Lift chair parts guide 2026: lift chair motor, hand control replacement, lift chair remote, transformer, battery backup, prices and warranty
Lift chair parts from the makers' documents: motors, remotes, transformers, battery backup, frames and fabric, with part numbers, US prices and warranty terms.
Contents
- The short answer
- How we checked, and what we read
- The parts of a lift chair, in the makers' words
- Find the model and serial number before you order
- Safety before you touch anything: unplug, pinch points, children and pets
- Symptoms and the checks the manuals print
- Lift chair hand control replacement: the remote
- The lift chair motor: actuators, types and part numbers
- Power supply and external transformer
- Battery backup parts
- Control boxes, junction boxes and wiring harnesses
- Lift mechanism, scissors, frame and leg levelers
- Fabric, covers, chaise pads and cushions
- Who may replace what, according to the documents
- Warranty by document: motor, frame and fabric
- What lift chair parts cost: two US sellers on 13 November 2026
- Maker parts, look-alike parts and used parts
- Medicare and lift chair parts
- Three traps
- Three composite scenarios
- Questions to ask the seller, provider or maker
- Sources and documents
- Common questions
- Sources
The short answer
Lift chair parts are the pieces of a power lift recliner that wear out or fail on their own: the lift chair motor (an actuator that pushes the lift frame), the hand control or lift chair remote, the external transformer or power supply, the battery backup, the control box and the wiring harnesses, and the steel lift mechanism, scissors and frame under the seat. Fabric, foam and covers sit on top. This guide shows how the makers' own documents name each part, what their manuals tell you to check, who may replace what, what the warranty documents say for each part, and what two US sellers listed the parts at on 13 November 2026.
Mobility Atlas earns a fee or margin when you order through us; the guide below uses only the makers' own manuals, warranty documents and support pages, two US sellers' own pages, a US Consumer Product Safety Commission recall page and Medicare documents, each read on the date we give.
Start with three facts. First, read the model and serial number off the chair, because 62 of the 69 hand control titles we read at one US seller name a chair brand or model. Second, unplug the chair before you reach under it: Golden's PR404 manual says "Do not retrieve fallen objects from inside or under the chair while the chair is plugged into a power source."
Third, check the warranty document for your chair before you pay for a part, because the Pride, Golden, Catnapper and La-Z-Boy documents we read cover motors and other electrical parts for periods from 90 days (Pride's RF wireless pendants) to seven years, the later years as pro-rated discounts, depending on maker, model and part, while their fabric terms are narrower or absent.
Mobility Atlas can find and quote a replacement lift chair part for you, including parts that are not listed on our pages. Our catalog lists no lift chairs or lift chair parts, so send a part request naming the chair maker, the model number, the serial number and the part you need. The process: you send an enquiry or a part request, we reply with a written quote that includes delivery to your country, and nothing is charged before you accept it. You can start from our home, bathroom and daily living page, which lists other equipment for the home.
This is a parts guide. For how lift chairs work, sizes, chair prices, Medicare paperwork and the FDA report data, read our lift chair guide. For the two makers in more depth, read our Golden Technologies guide and our Pride Mobility guide.
How we checked, and what we read
Mobility Atlas read the documents below in a browser, on the dates given, and saved the text of each one with its address and read date. Where a number is our own count or range, a script computed it from the saved text. We did not open or test any chair or part. Nothing here is a lab result.
- Pride Mobility: the US lift chair owner's manual INFMANU3446, Rev Y, June 2025 (24 PDF pages); the Power Lift Recliner Warranty Product Insert, Rev P, May 2022; the VivaLift Ultra PLR-4955 testing and warranty page; and the sheet
"Basic Troubleshooting Instructions: Lift Chairs"
, INFINFB2061, Rev. A, May 2008, which, in our reading, is written mainly for providers (it gives a separate "Canada providers" line). - Golden Technologies: its FAQs page; its Power Lift Recliner warranty LIT-INS-LCWAR 02.19.2021; and the owner's manual of the PR404 lift chair (model PR404-MED-SPC), a Golden document that we read as hosted by the US seller 1800wheelchair.
- Catnapper (Jackson Furniture Industries): its warranty page, which prints a Jackson warranty and a separate Catnapper warranty.
- La-Z-Boy: its Parts & Warranty Information page, and the US Consumer Product Safety Commission (CPSC) page for recall 17-083, power supplies sold with La-Z-Boy lift chairs.
- Sellers, US: Monster Scooter Parts, seven lift chair part collections read from the store's own product data; SpinLife, its lift chair hand controls category and one product page. Monster Scooter Parts' warranty policy page was read on 12 November 2026.
- Medicare, US: CMS LCD L33801 and Policy Article A52518 on seat lift mechanisms, read on 13 November 2026, and the Medicare booklet on durable medical equipment (CMS product 11045), read on 9 November 2026.
We tried to read Med-Lift's own website for this guide, but the page would not load in our browser, so this guide has no Med-Lift document and says nothing about Med-Lift parts or terms. Ask a Med-Lift retailer for the model's parts list and warranty in writing.
Two limits matter. A seller's product title that says a part is "for" a model is the seller's statement, not the chair maker's; we give it as the seller prints it and never extend it to models it does not name. And a manual's line belongs to that manual: Pride's lines below come from INFMANU3446, Golden's from the PR404 manual, unless we say otherwise.
The parts of a lift chair, in the makers' words
Makers use slightly different names for the same parts, and the names on a seller's page follow the maker's. Pride's owner's manual splits a chair into body and electrical parts. It says that "Typically, frame (or body) components include a removable back, chaise pad*, seat, footrest, leg levelers, a lift frame, and scissor mechanisms,"
and that the electrical components "include the external transformer with connection cables, hand control, motor, and batteries"
.
| Part | What Pride's manual says it does | Other names on the pages we read |
|---|---|---|
| Hand control | Contains the controls to operate the chair | Remote, pendant, handwand (Catnapper) |
| Motor | No callout in the manual; its disposal line calls them actuator motors | Lift motor, actuator, seat or back motor |
| External transformer | Connects to an outlet to power the chair | Power supply (CPSC recall page) |
| Batteries | Return the chair to an upright or semi-upright position in a power failure | Battery backup, lithium battery pack |
| Lift mechanism | Positions the chair to recline, sit and stand | Lift mechanism and base (La-Z-Boy) |
| Scissor mechanisms | Take the chair through the stages of recline | Recline mechanism (Golden) |
| Quick-release connector | Lets the user detach the hand control | Quick disconnect |
| Leg levelers | Rotate up or down to stabilize the chair | Leveling legs |
Two more parts appear in Pride's manual and on seller pages. The junction box is where the hand controls of dual motor and infinite position chairs connect, and Pride's harness figure shows the heat connection going to it. The motor control box is the part that the thermal shutoff in the transformer protects from overheating. Pride's troubleshooting sheet INFINFB2061 adds the motor relay box, the T-bracket, the side brackets, the lift/recline bracket and the motor stroke tube and clevis to the list. Golden's PR404 manual names a transformer that takes two 9 volt batteries, a hand control with buttons S1 to S6 on that model, and "Smart Tek" power lights on the hand control, the transformer and the power cord.
