Independent buying service: send one enquiry, get a personal quote with delivery to your country How it works →
Mobility Atlas
Find it for me Request a part

Wheelchair push rims guide 2026: aluminum, titanium, ergonomic, coated and projection handrims compared, sizes, mounting, prices and warranty

Wheelchair push rims from Spinergy, Out-Front, CarboLife, Motion Composites and BLAX compared: types, wheel sizes, mounting, weights, prices at US sellers, manuals and warranty.

46 min read · By , founder of Mobility Atlas ·

Contents

The short answer

Wheelchair push rims, also called handrims or pushrims, are the rings bolted to the outside of a manual wheelchair's rear wheels. You push on them to move and squeeze them to slow down, so, in our view, they are the part of the chair your hands touch most. Spinergy's handrim page puts it this way: "Handrims are your interface for wheelchair propulsion 2000-3000 times per day". This guide compares the push rims that makers and US sellers list in November 2026: what they are made of, what shape and surface they have, which wheel sizes and mounting systems each page says they fit, what they weigh as printed, what they cost, and what the manuals and warranties say. It goes deeper on push rims than our wheelchair wheels guide, which covers rims in one section next to tires, casters and axles.

What are wheelchair push rims, and which type should you buy? They are the rings you grip to propel and brake a manual wheelchair, and they come in four broad families: plain round aluminum, anodized or polished metal (aluminum, stainless steel or titanium), ergonomic shaped rims such as Natural-Fit, Surge, TC MAX and CarboLife Gekko, and coated or projection rims for weaker grip, such as plastic coated, Q-Grip and projection rims. Mobility Atlas read the makers' pages, two chair order forms, three owner's documents and three US sellers' listings on 13 November 2026. Sunrise Medical's clinical education page sorts the choice by hand function: anodized, powder coated and Natural-Fit oval rims for full hand function, oval rims with a grip strip for slightly less, and coated, shaped-and-coated or projection rims for limited hand function. Fit comes next: the rim must match your wheel size and its mounting points. Price comes last: on Spinergy's store a pair ran from $130.00 for silver aluminum to $780.00 for titanium.

Three questions settle most of the choice. How much grip and strength do your hands have, and does pushing hurt your hands, wrists or shoulders today? What wheel is on the chair: its size, whether it is spoked or a mag wheel, and how many points the old rim is fixed at? And do you need the chair to be as narrow as possible for doors at home? Each push rim page answers one or two of these, so the sections below line the answers up side by side.

The first question belongs partly to a clinician. Which rim suits your hands, and whether a coated or projection rim is right for you, is a decision to make with your occupational therapist, physical therapist or seating clinician, ideally after trying rims on a chair. This guide explains the options, what each maker says about them and what to ask, and then stops. Mobility Atlas earns a fee or margin when you order through us; the comparison below uses the makers' published documents, sellers' listings, public FDA and Medicare records and, where named, rows of our own catalog, read on the dates given in the method section.

How we compared, and which documents we read

Our method was simple. On 13 November 2026 we opened each page named in this guide in a browser and saved its text, with the address and the date, before writing. For PDF manuals and order forms we extracted the text in the browser and saved the pages that mention handrims, marking the gaps. The exceptions are three documents saved earlier and reused: Medicare's rule for wheelchair options and accessories, LCD L33792, its policy article A52504, and FDA's page about the MAUDE database, all read on 9 November 2026. We did not use review sites, forums or search-engine summaries as sources. Where we did arithmetic, such as a price gap, a pair price from a per-rim price or a conversion from ounces to grams, a script computed it from the saved text.

The makers' documents we read were Spinergy's handrim collection page, its product records for the 13 products listed there (11 handrims and 2 thumb guards), the specification sections of 8 handrim pages (4 of which print a table), its TC MAX page and its warranty and returns page; Out-Front's installation sheet for the Natural-Fit handrim (rivet-nut version), which SpinLife hosts; Sunrise Medical's clinical education page on wheelchair handrims, published 28 July 2025; Ki Mobility's Rogue 2 order form and its Rogue 2 and XP owner's manual; Permobil's TiLite ZR and ZRA order form dated March 2026; Invacare's Tracer SX5 user manual; and the handrim pages of Invacare's parts catalog for the 9000 series. Out-Front's own website did not load when we tried it on 13 November 2026, so Out-Front products are described from Spinergy's, SpinLife's and Sportaid's pages and from the Out-Front sheet SpinLife hosts.

