps. Fifty-millimetre foot strap with a D-ring buckle in four lengths.
$106 small to large, $193 X-large, $207 2X-large (Therafin)
Calf Panel, Premium
Calf supports. One-piece neoprene calf panel that wraps onto the footrests with hook-and-loop closures.
Price on request
Aeromesh Calf Supports
Calf supports. Breathable padded calf support made in a narrow strap version and a wider panel version.
$132.98 per pair (AliMed)
Calf Pad Cover
Calf supports. Pair of memory-foam covers that strap over existing wheelchair calf pads.
$272 with pad; $203 hardware without pad (Therafin)
Amputee Support with Pad
Amputee supports. Swing-away residual limb support with a contoured urethane pad that mounts on the footrest hanger.
Pre-order at source
£196.84 ex tax per pair (EPC Wheelchairs, UK)
Bolt On Height Adjustable Push Handles
Push handles and grips. Clamp-on push handles with about 12 inches of height adjustment that lift out of their clamps in seconds.
£170 ex tax per pair (EPC Wheelchairs, UK)
S3 Push Handles Folding Pair
Push handles and grips. Pair of backrest-mounted push handles for the Panthera S3 that fold down when not needed.
Pre-order at source
£147.93 ex tax each (EPC Wheelchairs, UK)
Fold Down Push Handle
Push handles and grips. Push handle with integral backrest tube that folds flat at the press of a button.
$135 per pair (Sportaid)
Wheelchair Bolt-on Push Handles
Push handles and grips. Pair of push handles that bolt to the 3/4 inch rigidizer bar of a rigid-frame wheelchair.
$32 per pair (Sportaid)
Wheelchair Impact Guards
Frame protection. Pair of 12 inch nylon wraps that close with Velcro around frame tubes to protect the finish.
Pre-order at source
£63.80 ex tax per pair (EPC Wheelchairs, UK)
Front Frame Protectors (Pair)
Frame protection. Pair of protectors for the front frame tubes of Kuschall Compact, K-Series and KSL chairs.
£33.71 ex tax each (EPC Wheelchairs, UK)
Frame Protection Cover
Frame protection. Single cover that shields the front frame tube of current Quickie active chairs from scrapes.
$41.25 per 4-pack (AliMed)
Calf Bumper (4-pack)
Frame protection. Small pads that cover the exposed legrest brackets on a wheelchair once the legrests are taken off.
£63.83 ex tax (EPC Wheelchairs, UK)
Ratchet Style Positioning Seat Belt
Pelvic belts. Ratcheting hip strap with a 10 inch pad that fixes to the chair with heavy-duty cable ties.
Price on request
Crutch Holder for Wheelchairs (B6313)
Crutch and cane holders. Polyester holder that hangs from the push handles and carries a pair of forearm or underarm crutches.
Price on request
Cane Holder for Wheelchairs (B6312)
Crutch and cane holders. Slim polyester holder that hangs from a push handle and keeps a cane within reach.
Pre-order at source
£88.81 ex tax (EPC Wheelchairs, UK)
Crutch Holder
Crutch and cane holders. Rear-frame crutch holder for Quickie chairs that requires a tip assist attachment.
£58 ex tax (EPC Wheelchairs, UK)
Crutch Holder (Permobil)
Crutch and cane holders. Two-part crutch clip: a hook on the backrest tube and a magnet on the chassis tube, weighing 46 g per crutch.
$79.99 each, $164.98 pair (monsterscooterparts.com)
UB12350 U1 12V 35Ah AGM
Batteries - AGM. Sealed AGM battery in the U1 case size, sold singly or as a pair for 24 volt scooters and power chairs.
$44.99 (monsterscooterparts.com)
UB12120 12V 12Ah AGM
Batteries - AGM. Compact sealed AGM battery with F2 tabs for travel scooters that run on small 12 Ah packs.
$349.98 per pair (monsterscooterparts.com)
UB12550 22NF 24V pair (2 x 12V 55Ah)
Batteries - AGM. Pair of sealed 22NF AGM batteries with a hardware kit, forming a 24 volt set for larger scooters and power chairs.
$425.95 each (batterystuff.com)
M24 SLD G
Batteries - lead-gel. Sealed gel deep-cycle battery in group 24 size for power wheelchairs with large battery bays.
$74.99 each, $144.99 two-pack (mightymaxbattery.com)
ML35-12
Batteries - AGM. Sealed 12 volt 35 Ah AGM battery in U1 size with nut-and-bolt terminals for mobility and general deep-cycle use.
$154.99 (mightymaxbattery.com)
ML35-12LI U1 LiFePO4
Batteries - lithium. Lithium iron phosphate battery in the U1 footprint, sold as a lighter replacement for sealed lead acid and gel U1 units.
$139.95 (batterywarehouseva.com)
DCM0035
Batteries - AGM. Sealed lead acid deep-cycle battery in the U1 group, listed by the retailer for mobility scooters.
$599.00 (dakotalithium.com)
DL+ 12V 60Ah Dual Purpose
Batteries - lithium. LiFePO4 battery with group 24 compatible dimensions that the maker lists as a replacement for 50 Ah and 55 Ah sealed lead acid wheelchair batteries.