Chairs also differ in how many motors they have. Pride's manual separates single motor models from dual motor and infinite position chairs. Golden's FAQs page calls the motors "Comfort Zones" and says models "may include up to five Comfort Zones"
(headrest, lumbar, back, seat and footrest). That matters for parts: a chair with more motors has more motors and cables that can fail, and a hand control with more buttons.
In our view, write the part names from your own manual on a card before you call anyone. Sellers, providers and the maker's service line use those names, and the part number usually follows from the name plus the model number.
Find the model and serial number before you order
Each replacement in this guide starts with the label on the chair. The documents we read put it in different places, and one maker's pages disagree with each other.
- Pride: the manual says the serial number is in two places,
"one is near the rear of the motor on the steel lift frame, the second is attached to the wood frame below the scissor mechanisms,"
and that the model number is printed below the serial number bar code. When you call for service it asks you to have"the model number, serial number, and nature of the problem"
ready. - Golden: the FAQs page says Golden prints the serial number in three places,
"The owner's manual, the lift frame, and the wire on the hand control."
The older PR404 manual says the model and serial number"are located on the back of the hand control and the rear of the lift frame."
The two Golden documents name different places; in our view, check all of them, and read the lift frame label first because both documents name it. - La-Z-Boy: the Parts & Warranty Information page says the Product ID Tag
"is located on the underside of your furniture"
and asks for the acknowledgment number ("ACK/LINE/ITEM"), the style number and the fabric (cover) number, the delivery date and the original receipt. - Catnapper: the warranty page says service claims must come with proof of purchase,
"Bill of Sale and the Products Serial Number"
. For a motor claim it says"The label with the serial number from the defective motor must be returned to receive credit."
Pride's warranty insert adds a detail that helps when you search for parts. It says model numbers "may contain a prefix or suffix (i.e., prefixes LC, NM, or SR; suffixes S, M, L, PW, etc.)"
and that, for the warranty, you should "look for only the numeric portion of your specific model."
In our reading, that is why the seller titles below say "LC-525" in one place and "LC525" in another. A size suffix (S, M or L) can still matter for frame and fabric parts, so give the full model number when you ask for a quote.
Write down four more things before you order: the number of motors (one or two, or more on infinite position chairs), the number of buttons on the hand control and whether it has heat, massage, a USB port or a toggle, the number of pins on the hand control plug if you can see it, and any number printed on the transformer label. The seller titles we read name hand controls by button count, pin count and part number, so those details narrow the search.
Safety before you touch anything: unplug, pinch points, children and pets
A lift chair moves a heavy steel frame with electric motors, close to the floor. The manuals we read print their warnings plainly, and we quote them as printed rather than soften them.
Pinch and crush points
Pride's manual says "The scissor and lift mechanisms are labeled as pinch/crush point hazards on your chair,"
and its warning reads "Do not place objects or appendages in the path of moving parts."
It lists what to keep clear of these points: appendages, small children, pets, wires, oxygen tubes and tanks and portable ventilators, loose items such as clothing and blankets, and electrical power cords. Golden's PR404 manual says "Do not place fingers or hands between the seat cushion and the inside arm of the chair while sitting in the chair or when the chair is in operation or plugged into a power source."
Its care section adds, for owners doing checks: "Be careful of pinch points and sharp metal parts (wear gloves)."
Children and pets under the chair
Pride's manual prints nearly the same line on the product labels page and in the operation section; the operation section reads "Do not place objects under the chair. Make sure area is clear of obstructions, including pets and small children, during operation."
Its warning in the safety chapter reads "Keep children and pets away from the chair when engaging. Entrapment may occur."
Golden's PR404 manual says "Do not operate the chair if there are any persons, pets or other obstructions under or in front of the footrest, under the chair or behind the chair,"
and "Do not allow children to play with or operate the chair at any time."
Its back page warns that the "Leg rest folds down on closing so that a child could possibly be injured."
Unplug before you reach in
Golden's manual says "Do not retrieve fallen objects from inside or under the chair while the chair is plugged into a power source."
Pride's manual says to unplug the power cord before cleaning the external transformer box or the hand control, and, where wiring is damaged, to "unplug the chair and contact your authorized Provider for service."
Its setup section says: "If you discover a problem at any point during the setup and positioning of your chair, stop and contact your authorized Provider immediately. To avoid personal injury and/or product damage, do not plug the unit into the electrical outlet until the problem is corrected and do not attempt to fix electrical problems by yourself."
Pride's manual says "Do not connect an extension cord to the AC/DC converter or the battery charger."
Golden's PR404 manual says "Do not use any type of electrical extension cord to plug your chair into an electrical outlet."
For more on day-to-day safety, see our lift chair guide.
In our view, when a chair is stuck with the footrest or seat raised, do not put a hand or foot under it to free it while it is plugged in. Unplug it, keep children and pets out of the room, and call the provider.
Symptoms and the checks the manuals print
The manuals give owners a short list of checks before a part is blamed. We list them as printed. They are not a repair method, and Pride's manual says that if you do not feel comfortable performing the steps, "contact your authorized Provider for service."
Pride owner's manual, INFMANU3446 Rev Y
- Chair does not operate at all: make sure the transformer is plugged into a properly wired outlet, check the circuit breaker, make sure the low voltage connection cable is plugged into the transformer, and that all cables are connected.
- Chair operates in one direction only: check that the up and down buttons or toggle do not stick. The manual says
"If the buttons or switch are sticking in either position, the hand control may need to be replaced,"
and"Contact your authorized Provider for further assistance."
- Chair stops during a lifting cycle: the manual says an internal thermal shutoff in the external transformer prevents the motor control box from overheating, and to
"allow the chair to remain in a stationary position for 10 minutes to allow the motor to cool, then resume normal operation. If you notice the motors overheating frequently, contact your authorized Provider."
It also lists a power failure with no batteries, or flat batteries, in the transformer. - Dual motor chair does not move at all: the motors may be out of sync; the manual's first step is to check whether
"the pressure-sensitive safety switch has been activated"
(out-of-sync motors show one motor extended farther than the other and "a pinched safety switch"), and its fix is to"Press the hand control in the UP position until your chair reaches the full lift position. This will reset the motor position and correct the timing"
. - Heat and massage do not work: check that the junction box is connected to the transformer, that a green LED on the transformer shows power, and that the heat and massage units and the hand control are connected.
- Chair rocks from corner to corner: adjust the leg levelers where it rocks.
The manual also prints a duty cycle for the motors, "Maximum Duty Cycle: 2 min. ON/18 min. OFF"
. In our reading, a chair moved up and down for long stretches can trip the thermal shutoff without any part being faulty.
Golden PR404 manual
Golden's PR404 manual uses its power lights to split electrical faults from mechanical ones. If the chair does not work and the lights are out, check all electrical connections and that the outlet has power. If there is a problem "and the lights are on, such as mechanical problems or one light is out, discontinue all use of the product upon discovery of the problem,"
and contact the provider, who will ask which light is out.
Pride troubleshooting sheet INFINFB2061, May 2008
This older two-page sheet is, in our reading, written mainly for providers (it gives a separate "Canada providers" line), and it says it "excludes models with Okin motors."
It pairs each symptom with the parts that may cause it. A chair that "has stopped working" lists the transformer, motor, hand control, motor relay box and control box. A chair that "is dropping" lists bent or broken scissors, a bent lift frame, a catching T-bracket, a cracked lift/recline bracket and a broken side bracket pin. A chair that "drops suddenly and will not work"
lists a broken motor clevis, a broken motor stroke tube, a broken lift frame and broken lift/recline brackets. Squeaking lists the scissors, a loose wood frame, bolts too tight or too loose, and the lift frame rubbing on the wood frame.
