Wheelchair cup holder guide 2026: clamp-on, strap-on, self-leveling and armrest holders compared, tube sizes, cup sizes, prices and warranty
Wheelchair cup holders from Drive, Diestco, Pride, RAM, Vive and Quokka compared: how they attach, tube and cup sizes, prices at three US sellers, warranty and safety.
Contents
- The short answer
- How we compared, and which pages we read
- Wheelchair cup holders model by model: the core table
- Four ways a cup holder attaches to a wheelchair
- Tube diameters: which clamp fits which tube
- Swivel and self-leveling holders
- Cup sizes, insulated holders and big drinks
- Cup holders for manual wheelchairs and transport chairs
- Cup holders for power wheelchairs
- Cup holders for mobility scooters
- Wheelchair cup holder prices on 12 November 2026
- Same holder, different price
- When two pages print different figures
- Warranty and returns, document by document
- Hot drinks, spills and what the pages say about safety
- Transfers, armrests and the chair's own manual
- What FDA files show about cup holders
- Does Medicare or insurance pay for a cup holder?
- Three traps when buying a wheelchair cup holder
- Three composite scenarios
- What to ask before you buy, and how we can help
- Sources and documents
- Common questions
- Sources
The short answer
A wheelchair cup holder is a small holder for a drink that fixes to the chair, so the drink rides with you and both hands stay free to push or drive. This guide compares the wheelchair cup holder models that makers and US sellers list today, model by model: how each one attaches, which tube or armrest it says it fits, which cup sizes it takes, what it costs, and what warranty and return terms come with it. It goes further than our general wheelchair accessories guide, which covers cup holders in one section next to bags, trays and gloves.
Which wheelchair cup holder fits my chair, and what decides it? Mobility Atlas read the pages of Drive Medical, Diestco, Pride Mobility, the Pride Gear store, which sells Pride part numbers, RAM Mounts, Vive, Quokka and HandiCup, three large US sellers and the FDA's files on 12 November 2026. The fit decides first. Clamp-on holders print the tube sizes they grip: Drive's Universal Cup Holder STDS1040S fits tubing from 5/8 to 1 inch, RAM's Tough-Claw version .625 to 1.14 inches, and Vive's clip-on holder up to 1.5 inches. Armrest holders made for one brand print model lists instead: Pride Gear lists 16 Pride models for its KIT2304745. Strap-on holders, such as Diestco's A1323, wrap a strap around the tube. Then the drink: the rigid holders that print a diameter give figures from 2.5 to 3.625 inches, while Diestco's molded holders take up to a 44 oz. beverage. Price comes last; by the first price on each listing, cup holders ran from $5.69 to $95.00.
Three questions settle most choices. What kind of chair is it: a manual chair with exposed tubes, a power chair with padded or molded armrests, or a scooter with a tiller and handlebars? Where should the drink sit: at the front of the armrest, beside your hip, or behind your hand on the push handle? And what do you drink from: a can, a 20 oz. bottle, a travel mug with a handle, or a large insulated tumbler? Each holder's page answers one or two of these and almost never all three, so the sections below line the answers up side by side.
A cup holder is not a clinical device in the way a cushion or a positioning belt is, but it sits where your hands and arms work. If you move from the chair to a bed or a car, the holder should not be in the path of your hand or your hip. Where you place it, and whether an under-cushion holder is right for you, is worth a word with your occupational therapist or seating clinician; HandiCup's own page asks users to consult with their OTs. Mobility Atlas earns a fee or margin when you order through us; the comparison below uses only the makers' and sellers' published pages, read on 12 November 2026.
How we compared, and which pages we read
On 12 November 2026 we opened every page named in this guide in a browser and saved its text, with the address and the date, before writing a word; the exceptions are the CMS documents and FDA's MAUDE page, which were read and saved on 9 November 2026. We did not use review sites, forums or search-engine summaries as sources. Where a figure appears in this guide it comes from one of those saved pages, and where we did arithmetic (a price gap, a range, a conversion from inches to millimeters) the result was computed by a script from the saved text.
The makers' pages we read were Drive Medical's product pages for the Universal Cup Holder STDS1040S, the Nitro Cup Holder 10266-CH and the Nitro Universal Cup Holder RTL102662-CUP, plus the owner's sheet that Drive links for STDS1040S; Diestco's cup holder category, its six cup holder pages and its policies page; Pride Mobility's Jazzy cup holder page and its Go Chair owner's manual; the Pride Gear store's cup holder search and product pages; RAM Mounts' Level Cup pages, its Universal Wheelchair Ball Base page, its search page and its warranty page; Vive's Cup Holder Attachment page, its guarantee policy and its shipping and return policy; Quokka's CH-1 cup holder and AD-1 adapter pages; and HandiCup's product page. We also looked for a cup holder on Rehadesign's store: its front page listed gloves, tire covers, push rim covers, trays, lights and an umbrella holder, but no cup holder.
For prices we read three large US sellers on the same day: 1800wheelchair's cup holder category and the product pages behind it, the first page of Walmart's results for "wheelchair cup holder", and SpinLife's search for "cup holder" with two of its product pages. We also read Adaptive Mall's page for the Quokka cup holder. For rules and safety records we read the FDA's classification entries for wheelchair accessories, the regulation 21 CFR 890.3910, an openFDA word search of device reports and recalls, and FDA's page about the MAUDE database. For Medicare we used the coverage rule for wheelchair options and accessories, LCD L33792, and its policy article A52504, as saved on 9 November 2026.
What we did not do: we did not buy, fit or test any holder, and we did not ask any maker or seller a question. Where two pages give different figures for the same product we give both and say which page printed which, rather than choosing one. Where a page gives no figure, we say so instead of filling the gap.
Wheelchair cup holders model by model: the core table
The table lists every cup holder we found a maker's page or a named seller's page for, with the attachment, the fit and the drink size each page prints. Prices in the last column are US dollar prices as listed on the seller's page named, on 12 November 2026, before tax and shipping. A dash means the page we read printed nothing for that column.