$59.99 (monsterscooterparts.com)
24BC2000T-4 24V 2A XLR
Chargers. Off-board 24 volt, 2 amp three-stage charger with an XLR plug for sealed lead acid scooter and power chair batteries.
$89.99 (monsterscooterparts.com)
24BC5000T-4 24V 5A XLR
Chargers. Off-board 24 volt, 5 amp three-stage charger for AGM and gel batteries, sold as the replacement for the 24BC5000TFG-1.
$99.99 (monsterscooterparts.com)
HP8204B 24V 4A XLR
Chargers. Compact off-board 24 volt, 4 amp charger with XLR plug and three status LEDs for sealed lead acid scooter batteries.
$76.95 (batterystuff.com)
2404SX 24V 2A
Chargers. Small switch-mode 24 volt, 2 amp charger with four-stage charging for gel, AGM and wet lead acid batteries.
$4.99 (monsterscooterparts.com)
Joystick Knob P49-5742 (VSI, VR2, GC, Remote Plus)
Joystick knobs. Black rubber replacement knob for PG Drives VSI, VR2, GC and Remote Plus joysticks and Q-Logic joysticks.
Price on request
Rubber Dome Joystick Handle (PC107)
Joystick knobs. Wide, low, textured rubber dome handle that lets a power chair joystick be driven with the palm.
Price on request
U-Shaped Joystick Handle (PC101 / PC102)
Joystick knobs. Goalpost-style joystick handle with two upright wings that hold the hand in place and can be reshaped in hot water.
Price on request
Grooved Mushroom Joystick Handle (PC110)
Joystick knobs. Polyurethane mushroom-shaped joystick handle with grooved surfaces and a flexible shaft that can be trimmed to six heights.
Price on request
Midline Arms (PC031 / PC032 / PC033)
Joystick mounts. Stainless steel swing-away arms in straight, J and L shapes for mounting a joystick, phone, tablet or communication device at the midline.
$29.99 (monsterscooterparts.com)
GSM80233 1.5 m Joystick Bus Cable
Controller cables. 1.5 metre male-to-male bus cable that links a Dynamic joystick to the power module on a range of power chairs.
$29.99 (monsterscooterparts.com)
XLR Charging Adapter with USB-A and USB-C (F79-8920)
USB charging adapters. Adapter that plugs into the XLR charger port of a scooter or power chair and provides USB-A and USB-C outlets for phones and other devices.
$3.17 (monsterscooterparts.com)
Brake Freewheel Lever and Cap (FRMASMB9628)
Brakes and freewheel levers. Replacement freewheel lever with rubber end cap and hardware for Go-Go Elite Traveller, Ultra X and Travel Pro scooters.
$449.99 per side (monsterscooterparts.com)
Drive Motor for Jazzy Elite 14 and Elite HD (DRVASMB7110011 / DRVASMB7110012)
Motors. Left or right drive motor assembly with gearbox and electro-mechanical brake for Jazzy Elite 14 and Elite HD power chairs.
$198.99 empty, $291.99 with 12 Ah, $319.99 with 15 Ah (monsterscooterparts.com)
Battery Box Assembly PLSASMB2013 (Go-Go Elite Traveller)
Battery boxes. Removable black plastic battery box with handle for the Go-Go Elite Traveller, offered empty or pre-wired with 12 Ah or 15 Ah batteries.
$69.55 per side (monsterscooterparts.com)
Dual Marker Light Fender Assembly (Quantum Q6 Edge 2.0)
Lights and reflectors. Black plastic fender with three front-facing and three rear-facing LEDs for one side of a Quantum Q6 Edge 2.0 power chair.
Pre-order at source
$31.99 (monsterscooterparts.com)
RVQ24YS08-03 30S B502 5K Ohm Throttle Potentiometer
Throttle parts. 5K ohm throttle potentiometer with a 30 mm shaft, used behind the thumb lever on many mobility scooters.
Price on request
Standard Seatback (B1111)
Bags. Single-compartment nylon bag that straps over the seatback of a scooter or wheelchair.
Price on request
Down-in-Front (B3311)
Bags. Small single-pocket bag that buckles to the front of a wheelchair frame under the seat.
Price on request
Armrest Pocket (B2113)
Bags. Slim armrest pouch for keys, wallet, phone and glasses, sized to stay clear of the wheels on a manual chair.
Price on request
Unbreakable Cupholder - Front Grip (A1328)
Cup holders. Soft fabric cup holder with a locking cord that mounts on a front grip and also holds phones or keys.
Price on request
D Tank Holder for Wheelchair (B6321)
Oxygen and IV holders. Polyester carrier for a D-size oxygen cylinder that hangs from wheelchair push handles on adjustable straps.
Price on request
Folding Safety Flag (F1100)
Safety flags. Visibility flag that folds below head height or lifts off, for scooters, manual wheelchairs and power chairs.
Price on request
Weather Chaps (V3122 / V3322 / V3522)
Rain and weather protection. Leg cover with removable fleece lining that slips over shoes and footrests and fastens with a webbing belt.