In our view, a chair that drops, sits crooked or makes a popping noise is not a case for a hand control or motor bought online. The sheet lists frame, bracket and scissor causes for those symptoms, and Golden's manual says to stop using the chair. Stop using it and have the provider inspect it.
Lift chair hand control replacement: the remote
The hand control sits outside the chair and, on the chairs Pride's manual covers, unplugs at a connector. Pride's manual names a "QUICK-RELEASE CONNECTOR" that "Enables the user to detach the hand control from the chair,"
and tells owners to "Keep the hand control locked or utilize the quick-disconnect feature on the standard hand control when the chair is not in use to prevent unintended operation of the chair."
Where the hand control plugs in depends on the chair. Pride's assembly section says "When operating dual motor and Infinite Position chairs, do not connect the push-button or heat/massage hand controls directly to the motor. Connect the hand controls directly to the junction box to prevent equipment damage. For single motor models, hand controls can be connected directly to motor."
In our reading, the manual says where a hand control connects, not whether single and dual motor chairs use different controls; the seller titles below name controls for single motor, dual motor and infinite position chairs separately, so match the title to your chair.
Which lift chair hand control replacement fits my chair? Mobility Atlas read the Pride and Golden manuals and two US sellers' product data on 13 November 2026, and the answer is what the seller or maker prints for your model. On Monster Scooter Parts, 66 of the 69 hand control titles print a part number for the listed part, such as Pride ELEASMB or Golden ZK numbers; two Limoss "Universal" titles print only the numbers they replace, and one Limoss title prints none. 62 titles name a chair brand or model. Pride's manual separates dual motor and infinite position chairs, where the control goes to the junction box, from single motor chairs, where it can go to the motor. So match four things: the maker's part number on your old control or in your manual, the number of motors, the button and pin count, and options such as heat, massage or USB. If the page does not name your model, ask the maker or provider first.
What the seller titles show
We counted the words in the 69 product titles by script. 32 titles name Pride, 14 name Golden, 18 name Mega Motion, 2 name Flexsteel, 1 names La-Z-Boy and 1 names Jackson/Catnapper; a title can name more than one maker. 20 titles mention heat or massage and 9 mention a USB port. 3 titles use the word "Universal"; on the day we read them, 1 of those was marked available.
| Part number in the seller's title | Models the title names | Listed price, 13 November 2026 |
|---|---|---|
| ZK1200-HC-1 / ZK1200-HC (Golden), 2 buttons, USB | Golden Technologies and UltraComfort | $78.99 |
| ZK756HCL (Golden), 6 buttons, infinite position | Golden PR117, PR119, PR502, PR505, PR531, PR535 | $78.99 |
| ELEASMB1030 (Pride), standard | Pride power recliners (no model named) | $78.94 |
| ELE144505 (Pride), 6 buttons | Pride LC525, LC576, LC580, late 2013 and newer | $88.94 |
| ELEASMB7120009 / HSW208C (Pride) | Pride LC521, LC525, LC576, LC580 made before October 24, 2013 | $88.94 |
| CTL2106501 (Pride), 12 buttons | Pride Radiance PLR-3955 series | $88.94 |
| 1.11-370.30 (OKIN), 2 buttons, 5-pin | La-Z-Boy power recliners | $8.92, marked not available |
Two Pride rows show why the date matters: the seller lists one 6-button control for LC525, LC576 and LC580 chairs "Late 2013 & Newer" and another for the same models "Made Before October 24, 2013"
. In our view, read the build date or serial number on your chair before choosing between such rows, and ask the seller which one matches your serial number.
Pride's warranty insert gives a separate term for wireless remotes; it says "All RF Wireless Pendants are covered against breakage by a 90-day warranty from Pride effective from date of purchase. Warranty excludes loss of pendant."
Wired hand controls are in the longer parts lists of the same insert; see the warranty section below.
The lift chair motor: actuators, types and part numbers
In our reading, the lift chair motor is a linear actuator, a motor that drives a rod in and out; the documents we read do not describe how it is fixed to the frame. Pride's owner's manual calls the motors "actuator motors" in its disposal line, and the seller titles we read call them lift motors, base motors, seat motors, back motors and recline motors, some with the actuator maker's name (OKIN DeltaDrive, Limoss, Richmat, Dewert, or HHC model numbers such as LMD6208).
Golden's PR404 manual describes how a lift motor stops: "The motor is set to shut off when it reaches its fully extended or fully retracted position if the selected button is not released."
Pride's manual adds the thermal shutoff and the duty cycle described above. In our reading, a chair that stops at the top or bottom of its travel, or after several minutes of use, may be doing what the manual describes, not failing.
How do I know if the lift chair motor is the problem? Mobility Atlas read Pride's owner's manual, Pride's troubleshooting sheet INFINFB2061 and Golden's PR404 manual, and none of them gives owners a test that proves a motor has failed. Pride's manual tells owners to check the outlet, the circuit breaker, the cables and the transformer, to let the chair rest 10 minutes after a thermal shutoff, and on dual motor chairs to run the chair to full lift to reset motor timing. Pride's troubleshooting sheet lists five possible causes when a chair "has stopped working": the transformer, motor, hand control, motor relay box and control box. Golden's manual uses its power lights: lights out points to connections, lights on with a fault means stop using the chair and call the provider. So, in our view, do the printed checks, then let the provider or the maker's technical line name the failed part before you buy a motor.
Single, dual and infinite position chairs
Pride's troubleshooting sheet says to "Always install the new motor bottom/base first and have the lift chair in the full recline position, if possible."
That sheet is a 2008 document that, in our reading, is written mainly for providers, and it excludes chairs with Okin motors; none of the four Pride documents we read tells owners to change a motor themselves. On a dual motor chair, the seller titles show two different parts, a base or seat motor and a back motor, and the titles name them as separate parts.
What the seller listed, 13 November 2026
Monster Scooter Parts' lift chair motor collection returned 29 products. 6 titles name OKIN, and one each names Limoss, Richmat and Dewert. Leaving out the massage vibrator motors and the motor fork head, 26 products are motors that move the chair; their listed prices ran from $89.95 to $333.04, and the 21 marked available ran from $99.99 to $333.04. 2 of the motor listings are titled "Blemished" or "Damaged".
| Part number in the seller's title | Models the title names | Listed price |
|---|---|---|
| MOT1707192, seat base motor | Pride VivaLift Atlas, Elegance, Legacy, Metro, Perfecta, Sierra, Tranquil, Urbana, Voya; Mega Motion MM-3702 | $115.74 |
| MOT1707191, back motor, blue 5-pin connector | Pride VivaLift and Mega Motion MM-3702 | $116.80 |
| MOT2007074 / MOT1609899, Limoss base lift motor | Pride Infinity and Oasis; Mega Motion NM series | $128.99 |
| DRVMOTR1361, base motor | Pride Infinity series | $237.75 |
| DRVMOTR1139, Dewert Megamat Plus | Pride LL-660/LL-670 and LL-770 | $333.04 |
| GM1450-LM, Richmat HJA58 lift motor | Golden MaxiComfort, Signature and UltraComfort | $223.98 |
| GM756R, recline motor | Golden MaxiComfort Comforter PR505, PR535; Cloud PR510 | $268.20 |
| GMOKI-28W, OKIN DeltaDrive lift motor | Golden Comforter Wide, MaxiComfort Wide; UltraComfort Montage | $277.75 |
The warranty documents treat the motor as an electrical part with its own term. Catnapper's page says "The motor for a Pow'r Lounger or Pow'r Lift product features a three (3) year warranty against defects."