| Holder (maker, part number) | How it attaches | Fit printed | Drink size printed | Price, seller |
|---|---|---|---|---|
| Drive Universal Cup Holder STDS1040S | Clamp with knob, swivel | Tubing 5/8 to 1 in | Cup holder 3 in wide (1800wheelchair); overall 3.5 x 4 in (Drive) | $14.97 Walmart (tile, no item number); $14 SpinLife; $23 1800wheelchair |
| Drive Cup Holder AZ0060 | Armrest | Most scooters and power chairs | - | $48 1800wheelchair |
| Drive Nitro Universal RTL102662-CUP | As printed by Drive (see text) | Nitro Sprint, Nitro Cruise and others | Cups, bottles, travel mugs | - |
| Diestco A1322 molded | Padded armrest | Most scooters and power chairs | Up to 44 oz. | $49 SpinLife (A132XX) |
| Diestco A1323 molded | Hook and loop strap | Any exposed tubing | Up to 44 oz. | - |
| Diestco A1324 molded | Mount, push button | Molded armrests | Up to 44 oz. | - |
| Diestco A1325 (1800wheelchair) | Luggie armrest hardware | Freerider Luggie | Up to 44 oz. | $36 1800wheelchair |
| Diestco A1326, A1327, A1328 fabric | Grip, cord lock | Vertical, horizontal or front | 1 in circumference to 32 oz bottle | $44 1800wheelchair; $45 SpinLife |
| Pride Cup Holder KIT2304745 | Either armrest | 16 Pride models listed | - | $32 Pride Gear |
| Pride B, C, D Style cup holders | Scooter armrest | Model lists per style | - | $32 to $42 Pride Gear |
| Pride Jazzy Carbon Mesh ACC2304855 | Armrest | Jazzy Carbon | - | $24 Pride Gear; $24 SpinLife |
| Pride Quantum Tubular Arm ACCASMB2634 | Clamp-on | Quantum chairs, tubular arms | - (weight capacity 3 lbs) | $85 SpinLife |
| RAM Level Cup 16oz with Tough-Claw | Tool-free claw, self-leveling | Clamp .625 to 1.14 in | 2.5 to 3.5 in (ball-version page); 12 to 16 oz | $40.49 RAM |
| RAM Level Cup XL with Tough-Claw | Tool-free claw, self-leveling | Clamp .625 to 1.14 in | 12 to 32 oz | $64.99 RAM |
| SnapIt W001C wheelchair and walker | Bracket on round tube | Tubing listed in two ways | Cans and 20 oz. bottles | $29 1800wheelchair |
| SnapIt W001CA powerchair | Slides on handrest | Pride, others possible | Cans and 20 oz. bottles | $29 1800wheelchair |
| Vive Cup Holder Attachment MOB1024GB | Clamp, swivel base | 1/8 to 1.5 in | Up to 3 in across | $14.99 Vive (current price) |
| Quokka Cupholder CH-1 | AD-1 or AD-2 adapter | Any tube shape (AD-1 straps) | Bottle up to 7.6 cm | $69.95 Adaptive Mall (with AD-1) |
| HandiCup | Slides under seat cushion | All power and manual chairs | Travel mugs, coffee cups | - |
Read the table as a map, not a ranking. The cheapest holder is not the best one if it cannot grip your tube, and the dearest is not better if it will not take your mug. Two lines in the table carry a figure that differs between pages: the size of Drive's STDS1040S and the size of Diestco's molded holder. Both are explained in the section on figures that disagree.
Many more holders are sold without a maker's name that we could trace. On the first page of Walmart's results, for example, most tiles name a store brand or no brand at all. We list those prices in the price section, but we do not tie any of them to a maker, and we do not put them in this table, because a tile title is not a spec sheet.
Four ways a cup holder attaches to a wheelchair
Most holders on the pages we read use one of four ways to stay on the chair; a few use a built-in accessory mount (Drive's Nitro Universal holder, for the products Drive lists) or a RAM ball and arm. Knowing which one you need is the fastest way to cut a list of fifty products down to five.
Clamp-on holders
A clamp-on holder closes a jaw around a round tube and is tightened with a knob or a lever. Drive's sheet for STDS1040S describes it step by step: place the U-shaped section around the pole, remove the rubber insert if necessary to fit the tubing, thread the screw and fasten it with the tightening knob, then swivel the cup and tighten again. The same sheet adds, in capitals, "DO NOT over tighten." Vive's holder uses a twist knob and, its page says, a clamp "lined with textured nonslip material"
. RAM's Tough-Claw is a tool-free claw that RAM's page says works "on round, square, odd shaped rails and bars and flat surfaces"
.
Clamp-on holders suit manual chairs, transport chairs and any power chair with an exposed round tube, such as a tubular armrest. Their limit is the tube size printed on the page, covered in the next section.
Strap-on holders
A strap-on holder wraps a strap around the tube instead of clamping it. Diestco's A1323 "Mounts to any vertical or horizontal exposed tubing with a hook and loop strap,"
its page says, and Quokka's AD-1 adapter comes with stainless steel straps; Quokka's page says it "fits any type of tube (round, oval, rectangular, etc.)"
. In our view, a strap mount is the safer choice when your tube is not round. Diestco's fabric Unbreakable Cupholders come in vertical, horizontal and front grip versions; Diestco's pages do not say how the grip attaches, and Diestco links a mounting video rather than describing the mount.
Armrest holders made for one brand
Power chairs and scooters often have padded or molded armrests with no exposed tube. Here the holder bolts to hardware on or under the armrest. Pride's KIT2304745, its Pride Gear page says, "attaches conveniently to either arm of your mobility scooter or power wheelchair"
. Diestco's A1324 is for molded armrests, and its page says the "Cupholder basket is connected to your cupholder mount by a push button for easy on and off."
Diestco's A1325, on 1800wheelchair's page, "mounts to the existing hardware underneath the Luggie Mobility Scooter Armrest."
These holders print model lists, not tube sizes.
Under-cushion holders
HandiCup takes another route: its page says you "slide the handle under the seat cushion"
and that it attaches to all power and manual chairs with no tools. It needs no tube at all, which suits chairs with nowhere to clamp. But anything that goes under a cushion changes what you sit on, and HandiCup's page carries the note: "users should consult with their OTs or other healthcare professionals to make sure the product is suitable to their needs and safe for their use."
In our view that advice is right for anyone who sits on a pressure-relieving cushion; our wheelchair cushion guide explains why the cushion is a clinical choice.
Tube diameters: which clamp fits which tube
If you choose a clamp-on holder, measure the tube where you want the holder before you order. A tape measure around the tube gives the circumference; divide it by 3.14 for the diameter, or use calipers if you have them. Then compare with the range each page prints. We converted each printed range to millimeters by script, because some chairs list their tubes in metric.
| Holder | Tube range as printed | In millimeters (our conversion) | Where printed |
|---|---|---|---|
| Drive STDS1040S | 5/8 in to 1 in | 15.9 to 25.4 mm | Drive page; 1800wheelchair |
| RAM Level Cup with Tough-Claw (16oz and XL) | .625 to 1.14 in diameter | 15.9 to 29.0 mm | RAM pages |
| Vive Cup Holder Attachment | 1/8 in to 1.5 in | 3.2 to 38.1 mm | Vive page |
| SnapIt W001C (description) | 7/8, 1, 1 1/8 and 1.25 in | 22.2, 25.4, 28.6 and 31.8 mm | 1800wheelchair |
| SnapIt W001C (spec table) | .75, 7/8, 1, 1 1/8 in | 19.1, 22.2, 25.4 and 28.6 mm | 1800wheelchair |
| Diestco A1323 | Any exposed tubing (strap) | - | Diestco page |
| Quokka AD-1 | Any tube shape (straps) | - | Quokka page |
| RAM Universal Wheelchair Ball Base | Armrest and seat tracks | - | RAM page |
Three things stand out. First, the ranges overlap but do not match: a 1-inch tube fits Drive's, RAM's, Vive's and SnapIt's holders by their pages, while a 1.25-inch tube is inside Vive's printed range and SnapIt's description but outside Drive's and the RAM Tough-Claw's printed clamp range. Second, Drive's range depends on a part: the page says a "Special clamp insert can be added or removed as necessary to accommodate different size tubing,"
so, in our reading, keep the rubber insert if your tube is at the small end. Third, SnapIt's listing on 1800wheelchair prints two different lists of tube sizes for the same W001C: the description names 7/8, 1, 1 1/8 and 1.25 inches, and the specification table names .75, 7/8, 1 and 1 1/8 inches. Plan on the sizes both lists share, 7/8 to 1 1/8 inches, until SnapIt or the seller confirms the others in writing.
RAM's XL page has a similar wrinkle. Its overview says the Tough-Claw can attach to any surface from flat through a 1.5-inch railing, while its specification block prints a clamp range of .625 to 1.14 inches. If your tube is between 1.14 and 1.5 inches, ask RAM which figure applies before you buy.
