Professional Wheelchair Bearing Removal and Installation Tool Kit
Tool kits. Complete kit for pulling and pressing wheelchair bearings, with stand and work mat.
US$230
Last updated: 14 November 2026 · Total: 61 products
A few tools and regular care prevent most roadside problems. Hex key sets such as the Wera Hex-Plus metric and SAE set fit the bolts found on nearly every frame. Specialist kits, like the Wheelchair Bearings removal and installation tool kit, press caster and wheel bearings in and out without damaging the hub. Grease and lubricant kits, for example from Finish Line, are intended for axles, caster stems and folding joints. Protective covers include RehaDesign Wheelchair Slippers, which slip over dirty tires so the chair can roll across clean floors.
Where to buy tools and maintenance: you can order any of the 61 products on this page through Mobility Atlas with delivery to Australia, New Zealand, the United Arab Emirates, Saudi Arabia, Qatar, Kuwait, Bahrain, Oman, Singapore, Malaysia, Hong Kong, the Philippines, Israel, Mexico, Brazil, Colombia, Chile, Peru, Argentina and the United States. 61 of them have our price, from US$2 to US$318 before delivery. Brands here include Park Tool, Wheelchair Bearings, Finish Line, Topeak, Wera and Schwalbe. Send an enquiry with your country, and Anna replies within 24 hours with a written quote that adds delivery and any import duties. Delivery by country
No checkout, no surprisesYou send an enquiry, we quote availability, price and delivery for your country. You decide after that.How it worksTool kits. Complete kit for pulling and pressing wheelchair bearings, with stand and work mat.
US$230
Tool kits. Combined metric and imperial hex key set sold by a wheelchair parts specialist.
US$64
Lubricants and care. Two-part kit with lithium grease for bolts and bearings and a dry lube for quick-release axles.
US$23
Protective covers. Slip-on tyre covers for the rear wheels; matching caster 'Socks' are sold separately or as a bundle.
US$45
Tire levers. A set of three composite tire levers that snap together, with a spoke hook to hold a lever in place.
US$8
Out of stock at source
Tire levers. Three Schwalbe levers shaped to clip onto the rim, which helps both when removing and when mounting a tire.
US$7
Tire levers. Three thin resin tire levers from Zefal with a reversible hook end for taking tires off and putting them back on.
US$6
Tire levers. A 10 in chrome plated steel lever with a screwdriver-style handle and a wide shovel tip for stubborn tires.
US$22
Tire levers. A heavy-duty composite lever made for mounting and removing wheelchair tires, including solid polyurethane ones.
US$11
Puncture repair kits. A glue-type patch kit with six patches, sandpaper and vulcanizing fluid for permanent repairs to butyl tubes.
US$7
Puncture repair kits. Six self-adhesive patches and a sandpaper square in a 5 g box for quick roadside tube repairs without glue.
US$8
Puncture repair kits. A compact Zefal tube repair kit with rubber cement and a stainless steel grater, offered in four versions.
US$6
Puncture repair kits. A pocket kit with six pre-glued patches, a metal scuffer and two tire levers for roadside tube repairs.
US$9
Tire sealant. A liquid sealant injected into an inner tube through the valve to seal small tread punctures as they occur.
US$12
Pumps and inflators. A floor pump with gauge and a locking head that adjusts itself to Presta or Schrader valves, rated to 160 psi.
US$64
Pumps and inflators. A steel-barrel floor pump with a 3 in gauge and a TwinHead that fits Presta, Schrader and Dunlop valves, rated to 160 psi.
US$81
Pumps and inflators. A dual-action aluminium mini pump with an in-line gauge and a head that fits Presta and Schrader valves.
US$34
Pumps and inflators. A compact aluminium pump with a fold-out foot peg and hose that works like a small floor pump, rated to 160 psi.
US$69
Pumps and inflators. A metal push-to-inflate CO2 head supplied with two threaded cartridges for filling a tire in seconds without pumping.
US$26
Valve adapters and extenders. A small screw-on adapter that lets a Presta valve be inflated with a Schrader pump head.
US$2
Valve adapters and extenders. A brass adapter from Schwalbe that lets Dunlop and Presta valves take a Schrader (AV) pump head.
US$3
Valve adapters and extenders. A pair of 30 mm brass extensions that lengthen a Presta valve so it reaches through a deep rim.
US$15
Pressure gauges. A 45 g digital tire pressure gauge with a swivelling dual head for Schrader and Presta valves, reading up to 10 bar.
US$32
Bearing tools. A single-size puller for drawing R8 (1/2 inch bore) bearings out of wheelchair rear hubs and forks.
US$23
Bearing tools. A single-size puller for 608 bearings with an 8 mm bore, the size found in many wheelchair front caster wheels.