For prices we read three US sellers on the same day: SpinLife's search results for handrim and six of its product pages, the first of four result pages of Sportaid's search for handrim and three of its product pages, and PER4MAX's page for CarboLife handrims. For codes and coverage we read the HCPCS descriptions in the National Library of Medicine's lookup, and the Medicare documents named above. For safety records we ran an openFDA word search of device reports and recalls on 13 November 2026.

What we did not do: we did not buy, fit or test any push rim, and we did not ask any maker or seller a question. Where two documents give different figures for the same product, we give both and say which page printed which. Where a page gives no figure, we say so. Prices checked November 2026. Documents checked November 2026.

Wheelchair push rims at a glance: the core table

The table lists the push rims for which we read a maker's page or a named seller's page, grouped by type. Prices are as printed on the date we read them, in US dollars, with the unit the page gives. A dash means the page we read printed no figure.

Push rimType and surfacePrice as printed (unit)Weight as printed
Spinergy Aluminum, SilverRound, clear anodizedFrom $130.00 (pair), Spinergy-
Spinergy Aluminum, Hard Anodized GreyRound, hard anodizedFrom $168.00 (pair), Spinergy-
Spinergy Aluminum, Hard Anodized BlackRound, hard anodized$178.00 (pair), Spinergy-
Spinergy TCRound stainless, embossed$450.00 (pair), Spinergy-
Spinergy TC MAXOval stainless, embossed$530.00 (pair), Spinergy-
Spinergy Titanium, SatinRound titanium$780.00 (pair), Spinergy-
Natural-Fit Original OvalOval, thumb piece optional$310.00 (pair), Spinergy24 ounces, Spinergy
Natural-Fit LT OvalSmaller oval$350.00 (pair), Spinergy20 ounces, Spinergy
Natural-Fit SurgeOval with grip strip$480.00 (pair), Spinergy1.5 pounds, SpinLife
Natural-Fit Surge LTSmaller oval, grip strip$525.00 (pair), Spinergy1.05 pounds, SpinLife
Natural-Fit Q-GripRound, neoprene coated$470.00 (pair), Spinergy-
Newton AirGrip (Motion Composites)Coated, 11 colors in description (20 in color list)$134 (pair), SpinLife-
BLAX EverydayNeoprene coated$399 (each), SpinLife-
CarboLife Curve, Gekko, Quadro, TetraShaped profiles, some coated$237.50 to $277.50 (each) in the product record; page shows $238 for 22 inch Curve, Pre-order, PER4MAX-
Black vinyl handrimsRound, vinyl coated$110.00 (Cost; sold in pairs), Sportaid-
Projection rims, 8 vertical (Ki)Rim with vertical knobs$374 (new-chair option)-

Three notes on the table. First, the same product can carry different weights and prices on different pages, and a page's unit matters: SpinLife sells the Surge and Q-Grip as a single handrim ("each"), while Spinergy prices them per pair. Second, the PER4MAX price shown is the page's figure with the first option selected (22 inch Curve); its product record prices the CarboLife models from $237.50 to $277.50 per handrim. Third, the Ki price is an option price on the Rogue 2 order form, which applies when the rims are ordered with a new chair; the order form's columns run together in the extracted text, so confirm the line with Ki or your dealer.

SpinLife's weight field lists 1.5 for the Natural-Fit pair page, 0.8 for the Q-Grip, 2 for BLAX and 1 for the Newton AirGrip pair, without a unit next to the number in the record we saved. Its Natural-Fit description, however, says the Natural-Fit "weighs only 1.5 lbs" per handrim, so we print only weights that a page states in words with a unit.