Two more cautions. A clamp grips a round tube best; on an oval or flat tube a strap mount or an armrest holder may hold better, and Vive's page says its clamp also holds on flat surfaces. And, in our view, a tube that carries something else, such as a brake lever, a backrest release or a folding hinge, is not the place for a clamp. Your chair's manual shows which parts move; leave those clear.
Swivel and self-leveling holders
A plain holder keeps the cup at the angle of the tube. If the tube slopes, the cup slopes too, and on a manual chair the push-handle tubes and the front frame tubes are rarely level. Two designs deal with this.
A swivel holder lets you turn the cup on its clamp and lock it level. Drive's own page for STDS1040S now says: "New clamp allows cup holder to swivel to keep contents level"
, and its item name reads "Cup Holder, Swivel". The sheet's last step is to swivel the cup to the desired angle and then tighten the knob. Vive's page says its holder "features a swivel base for use on angled tubing"
. Triumph's Prestige cup holder, on 1800wheelchair, has a "360-degree swivel design" and, the listing says, "Fits various mobility aids and rollators."
Once set, a swivel holder stays at that angle; it does not follow the chair's movement.
A self-leveling holder hangs the cup on pivots so it swings level by itself as the chair tips. RAM's Level Cup is the one we found with a maker's page: RAM calls it a "self-leveling, gyroscopic cup holder"
with two pivot points and says it is compatible with "cups, cans, bottles, and mugs"
from 2.5 to 3.5 inches in diameter. RAM sells it in several kits, among them with a ball for its own arms and bases (RAM-B-132BU, $26.99), with the Tough-Claw clamp (RAM-B-132-400U, $40.49), and as a larger XL for 12 to 32 oz drinks with the Tough-Claw (RAP-B-417-400U, $64.99); the first page of its search results also lists drill-down, strap-clamp and reservoir-base kits, 7 Level Cup kits on that page (the search reported 116 results over 5 pages; we read only the first). 1800wheelchair lists a "Self-Leveling Drink Cup Holder"
under the RAM brand at $95, with the same 2.5 to 3.5 inch range in its description; the listing gives SKU TAGHCUP and does not print a RAM part number, so we cannot say which RAM kit it is.
RAM's pages print a load: the 16oz Level Cup with ball and the XL with Tough-Claw both say "Standard Use: 2 lbs" and "Heavy-Duty Use: 1 lb". By our arithmetic, 32 fl oz of water weighs about 2.1 lb, above RAM's 2 lb standard-use figure and twice its 1 lb heavy-duty figure, before the cup itself; even 16 fl oz is about 1.04 lb. RAM does not explain the difference between the two uses on these pages, so ask RAM in writing which figure applies on a wheelchair before you carry a full large drink. The RAM 16oz Level Cup page names motorcycles, ATVs, big rigs and boats; the Tough-Claw kit page names motorcycles, kayaks and boats, bicycles, wheelchairs and medical carts.
In our view a self-leveling holder makes the most sense on a power chair or scooter that tilts, climbs ramps or crosses rough ground, and on a manual chair where the only free tube is steeply angled. A swivel holder set once is simpler and lighter for a chair that mostly stays on level floors.
Cup sizes, insulated holders and big drinks
Holders print drink sizes in three different ways: as a diameter, as a volume in ounces, or as a kind of drink. That makes comparison awkward, so the table puts them together. Where a page gives millimeters or centimeters we add inches by script.
| Holder | What the page prints | Seller or maker page |
|---|---|---|
| Drive STDS1040S | Cup holder width 3 in, height 3 in | 1800wheelchair |
| Drive STDS1040S | Dimensions 3.5 in (W) x 4 in (L) | Drive |
| RAM Level Cup 16oz | 2.5 to 3.5 in across; 12 to 16 oz | RAM |
| RAM Level Cup XL | 12 to 32 oz; adjustable bottom for tall cups | RAM |
| Self-Leveling Drink Cup Holder (RAM brand) | 2.5 to 3.5 in across | 1800wheelchair |
| Vive MOB1024GB | Up to 3 in across; base 2.5 to 3 in | Vive |
| SnapIt W001C, W001CA, W001CHB | Internal diameter 2.9 in; cans and 20 oz. bottles | 1800wheelchair |
| SnapIt W001KA, W001KHB (insulated) | Internal diameter 3.625 in (92.1 mm); cans with insulated sleeves, mugs | 1800wheelchair |
| Sammons Preston 114309 | Containers 2.5 to 3 in across | 1800wheelchair |
| Diestco A1322, A1323, A1324 | Up to a 44 oz. beverage; slot for a mug handle | Diestco |
| Diestco A1326, A1327, A1328 (fabric) | 1 in circumference up to a 32oz. Gatorade bottle | Diestco |
| Quokka CH-1 | 9 cm high, bottle up to 7.6 cm (2.99 in) | Quokka |
| Pride B, C, D Style | 162 x 114 x 108 mm opened (6.38 x 4.49 x 4.25 in) | Pride Gear |
Insulated holders here means holders sized for a can in an insulated sleeve, not holders that keep a drink hot or cold themselves. SnapIt's insulated versions are wider inside, 3.625 inches against 2.9 for its standard ones, and the scooter version is described as for "mugs or drinks with insulated sleeves"
. 1800wheelchair's category page says "our insulated options can even ensure that hot & cold liquids maintain their temperature"
; none of the product pages behind it that we read prints a temperature figure or a test, so in our reading the insulation is the sleeve or mug you bring, not the holder.
Large tumblers are the hardest drinks to carry. Of the rigid holders, Diestco's molded holders print the largest volume, up to 44 oz., with a slot for a mug handle, and RAM's XL prints 32 oz. with an adjustable bottom. The fabric Diestco holders take a 32 oz bottle and close with a cord lock that, Diestco's page says, "ensures drink will remain secure and upright."
Quokka's CH-1 has built-in springs, its page says, and takes a bottle up to 7.6 cm across, which is just under 3 inches by our conversion. If you carry a handled mug, look for a slot (Diestco) or a holder open on one side; a closed ring will not take the handle.
Measure the drink you actually carry, across its widest point and its base, and compare with the printed figure. A bottle that tapers may sit in a holder that is narrower than its widest point, and a wide-bottomed travel mug may not.
Cup holders for manual wheelchairs and transport chairs
On a manual chair the usual places for a holder are the side frame tube below the armrest, the front frame tube near the knee, and the push-handle tubes at the back. The back is out of reach for most people who push themselves, so a holder there is mainly for a companion who pushes the chair. The side and front tubes are within reach, but they are also where your hands go during a push and where your body passes during a sideways transfer.
For an exposed round tube, the clamp-on holders with a printed range are the simplest choice. Drive's STDS1040S page names "transport chairs/wheelchairs"
among the frames it attaches to, with tubing from 5/8 to 1 inch. SnapIt's W001C on 1800wheelchair is the "Wheelchair and Walker Cup and Bottle Holder"
with a "universal mounting bracket with hardware"
for round tubing, and is listed as "Made in the U.S." at $29. Vive's page lists rollators, walkers, knee scooters, bikes, power scooters and strollers in its features, and its FAQ answers that the holder suits "walkers, rollators, hybrid transport chairs and wheelchairs"
.
For a tube that is not round, or for a rigid chair whose frame has few straight lengths, strap mounts are the main option on the pages we read. Quokka's AD-1 adapter, its page says, is "Suitable for manual wheelchairs (primary), rollators and some power wheelchairs"
and is "Preferably mounted behind the front tube."
