Etude Plus
Profiling beds. Four-section electric profiling home-care bed that one person can assemble without tools.
US$1,895

The Eleganza 1 is a hospital ward bed from the Czech maker LINET. It has a one-button cardiac-chair position, Trendelenburg and reverse-Trendelenburg tilt of 15 degrees, a 15 cm bed extension and a 5th castor for steering straight along corridors. Split plastic side rails 38 cm high lower with a gas-spring soft drop. The bed weighs 135 kg with basic equipment.
You can order the LINET Eleganza 1 through Mobility Atlas with delivery to Australia, New Zealand, the Gulf, Southeast Asia, Israel, Latin America, the United States and most other countries. Send an enquiry with your country, and Anna replies within 24 hours with a written quote. It has no public price; we quote it for your configuration and country.
For hospitals, rehabilitation centres and hospices that need a clinic-grade electric bed with full tilt functions. The bed, mattress and rails are normally chosen with an occupational therapist, nurse or seating specialist.
The same units on every product, converted from the specifications below. Where a source gives two limits, the lower one is shown.
As printed by the maker or the seller on 21 November 2026.
Published by the maker or the seller, seen on 21 November 2026. Ask for them with your enquiry and we send them with the quote.
| Max user weight | 185 kg (safe working load 185-250 kg by configuration) |
|---|---|
| Bed height range | 37-73.5 cm (39.5-76 cm with 150 mm castors) |
| Outer size | 218 x 99.5 cm |
| Mattress size | 200 x 90 x 14 cm recommended |
| Backrest angle | 70° |
| Thigh rest | 35° |
| Trendelenburg | 15° / reverse 15° |
| Side rail height | 38 cm |
| Bed weight | 135 kg, basic equipment |
| Lifting pole | 75 kg bearing capacity |
| Brand country | Czech Republic |
| Brand | LINET |
| Category | Beds and pressure care, Profiling beds |
| Catalog ID | HL-038 |
Collected from the source page; product details last checked on 21 November 2026. Details can change, so we confirm them in your quote.
LINET gives a maximum patient weight of 185 kg; the safe working load is 185-250 kg depending on configuration.
LINET recommends a mattress of 200 x 90 x 14 cm, with a maximum mattress height of 14 cm.
It weighs 135 kg with basic equipment.
Yes. Mobility Atlas delivers it to Australia, New Zealand, the Gulf, Southeast Asia, Israel, Latin America, the United States and most other countries, and Anna sends a written quote with delivery to your country within 24 hours. As a rough guide, items in stock at a US or European supplier usually arrive in one to three weeks. Delivery for an item like this starts at about US$750; the Ordering section on this page has the details on cost, payment and cancellation.
PulsCar, LLC, the US company that runs Mobility Atlas, buys it from the maker or a dealer and resells it to you. Anna, the founder, handles every order herself. Mobility Atlas is an independent buying service, not an official LINET dealer.
Yes, with a full refund, until the product has been bought for you. Payment is taken only after you accept the written quote.
Press Add to enquiry, add any other products or parts, and send the list with your country, sizes and options. We do not ask for payment details.
We check availability with the maker or a dealer and send you a price with delivery to your country.
If you accept the written quote, we buy the product and arrange delivery to you. Nothing is charged before that.
Mobility Atlas is an independent buying service. We are not an official dealer of LINET. How ordering works · Delivery, payment and returns
Profiling beds. Four-section electric profiling home-care bed that one person can assemble without tools.
US$1,895
Profiling beds. German home-care profiling bed with a 4-section 90 x 200 cm mattress base, wooden surrounds and a 24 V Linak drive. Safety sides click into pre-installed holders without tools; a 100 cm wide, a 180 cm short and a machine-washable version are also made.
Price on request
Profiling beds. Long-term-care and home bed frame whose sleep deck travels from 7 in to 30 in above the floor, with a 650 lb safe working load and width kits up to 42 in, so one frame serves standard and bariatric residents. Four actuators give back, knee, hi-low, a one-touch chair position and an AutoTransfer height.
US$4,130
Profiling beds. Taiwanese three-motor home-care bed that comes apart for storage and transport, with wooden head and foot boards. The motors give an auto-chair back/knee position, height and Trendelenburg tilt; three types of side rail can be fitted, including a rotating armrest rail to help standing up.
Price on request
Profiling beds. Basic full-electric home-care bed: a hard-wired 6-button pendant moves head, foot and height, and a built-in hand crank works in a power cut. Bed ends are interchangeable and washable; mattress and rails are sold separately.
US$1,265