Materials: aluminum, anodized, stainless steel and titanium

Plain round aluminum rims are the starting point. Spinergy's handrim page says aluminum handrims "are usually offered as the" standard or no-charge rim when you order a new chair, and the two order forms we read agree for those chairs: TiLite's form lists ZRIM1, "Aluminum Handrim, Silver Anodized", as Standard and the black anodized version as No charge, and Ki's Rogue 2 form lists Aluminum Anodized as N/C. Spinergy prints a 3/4 inch tube diameter for its aluminum and titanium rims, which is 19.1 mm.

Anodizing is a surface treatment, not a different metal. Spinergy's page says aluminum rims are anodized "to prevent fine dust from turning your hands black", and describes two finishes. Clear anodized rims look silver; Spinergy says silver rims are "known for not showing scratches as much as a darker color". Hard anodized rims are gray or black, and the page says "Grey or black anodized handrims are known for added durability against scratches and dents, but each scratch is more visible against the darker color." Its hard anodized product pages describe the finish as resistant to corrosion and say the rims "will resist dents and scratches better than any other treatment". Those are Spinergy's claims about its own finish; we hold no test that compares finishes.

Invacare's parts catalog for the 9000 series shows how finishes change over time. Its handrim pages say: "As of 8/11/15 Chrome Handrims were replaced by Alum. Clear Anodized" and that a black 34P finish was replaced by black anodized rims. In our view, if you are replacing a rim on an older chair, the finish you see may no longer be sold, so ask for the current equivalent by part number.

Stainless steel is the next step up. Spinergy makes the TC (Tactical Control) and TC MAX in stainless steel and says the "special stainless steel is lightweight and won't turn your hands black like aluminum can." The TC pages describe an embossed texture and list the feel as "Non-sticky, cool even in hot sun, non-burning on down slope/low friction". The TC page says it is for an "advanced grip ideal for full function hands". Spinergy prints no weight for the TC or TC MAX on the pages we saved.

Titanium is the top of the price range. Spinergy's satin titanium rim costs $780.00 a pair, $650.00 more than its silver aluminum pair and 6.0 times the price by our sums. The product text says titanium is durable against everyday scratches and dents, and that "a light buffing with a scotch-brite pad makes them look new again." On Permobil's TiLite form, the satin titanium rim, ZRIM12, is a $509.00 option, and the form says it is not available with 20 inch (451) or 22 inch (501) rear wheels or with 24 inch (540) knobby tires. Sportaid's first result page listed "Titanium Wheelchair Handrims – Choose Size" at $535.00, a tile that names no maker, so we do not tie it to Spinergy or any other brand.

Spinergy's two titanium figures for sizes do not agree. The size selector in its product record offers 24, 25 and 26 inch rims; the specification table on the same product page lists 22 inch (501), 24 inch (540) and 25 inch (559). In our view, if you need a 22 inch or 26 inch titanium rim, ask Spinergy or the seller to confirm the size in writing before you pay.

Shape and surface: round, oval and grip-strip rims

Shape is the second big choice. A standard rim is a round tube. Ergonomic rims change the cross-section so the hand has more to hold. Sunrise Medical's education page, written for clinicians, describes the Natural-Fit oval this way: "The oval shape provides additional surface area, opening the grip and providing a more ergonomic push". It adds that Natural-Fit rims are "useful for riders with good strength and grip who travel longer daily distances." The page calls its own list "a general guide (not a hard-and-fast rule)" and ends by saying that "a thorough assessment and hands-on trials are key to finding the best fit."

The Natural-Fit comes in two parts: the oval rim and an optional thumb piece that closes the gap between the oval and the wheel rim. Spinergy's page for the Original Oval says it "offers 80% more surface area for grasping than a standard handrim and weighs just 24 ounces." The LT Oval is smaller; Spinergy says it is "17% lighter than the originals, these handrims weigh just 20 ounces" and that it is "Also suitable for smaller hands." Spinergy sells the thumb pieces separately: the Standard Thumb Guard, with a powder coated, low friction surface, and the Super Thumb Guard, with what the page calls a grippy, non-slip coating.

