USD 149.99 (wheelchairbearings.com)
Wheelchair Wheel Truing Stand for 1/2" & 5/8" Wheelchair Axles
Spoke and wheel tools. A truing stand built for wheelchair wheels, with receivers for both 1/2 inch and 5/8 inch quick-release axles.
Park Tool
Photo could not be loaded
Park Tool · Spoke and wheel tools · AC-201
Park Tool SW-7.2 Triple Spoke Wrench
A loose or uneven spoke makes a wheel wobble, and correcting it needs a wrench that fits the nipple closely. The SW-7.2 combines three sizes in one tool: 3.23 mm, 3.30 mm and 3.45 mm across the nipple flats. It is nickel plated and made in the USA. This is a general bicycle wheel tool, so measure or test the nipples on your wheelchair wheels before relying on it.
- Type
- Spoke wrench
- Size 0
- 3.23 mm (0.127 in)
- Size 1
- 3.30 mm (0.130 in)
- Size 2
- 3.45 mm (0.136 in)
Park Tool SW-7.2 Triple Spoke Wrench key features
- Three nipple sizes: 3.23, 3.30 and 3.45 mm
- 3.23 mm fits DT Swiss, Sapim, Wheelsmith and Pillar nipples
- Nickel plated finish
- Made in the USA
- One tool in the bag covers several wheels
Who the Park Tool SW-7.2 Triple Spoke Wrench suits
Suits wheelchair users and technicians who keep steel-spoked wheels true and want one wrench for several nipple sizes. It is a general tool and will not fit wheels with special nipples, such as some fibre-spoked designs.
Park Tool SW-7.2 Triple Spoke Wrench specifications
| Type | Spoke wrench |
|---|---|
| Size 0 | 3.23 mm (0.127 in) |
| Size 1 | 3.30 mm (0.130 in) |
| Size 2 | 3.45 mm (0.136 in) |
| Finish | Nickel plated |
| Made in | USA |
| Listed price | USD 12.95 |
| Maker country | USA |
| Brand | Park Tool |
| Category | Tools and maintenance, Spoke and wheel tools |
| Catalog ID | AC-201 |
Compared with the source page on 5 October 2026. Details can change, so we confirm them in your quote. Open the source page.
Park Tool SW-7.2 Triple Spoke Wrench: common questions
Which size do my wheels need?
It depends on the nipples. 3.23 mm is common on DT Swiss and Sapim nipples. Try each slot and use the snuggest fit.
Does it fit fibre-spoked wheelchair wheels?
Not confirmed. Fibre-spoked wheels often use their own nipple tools, so check with the wheel maker.
Is it made for wheelchairs?
No. It is a general bicycle spoke wrench that also suits wheels using the same nipple sizes.
How to get a quote for the Park Tool SW-7.2 Triple Spoke Wrench
Add it to your enquiry list
Press Add to enquiry. You can add other products and parts to the same list.
Tell us your country and needs
Send the list with your country, sizes and any options you want. No payment details are asked.
Get a personal reply
You receive availability, a price and delivery options by email, and decide after that.
Similar to the Park Tool SW-7.2 Triple Spoke Wrench
All Tools and maintenanceUSD 115.95 (parktool.com)
TM-1 Spoke Tension Meter
Spoke and wheel tools. A hand-held gauge that reads spoke tension so a wheel can be tensioned evenly.
USD 199.99 (manufacturer)
Professional Wheelchair Bearing Removal and Installation Tool Kit
Tool kits. Complete kit for pulling and pressing wheelchair bearings, with stand and work mat.
USD 54.99 (retailer)
Hex-Plus Metric and SAE Hex Key Set
Tool kits. Combined metric and imperial hex key set sold by a wheelchair parts specialist.
USD 19.99 sale / 25 regular (retailer)
Wheelchair Grease and Lubricant Kit
Lubricants and care. Two-part kit with lithium grease for bolts and bearings and a dry lube for quick-release axles.
Chairs and other parts
Guides for this kind of product
How-to & Maintenance · 8 min read
Tire and caster care in 15 minutes
Soft tires and hair-wrapped casters make every push harder. This short routine keeps both in order and tells you when parts need replacing.