Price on request
Eliminator NRG
Racing. Top-of-range racing chair with carbon main frame and fork and a modular aluminium cage.
Top End
Photo could not be loaded
The Top End Eliminator OSR with U cage is a three-wheel racing wheelchair with a 6061-T6 oval aluminium frame and a cage for the kneeling position. It weighs 21 lb and carries athletes up to 250 lb. The T-frame has a track compensator for bends, a caliper hand brake, wrap-around fenders and a 20 in front wheel.
- Chair weight
- 21 lb
- Max user weight
- 250 lb
- Lower frame width
- 11 to 18 in
- Upper frame width
- 10 to 17 in
Top End Eliminator OSR (U Cage) key features
- 6061-T6 oval aluminium T-frame
- U cage with aluminium knee plate for kneeling athletes
- Track compensator system for cornering
- 20 in front wheel, 700C or 26 in rear wheels
- Caliper hand brake
- Wrap-around fenders and aluminium side panels
Who the Top End Eliminator OSR (U Cage) suits
For committed track and road racers who compete only in the kneeling position and have good transfer skills. The seller recommends the U cage for more advanced athletes, not for first-time racers.
Figures for comparing
- Weight
- 9.5 kg (20.9 lb)
- Max user weight
- 113.4 kg (250 lb)
The same units on every product, converted from the specifications below. Where a source gives two limits, the lower one is shown.
Top End Eliminator OSR (U Cage) specifications
| Chair weight | 21 lb |
|---|---|
| Max user weight | 250 lb |
| Lower frame width | 11 to 18 in |
| Upper frame width | 10 to 17 in |
| Overall length | 64 to 76 in |
| Rear seat height | 15 to 20 in |
| Frame | 6061-T6 oval aluminium |
| Wheels | 20 in front; 700C or 26 in rear |
| Warranty | Frame 2 years |
| Guide price | About USD 6,299 |
| Maker country | USA |
| Brand | Top End |
| Category | Sports wheelchairs, Racing |
| Catalog ID | MW-029 |
Compared with the source page on 5 October 2026. Details can change, so we confirm them in your quote. Open the source page.
Top End Eliminator OSR (U Cage): common questions
Who is the Eliminator OSR U cage for?
It is recommended for more advanced athletes who race only in the kneeling position. Good transfer skills are needed to get in and out.
How much does the Top End Eliminator OSR cost?
As a guide price, a US retailer listed the U cage version at about USD 6,299. Request a quote for your frame size.
What wheel sizes does the Eliminator OSR use?
It runs a 20 in front wheel with 700C or 26 in rear wheels.
How to get a quote for the Top End Eliminator OSR (U Cage)
Add it to your enquiry list
Press Add to enquiry. You can add other products and parts to the same list.
Tell us your country and needs
Send the list with your country, sizes and any options you want. No payment details are asked.
Get a personal reply
You receive availability, a price and delivery options by email, and decide after that.
Similar to the Top End Eliminator OSR (U Cage)
All Sports wheelchairsJPY 4,380,000-4,680,000 complete set (roughly USD 29,000-31,000 at about 150 JPY/USD)
KAKERU Flagship
Racing. Carbon monocoque racing chair developed by Honda for elite track and marathon athletes.
JPY 1,300,000 complete set (roughly USD 8,700 at about 150 JPY/USD)
IDOMI
Racing. More affordable racing chair pairing a carbon main frame with an aluminium seat frame and fork.
About USD 2,999 (US retailer Med Mart; list USD 3,719)
Pro-2 All Sport
Basketball & multi-sport court. Adjustable entry-level court chair suited to several sports.
Price on request
Elite Series (Elite / Elite X / Elite CX)
Basketball & multi-sport court. Made-to-measure basketball chair built from over 30 athlete measurements, with carbon axle and seating options.
Goes with this product
Parts listed for Top End chairs
All partsTheir source pages name this model or this brand. We confirm the fit for your chair before quoting.
USD 19.99 per 4-pack (Wheelchair Bearings)
608 8 mm ABEC-5 Caster Bearings (4-Pack)
Caster bearings. A four-pack of 608 bearings with rubber seals for caster wheels on an 8 mm axle.
$119 standard, $169 tension adjustable (Sportaid)
Seat Upholstery
Seat upholstery. Replacement seat upholstery for Invacare and Top End wheelchairs, supplied with seat rails.
$377 to $593.30 (Sportaid)
Carbon Fiber Solid Seat Base
Solid seat inserts. Flat carbon fiber seat pan with aluminium mounting hardware that replaces a sling seat on rigid frames.
Guides for this kind of product
Gear · 7 min read
How to choose your first active wheelchair
Your first active chair comes down to three things: frame type, five measurements, and the people who help you get them right.
Gear · 7 min read
Rigid vs folding frame
Rigid frames win on weight and push efficiency. Folding frames win on packing size. The gap is smaller than it used to be, so check real figures.
How-to & Maintenance · 8 min read
How to measure yourself for a wheelchair
A few body measurements, a firm tape and a helper are enough to prepare for a wheelchair order. Here is how to take each one and what it becomes.