Price on request
KX07
Hydraulic and pneumatic knees. A waterproof four-bar polycentric knee with hydraulic swing and stance control.
Proteor
Photo could not be loaded
Proteor · Hydraulic and pneumatic knees · PR-027
Proteor Hytrek Single-Axis Hydraulic Prosthetic Knee
The Proteor Hytrek is a single-axis prosthetic knee with hydraulic regulation of stance and swing and a hydraulic brake that works over a wide range. It is weather resistant and made from aluminium, stainless steel and titanium. The standard knee weighs 1,265 g and stands 232 mm tall. A KD variant with a threaded top weighs 1,285 g. Both flex to 120 degrees and carry 150 kg.
- Activity level
- K3 to K4
- Max user weight
- 150 kg (330 lb)
- Knee flexion
- 120 degrees
- Weight
- 1,265 g (standard); 1,285 g (KD)
Proteor Hytrek key features
- Hydraulic control of stance and swing
- Optional manual lock
- Weather resistant
- KD variant with threaded top for knee disarticulation
- 34 mm tube connector at the distal end
- Aluminium, stainless steel and titanium build
Who the Proteor Hytrek suits
For active K3 and K4 users with a transfemoral amputation or knee disarticulation, including heavier users up to 150 kg who walk outdoors in changing weather. A prosthetist selects the standard or KD version and aligns it.
This kind of device is prescribed and fitted by a clinician. An enquiry starts that conversation. It is not a purchase.
Figures for comparing
- Weight
- 1.3 kg (2.9 lb)
- Max user weight
- 150 kg (331 lb)
The same units on every product, converted from the specifications below. Where a source gives two limits, the lower one is shown.
Proteor Hytrek specifications
| Activity level | K3 to K4 |
|---|---|
| Max user weight | 150 kg (330 lb) |
| Knee flexion | 120 degrees |
| Weight | 1,265 g (standard); 1,285 g (KD) |
| Total height | 232 mm (standard); 222 mm (KD) |
| Proximal connector | Pyramid, or threaded top on KD |
| Distal connector | 34 mm tube |
| Materials | Aluminium, stainless steel, titanium |
| L-codes | L5828, L5845, L5850, L5925, L5930 (K4) |
| Maker country | France |
| Price | Quoted on request |
| Brand | Proteor |
| Category | Lower limb - knees, hips and leg systems, Hydraulic and pneumatic knees |
| Catalog ID | PR-027 |
Compared with the source page on 5 October 2026. Details can change, so we confirm them in your quote. Open the source page.
Proteor Hytrek: common questions
What is the weight limit of the Proteor Hytrek?
The Hytrek takes users up to 150 kg, or 330 lb.
Is there a Hytrek for knee disarticulation?
Yes. The KD variant has a threaded top, weighs 1,285 g and has a total height of 222 mm.
Does the Hytrek have a lock?
A manual lock is available as an option.
How to get a quote for the Proteor Hytrek
Add it to your enquiry list
Press Add to enquiry. You can add other products and parts to the same list.
Tell us your country and needs
Send the list with your country, sizes and any options you want. No payment details are asked.
Get a personal reply
You receive availability, a price and delivery options by email, and decide after that.
Similar to the Proteor Hytrek
All Lower limb - knees, hips and leg systemsPrice on request
3R80 Modular Knee Joint
Hydraulic and pneumatic knees. A single-axis knee with rotary hydraulic control of stance and swing.
Price on request
Capital Knee
Hydraulic and pneumatic knees. A single-axis hydraulic knee with swing and stance control and a mode switch.
USD 1,035 (maker's listed price)
All-Terrain Knee
Mechanical knees. A waterproof four-bar mechanical knee with an automatic stance lock and non-hydraulic cadence control.
Price on request
ESK+
Mechanical knees. A knee with weight-activated stance control and adjustable pneumatic swing control.
Goes with this product
Guides for this kind of product
Money & Funding · 8 min read
What a prosthetic leg really costs and who pays
A prosthetic leg is a fitted service, not a boxed product. Here is what the bill is made of and which funding routes to ask about first.