La-Z-Boy's table gives "Electrical Parts and Motors"
three years of parts coverage and one year of labor. Golden lists the motor among its electrical parts, and Pride's insert lists it among its warranted parts; see the warranty section below.
Power supply and external transformer
The transformer, which the CPSC recall page calls a power supply, turns house current into the low voltage the motors use. Pride's manual says the chair has "a low voltage DC electrical system that reduces the standard household alternating current of 100V AC - 240V AC to direct current (24/39V DC)."
Golden's PR404 manual says to plug the transformer into "a 115-120V 60Hz A.C. outlet"
.
Where it goes and what the manuals warn
- Pride's manual says
"Do not cover or place the external transformer under the chair. Keep in an open, well-ventilated area free from foreign material and away from possible pinch points."
- Pride's manual says
"The external transformer should always be positioned so that the product specification information/name plate faces down. Improper placement may result in product or property damage."
- Pride's manual says
"Do not place anything (for example, a drinking glass) on top of or near the external transformer."
- Pride's manual says the transformer may have a green LED to show power, and its thermal shutoff switch is
"located inside the external transformer"
. - Golden's PR404 manual says the transformer goes on the floor behind the chair, and power indicator lights on the transformer and the motor cord
"illuminate green constantly"
when there is power.
In our view, the transformer's label is a good guide to a replacement. The seller titles we read name transformers by voltage, maker and part number, and by whether a battery backup is built in.
| Part number in the seller's title | Models the title names | Listed price |
|---|---|---|
| ELE1707199, 29 volt, lithium backup battery | Pride VivaLift and Mega Motion | $138.94 |
| CTL1707200, 29 volt, without battery | Pride VivaLift and Mega Motion | $128.99 |
| CTL2104331 | Pride VivaLift Ultra (PLR-4955); Mega Motion iNFI Immerse (MM-8955) | $131.76 |
| GM1400-TR, Richmat 1400 | Golden Comforter, Signature, Traditional and Value | $88.94 |
| GM2102-TR-PK, OKIN SP2-B2 PD18 | Golden Technologies and UltraComfort | $113.99 |
The collection returned 15 transformers, listed from $10.50 to $209.99; 11 were marked available. 3 titles name a battery backup or backup battery, and a fourth (CTL1707200) says "without Battery". Wall-to-transformer power cords are separate parts on the same store; in the cable collection, the 5 price lines whose titles name an IEC C7 cord ran from $3.75 to $6.99.
The La-Z-Boy power supply recall, 2017
We saved one CPSC recall page for a lift chair part. Its page, recall number 17-083 dated February 08, 2017, says "The lift chair's power supply cover can crack within the screw housing and break, causing the cover to detach and expose the power supply's electrical components, posing a shock hazard to users."
It covers power supplies sold with La-Z-Boy Gold Series lift chairs, the Clayton Luxury-Lift (Model 1HL562) and Power Lift (Model 1ML562) and Luxury-Lift Models 1LF505 and 1LF819, and in conversion kits for older chairs, and says "Only power supplies with LOT #150113 are included in this recall."
The remedy on the page reads "Consumers should immediately stop using the power supplies to power the lift chairs and contact La-Z-Boy for a free replacement power supply."
The page also says the power supplies "were also sold separately for about $170"
. Our lift chair guide lists two more CPSC recalls of lift chair parts, for hand controls and for battery packs, and the FDA records; check a remote or battery pack against those before buying it used.
Battery backup parts
A battery backup lets a chair return from recline when the power fails. The documents we read describe two kinds, and they are different parts.
- 9 volt batteries in the transformer. Pride's manual says the system uses
"two 9V batteries (not included)"
and that"the battery back-up system does not recharge itself."
It defines fresh batteries as 9V alkaline batteries"replaced every time the battery back-up system is activated during a power failure, or once every six (6) months if the battery back-up system has not been activated,"
and recommends heavy duty or industrial strength alkaline or non-rechargeable lithium-ion 9V batteries. Golden's PR404 manual says"Batteries should be replaced after one use. Batteries should be changed yearly."
- A lithium-ion battery pack on the transformer, which Pride's manual has owners swap with the transformer unplugged, sliding the new pack on
"until it clicks into place."
Both manuals limit what a backup does. Pride's says "Battery back-up is intended to return a reclined chair to a seated position one time during a power outage."
Golden's says the batteries "do not have enough energy nor are they intended to operate the chair for a prolonged period of time"
without house power.
The warranty terms for backup parts are short. Pride's insert says "The lithium-ion battery pack is covered by a twelve (12) month (1 year) warranty."
La-Z-Boy's table lists "Battery Pack (088BP1, 088BP2)"
with one year of parts coverage and no labor coverage. At Monster Scooter Parts, one transformer title names its battery: ELE1707199 includes a lithium backup battery (ZB-B1500-3S) for Pride VivaLift and Mega Motion chairs at $138.94, and the OKIN SP2-B transformer with battery backup (ELEINDV1069), titled for Pride lift chairs, was listed at $86.99.
For what to do in a power cut and how backup choice affects buying a chair, see the battery section of our lift chair guide.
Control boxes, junction boxes and wiring harnesses
Between the transformer and the motors there are boxes and cables that fail less visibly. Pride's troubleshooting sheet lists the control box and the motor relay box among the causes of a chair that has stopped working, and says to "Ensure that the dip switch in the standard control box is in the correct position. Otherwise, the lift chair may not respond correctly to the hand control selections."
Cables that get pinched
The steel lift frame can crush a cable. Pride's setup steps say to "Position the low voltage connection cable where it will not be pinched between the frame and the lift mechanism."
Pride's troubleshooting sheet says to "Examine the power connection cable from the control box to the transformer for crimps, cuts, or cracks. If the power connection cable is damaged, replace the power cable and/or the external transformer if needed."
Golden's PR404 manual warns that "the metal lift frame mechanism could crush"
electrical products and wires near the chair "and create a fire hazard and/or may cause personal injury."
The owner's side of this is inspection, not repair. Pride's care section says "Inspect all wiring harnesses to make sure they are not damaged or frayed,"
and "If damage is present, unplug the chair and contact your authorized Provider for service."
Golden's says "Periodically inspect all wiring harnesses to make sure they are not cut, damaged, frayed, or disconnected. If damage of any type is present, unplug the lift chair and contact your provider."
Pride's warning on dampness adds "Check electrical components frequently for signs of corrosion and replace as necessary."