The CH-1 cup holder slides onto that adapter; Adaptive Mall's page says it is "locked using the KLICKfix system lever"
and that the cup holder and Quokka's bags are interchangeable on the same mount. Quokka's own store printed the CH-1 at EUR 29.95 and the AD-1 at EUR 19.95, tax included, which is EUR 49.90 for the pair by our addition; Adaptive Mall, a US seller, listed the cup holder with the AD-1 kit at a "Sale Price" of $69.95. Diestco's A1323 uses a hook and loop strap on "any vertical or horizontal exposed tubing"
.
Some transport chairs come with a holder: three FDA reports we read, described in the FDA section below, mention a cup holder on the same Medline 19-inch transport chair, listed in three colors, and Drive's Nitro Universal Cup Holder RTL102662-CUP: Drive's page says it "Fits on Nitro Sprint Rollators, Nitro 3-Wheel Rollator, Nitro Cruise Wheelchair, Nitro Neuro Upright Walker, and MD by Drive Air-Go Walker with built-in accessory mount"
; the page does not say how it attaches to each. Drive's Nitro Cup Holder 10266-CH, in contrast, says it "Fits all Nitro models" and is filed under rollator accessories; the page does not name a wheelchair, so we do not claim it fits one. Our transport wheelchair guide compares those chairs themselves.
If your chair has no free tube at all, HandiCup's under-cushion design is the one under-cushion option we found on a maker's page; Mobility Atlas's catalog lists it as 28 by 10 by 12 centimeters, the same size the maker's page prints. Sportaid's Water Bottle and Cell Phone Holder, also in our catalog, is a soft holder with three rotating hook and loop straps. Ask the seller how either one attaches to your exact chair before ordering.
Cup holders for power wheelchairs
Power chairs mostly have padded or molded armrests, a joystick on one side and sometimes an armrest-mounted rail. Pride's Jazzy cup holder page describes its holder plainly: "Our power wheelchair cup holder attaches right to your motorized wheelchair, freeing up your hands to drive your electric wheelchair."
The same page adds a note at its foot: "Not all accessories are available for all products. Please speak with your Provider for details and availability."
Pride's store answers part of that question with model lists. The Pride Cup Holder KIT2304745, at $32, "Works on the following models,"
and the list names 16: 12 Pride power chairs by our grouping (Go Chair, Go Chair MED, Jazzy 1450, Jazzy 600 ES, Jazzy Air MED, Jazzy Elite 14, Elite ES and Elite HD, Jazzy EVO 613, EVO 614 and EVO 614HD, and Jazzy Select) and 4 scooters (Maxima 3-wheel and 4-wheel, Pursuit 2 and PX4). The Jazzy Carbon has its own Jazzy Carbon Mesh Cup Holder, ACC2304855, at $24, listed for the Jazzy Carbon only. If your chair is not on a list, the list does not say the holder fits it; ask Pride or the dealer.
For Quantum chairs, which are Pride's complex rehab line, SpinLife lists two Pride holders. The Quantum Tubular Arm Cup Holder ACCASMB2634, at $85, is "Engineered specifically for Pride Quantum power chairs with tubular armrests,"
with a printed weight capacity of 3 lbs. The Quantum Chair Cup Holder with Tru-Balance 3, ACC125003, at $49, is "Model Specific (Not Universal)"
and compatible with "most Tru-Balance 3 seats with Version 3 flip-back armrests only"
, the listing says.
For non-Pride power chairs with seat or armrest tracks, RAM's Universal Wheelchair Ball Base RAM-B-238-WCT, at $24.99, carries a hardware pack that, RAM's page says, "accommodates the armrest and seat tracks on most major wheelchair brands, including Invacare, Permobil, and Quickie."
A Level Cup with a ball can then be joined to it with a RAM socket arm. That is three parts from one maker, chosen to your chair; the RAM page prints the base's load as 2 lbs in standard use and 1 lb in heavy-duty use.
SnapIt's powerchair holders on 1800wheelchair slide onto the handrest and offer a "Model Choice" of Merit, Pride, Dalton, Primechair, Rascal Scooter, Golden, Invacare Tube and Invacare U. The description of each says it is guaranteed only on Pride power chairs and "may be compatible with other manufacturers chairs."
Diestco's A1322 is for "most scooters/powerchairs w/padded armrests"
and its A1324 for molded armrests. Drive's AZ0060 Cup Holder, on 1800wheelchair, "Fits most scooters and power wheelchairs"
and weighs 0.3 lb.
Walmart's first results page carried 6 cup holder tiles whose titles name a Pride scooter, a Jazzy or Permobil chair or a Nitro rollator, such as a "3-in-1 Cup Holder Compatible with Permobil Power Wheelchairs with UniTrack Armrest Rails". These tiles name no maker that we could check, so in our reading the model name in a title is a seller's claim, not a maker's fit list. For more about the chairs themselves, see our Jazzy guide and Pride Mobility guide.
Cup holders for mobility scooters
Scooters give two places for a holder: the armrest, beside the seat, and the tiller handlebar, in front of you. Pride's scooter holders go on the armrest and come in three styles. Pride Gear lists the B, C and D Style cup holders with the same printed size, 105 by 105 by 74 mm folded and 162 by 114 by 108 mm opened, and a weight of 0.31 kg, about 0.68 lb by our conversion. What differs is the model list.
| Pride Gear part | Price | Models listed (count) | Examples from the list |
|---|---|---|---|
| B Style ACCASMB2287 | $32.00 | 9 | Maxima, Victory 9, Victory 10, Victory 10.2, Victory LX Sport |
| C Style ACCASMB2288 | $32.00 | 15 | Go Go Elite Traveller, Go Go Sport, Go Go Ultra X, Victory, Zero Turn |
| D Style ACC120041 | $42.00 | 2 | Revo 2 (3-wheel), Revo 2 (4-wheel) |
| B, C or D Style Scooter Accessory Kit | $140.00 | Same lists as the style | Cup holder, small saddle bag, rear basket |
Some models appear on more than one list: the Victory 9, 10 and 10.2 are listed for both the B and the C Style, so the style depends on more than the model name; ask the dealer which style matches your armrest. Each accessory kit contains a cup holder, the Small Saddle Bag DWR1020D010 and the Rear Basket ACCBSKT1010, at $140, which is $108 more than the B or C cup holder alone by our subtraction. SpinLife's search results page lists the B Style ACCASMB2287 as "Cup Holder for Pride Scooters and Power Chairs"
that "Fits most Pride scooters and power wheelchairs,"
a wider claim than Pride Gear's own list of 9 scooter models; plan on Pride Gear's list.
For the tiller, SnapIt's Scooter Can and Bottle Holder, on 1800wheelchair at $25, "attaches to the scooter handle bars,"
and its insulated version, at $29, includes a bracket "for attachment to the handlebar grip."
Diestco's A1325 is made for the Freerider Luggie and mounts under its armrest, 1800wheelchair's page says. On a folding travel scooter, check that the holder folds with the scooter or comes off quickly; Pride Gear prints a collapsed and an opened size for its styles, and Quokka's and Diestco's A1324 holders come off their mounts. Our travel mobility scooter guide covers the scooters.
A holder on the tiller sits in front of your hands and near the controls. In our view, place it where it cannot press a lever or hide a display, and where a spill would not run onto the throttle or the key. Pride's Go Chair manual, written for a travel power chair rather than a scooter, warns that you "should keep electrical connections away from sources of dampness"
; the same care applies to any electric mobility device.