Grip-strip rims put a high-friction strip on the top of an oval and keep the sides smooth for braking. Spinergy's page for the Natural Fit Surge says it "features a strip of grippy material around the outer circumference of the handrim for more traction on propulsion" and that "The sides of this oval pushrim retain a smooth braking surface." SpinLife's Surge page says the Surge "is recommended for a person with good hand function", and describes the strip as "especially helpful when going up ramps, hills or traversing difficult surfaces." Sunrise's page lists the Ellipse 3R and the CarboLife Gekko in this group, for riders with slightly less hand function. For the Gekko it says "The anodized low-friction surface at the sides prevents heat generation during braking."

Spinergy's TC MAX takes a third route: an oval stainless rim with an embossed texture rather than a strip. Its page says "A wider surface area and oval shape ease tension in the hands and wrists." CarboLife, whose rims PER4MAX's page calls "German-engineered" and sells in the US, makes several shaped profiles. PER4MAX's page describes the Curve as having "a flat top for your thumb and a curved side", the Curve L as a scaled-up Curve, the Gekko as an oval with "a high-traction, replaceable silicone strip" (Sunrise's page calls it a rubber strip), and the Gekko S as a downsized Gekko for smaller hands.

The shape claims in this section are the makers' and sellers' own descriptions. None of the pages we read published a test result that compares push effort or injury between rim shapes, and we did not look for clinical studies. SpinLife's Natural-Fit page claims a "16% reduction in effort to grip the rim" but gives no test behind it. In our view, the way to compare shapes is the way Sunrise's page suggests to clinicians: try two or three rims on a chair with your therapist before ordering. In our view, ask the dealer whether a demo wheel can be lent.

Coated and projection rims for weak grip

When the hands cannot close firmly around a rim, a smooth metal tube slips. The pages we read offer three answers: coatings, shaped profiles with coatings, and projections. Which one fits a given person's hands, and whether a power assist would serve them better, is a clinical question; the paragraphs below describe what the makers say.

Coated rims. Sunrise's page says plastic coated rims "feature a full plastic coating to enhance grip and control" and warns: "The added friction can generate heat, so wearing gloves is recommended for comfort." On the order forms, Ki lists Plastic Coated at $130 on the Rogue 2, and TiLite lists ZRIM5, Plastic Coated Handrim, Black, at $174.00. Sportaid lists Black Vinyl Wheelchair Handrims with a Retail figure of $150.00 and a Cost figure of $110.00, a round profile and a 6 tab mount. RGK's Tetra Grip plastic coated rim is in our catalog as a single 24 inch handrim with a six-tab bolt-through mount.

Neoprene and silicone coatings. The Q-Grip is round, like a standard rim, but coated. Sunrise's page says it has a "larger circumference than plastic coated handrims" and "typically has better durability when compared to the plastic coated handrims". Spinergy's Q-Grip page calls it "ideal for those with limited hand function" and describes "an exclusive, latex-free, anti-slip neoprene coating". SpinLife's BLAX page lists "Non-Marking" and "Hand Coated in the USA"; BLAX's warranty on the same page "does not cover normal wear of neoprene coating due to use". Motion Composites' Newton AirGrip is a coated rim offered in 11 colors in SpinLife's description (its color list on the same page names 20); the page says the coating "prevents peeling, cracking, and hand-burning friction".

Shaped and coated. CarboLife's Curve Tetra-Grip combines the Curve shape with what PER4MAX's page calls an "oversized, highly aggressive, anti-slip plastic coating", and describes it as best for people with tetraplegia who keep full triceps function. The CarboLife Quadro uses a square tube; PER4MAX's page says it is for "Tetraplegics without triceps function". Sunrise's page describes the Curve L Tetra Grip as "a great solution for tetraplegics who want to push a manual wheelchair." These are the sellers' and maker's descriptions, not clinical findings.