What the seller listed
The control and junction box collection returned 18 products, listed from $76.00 to $246.53, with 13 marked available. The cable collection returned 22 products with 26 price lines (some come in lengths), listed from $3.75 to $71.49; the 22 lines marked available ran from $3.75 to $54.99.
| Part number in the seller's title | What and for which models, as titled | Listed price |
|---|---|---|
| CTL1707193 / CM310 | Motor control box, Pride VivaLift, Mega Motion and Flexsteel | $87.71 |
| ELE132831 | Infinite position motor control box, Pride Infinity collection | $98.94 |
| GM3700-CB | Control box, Golden PR535-MXW, PR535-LXW, PR535-M26 | $76.00 |
| ELEINDV1071 | Heat and massage junction box, Pride lift chairs | $139.72 |
| ELE137801 | 5-pin hand control extension cable, Mega Motion and Pride | $22.99 |
| HARUSHD2539 | 112 inch connection cable, Pride dual infinite motors | $50.98 |
In our view, a cable that is cut or crushed is a sign to look at why: Pride's and Golden's manuals both point to the lift frame. Replacing the cable without moving it out of the frame's path can repeat the damage.
Lift mechanism, scissors, frame and leg levelers
The heavy parts under the seat carry the longest warranties in the documents we read, and Pride's manual gives owners one job on them, the leg levelers. Pride's manual says "The scissor and lift mechanisms are labeled as pinch/crush point hazards on your chair,"
and its troubleshooting sheet ties dropping, sitting crooked, squeaking and popping to scissors, brackets, bolts and the lift frame.
What the warranty documents say
- Pride's insert, Rev P/May 2022, says
"Pride offers a lifetime warranty on the lift and scissor mechanisms and lift frame,"
for"as long as the chair is in use by the original owner,"
and says it"covers the lift and scissor mechanisms against metal fatigue, defective welds, and bushings."
It adds that"Pride reserves the right to replace only the part of the lift and scissor mechanism, scissor(s) or lift frame that may be defective from workmanship,"
and that the lifetime term does not extend to models 102, 105, 106, 107, 250 and 358XXL. - Golden's LIT-INS-LCWAR 02.19.2021 says it gives a limited lifetime warranty on the
"Lift Mechanism, Recline Mechanism and Wooden Chair Frame"
for the original consumer, with labor to replace them"subsidized on all models for three years from date of original purchase."
- Catnapper's page: recliner mechanism, springs and frame each carry a limited lifetime warranty; the frame clause covers the frame
"upholstered in the original fabric under normal use and conditions"
. - La-Z-Boy's page: "Lift Mechanism and Base" three years of parts and one year of labor (one year and one year for Luxury-Lift 2BL styles); reclining mechanism parts lifetime with one year of labor, except Luxury-Lift 2BL styles (one year) and Luxury-Lift 1HM, 1PH, 1PL, 1PM, 3BL and 4LP styles (three years); wood frame parts lifetime with one year of labor, except 13 listed styles at five years.
Two warranty documents tie the warranty to weight. Pride's insert says "Exceeding the weight capacity voids your power lift recliner warranty."
Golden's says "No warranty, express or implied, applies to any condition resulting from exceeding the weight capacity of the product"
. Golden's PR404 manual prints a capacity of 375 lbs. for the PR404-MED-SPC.
What the seller listed
Monster Scooter Parts' frame parts collection returned 8 products with 9 price lines, from $2.77 to $507.28. They include a scissor spring for Pride lift chairs at $2.77, a bronze bushing at $3.99, non-skid leg levelers for Pride, VivaLift and Mega Motion chairs titled "(Set of 4)" at $30.00, a scissor mechanism for 3-position Pride lift chairs sold as Left ($63.52) or Right ($64.79), a left scissor mechanism for Pride infinite position chairs at $127.39, and two lift frame assemblies, one for the Mega Motion NM2750 at $467.10 and one titled for Pride lift chairs (FRMASMB13778) at $507.28.
Pride's manual gives owners one frame job: the four leg levelers "Manually rotate up or down to stabilize the chair before use,"
and a chair that rocks from corner to corner needs them adjusted. In our view, a bent scissor, a cracked bracket or a lift frame part is a job for the provider: the chair is heavy, the parts are pinch points, and Pride's and Golden's lifetime terms run through the provider and the original owner.
Fabric, covers, chaise pads and cushions
Fabric is where the four makers' documents we read differ widely. Owners shopping for a replacement cover should read these lines before anything else.
- Pride's insert says
"This warranty does not extend to fabric."
- Catnapper's page excludes
"Any defect in upholstery fabrics. There is no warranty on vinyl, leather or fabric against wearing, fading, pilling, stretching, dye lots, natural markings or splitting."
Its Comfort Coil seat cushions are warranted for five years"against loss of resiliency"
. - La-Z-Boy's table says fabric gets one year of parts coverage, which
"applies to seam failure, fabric separation and nap loss"
, and leather one year for"manufacturing or material defects"
, which"does not cover dye lot match or fading."
- Golden's LIT-INS-LCWAR 02.19.2021 prints no fabric term in the text we read, but says
"Replacement fabrics may vary in color from the original due to dye lot differences."
Golden's older PR404 manual says"Fabric shading cannot be guaranteed for replacement parts or replacement chairs."
Pride's manual explains a seat part designed to come off, the chaise pad: it "Attaches to the chair with reusable fasteners to make servicing the chair more convenient."
It says "The chair must be in the recline position in order to remove or attach the chaise pad,"
and on heat and massage chairs "you must also disconnect the heat and massage connections before removing the chaise pad."
Its warning before sitting: make sure "the chaise pad is flat and free from wrinkles, debris, and bunching."
Pride's troubleshooting sheet lists foam or fabric that is too large for the ottoman, a chaise pad that "needs to be repositioned on reusable fasteners"
and foam breaking down as causes of a bunching seat.
For care, Pride's manual says "Inspect the fabric on a regular basis for any pulls, tears, or gaps,"
recommends a "manufacturer-approved Crypton cleaning kit,"
and says "Do not saturate the fabric."
Its warning: "Fabric should not be allowed to come in direct contact with any type of heat source (e.g., a space heater or lit tobacco products)."
Golden's FAQs page says cleaning instructions "vary depending on the fabric"
and to refer to the owner's manual for fabric-specific care.
Replacement fabric parts are tied to the chair's cover code. La-Z-Boy's page asks for the fabric number, which it labels COVER on the Product ID Tag. The one seat-protection part in Monster Scooter Parts' lift chair accessories collection was a protective seat pad for Pride lift chairs (ACCASMB2514) at $47.29. In our view, ask the maker or retailer for a part quote that names the cover code and the chair size suffix, and expect a color difference from the dye lot, as Golden's documents say.
Who may replace what, according to the documents
No document we read gives owners a full list of parts they may change. What they do say is clear enough to sort the parts into three groups.
Jobs the manuals describe for owners
- Fitting the 9V batteries or swapping the lithium battery pack on the transformer, with the transformer unplugged (Pride's manual; Golden's PR404 manual for 9V batteries).
- Connecting the hand control and the heat and massage harnesses at setup, including the rule about the junction box on dual motor and infinite position chairs (Pride's manual).
- Adjusting the leg levelers (Pride's manual; Golden's PR404 manual).
- Checking plugs, outlets, cables and harnesses, and resetting dual motor timing by running the chair to full lift (Pride's manual).
- Removing and attaching the chaise pad with the chair reclined (Pride's manual).
Jobs the documents send to the provider or retailer
Pride's manual says "Use only manufacturer parts for all repairs and replacements,"
and "Your chair will require routine maintenance checks. You can perform some of these checks, but others may require assistance from an authorized Provider."