Wheelchair cup holder prices on 12 November 2026
How much does a wheelchair cup holder cost in the US? Mobility Atlas read the listings of three large US sellers, the Pride Gear store, which sells Pride part numbers, RAM Mounts, Vive and Adaptive Mall on 12 November 2026. On the first page of Walmart's results for "wheelchair cup holder", 50 cup, drink and bottle holder tiles ran from $5.69 to $44.95, and 39 of them were under $15. On 1800wheelchair's cup holder category, 14 drink holders ran from $23.00 for Drive's Universal Cup Holder to $95.00 for a self-leveling holder. SpinLife's 12 results ran from $14.00 to $85.00, topped by a Pride Quantum holder. Pride Gear listed its cup holders at $24 to $42, RAM 7 Level Cup kits on the first page of its search results at $26.99 to $79.99, and Vive its clip-on holder at $14.99. These are listed prices before tax and shipping. The cheapest tiles were mostly unbranded clip-on holders also sold for strollers and bikes.
| Seller (US) | What we counted | Lines | Range as listed |
|---|---|---|---|
| Walmart | First results page, cup, drink or bottle holder tiles, trays excluded, duplicates dropped | 50 | $5.69 to $44.95 |
| 1800wheelchair | Cup holder category, first load (20 of 21 results), phone-only holders excluded | 14 | $23.00 to $95.00 |
| SpinLife | Search for cup holder, all results, current price | 12 | $14.00 to $85.00 |
| Pride Gear | Cup holders sold alone | 5 | $24.00 to $42.00 |
| RAM Mounts | Level Cup kits on the first page of RAM's search results | 7 | $26.99 to $79.99 |
How we counted. On Walmart we took every tile on the first results page whose title contains cup, drink, bottle holder or beverage, used the first price printed (the "Now" price where a tile shows one), dropped repeated titles and left out lap trays with cup holders; the page also showed seat cushions and armrest pads, which are not cup holders and were left out. The search reported 928 results in all; we read only the first page. On 1800wheelchair the category reported 21 results; we counted the 20 priced tiles shown on the first load and left out the 6 that hold only a phone; the combination phone and drink holder stays in. On SpinLife we used the current price on each of the 12 results; 7 tiles also showed a higher price struck through, which we do not use.
Prices differ by seller, by country, by sales period and by whether a funding scheme or a dealer is involved, so treat these figures as a snapshot of US listings on one day. Several Walmart tiles carried a "Was" price or a Black Friday label on 12 November 2026. Tiles that print "+ $0.01 shipping", "+ $1.49 shipping" or "+ $1.99 shipping" are counted at the item price only. Some tiles are two-packs, so a low tile price may cover two holders.
Same holder, different price
The same part number can carry very different prices on the same day. Where the seller prints the maker's part number, or the listing names the maker and the product clearly, we compared them.
| Item | Seller and listed price | Gap (our subtraction) |
|---|---|---|
| Drive STDS1040S | Walmart $14.97 (tile, no item number); SpinLife $14; 1800wheelchair $23 | Up to $9.00 |
| Pride B Style ACCASMB2287 | Pride Gear $32.00; SpinLife $49 | $17.00 |
| Pride Jazzy Carbon Mesh ACC2304855 | Pride Gear $24.00; SpinLife $24 | None |
| Diestco fabric front grip A1328 | SpinLife $45 (struck $49) | - |
| RAM Level Cup 16oz, ball or Tough-Claw | RAM $26.99 or $40.49 | $13.50 for the claw kit |
The Walmart tile for Drive's holder is titled Drive Medical Universal Cup Holder, 3 inches wide, and prints no item number, so we take it to be the same product only on the strength of the name and the width; check against Drive's item number STDS1040S before you order. SpinLife's tile for the same product prints "Model No. STDS1040S", and 1800wheelchair's page prints "Sku: STDS1040S". The gap between 1800wheelchair and Walmart was $8.03 by our subtraction.
For Pride's B Style, SpinLife printed a struck $100 above its $49, while Pride's own store listed $32; in our reading the struck figure tells you nothing about what the holder is worth. For RAM, the price steps are about parts: the ball-only Level Cup needs a RAM arm and base you may not own, while the Tough-Claw kit clamps straight on. The XL with Tough-Claw cost $24.50 more than the 16oz with Tough-Claw on RAM's pages.
Shipping and returns change the real price too. A $14 holder with a paid return label and a restocking fee can cost more to send back than to keep. The warranty and returns section below sets out each seller's terms.
When two pages print different figures
Three products in this guide carry figures that disagree between pages. We give both and tell you which to plan on until the maker confirms in writing.
Drive STDS1040S size. Drive's own page prints dimensions of 3.5 inches wide by 4 inches long in its specification tab. 1800wheelchair's listing prints a cup holder width of 3 inches and a height of 3 inches, and Walmart's tile calls it 3 inches wide. If your drink is between 3 and 3.5 inches across, plan on the smaller figure, 3 inches, until Drive confirms the inside size of the cup.
Drive STDS1040S warranty. The English text of Drive's sheet says the product "is warranted to be free of defects in materials and workmanship for one year of the original consumer purchaser,"
and 1800wheelchair's listing says "One-year limited warranty"
. The Spanish text on the same sheet says "cinco años", five years, in its body, while a label at the foot of the same page says one year ("garantía limitada por 1 año"
). Plan on one year, the shorter term and the one both English documents print, and ask Drive in writing if the longer term matters to you.
Diestco molded cup holder size. Diestco's own pages print "Dimensions: 3-1/2″" for the A1322, A1323 and A1324. SpinLife's page for the Diestco A132XX prints dimensions of 3.15 inches, a difference of 0.35 inch by our subtraction. Neither page says whether the figure is the inside or the outside diameter. Plan on 3.15 inches until Diestco confirms.
SnapIt W001C tube sizes and RAM's Tough-Claw range also differ within their own pages, as explained in the section on tube diameters. In each case the safer plan is the narrower range.
Sellers also list Diestco numbers that Diestco's own cup holder pages do not show: 1800wheelchair lists A1325 for a "Diestco Cupholder" for the Freerider Luggie and A132 for a Diestco "Wheelchair Cup Holder" that attaches to the arm, and SpinLife lists A132XX with a model choice. Quote the full part number from the maker's page when you order, and ask the seller to confirm it.
Warranty and returns, document by document
Warranty terms belong to the document that prints them. The table sets out each one as printed; the paragraphs below quote the lines that matter most.
| Document | Warranty as printed | Returns as printed |
|---|---|---|
| Drive STDS1040S sheet | 1 year limited (English text) | - |
| Diestco policies page | 6 months after purchase | Within 10 days of delivery; no restocking fee |
| RAM warranty page; product pages (returns) | Limited lifetime; wear items excluded | 30 days, no restocking fee |
| Vive product and policy pages | One year guarantee (product page) | 30-day return window |
| 1800wheelchair returns | - | 30 days; 10% to 30% restocking fee |
| SpinLife, Quantum Tubular Arm | No Warranty (as printed) | - |
| SpinLife, Diestco A132XX | 6 Month Warranty | - |
| Pride Gear product pages | Not printed | Not printed |
Drive. Drive's sheet says: "This warranty does not cover device failure due to owner misuse or negligence, or normal wear and tear."
It also excludes "non-durable components, such as rubber accessories, casters, and grips,"
and tells owners with a question to contact an authorized Drive dealer. In our reading, the clamp's rubber insert may count as a rubber accessory under that wording; ask Drive before you rely on the warranty for it.
Diestco. Diestco's policies page says: "The Manufacturer’s Warranty on all products is valid for the duration of 6 months after purchase of the product."
