Price on request
Genium (3B1-3)
Microprocessor knees. A microprocessor knee designed to follow a natural gait and handle stairs and obstacles.
WillowWood / Reboocon
Photo could not be loaded
WillowWood / Reboocon · Microprocessor knees · PR-035
Reboocon INTUY Knee Powered Microprocessor Knee
The Reboocon INTUY Knee is a motor-powered microprocessor knee made in the Netherlands and distributed by WillowWood in the USA. Its motor drives both flexion and extension with up to 100 Nm of torque, which helps on stairs, when rising from a chair and on a bike. It weighs 2.5 kg with battery, runs up to two days, and recharges fully in two hours or to 80 percent in one.
- Activity level
- K3 to K4
- Max user weight
- 275 lb (124.74 kg)
- Knee flexion
- 120 degrees
- Weight
- 2.5 kg (5.5 lb) with battery
WillowWood / Reboocon INTUY Knee key features
- Powered flexion and extension, 100 Nm maximum torque
- Assists stair ascent and descent and sit-to-stand
- Extension lock and symmetrical sitting
- Full charge in 2 hours; regenerative charging
- Maximum noise level 50 dB
- Black or silver; 3-year warranty
Who the WillowWood / Reboocon INTUY Knee suits
Aimed at active K3 and K4 transfemoral users up to 275 lb who want the knee itself to lift and extend. It is rated IP45 only with its cover on. Assessment and fitting are done by a prosthetist.
This kind of device is prescribed and fitted by a clinician. An enquiry starts that conversation. It is not a purchase.
Figures for comparing
- Weight
- 2.5 kg (5.5 lb)
- Max user weight
- 124.7 kg (275 lb)
The same units on every product, converted from the specifications below. Where a source gives two limits, the lower one is shown.
WillowWood / Reboocon INTUY Knee specifications
| Activity level | K3 to K4 |
|---|---|
| Max user weight | 275 lb (124.74 kg) |
| Knee flexion | 120 degrees |
| Weight | 2.5 kg (5.5 lb) with battery |
| Build height | 25.5 cm (10.04 in) |
| Max torque | 100 Nm |
| Battery | Up to 2 days; 44 h standby |
| Charge time | 2 h full; 1 h to 80% |
| Water rating | IP45 with cover |
| Warranty | 3 years from fitting |
| Maker country | Netherlands (Reboocon); distributed by WillowWood, USA |
| Price | Quoted on request |
| Brand | WillowWood / Reboocon |
| Category | Lower limb - knees, hips and leg systems, Microprocessor knees |
| Catalog ID | PR-035 |
Compared with the source page on 5 October 2026. Details can change, so we confirm them in your quote. Open the source page.
WillowWood / Reboocon INTUY Knee: common questions
How heavy is the INTUY Knee?
It weighs 2.5 kg, or 5.5 lb, including the battery.
How long does the INTUY Knee take to charge?
A full charge takes two hours and a quick charge to 80 percent takes one. Battery autonomy is up to two days.
What does the INTUY Knee motor help with?
It powers flexion and extension, assisting with stair ascent and descent, sit-to-stand transitions and biking.
How to get a quote for the WillowWood / Reboocon INTUY Knee
Add it to your enquiry list
Press Add to enquiry. You can add other products and parts to the same list.
Tell us your country and needs
Send the list with your country, sizes and any options you want. No payment details are asked.
Get a personal reply
You receive availability, a price and delivery options by email, and decide after that.
Similar to the WillowWood / Reboocon INTUY Knee
All Lower limb - knees, hips and leg systemsPrice on request
Kenevo (3C60)
Microprocessor knees. A microprocessor knee tuned for lower-mobility users, with sit-to-stand support and a wheelchair mode.
Price on request
Power Knee
Microprocessor knees. A motor-powered microprocessor knee that adds active movement.
Goes with this product
Guides for this kind of product
Money & Funding · 8 min read
What a prosthetic leg really costs and who pays
A prosthetic leg is a fitted service, not a boxed product. Here is what the bill is made of and which funding routes to ask about first.