For damage to wiring, Pride and Golden both say to unplug and call the provider. Golden's PR404 manual is direct: "Do not open any of the electrical components. There are no serviceable parts,"
and "Warranty will be void if any of the electrical components are opened by other than a qualified service person."
Golden's FAQs page answers "Are parts available or replaceable?"
with "Yes. Please contact your retailer to order replacement parts or optional accessories for your recliner."
Changes the documents forbid without approval
Pride's purchaser's agreement says that by accepting delivery "you promise that you will not change, alter, or modify this product or remove or render inoperable or unsafe any guards, shields, or other safety features,"
and its safety chapter says "Unauthorized modifications may lead to personal injury and/or product damage and may also void your product's warranty."
La-Z-Boy's page says its "products may not be altered by any person, dealer, or company without the express written authorization of La-Z-Boy."
La-Z-Boy is the one maker page we read that names self-repair: when you call, "You will also be asked if you would like to order parts to make the repairs yourself,"
and it notes parts orders carry a shipping fee.
In our reading, a plug-in hand control or a transformer battery is within what the Pride and Golden manuals let owners handle, while motors, control boxes, frames and anything that means opening an electrical part sit with the provider. Catnapper's page routes warranty service claims "through the retail dealer where the furniture was purchased."
Warranty by document: motor, frame and fabric
Each line below belongs to one document. A maker's terms can differ by model and by date, so read the insert or card that came with your chair.
| Document | Lift mechanism and frame | Motor and electrical parts | Fabric | Labor |
|---|---|---|---|---|
| Pride insert, Rev P/May 2022 | Lifetime, original owner (not 102, 105, 106, 107, 250, 358XXL) | Heritage, Infinity, Oasis: 4 years, then 25, 15, 5% off | Not covered | Not covered unless authorized in advance |
| Golden LIT-INS-LCWAR 02.19.2021 | Limited lifetime, original consumer | 3 years, then 35, 25, 15, 5% off | No term printed | Subsidized 3 years (frame), 1 year (electrical) |
| Catnapper warranty page | Frame, recliner mechanism and springs lifetime; the page names no lift mechanism (unlisted parts: 1 year) | Motor 3 years; transformers, handwands 1 year | Excludes any defect in upholstery fabrics | Covered for one year |
| La-Z-Boy parts and warranty page | Lift mechanism and base 3 years (2BL: 1 year); wood frame lifetime (some styles 5 years); Luxury-Lift recline mechanism 1 to 3 years | Electrical parts and motors 3 years | One year (seams, separation, nap loss) | One year on mechanism, frame and electrical lines |
Does the warranty pay for a replacement lift chair motor or hand control? Mobility Atlas read four makers' warranty documents on 13 November 2026, and the answer depends on the document, the year and who owns the chair. Pride's insert covers the motor and hand control for four years on its Heritage, Infinity and Oasis collections, then gives 25, 15 and 5 percent off the suggested retail price in years five to seven; on model 105 the term is one year, on model 250 two years. Golden's covers them for three years, then 35, 25, 15 and 5 percent off in years four to seven. Catnapper's covers the motor three years and handwands one year; La-Z-Boy's covers electrical parts and motors three years. Labor and shipping are limited or excluded in each of the four, and each names the original purchaser, owner or consumer. Ask the seller for the warranty card before you pay.
Golden prints a worked example of its pro-rated terms: "By way of example, a part costing $100.00 that needs replacement in year 4 would cost $65.00."
Pride's insert gives its discounts as "off suggested retail price"
and says "Pride is not responsible or obligated to pay for labor, service calls, shipping, and/or any other charges incurred for repair of the product."
Golden's says "Warranty claims should always be filed with the retailer you purchased the product from,"
and "All warranty claims must be approved by Golden Technologies before any warranty service is performed."
Parts bought elsewhere can affect a claim. Pride's insert says "Any warranty claims for electronic assemblies may become void if damage results from the use of parts/accessories that are not Pride original parts and are not purchased through an authorized Pride provider."
Golden's says repairs are covered provided the parts "have not been altered or repaired by unauthorized representatives."
Catnapper's says its warranties do not apply to merchandise "purchased 'as is' or second-hand"
. Pride's VivaLift Ultra PLR-4955 page prints "7-year prorated warranty" and links the Rev P insert. The insert's seven-year heading names the Heritage, Infinity and Oasis collections, not VivaLift; until Pride confirms in writing which schedule applies to a VivaLift chair, plan on the shorter terms. For warranty terms across each maker's chairs, see our Golden Technologies guide and Pride Mobility guide.
What lift chair parts cost: two US sellers on 13 November 2026
Prices checked November 2026. We read two US sellers on 13 November 2026. Monster Scooter Parts sorts lift chair parts into collections by part type and by chair brand; we read the seven part-type collections linked from its "lift chair" search page, not the brand collections, using the store's own product data for each collection, which lists every product with its price, the store's SKU and an available flag. SpinLife lists lift chair parts under one subcategory, Hand Controls, which printed "7 Total Items". Prices differ by country, seller and date, and the prices below are US list prices before tax, shipping or any coupon code.
The table gives, for each Monster Scooter Parts collection, the number of products, the number of price lines (some products come in lengths or sides), the range over every price line, and the range over the lines marked available. Our script counted every line; nothing was dropped.
| Collection | Products | Price lines | Range, all lines | Marked available | Range, available |
|---|---|---|---|---|---|
| Hand controls | 69 | 71 | $8.92 to $414.98 | 53 | $10.12 to $414.98 |
| Motors | 29 | 29 | $12.99 to $333.04 | 24 | $12.99 to $333.04 |
| Transformers | 15 | 15 | $10.50 to $209.99 | 11 | $10.50 to $209.99 |
| Control and junction boxes | 18 | 18 | $76.00 to $246.53 | 13 | $76.00 to $246.53 |
| Cables | 22 | 26 | $3.75 to $71.49 | 22 | $3.75 to $54.99 |
| Frame parts | 8 | 9 | $2.77 to $507.28 | 9 | $2.77 to $507.28 |
| Accessories | 2 | 3 | $47.29 to $378.71 | 3 | $47.29 to $378.71 |
Across the seven collections that is 163 products and 171 price lines, 135 of them marked available. The low ends are small parts and generic pendants, such as an OKIN 2-button hand control (1.11-370.30) titled for La-Z Boy power recliners at $8.92 (marked not available) and a scissor spring at $2.77; the high ends are a deluxe heat and massage hand control with control box for single motor Pride chairs at $414.98 and a Pride lift frame assembly at $507.28.
SpinLife's hand controls
SpinLife's category showed 7 hand controls, 6 by Golden Technologies and 1 by Pride, from $100 to $160. The tiles print no part numbers, so we tie a SpinLife price to a part number only where we read the product page. One product page, "2-Button Hand Control for Golden Lift Chairs", printed "(Model No. ZK1200-HC-1)" and $125.00, with "Ships in: 5-7 business days"
.