Diestco repairs or replaces at its discretion. For returns, Diestco must receive the product "within 10 days following the date of delivery,"
unused and in its packaging, with a Return Authorization Number, and the page says "No restocking fee will be charged."
Missing or wrong items must be reported by phone within 10 days of receipt.
RAM. RAM's warranty page offers a limited lifetime warranty: "If a RAM® component fails because of a manufacturing defect or a lack of quality, RAM® Mounts will repair or replace it free of charge (customer is responsible for cost of shipping)."
It is limited to buyers from RAM or its authorized resellers, and "Wear items consist of, but are not limited to, suction cups, foam pads, rubber feet, etc."
RAM's product pages add that products bought from RAM "can be returned within 30 days with no restocking fee (return shipping not provided)."
Vive. Vive's product page lists "One year guarantee" under what is included. Its guarantee policy says that "Purchases through 3rd party channels are only guaranteed if registered within 30 days of purchase,"
and that issues must be reported within the first 30 days. Its return policy says "All purchases have a 30-day return window"
and that the customer pays for the return label. Its conditions include "Purchase must have been made directly with Vive Health"
and "Issue must be confirmed with a Vive Health product expert using photos or videos for a refund request to be considered"
before a refund.
1800wheelchair. Its return policy offers "a 30-day refund with a 10% to 30% restocking fee for most items"
and lists "Wheelchair accessories (bags, ramps & attachments)"
among the items that carry the fee; return shipping is the customer's cost, and a return authorization number is required. The same policy says the seller does not ship to US territories, APO/FPO or international addresses.
SpinLife and Pride Gear. SpinLife's page for the Quantum Tubular Arm Cup Holder prints "No Warranty" in its list of what comes with the purchase; its page for the Diestco holder prints "6 Month Warranty", which matches Diestco's own term. The Pride Gear cup holder pages we read print no warranty or return terms, and we did not find a policy page linked from the store. Ask Pride or your dealer for the accessory warranty in writing before ordering.
Hot drinks, spills and what the pages say about safety
Is a wheelchair cup holder safe for hot coffee? Mobility Atlas read every cup holder page named in this guide on 12 November 2026 and searched the saved text for burn and scald warnings: none of them prints one. Several of the pages we read invite hot drinks. Drive's AZ0060 listing on 1800wheelchair says "Take your favorite hot or cold beverage with you anywhere,"
and Triumph's Prestige listing says it "Holds hot or cold beverages with ease."
Diestco's molded holders have a slot for a mug handle, and RAM's XL page prints drinks of 12 to 32 oz. RAM's Tough-Claw kit page and 1800wheelchair's RAM-brand listing both claim a drink will "never spill"; those are maker and seller claims, not test results. In our view, treat any holder as a place to park a lidded drink, not a promise against spills.
In our view, use a travel mug with a closing lid for hot drinks, set the holder where a spill falls away from your lap and legs, and take hot drinks out before a ramp, a curb or a vehicle lift. People with reduced sensation in the legs may not feel a spill; that is a question for your clinician, not for a product page.
Liquids and electronics do not mix. Pride's Go Chair owner's manual warns: "Even though the Go Chair has passed the necessary testing requirements for ingress of liquids, you should keep electrical connections away from sources of dampness, including direct exposure to water or bodily fluids and incontinence."
Its monthly checks include: "Keep your Go Chair clean and free of foreign material, such as mud, dirt, hair, food, drink, etc."
On a power chair or scooter, place the holder so a spill misses the joystick, the controller and the battery box.
Holders can break. One FDA report described in the next sections, filed by Pride Mobility Products about a Q6 Edge HD power chair, states that the user removed the cup holder and it "SPLIT IN HALF ALLEGEDLY" and cut their right hand; a field service technician replaced it. That is one report, not a rate, but it is a reason to check a plastic holder for cracks and to replace one that is split. Pride's Go Chair manual also lists, among changes it says are likely to affect conformance and risk evaluation, "adding components that have sharp edges (i.e., edges with less than 0.08 in. [2 mm] radius)"
.
Transfers, armrests and the chair's own manual
A holder on the armrest or the side frame sits where many people put a hand or slide a hip when they move from the chair. In our view, choose a holder that comes off quickly, such as Diestco's push-button A1324, Quokka's lever-locked CH-1 or a tool-free RAM Tough-Claw, if you transfer on that side, and take it off before a transfer rather than reaching round it. Which side you transfer from and how is for your physical or occupational therapist to decide; this guide does not advise on transfer technique.
Check the chair's own manual too. In a note about natural rubber latex, Pride's Go Chair manual adds: "Consult with the manufacturer regarding any after-market accessories."
It also prints a purchaser's agreement in which the buyer promises not to "change, alter, or modify this product"
, and warns that failing to follow the manual's instructions can lead to damage "including voiding the warranty."
In our reading, bolting a third-party bracket into a chair's armrest is the kind of change to ask the chair maker or dealer about first; a strap or clamp that leaves no holes is less likely to raise the question, but ask anyway if your chair is under warranty.
If you ride in a vehicle seated in your wheelchair, note what the Go Chair manual says about changes (it cites ISO 7176-19:2022, which in our reading is the standard for wheelchairs used as seats in motor vehicles): if a power chair must be physically modified, including the addition of third-party componentry, to meet the occupant's medical needs, "a risk assessment in conformance with ISO 14971, as outlined in ISO 7176-19:2022, should be performed."
In our view that is a reason to remove the holder and the drink before the chair is secured in a vehicle. Ask the vehicle provider or your dealer what they require.
Loads matter more on a light chair. RAM prints a 2 lb standard-use load for its Level Cup and ball base, and SpinLife prints a 3 lbs capacity for the Quantum Tubular Arm holder; the other pages we read print no load. A full large drink is heavy, and a holder on the push handles adds weight behind the rear wheels; check your chair's manual for any limit on loads hung on the back.
What FDA files show about cup holders
In the US, wheelchair accessories have their own FDA classification. The regulation 21 CFR 890.3910 defines a wheelchair accessory as "a device intended for medical purposes that is sold separately from a wheelchair and is intended to meet the specific needs of a patient who uses a wheelchair."
Its list of examples names an armboard, a lapboard, a pusher cuff, a crutch and cane holder and others, but not a cup holder. The openFDA classification file, last updated 2 November 2026, lists 8 product codes under that regulation, all class 1, including KNO, "Accessories, Wheelchair". In our reading, whether a given cup holder is regulated as a medical device depends on how its maker markets it; none of the cup holder pages we read names an FDA status.
To see what reports say, we ran an openFDA word search of device adverse event narratives for "cup holder", cupholder, "drink holder" and "beverage holder" on 12 November 2026 (data last updated 4 November 2026). It returned 96 reports; we checked the device name and product code on each and read the 7 mobility records in full: 89 concern hip implant cups, surgical instruments, laboratory analyzers and other devices. 7 concern mobility devices: 2 Pride power chairs, 3 Medline transport chairs and 2 Medline rollators. All 7 were filed by the maker. The 96 reports were received between 4 February 1997 and 21 September 2026.
| Report | Device as stored | What the narrative says about the holder |
|---|---|---|
| 8020828, received 2018 | Pride, Q6 Edge HD power chair | Holder split when removed; hand cut alleged; holder replaced |
| 17189592, received 2023 | Pride, Q6 Edge 3 power chair | Holder replaced with other parts after an alleged ejection |
| 25804112, received 2026 | Medline transport chair | Chair arrived without its cup holder; brake complaint |
| 25839532, received 2026 | Medline transport chair | Holder broken and held with duct tape; leg rest broke |
| 50846178, received 2026 | Medline transport chair | Footrest and cup holder missing on delivery |
| 50378079, received 2026 | Medline rollator | Holder screws would not tighten |
| 50668268, received 2026 | Medline rollator | Rail holding the cup holder broke |
Only report 8020828 describes an injury linked to the holder itself, and it is an allegation the maker could not examine: the narrative says the customer disposed of the old holder. In report 17189592 the cup holder appears only in a list of parts the maker replaced; the narrative does not link it to the alleged event. Five of the reports were filed as part of a retrospective review, their narratives say.