Projection rims. These have short knobs or tabs standing out from the rim, so the user can push with the palm. Sunrise's page describes an 8 Oblique rim "For those with very limited or no finger function" and gives a warning for that rim: "be wary if you start going down hills, as it's difficult to time where the tabs will be at higher speeds." Ki's Rogue 2 form lists "Projection (8 Vertical Projections)" at $374. Invacare's 9000 parts catalog lists black plastic coated projection rims with 8 oblique, 8 vertical and 12 vertical projections, with handrim part numbers such as 1115394 for an 8 vertical rim and 1115396 for an 8 oblique rim on its 24 inch composite wheels 2244BK, 4244BK, 5244BK and U2244BK (U2222 wheels take 1115398 and 1115399). Medicare's code list keeps them apart: E0967 is a "hand rim with projections, any type, replacement only, each", while E2205 covers a "handrim without projections (includes ergonomic or contoured), any type, replacement only, each".

Covers are a fourth, cheaper route. A cover slips over the existing rim. SpinLife lists RibGrips covers at $199 a pair, sized by handrim diameter from 17.75 to 23 inches, which is about 451 to 584 mm, and our catalog lists slip-on silicone covers and RehaDesign's push rim covers. In one FDA report from 2021, a power-assist maker wrote that a user's rims had been fitted with a handrim cover "to improve the grip but this did not improve the handling". In our view, a cover is worth trying before you change rims, but ask your therapist to watch you push and brake with it.

Sizes: matching the push rim to the wheel

A push rim is sold by the size of the wheel it fits, not by its own diameter. Spinergy's specification tables give each wheel size with its ISO rim number in brackets: 20 inch (451), 22 inch (501), 24 inch (540), 25 inch (559), 26 inch (590) and 700c (622). In our view the bracketed ISO number is the safer one to quote when you order, because it ties the inch size to one wheel: on these pages a 24 inch rim is made for a 540 wheel. Sportaid's aluminum handrim page uses the same pairs for 22 to 26 inch (501 to 590), has no 20 inch size, and labels 700c as 27 inch; its size list also includes rims made for particular wheels, such as "24″ (540) for 5 spoke X-Core only".

The ring itself is smaller than the wheel. Ki's owner's manual for the Rogue 2 and Rogue XP prints the handrim diameter in its ISO specification sheets: 508 mm (20.0 in) for the Rogue 2 and 535 mm (21.0 in) for the Rogue XP. The sheets do not say which wheel size those figures were measured on, so treat them as examples of how a handrim diameter is printed, not as a size guide. Covers are the one product we read that is sized by the ring: RibGrips' sizes run by handrim diameter.

Not every rim comes in every size. On Spinergy's store, 20 inch rims appear on the silver aluminum page, the 700c size on the silver and gray aluminum pages at $198.00 a pair, and the Natural-Fit models from 22 to 26 inches. SpinLife's Surge options say the 20 inch size is for the "Surge LT only". The Q-Grip on SpinLife comes in 22, 24, 25 and 26 inch sizes with 6-point tabs, and in 24 and 25 inch sizes with 6-point rivnuts. TiLite's form says its Q-Grip option is not available with 20 inch (451) rear wheels. In our view, read the wheel size off the tire or the order record before you shop, and give the seller the ISO number as well as the inch size.

Sizes and widths interact. The way a rim is mounted changes how far it stands off the wheel, and so the overall width of the chair. That is covered in the next sections, with the mounting systems.

Mounting: tabs, Q-tabs, rivnuts and attaching points

How do you know which push rims fit your wheel? Match three things: the wheel size, the mounting type and the number of mounting points. Mobility Atlas read the fit lines on Spinergy's, SpinLife's, Sportaid's and PER4MAX's pages, Out-Front's Natural-Fit installation sheet and Invacare's 9000 parts catalog on 13 November 2026. Tab mount rims have tabs on the ring that bolt to the wheel. On rivnut (rivet-nut) rims the threaded inserts are in the rim itself: Out-Front's sheet has the screws pass through the wheel into the rivet-nuts in the oval component. Invacare's catalog lists 6, 7 and 9 attaching points for different wheels, and SpinLife's Surge page offers 5-point to 8-point rivet nut versions plus a 6-point tab mount. In our view, a rim with the wrong point count will not bolt on, so count the screws on the current rim, note tabs or rivnuts, and give the seller the wheel's brand and model.