The same part at two sellers
The Golden control printed as ZK1200-HC-1 at both sellers (both print ZK1200-HC-1; SpinLife's Overview tab says the control has a "built-in USB port" and names the Cambridge PR-401, Monarch PR-355 and Comforter PR-501 and PR-501 HD, while Monster Scooter Parts' title names Golden Technologies and UltraComfort power recliners) was $125.00 at SpinLife and $78.99 at Monster Scooter Parts on 13 November 2026, a difference of $46.01, or 58 percent above the lower price, by our computation. Monster Scooter Parts' title reads "ZK1200-HC-1 / ZK1200-HC" and names Golden Technologies and UltraComfort power recliners. In our view, compare the same part number, then add shipping and check each seller's return terms before choosing.
Seller warranties are separate from the chair maker's. Monster Scooter Parts' warranty policy page, read on 12 November 2026, says items not named elsewhere on the page "shall be free from defects in material and workmanship for a period of 30 days from the date of receipt,"
and "This warranty does not provide for the return of used items due to incompatibility with your application."
In our reading, a part that turns out not to fit, once used, may not go back under that policy, so confirm the fit before you plug it in.
Maker parts, look-alike parts and used parts
The seller collections we read mix three kinds of parts, and the warranty documents treat them differently.
- Parts titled with what the seller presents as the chair maker's part number, such as Pride ELEASMB and CTL numbers or Golden ZK, GM and HV numbers. A part number in a seller's title is the seller's statement; in our reading it does not show that the part is a Pride or Golden original, and Pride's insert says electronic claims
"may become void if damage results from the use of parts/accessories that are not Pride original parts and are not purchased through an authorized Pride provider."
Ask the seller in writing. - Parts titled as universal or as made by the actuator or control maker, such as OKIN and Limoss pendants and transformers. 3 hand control titles use "Universal"; two of them say they replace named Pride or Golden controls (ELEASMB5285, ELEASMB7337 and KIT120002 for Pride; ZK1200-HC for Golden). Both of those were marked not available when we read them.
- Listings titled "Used", "Blemished" or "Damaged". The motor collection had 2 blemished or damaged listings and the control box collection had one used control box (ELEASMB6237, $83.99, marked not available).
Pride's insert states what a non-original part can do to a claim: "Any warranty claims for electronic assemblies may become void if damage results from the use of parts/accessories that are not Pride original parts and are not purchased through an authorized Pride provider."
Its list of exclusions also names "Parts/accessories that are not Pride original parts and are not purchased through an authorized Pride provider."
Golden's warranty covers parts that "have not been altered or repaired by unauthorized representatives,"
and Golden's FAQs page sends parts orders to the retailer.
The seller's store data has a "vendor" field. In the rows we read, it sometimes names the chair maker and sometimes names the store itself, for example on a Pride hand control. In our reading, that field is not proof of who made a part. Ask the seller in writing whether the part is new, whether it is the chair maker's part or a replacement made by another company, and what warranty comes with it.
In our view, inside the chair maker's warranty period, buying the maker's part through the provider keeps the claim simple. After the warranty, a part that matches the maker's part number on a seller's title is a smaller risk than a look-alike chosen by button count alone.
Medicare and lift chair parts
In the US, CMS Policy Article A52518 (revision effective 07/02/2023) says the supplier may bill the seat lift mechanism "using E0627 or E0629, and bill A9270 for the chair"
; in our reading, Medicare's rules cover the mechanism, not the chair. The Medicare booklet says "If you own Medicare-covered DME and other devices, Medicare may also cover repairs and replacement parts,"
that "the supplier who sold it to you isn't required to repair it,"
and, for rented equipment, "your supplier must maintain and repair the equipment"
; see our lift chair guide for the criteria, costs and paperwork.
Three traps
Trap one: buying a remote by its looks. Two Pride rows at the same seller name the same three models (LC525, LC576, LC580; the older row adds LC521) and are split by build date, "Late 2013 & Newer" against "Made Before October 24, 2013"
. Pride's manual also separates single motor chairs, where the hand control may plug into the motor, from dual motor and infinite position chairs, where it must go to the junction box. Match the part number, the build date and the motor count, not the picture.
Trap two: paying for a part the warranty would have covered. The four warranty documents we read cover motors and electrical parts for periods from 90 days (Pride's RF wireless pendants) to seven years, the later years as pro-rated discounts, depending on maker, model and part, with the pro-rated discounts in the later years for Pride and Golden. A part bought from a seller and fitted by a family member may also affect a claim under Pride's insert. Find the warranty card and the purchase date first.
Trap three: treating a dropping chair as an electrical fault. Pride's troubleshooting sheet lists bent or broken scissors, a bent lift frame and cracked brackets among the causes of a chair that drops, and Golden's manual says to "discontinue all use of the product upon discovery of the problem"
when a mechanical problem shows with the lights on. A new hand control will not fix a cracked bracket. Stop using the chair and have the provider look at the frame.
Three composite scenarios
These are composite scenarios, not individual customers. Each uses only the documents of the chair it describes and the seller pages we read on 13 November 2026.
Scenario one: a Pride VivaLift chair that only goes one way
A Pride VivaLift Standard chair raises but will not lower. Pride's manual says to check that the up and down buttons do not stick and that "If the buttons or switch are sticking in either position, the hand control may need to be replaced."
The owner unplugs the chair, finds the model and serial numbers on the steel lift frame near the motor, and finds the old control's part number. At Monster Scooter Parts, CTL1707190, a 10-button control titled for Pride VivaLift Standard and Version 2 power recliners, was listed at $58.94. That listing names only VivaLift Standard and Version 2 chairs; a second listing with the same number, CTL1707190, at $58.94 is titled for Pride VivaLift, Mega Motion and Jackson/Catnapper Warner recliners. The owner matches the part number on the old control before ordering. Until a working control is fitted, the chair stays unused. Pride's manual adds "Contact your authorized Provider for further assistance."
Because Pride's insert says electronic claims "may become void if damage results from the use of parts/accessories that are not Pride original parts and are not purchased through an authorized Pride provider."
the owner first asks the provider whether the chair is still inside its warranty years.
Scenario two: a Golden PR404 with one light out
A PR404-MED-SPC stops partway, and one of the green Smart Tek lights is out. Golden's PR404 manual says that with a problem "and the lights are on, such as mechanical problems or one light is out, discontinue all use of the product upon discovery of the problem,"
and to contact the provider with the model and serial number. The owner stops using the chair and calls the retailer. The warranty printed in the PR404 manual covers the electrical parts for three years from the original purchase by a consumer, with labor subsidized for one year, then gives 35, 25, 15 and 5 percent off suggested retail price in years four to seven. The PR404 manual says the electrical components have "no serviceable parts", so the owner does not open the transformer.
Scenario three: a La-Z-Boy Luxury-Lift with power supply lot 150113
An owner of a Clayton Luxury-Lift, Model 1HL562, reads the back of the power supply and finds LOT #150113. The CPSC recall page says "Consumers should immediately stop using the power supplies to power the lift chairs and contact La-Z-Boy for a free replacement power supply."
The owner unplugs the power supply, stops using the chair's power functions, and calls La-Z-Boy (the 2017 recall page gives 855-592-9087, 9 a.m. to 5 p.m. ET weekdays; the number may have changed). For later faults, La-Z-Boy's page lists three years of parts coverage for electrical parts and motors, with one year of labor, and names exceptions such as Bronze 2BL Luxury-Lift electronics at one year.
Questions to ask the seller, provider or maker
Ask these in writing and keep the answers with the chair's papers. Whether a lift chair still suits the person using it, and whether it should be replaced rather than repaired, is a question for their physician or physical therapist, and Pride's manual names the user ("if capable of making such a decision"
), the provider and/or the healthcare professional as the people who choose the chair.