Price on request
Joystick Cover (V2200)
Rain and weather protection. Nylon cover with a clear plastic top that keeps dust and moisture off a power chair joystick while it stays visible.
Price on request
Cell Phone Holder - Vertical Mount (A2326)
Phone and device mounts. Fabric phone pouch that straps to any vertical tube on a chair, walker or crutch.
Price on request
Standard Powerchair Covers (V1300 series)
Rain and weather protection. Lightweight nylon storage cover for power chairs in five sizes, closed with an elastic drawcord and cord lock.
$47.50 (sportaid.com)
Catch All (SPB-190)
Bags. Nylon net shelf that fastens under a wheelchair seat with hook and loop straps.
$25.99 (sportaid.com)
Water Bottle and Cell Phone Holder (SPG-12289)
Cup holders. Soft wetsuit-type holder with three rotating straps that carries a bottle, a phone and a pen or torch together.
$33.15 (sportaid.com)
Cold Weather Leather Wheelchair Gloves (SPG-8140)
Gloves. Full-finger leather push gloves with 100 gram Thinsulate insulation and a Hipora liner for winter wheeling.
$41.61 (monsterscooterparts.com)
Clamp-On Extra Large Rear View Mirror Assembly (ACCASMB2046)
Mirrors. Clamp-on rear view mirror on a rod for scooter tillers and handlebars from 1/2 to 7/8 inch in diameter.
$7.99 (monsterscooterparts.com)
Universal Grip Umbrella Holder (E41-9925)
Rain and weather protection. Folding umbrella holder with a flexible arm that clamps to round or square tubing on scooters, power chairs and wheelchairs.
$52.99 (monsterscooterparts.com)
Extra Large Insulated Seat Back Bag (S73-8319)
Bags. Large black ripstop nylon seat back bag with insulated lining that buckles onto scooter and power chair seats.
Out of stock at source
$123.49 (rammount.com)
X-Grip Phone Mount for Wheelchair Armrests (RAM-B-238-WCT-2-UN7)
Phone and device mounts. Phone mount kit with a wheelchair track ball base, two socket arms and a spring-loaded X-Grip cradle.
$239.49 (rammount.com)
Tablet Mount for Wheelchairs with Quick Release and Swivel (RAP-AAPR-WCT-114P-18-UN9U)
Phone and device mounts. Track-mounted tablet holder for 9 to 11 inch tablets with a quick-release joint and swivel.
EUR 19 to 59 depending on set (rehadesign.com)
Brella Buddy
Rain and weather protection. Chest-worn umbrella holder that keeps both hands free for pushing, sold alone or with a long-shaft collapsible umbrella.
$251.00 (therafin.com)
18W x 16D Black Tray with EZ Lock Clamps (T31101A)
Trays. Black laminate lap tray, 18 by 16 inches, with pre-installed EZ Lock clamps that grip the armrests.
$21.99 (us.knog.com)
Oi Classic Bell
Bells and horns. Slim wrap-around bar bell in two sizes with a spring-loaded hammer and a stated sound level above 80 dB.
$22.99 (niteize.com)
SpokeLit Rechargeable Wheel Light Disc-O Select (SKLR-07S-R6)
Lights and reflectors. Rechargeable two-LED light that clips onto wheel spokes without tools and offers four colours plus a colour-changing mode.
Price on request
QRT-360 Heavy Duty Wheelchair Retractor
Transport tie-downs. Self-tensioning, self-locking retractor for four-point wheelchair securement in vehicles, crash tested at 30 mph and 20 g.
Out of stock at source
CAD 49.99 (handicup.com)
Black HandiCup Wheelchair Cup Holder
Cup holders. Handled cup holder that slides under the seat cushion without tools and suits users with full or limited hand function.
-schrader-valve-inner-tube-875x1000.JPG)
How to choose
- Note the make, model and year of your chair, plus any serial number, before asking about a part.
- Read sizes off the old part where possible, such as the tire marking or the axle diameter and length.
- Separate comfort upgrades from safety parts, and replace worn brakes, tires and axles first.
- Ask whether fitting needs a technician, because some parts affect stability or the electronics.
Guides for choosing parts & accessories
All guidesHow-to & Maintenance · 8 min read
Tire and caster care in 15 minutes
Soft tires and hair-wrapped casters make every push harder. This short routine keeps both in order and tells you when parts need replacing.
How-to & Maintenance · 8 min read
Choosing a pressure-relief cushion
No cushion type is best for everyone. Learn how air, gel, foam and honeycomb work, then choose with your clinician and look after what you pick.
How-to & Maintenance · 8 min read
How to measure yourself for a wheelchair
A few body measurements, a firm tape and a helper are enough to prepare for a wheelchair order. Here is how to take each one and what it becomes.
Common questions
Are wheelchair parts universal?
Some are, many are not. Tires, tubes and common axle sizes are widely interchangeable, while frame-specific parts such as side guards, footrests and controllers depend on the maker and model. Always check dimensions and compatibility before ordering.
Which wheelchair parts wear out first?
Tires, inner tubes, caster wheels and their bearings, brake shoes, armrest pads and upholstery usually need attention first. On power chairs, batteries are the main consumable.