Spinergy calls its tabs Q-tabs and prints "6 Q-tab" for its silver and gray aluminum and titanium rims, and 12 Q-tabs for its gray 700c rim. If the old screws pass through tabs on the rim, it is a tab mount; if they pass through the wheel into threaded inserts in the rim, it is a rivnut rim.

The makers' and sellers' pages list exceptions. Spinergy's silver aluminum rim in the 700c size is listed as compatible with its SPOX Sport SL and X-Laced XSL wheels "or other brands with 6 handrim mounting holes", and "Not compatible with Spinergy SLX or XSLX models because those use 12 tabs in the 700c size". SpinLife's Newton AirGrip page says "6 Q-Tab Attachments- will not work on Xcore or rivnut attachment wheels". SpinLife's Natural-Fit page says, under each installation option, "The Natural-Fit does not fit wheels with 4 or 9 point connections." Its Surge page notes that the 5-point, 7-point and 8-point rivet nut versions are for "X-Core, Invacare, or Skyway Mags" in the 24 inch size only, and do not fit 4 or 9-point mags. TiLite's order form says its X-Core mag rear wheel "Requires aluminum silver anodized handrims."

The Natural-Fit rivet-nut kit shows how much the wheel type matters. Out-Front's installation sheet gives three sets of steps. For spoked wheels: "Use the 6 screws and spacers provided." For mag wheels, 6 screws and spacers for 6-spoke mags, and "For 7-spoke mag wheels, use the 7 screws and spacers provided". For X-Core wheels, the kit supplies 6 spacers and you reuse your old screws. The sheet also warns that on a mag wheel with stand-offs you "MAY NEED TO BEND THE STAND-OFFS IN OR REMOVE A SMALL AMOUNT OF PLASTIC" from the wheel so the thumb guard fits. SpinLife's Natural-Fit page adds that it "Connot install on Quickie Mag wheels ordered w/o handrim" (the typing error is SpinLife's).

Two more fit notes come from SpinLife's option lists. For tab-mount wheels with flat-free or solid insert tires, the Surge page says "the Surge must be installed prior to the flat free tires", and the Natural-Fit page says the same for the Natural-Fit. In other words, on those wheels the tire may have to come off to change the rim. Spinergy's silver aluminum page points the other way for its own wheels: "Pair these up with our rivnut system for an easy installation that won't involve taking your tires off." PER4MAX's CarboLife page says "Every model in the CarboLife line features a versatile 6-tab mounting setup" and asks buyers to "include your Wheelchair Serial Number to ensure exact hardware compatibility".

Invacare's catalog ties each rim to a wheel by part number. Under the heading "Composite (COM)" it lists, for the 24 inch composite wheel with pneumatic tire 2244BK, handrim 1064036 with kit 1065790 and 7 attaching points; under "Chrome Plated (CHDRM)" the same wheel has handrim 1054966 with kit 1025153, also 7 points, and the page says chrome rims were replaced as of 8/11/15. For projection rims on that wheel it lists the 8 vertical rim 1115394 with kit 1062764, also 7 points. On the 24 inch composite wheel with urethane tire U2222, the projection rims use 6 points and kit 1062763. If your chair is an Invacare 9000, the catalog page for your wheel is the place to start; the full catalog and the Invacare parts process are covered in our Invacare wheelchair parts guide.

In our view, do not infer fit from a name. A rim listed for "Spinergy" on one page may not fit a Spinergy wheel with rivnuts; a rim sold for 6-point tabs will not bolt to a 7-point mag. Where no page lists your wheel, ask the seller to confirm the fit in writing before you order.

Hardware: screws, spacers and kits

Push rims are held on by small screws, and the screws, spacers and nuts are parts in their own right. Sportaid sells a "Q – Tab Mount Handrim Hardware Kit", stock number 8018K, at a Cost figure of $4.99 (Retail $6.99). Its page says the kit includes "12 screws & 12 nuts, along with all the hardwareyou will need for mounting 1 pair of 6-tab-mount handrims to any set of wheels" and to "Order 2Q – Tab Mount Handrim Hardware Kits for 12-tab handrims." That claim of fit to any set of wheels is Sportaid's; the Spinergy and SpinLife pages above list wheels that 6-tab rims do not fit.