US$23
Bearing tools. A press tool for removing and fitting R8 (1/2 inch bore) bearings in wheelchair rear hubs and forks.
US$35
Out of stock at source
Bearing tools. Three tools that pull out a bearing outer race left stuck in a caster, fork, fork mount or rear hub after a bearing has come apart.
US$58
Bearing tools. A hard maple block with a rubber top that supports a caster, wheel or fork while bearings are driven out or pressed in.
US$38
Bearing tools. Right-angle snap ring pliers with a spring-open action for the retaining rings found in some wheelchair forks and caster mounts.
US$18
Workshop equipment. A roll-up neoprene mat that keeps grease and small parts off the floor or table while working on a wheelchair indoors.
US$29
Spoke and wheel tools. A truing stand built for wheelchair wheels, with receivers for both 1/2 inch and 5/8 inch quick-release axles.
US$173
Bearing tools. A 5/16 inch soft-metal punch for tapping bearings out of wheelchair hubs, forks and casters.
US$19
Tire tools. A pair of steel tire levers with wide handles and a thumb loop, designed for wheelchair users with limited grip.
US$26
Tire tools. A hinged lever that lifts the last tight section of a tire bead over the rim edge during fitting.
US$23
Tool kits. A pouch of hand tools sold for maintaining Quickie wheelchairs, with both inch and metric hex keys.
US$75
Hex key sets. A nine-piece set of inch hex keys from .050 to 3/16, sold by a wheelchair retailer for socket-head fasteners.
US$15
Hex key sets. Eight metric T-handle hex drivers from 2 to 10 mm in a bench stand, with ball ends on the larger sizes.
US$59
Spoke and wheel tools. One spoke wrench with three slots for 3.23, 3.30 and 3.45 mm spoke nipples.
US$15
Spoke and wheel tools. A hand-held gauge that reads spoke tension so a wheel can be tensioned evenly.
US$134
Wrenches. Twelve metric combination wrenches from 6 to 17 mm, each with an open end and a 12-point box end.
US$119
Wrenches. A compact adjustable wrench whose jaws open to 24 mm, sized for a travel tool bag.
US$29
Screwdrivers. Four shop screwdrivers: two Phillips and two flat blade, with dual-density grips.
US$33
Hex key sets. Seven metric hex keys from 1.5 to 6 mm folded into one compact handle.
US$15
Torque tools. A 3/8 inch drive click torque wrench covering 2 to 14 Nm in 0.2 Nm steps.
US$117
Out of stock at source
Lubricants and care. A 113 g tube of NLGI Grade 2 bearing grease with a wide working temperature range.
US$19
Lubricants and care. A 113 g tube of anti-seize for threads and press fits in steel, aluminum and titanium.
US$13
Thread lockers. A 10 mL bottle of medium-strength thread locker that holds bolts against loosening yet allows later removal.
US$23
Wrenches. Eleven metric combination wrenches from 8 to 19 mm with a slim ring end, supplied on a hook-and-loop strip.
US$198
Torque tools. A 20-piece kit built around a 1/4 inch hex drive click torque wrench covering 2.5 to 25 Nm.
US$318
Hex key sets. Nine colour-coded metric L-keys from 1.5 to 10 mm with ball ends, in a labelled holder.
US$56
Hex key sets. Thirteen inch-size ball end L-keys from .050 to 3/8 in a holder that fans the keys open.
US$64
Torque tools. A compact adjustable torque wrench for 2 to 10 Nm with a ratcheting head and five bits.
US$86
Hex key sets. Nine long-arm metric L hex wrenches from 1.5 to 10 mm in a holder.
US$50
Lubricants and care. A quick-drying drip or aerosol lubricant that sets to a dry, wax-like film and resists dirt pickup.
from US$10
Cleaners. An 18 fl oz aerosol degreaser that dissolves oily grime and dries in seconds without a water rinse.
US$18
Lubricants and care. A synthetic, water-resistant grease sold in a 3.5 oz tube and in 1 lb and 4 lb tubs.
from US$13
Lubricants and care. A 10 oz spray lubricant that dries quickly to a film without sticky residue and resists dust buildup.
US$31
Lubricants and care. A light oil with PTFE in 2 oz and 6 oz drip bottles with a straw for reaching into tight joints.
US$8
Lubricants and care. An aerosol spray that drives out water after washing and leaves a thin, non-sticky protective film.
US$19
Cleaners. A spray-and-wipe cleaner that lifts surface dirt and polishes without water or rinsing.
US$27
Check tire pressure and brakes weekly, and clean hair and dirt from caster axles regularly. A fuller inspection of bearings, bolts, upholstery and frame once or twice a year suits most users, more often with heavy use.
Spin the wheel off the ground. Grinding noise, roughness, side play or a wheel that stops quickly all point to worn bearings. Casters are affected first because they collect hair and grit.