Read these with FDA's own warning. FDA's page about the MAUDE database calls it a "passive surveillance system"
with limitations, including "under-reporting of events, inaccuracies in reports, lack of verification that the device caused the reported event"
. Reports are reports, not proof and not a rate. A word search also misses reports that describe a holder in other words. An openFDA word search of recall records for "cup holder", cupholder and "drink holder" (data last updated 7 November 2026) found 1 recall, for a hip-surgery trial cup holder, not a drink holder.
Does Medicare or insurance pay for a cup holder?
In the US, Original Medicare pays for wheelchair accessories under a coverage rule, LCD L33792, Wheelchair Options/Accessories (version 43). In the version in effect when it was saved on 9 November 2026 (revision effective 1 October 2025), the rule says: "Options and accessories for wheelchairs are covered if the beneficiary has a wheelchair that meets Medicare coverage criteria and the option/accessory itself is medically necessary."
The coverage section of that rule, as saved, names no cup holder. A new version of the rule is listed as taking effect for services on or after 20 December 2026; the parts of it we saved also name no cup holder.
In our reading, a cup holder will rarely meet the "medically necessary" test, and you should expect to pay for one yourself. The policy article A52504 (version 61, revision effective 1 October 2025) says that a replacement accessory for a rollabout or transport chair "is billed using code E1399"
; a code is a billing route, not a promise of payment. If you believe a holder is part of a medical need, for example because you cannot otherwise carry fluids you are told to drink, ask your supplier and your doctor whether it can be documented, and get the answer in writing.
Medicare Advantage plans, Medicaid programs, the VA and private insurers set their own rules; we did not read their pages for this guide, so ask the plan directly. Outside the US, funding schemes differ again. These are US rules; confirm with your plan before you buy.
Three traps when buying a wheelchair cup holder
Trap one: buying by the word "universal". Walmart's first page alone carried 24 cup holder tiles with the word universal in the title, and the makers' pages use the word too. Drive's universal holder prints a tube range of 5/8 to 1 inch; Vive's prints 1/8 to 1.5 inches; RAM's Tough-Claw prints .625 to 1.14 inches. A universal holder fits the tubes in its printed range, no more. Measure first.
Trap two: trusting a model name in a tile title. A tile that says "Compatible with" a Pride, Jazzy or Permobil model is the seller's claim. Pride Gear's model lists, and RAM's page naming the armrest and seat tracks of Invacare, Permobil and Quickie chairs, are the makers' claims. Even those lists overlap in ways that need a dealer's eye, as the Victory scooters on two Pride lists show. Give the dealer your chair's model and serial number and ask for the part number.
Trap three: forgetting the drink. A holder that fits the chair may not fit your mug. Drive's holder is printed as 3 inches wide on one page and 3.5 on another; SnapIt's standard holders are 2.9 inches inside; RAM's 16oz Level Cup takes 2.5 to 3.5 inches. A handled mug needs a slot or an open side. Measure the drink you carry, and check the return terms before you open the package, because 1800wheelchair charges a restocking fee on accessories and Vive asks for its return label to be paid.
Three composite scenarios
These are composite scenarios, not individual customers. Each uses only the documents of the holder it names.
Scenario one: a manual wheelchair user wants a holder on the front frame tube and measures it at 1 inch across. Drive's STDS1040S prints a tube range of 5/8 to 1 inch, so the tube is at the top of the range and the user leaves out the rubber insert, as Drive's sheet allows. They carry a can; Drive's holder is printed at 3 inches wide on 1800wheelchair's page and 3.5 on Drive's own, so they measure the can against the smaller figure first. SpinLife lists it at $14 under Model No. STDS1040S. They swivel the cup level, tighten the knob without over-tightening, as the sheet says, and keep the receipt for Drive's one-year warranty.
Scenario two: a Jazzy 600 ES power chair user wants a holder on the armrest. Pride Gear's KIT2304745 lists the Jazzy 600 ES among its models, at $32.00. Because Pride's page says "Not all accessories are available for all products,"
they give the dealer the chair's model and serial number and ask the dealer to confirm the kit before ordering. They ask the dealer which armrest it should go on, so the drink sits clear of the joystick.
Scenario three: a Go Go Elite Traveller scooter owner wants a holder and storage for trips. Pride Gear lists the C Style Cup Holder ACCASMB2288 at $32.00 and the C Style Scooter Accessory Kit KIT2102055, with the cup holder, a small saddle bag and a rear basket, at $140.00; both list the Go Go Elite Traveller 3-wheel and 4-wheel. The kit's basket weighs 2.42 kg on Pride Gear's page. They choose the cup holder alone, because the kit's basket adds weight to a scooter they lift into a car trunk.
What to ask before you buy, and how we can help
- What is the exact model, year and serial number of my chair or scooter, and which tube or armrest will carry the holder?
- What is the tube's diameter or shape at that spot, and does the holder's printed range include it?
- What is the inside diameter of the holder, and will my can, bottle or mug fit, handle and all?
- Does the holder come off without tools, so I can remove it before a transfer or a car journey?
- Does fitting it need holes or the chair's own screws, and does that affect the chair's warranty?
- What warranty does the maker print for the holder, and what does the seller charge to return it?
- Can the dealer confirm the part number in writing for my model?
Ask your occupational therapist or seating clinician where a holder can go without getting in the way of your transfers or your posture, and whether an under-cushion holder suits your cushion. The choice of holder is yours; the effect on how you sit and move is a clinical question.
Mobility Atlas can find and quote any holder in this guide, and parts that are not listed on our pages, such as a replacement clamp insert or a mount for an older chair. Send an enquiry or a part request with your chair's model and the holder you want; we reply with a written quote that includes delivery to your country, and nothing is charged before you accept it. You can also browse wheelchair everyday accessories, and our guides to wheelchair parts and Drive Medical cover the wider ranges.
Sources and documents
Every source below was read and saved as text on 12 November 2026, except Medicare's LCD L33792 and article A52504 and FDA's MAUDE page, which were read and saved on 9 November 2026. The full list with links is at the foot of this page. Makers' pages: Drive Medical (three cup holder pages and the STDS1040S owner's sheet), Diestco (category, six cup holder pages, policies), Pride Mobility (Jazzy cup holder page, Go Chair owner's manual INFMANU4750/Rev E), Pride Gear (search and product data for its cup holders and kits), RAM Mounts (four product pages, search page, warranty), Vive (product page, guarantee and return policies), Quokka (CH-1 and AD-1), HandiCup and Rehadesign. Sellers: 1800wheelchair (category and 14 product pages), Walmart (first results page), SpinLife (search and two product pages) and Adaptive Mall. Regulators: eCFR 21 CFR 890.3910, openFDA classification, event and recall searches, FDA's MAUDE page, CMS LCD L33792 and article A52504. Catalog: Mobility Atlas catalog rows AC-081, AC-082, AC-336, AC-344 and AC-356, used for non-price facts only.
