USD 1,405 list price on shop.proteorusa.com (component only; site notes prices may not be current)
RUSH H2O Collection
Waterproof feet. A set of RUSH feet in versions made for use in water.
Fillauer
Photo could not be loaded
Fillauer · Waterproof feet · PR-020
Fillauer AllPro XTS Waterproof Carbon Prosthetic Foot
The Fillauer AllPro XTS is a split-toe carbon prosthetic foot that combines adjustable torsion with vertical shock reduction and carries an IP67 waterproof rating. The torsion unit turns up to 9 degrees each way and can be tuned to the wearer. Sizes run from 22 to 30 cm, the user weight limit reaches 125 kg depending on size, and the unit is field serviceable.
- Sizes
- 22 to 30 cm
- Max user weight
- Up to 125 kg, depending on size
- Water rating
- IP67
- Torsion
- +/-9 degrees, adjustable
Fillauer AllPro XTS key features
- IP67 waterproof rating
- Adjustable torsion of plus or minus 9 degrees
- Vertical shock reduction built in
- Split-toe carbon composite construction
- Field-serviceable design
- Works with the split ProCover cosmesis
Who the Fillauer AllPro XTS suits
A good fit for active users who walk on rough ground or spend time in wet conditions and want rotation and shock taken up below the socket. Size and weight category are selected with a prosthetist.
This kind of device is prescribed and fitted by a clinician. An enquiry starts that conversation. It is not a purchase.
Figures for comparing
- Max user weight
- 125 kg (276 lb). Up to 125 kg depending on foot size; each size has its own weight band (22 cm starts at 45-54 kg)
The same units on every product, converted from the specifications below. Where a source gives two limits, the lower one is shown.
Fillauer AllPro XTS specifications
| Sizes | 22 to 30 cm |
|---|---|
| Max user weight | Up to 125 kg, depending on size |
| Water rating | IP67 |
| Torsion | +/-9 degrees, adjustable |
| Construction | Split-toe carbon composite |
| Warranty | 36 months from fitting |
| Suggested L-codes | L5984, L5987 |
| Maker country | USA |
| Price | Quoted on request |
| Brand | Fillauer |
| Category | Lower limb - feet and ankles, Waterproof feet |
| Catalog ID | PR-020 |
Compared with the source page on 5 October 2026. Details can change, so we confirm them in your quote. Open the source page.
Fillauer AllPro XTS: common questions
Is the Fillauer AllPro XTS waterproof?
Yes. It carries an IP67 rating, so it is rated for immersion.
What weight does the AllPro XTS support?
The limit depends on foot size and reaches 125 kg at the top of the range. Smaller sizes are built for lighter users.
How long is the AllPro XTS warranty?
Fillauer gives 36 months from the date of patient fitting.
How to get a quote for the Fillauer AllPro XTS
Add it to your enquiry list
Press Add to enquiry. You can add other products and parts to the same list.
Tell us your country and needs
Send the list with your country, sizes and any options you want. No payment details are asked.
Get a personal reply
You receive availability, a price and delivery options by email, and decide after that.
Similar to the Fillauer AllPro XTS
All Lower limb - feet and anklesPrice on request
SuperSACH
SACH feet. A simple solid-ankle cushioned-heel foot with an adjustable heel cushion and lightweight keel for lower-mobility walkers.
Price on request
SACH Foot with Titanium Pyramid
SACH feet. A basic SACH foot with a moulded-in titanium pyramid and three interchangeable heel inserts.
Price on request
Triton side flex (1C68)
Dynamic carbon feet. A carbon energy-return foot with added side-to-side flexibility for slopes and uneven ground.
Price on request
Pro-Flex LP
Dynamic carbon feet. A low-profile carbon foot intended to give full-height dynamics where build height is limited.
Goes with this product
Guides for this kind of product
Money & Funding · 8 min read
What a prosthetic leg really costs and who pays
A prosthetic leg is a fitted service, not a boxed product. Here is what the bill is made of and which funding routes to ask about first.