WAFFLE Overlay
Mattress overlays. A non-powered static-air overlay that sits on the existing mattress, inflated with a hand pump; it has venting holes, straps and hand wells for turning and lateral transfers.
US$103

Drive Medical (Drive DeVilbiss Healthcare) · Mattress overlays · HL-055
The Drive Medical Med-Aire 5" (14025NS) is a powered overlay that goes on a standard foam or innerspring mattress. Its 17 removable air cells are 5 in (127 mm) deep and give alternating pressure on 10 minute cycles, low air loss or a static mode. A pillow feature keeps the 3 head cells static, and there are adjustable patient weight settings and a visual low pressure alarm.
You can order the Drive Medical Med-Aire 5" Alternating Pressure and Low Air Loss Overlay System through Mobility Atlas with delivery to Australia, New Zealand, the Gulf, Southeast Asia, Israel, Latin America, the United States and most other countries. Send an enquiry with your country, and Anna replies within 24 hours with a written quote. It has no public price; we quote it for your configuration and country.
For people at home or in long-term care who need powered pressure relief on top of the mattress they already have. As a pressure-care surface, it is normally chosen with an occupational therapist, nurse or seating specialist.
The same units on every product, converted from the specifications below. Where a source gives two limits, the lower one is shown.
As printed by the maker or the seller on 21 November 2026. Send us the number from your quote or the product label and we match it before we buy.
Published by the maker or the seller, seen on 21 November 2026. Ask for them with your enquiry and we send them with the quote.
| Max user weight | 350 lb (158.8 kg) |
|---|---|
| Air cells | 17, removable |
| Cell height | 5 in (127 mm) |
| Cycle | 10 minutes |
| Modes | Alternating pressure, low air loss, static |
| Cover | Top nylon/PU coated, base nylon/PVC |
| HCPCS | E0372 |
| Warranty | 24 months |
| Brand country | USA |
| Brand | Drive Medical (Drive DeVilbiss Healthcare) |
| Category | Beds and pressure care, Mattress overlays |
| Catalog ID | HL-055 |
Collected from the source page; product details last checked on 21 November 2026. Details can change, so we confirm them in your quote.
Warranty terms shown above are the ones published by the maker or retailer. Ask us how they apply to a product bought through us and shipped to your country.
It is designed to go on top of a standard foam or innerspring mattress.
It is rated for 350 lb (158.8 kg), with adjustable patient weight settings.
Yes, it has a static mode, and the pillow feature keeps the 3 head cells static.
Yes. Mobility Atlas delivers it to Australia, New Zealand, the Gulf, Southeast Asia, Israel, Latin America, the United States and most other countries, and Anna sends a written quote with delivery to your country within 24 hours. As a rough guide, items in stock at a US or European supplier usually arrive in one to three weeks. Delivery for an item like this starts at about US$750; the Ordering section on this page has the details on cost, payment and cancellation.
PulsCar, LLC, the US company that runs Mobility Atlas, buys it from the maker or a dealer and resells it to you. Anna, the founder, handles every order herself. Mobility Atlas is an independent buying service, not an official Drive Medical dealer.
Yes, with a full refund, until the product has been bought for you. Payment is taken only after you accept the written quote.
Press Add to enquiry, add any other products or parts, and send the list with your country, sizes and options. We do not ask for payment details.
We check availability with the maker or a dealer and send you a price with delivery to your country.
If you accept the written quote, we buy the product and arrange delivery to you. Nothing is charged before that.
Mobility Atlas is an independent buying service. We are not an official dealer of Drive Medical. How ordering works · Delivery, payment and returns
Mattress overlays. A non-powered static-air overlay that sits on the existing mattress, inflated with a hand pump; it has venting holes, straps and hand wells for turning and lateral transfers.
US$103
Mattress overlays. A 5 in air overlay with 17 bladders and one pump that gives both alternating pressure and low air loss; it goes on top of an existing mattress.
Price on request
Mattress overlays. A PVC bubble pad with 130 air cells and a small air pump, laid on top of a normal mattress.
Price on request
Profiling beds. Four-section electric profiling home-care bed that one person can assemble without tools.
US$1,895
Pressure-relief mattresses. Non-powered air-cell mattress overlay with interconnected cells in four adjustable zones.
US$2,019-2,272