Method. Every page was read in a browser and saved with its address and read date, and the guide was written from those files only. Counts, ranges, gaps and unit conversions were computed by a script from the saved text, and the script's results are stored with the guide. Quotes were checked by a script against the saved text, and every number was checked the same way. Where two pages disagree we give both. We did not handle any product.
Prices checked November 2026 (listed US prices read on 12 November 2026, before tax and shipping).
Documents checked November 2026 (makers' pages, manuals and openFDA files read on 12 November 2026; CMS documents and FDA's MAUDE page read on 9 November 2026).
This article is general information. Rules and prices differ by country and change, so confirm them before you buy or travel.
Common questions
What is the best wheelchair cup holder?
There is no single best one; the right holder is the one that fits your chair's tube or armrest and your drink. For a round tube from 5/8 to 1 inch, Drive's STDS1040S prints a fit; for a Pride chair or scooter, Pride Gear prints model lists for each holder; for a tube of any shape, strap mounts such as Diestco's A1323 or Quokka's AD-1 adapter are made for it. If the chair tilts or climbs, consider a self-leveling holder such as RAM's Level Cup, which RAM's page says keeps the drink upright with two pivot points.
How do I measure my wheelchair tube for a clamp-on cup holder?
Wrap a tape measure or a strip of paper once around the tube where the holder will go, measure the length, and divide by 3.14 to get the diameter; calipers give it directly. Compare that with the range the holder's page prints, such as 5/8 to 1 inch for Drive's STDS1040S or .625 to 1.14 inches for RAM's Tough-Claw. In our view, avoid tubes that carry brake levers, hinges or a backrest release.
Will a cup holder fit my power wheelchair's armrest?
Only if the maker says so for your model, or if the armrest has a tube or track the holder is made for. Pride Gear's KIT2304745 lists 16 Pride models, including the Jazzy 600 ES and Go Chair, and its Jazzy Carbon holder lists the Jazzy Carbon only. Pride's page also says not all accessories are available for all products, so give the dealer your chair's model and serial number before you order.
Can I carry hot coffee in a wheelchair cup holder?
Some pages invite it: 1800wheelchair's listing for Drive's AZ0060 mentions hot or cold beverages, and Triumph's Prestige listing says it holds hot or cold beverages. None of the cup holder pages we read on 12 November 2026 prints a burn warning or a spill test. In our view use a travel mug with a closing lid, place the holder so a spill falls away from your lap and the controls, and take hot drinks out before ramps, curbs and vehicle lifts.
Does Medicare pay for a wheelchair cup holder?
In our reading, rarely. Medicare's rule for wheelchair accessories, LCD L33792, covers an accessory only if the person has a covered wheelchair and the accessory itself is medically necessary, and the coverage section we saved names no cup holder. Medicare Advantage, Medicaid, the VA and private plans set their own rules, so ask them in writing. Prices and funding also differ by country, seller and sales period.
What warranty comes with a wheelchair cup holder?
It depends on the document. Drive's sheet for STDS1040S prints a one-year limited warranty in English; Diestco's policies page prints 6 months after purchase; RAM's warranty page prints a limited lifetime warranty with wear items excluded; Vive's product page lists a one year guarantee; SpinLife's page for Pride's Quantum Tubular Arm holder prints No Warranty. Check the seller's return terms too: 1800wheelchair charges a restocking fee on accessories.
Sources
- Drive Medical: Universal Cup Holder (swivel) STDS1040S (read 12 November 2026)
- Drive Medical: Universal Cup Holder owner's sheet, installation and 1 year limited warranty
- Drive Medical: Nitro Cup Holder 10266-CH
- Drive Medical: Nitro Universal Cup Holder RTL102662-CUP
- Diestco: Cup holders category
- Diestco: Cup holder for padded armrests A1322
- Diestco: Cup holder for exposed tubing A1323
- Diestco: Cup holder for molded armrests A1324
- Diestco: Unbreakable Cupholder, vertical grip A1326
- Diestco: Unbreakable Cupholder, horizontal grip A1327
- Diestco: Unbreakable Cupholder, front grip A1328
- Diestco: Policies (returns and 6-month warranty)
- Pride Mobility: Jazzy power chair accessories, Cup Holder
- Pride Mobility: Go Chair owner's manual INFMANU4750/Rev E
- Pride Gear: search results for cup holder (prices read 12 November 2026)
- Pride Gear: Pride Cup Holder KIT2304745
- Pride Gear: C Style Cup Holder ACCASMB2288
- Pride Gear: B Style Cup Holder ACCASMB2287
- RAM Mounts: Level Cup 16oz Drink Holder with Ball RAM-B-132BU
- RAM Mounts: Level Cup 16oz with Tough-Claw RAM-B-132-400U
- RAM Mounts: Level Cup XL 32oz with Tough-Claw RAP-B-417-400U
- RAM Mounts: Universal Wheelchair Ball Base RAM-B-238-WCT
- RAM Mounts: search results for wheelchair cup
- RAM Mounts: Warranty and returns
- Vive Health: Cup Holder Attachment MOB1024GB
- Vive Health: Guarantee policy
- Vive Health: Shipping and return policy
- Quokka: Cupholder CH-1
- Quokka: Adapter AD-1
- HandiCup: Black HandiCup Wheelchair Cup Holder
- Rehadesign: Wheelchair accessories shop
- 1800wheelchair: Wheelchair cup holders category (prices read 12 November 2026)
- 1800wheelchair: Universal Cup Holder by Drive
- 1800wheelchair: Drive Cup Holder AZ0060
- 1800wheelchair: Self-Leveling Drink Cup Holder (returns policy on the page)
- 1800wheelchair: Wheelchair Cup Holder (Diestco A132)
- 1800wheelchair: Combo Cell Phone/Drink Holder (SnapIt W0014)
- 1800wheelchair: Diestco Cupholder for the Freerider Luggie
- 1800wheelchair: Diestco Unbreakable Fabric Cupholder
- 1800wheelchair: Wheelchair and Walker Cup and Bottle Holder (SnapIt W001C)
- 1800wheelchair: Powerchair Cup and Bottle Holder (SnapIt W001CA)
- 1800wheelchair: Powerchair Drink Holder for Cans with Insulated Sleeves (SnapIt W001KA)
- 1800wheelchair: Scooter Can and Bottle Holder (SnapIt W001CHB)
- 1800wheelchair: Scooter Drink Holder for Cans with Insulated Sleeves (SnapIt W001KHB)
- 1800wheelchair: Wheelchair Beverage Holder (Sammons Preston)
- 1800wheelchair: Triumph Mobility Prestige Cup holder
- Walmart: search results for wheelchair cup holder, first page (prices read 12 November 2026)
- SpinLife: search results for cup holder (prices read 12 November 2026)
- SpinLife: Pride Quantum Tubular Arm Cup Holder ACCASMB2634
- SpinLife: Diestco Scooter/Power Wheelchair Cup holder A132XX
- Adaptive Mall: Quokka Cup Holder with Mounting Kit
- eCFR: 21 CFR 890.3910, Wheelchair accessory
- openFDA: device classification, regulation 890.3910
- openFDA: device adverse event reports, word search for cup, drink and beverage holder
- openFDA: device recalls, word search for cup and drink holder
- FDA: About the MAUDE database (read 9 November 2026)
- CMS: LCD L33792, Wheelchair Options/Accessories (read 9 November 2026)
- CMS: Article A52504, Wheelchair Options/Accessories policy article (read 9 November 2026)
Read on . The wording of the article is our own.