- What is the maker's part number for this part on my model and serial number, and does your page name my model?
- Is the part new, used or blemished, and is it the chair maker's part or another company's replacement?
- Does my chair have one motor, two motors or more, and does this hand control connect to the motor or to the junction box?
- Is my chair still inside the maker's warranty years for this part, and who files the claim: the provider, the retailer or me?
- Who pays labor, service call and shipping costs under my warranty document?
- Will fitting this part myself, or buying it outside the provider, affect my warranty?
- What is your return policy if the part does not fit, and does it change once the part has been plugged in?
- For fabric: what is the cover code, and can you match the dye lot?
- Does my power supply or transformer carry a lot or model number named in a recall?
If you want a second quote, send Mobility Atlas a part request with the same details. We reply with a written quote that includes delivery to your country, and nothing is charged before you accept it.
Sources and documents
How we checked: each page or PDF was saved as text with its address and read date, PDFs were extracted in the browser, and the counts, ranges and the price difference were computed by script from the saved text. Seller prices come from the stores' own pages and product data; part fitment is given only as the seller or maker prints it. We could not load Med-Lift's website.
Prices checked November 2026: Monster Scooter Parts and SpinLife (US), 13 November 2026; Monster Scooter Parts warranty policy, 12 November 2026.
Documents checked November 2026: Pride, Golden, Catnapper and La-Z-Boy documents, the CPSC recall page and CMS LCD L33801 and Article A52518, 13 November 2026; the Medicare booklet 11045, 9 November 2026.
This article is general information. Rules and prices differ by country and change, so confirm them before you buy or travel.
Common questions
Can I replace a lift chair remote myself?
On the chairs covered by Pride's US manual and Golden's PR404 manual, the hand control unplugs. Pride's manual describes a quick-release connector that "Enables the user to detach the hand control from the chair,"
and its setup steps have owners connect the hand control. Pride's manual also says that on dual motor and infinite position chairs the hand control must connect to the junction box, not the motor. Use the maker's part number for your model, and check your warranty first, because Pride's insert says electronic claims "may become void if damage results from the use of parts/accessories that are not Pride original parts and are not purchased through an authorized Pride provider."
How much does a lift chair motor cost?
On 13 November 2026 Monster Scooter Parts (US) listed 26 lift chair motors from $89.95 to $333.04, leaving out massage motors and a fork head (the $89.95 listing is titled "Damaged" and was marked not available; the 21 available motors ran from $99.99, a "Blemished" listing, to $333.04). Prices differ by country, seller and date. If your chair is inside its warranty years, the motor may be covered: Catnapper's page gives its Pow'r Lift motors three years, La-Z-Boy's gives electrical parts and motors three years, Golden lists motors on a seven-year pro-rated schedule, and Pride does for its Heritage, Infinity and Oasis collections.
Why does my lift chair stop halfway up?
Pride's manual says an internal thermal shutoff in the transformer can stop the chair, and to let it rest 10 minutes before using it again, and "If you notice the motors overheating frequently, contact your authorized Provider."
It also lists a power failure with no or flat backup batteries. Golden's PR404 manual says that with a problem "and the lights are on, such as mechanical problems or one light is out, discontinue all use of the product upon discovery of the problem,"
and to contact the provider. A chair that drops needs the provider to inspect the frame; for a chair that sits crooked, Pride's sheet also lists leveling legs, uneven ground and motor timing.
Where is the serial number on a lift chair?
Pride's manual says near the rear of the motor on the steel lift frame and on the wood frame below the scissor mechanisms. Golden's FAQs page says the owner's manual, the lift frame and the wire on the hand control. La-Z-Boy's page says the Product ID Tag is on the underside of the furniture.
Does the warranty cover lift chair fabric?
Not under Pride's insert, which says "This warranty does not extend to fabric."
Catnapper's page excludes "Any defect in upholstery fabrics."
La-Z-Boy's table gives fabric one year for seam failure, fabric separation and nap loss. Golden's 2021 warranty prints no fabric term in the text we read and says replacement fabrics may vary in color due to dye lot differences.
Will Medicare pay for lift chair parts, and do prices differ by seller?
In the US, CMS rules address the seat lift mechanism (E0627 or E0629), and Article A52518 says the supplier may bill A9270 for the chair. The Medicare booklet says "If you own Medicare-covered DME and other devices, Medicare may also cover repairs and replacement parts"
; in our reading, that means the seat lift mechanism, not the chair billed as A9270; after the Part B deductible you pay 20% of the Medicare-approved amount if the supplier accepts assignment. Prices do differ: the control printed as ZK1200-HC-1 at both sellers (both print ZK1200-HC-1; SpinLife's Overview tab says the control has a "built-in USB port" and names the Cambridge PR-401, Monarch PR-355 and Comforter PR-501 and PR-501 HD, while Monster Scooter Parts' title names Golden Technologies and UltraComfort power recliners) was $125.00 at SpinLife and $78.99 at Monster Scooter Parts on 13 November 2026. For Medicaid, VA or private plans, ask the plan.
Sources
- Pride Mobility: US lift chair owner's manual, INFMANU3446 Rev Y, June 2025 (read 13 November 2026)
- Pride Mobility: Power Lift Recliner Warranty Product Insert, Rev P, May 2022 (read 13 November 2026)
- Pride Mobility: VivaLift Ultra PLR-4955 testing standards and warranty page (read 13 November 2026)
- Pride Mobility: Basic Troubleshooting Instructions, Lift Chairs, INFINFB2061 Rev. A, May 2008 (read 13 November 2026)
- Golden Technologies: FAQs (read 13 November 2026)
- Golden Technologies: Power Lift Recliner warranty, LIT-INS-LCWAR 02.19.2021 (read 13 November 2026)
- Golden Technologies: PR404 owner's manual and limited lifetime warranty, hosted by 1800wheelchair (read 13 November 2026)
- Catnapper and Jackson Furniture: warranty page (read 13 November 2026)
- La-Z-Boy: Parts and Warranty Information (read 13 November 2026)
- CPSC: La-Z-Boy recalls power supplies sold with lift chairs, recall 17-083 (read 13 November 2026)
- Monster Scooter Parts (US): lift chair hand controls, motors, transformers, control boxes, cables, frame parts and accessories collections, read from the store's products.json data for each collection (prices read 13 November 2026)
- Monster Scooter Parts: Warranty Policy (read 12 November 2026)
- SpinLife (US): lift chair parts, Hand Controls category (prices read 13 November 2026)
- SpinLife (US): 2-Button Hand Control for Golden Lift Chairs, ZK1200-HC-1 (price read 13 November 2026)
- SpinLife (US): 2-Button Hand Control for Golden Lift Chairs, ZK1200-HC-1, Overview text (read 13 November 2026)
- CMS: LCD L33801, Seat Lift Mechanisms, revision effective 07/02/2023 (read 13 November 2026)
- CMS: Policy Article A52518, Seat Lift Mechanisms, revision effective 07/02/2023 (read 13 November 2026)
- Medicare: Medicare Coverage of Durable Medical Equipment and Other Devices, booklet 11045 (read 9 November 2026)
Read on . The wording of the article is our own.