Invacare's catalog prints the parts inside each kit. Its 6-point non-projection kit 1025150 contains six #10-32 x 1-3/4 inch pan head screws "w/ Patch"; its 7-point kit 1025153 adds seven spacers; its kit 1065790 uses #8-10 x 1-1/2 inch hex head screws. The projection rim kits use longer chains of parts: kit 1062764 for vertical projection rims lists two kinds of screw, a chrome attaching link, a #10-32 locknut and a #10 flat washer, seven of each. Three parts on that page, in kits 1062763 and 1062765, are marked NLA (no longer available). The catalog notes that each kit "contains enough hardware for (1) handrim", so a pair needs two kits.

Out-Front's Natural-Fit sheet is firm about reusing hardware on spoked and mag wheels: "DO NOT USE THE OLD SCREWS AND SPACERS. SCREWS AND SPACERS ARE PROVIDED." It also says that if you forget or skip the spacers and screws provided, "YOU MAY DAMAGE THE THUMB GUARD AND VOID THE WARRANTY." The last step is to tighten the screws "in a criss/cross pattern", and the sheet adds: "THE THUMB GUARD SHOULD NOT SPIN WHEN YOU PUSH ON IT AND SHOULD BE CENTERED ON THE WHEEL." At the top, the sheet warns: "Failure to follow these instructions will void the product warranty."

In our view, when you order a replacement rim, ask whether the hardware is included, and keep the old screws in a labeled bag until the new rim is on and tight. A missing spacer changes how far the rim stands off the wheel, and a loose screw is the start of a loose rim.

Width, tab length and close mounting

The gap between rim and wheel sets two things: room for your fingers, and the overall width of the chair. Spinergy's handrim page says that once you choose a rim you will be asked to choose "Short tab," or "Long tab", and that "this determines how close the handrim is positioned to the wheel". It adds that Natural-Fit rims with thumb guards are long tab only. Spinergy's thumb guard pages explain why: the guard closes the gap between rim and wheel, "preventing fingers from getting caught", and to do that "the handrim must be mounted in the long tab position."

On new chairs the order forms price the choice. TiLite's form lists ZRIM7 Long Tabs as Standard and ZRIM8 Short Tabs at $28.00, "Not available with Mag rear wheels, The Natural-Fit handrims with thumb grip, or Natural-Fit handrims on Shadow wheels." Ki's Rogue 2 form lists a Close Mount at $28, and says "If no selection is made, Standard Mount will be used". Sportaid's aluminum rim page offers a Short Tab option for $40, marked "Tabs are cut - non returnable" and not available on 12 tab rims. Spinergy's Surge LT text mentions a choice between "close-in mount or wide mount options", and PER4MAX's CarboLife page says the 6-tab setup lets the rims be "mounted in" for a narrow setup or "mounted out" for more thumb and finger clearance.

Width matters at home. In our view, a narrower mount can get a chair through a door; a wider one gives fingers room and can make grabbing the rim easier. Measure your narrowest doorway with the chair in it before you choose short tabs, and ask your therapist whether your hands need the clearance. The Spinergy FlexRim, a wheel with a flexible built-in rim, is a separate approach covered in our Spinergy guide.

At least three reports in the set we read describe fingers and rims. In a 2025 report, Sunrise Medical said it received a dealer's complaint about an "END USER SUSTAINING BROKEN FINGERS WHILE USING THE HANDRIMS AND WHEELS OF A QUICKIE 2 WHEELCHAIR", and that the dealer asked for a quote for different wheels and handrims. In a 2026 Medline report, a complaint said "whoever assembled it missed the hole for the hand rim" and that the user caught a finger on it. Another 2026 Medline report says a spacer between the wheel and the handrim had come loose, and the user said a metal piece hurt their fingers. Reports are allegations and investigations, not proof of cause; the FDA section below explains how to read them.

Weights as printed, and where the figures differ

Weights are scarce on the pages we read. Of the 13 Spinergy product records we saved, the Natural-Fit Original Oval and LT Oval are the two that state one in words. SpinLife's descriptions give weights for the Natural-Fit and the Surge. The table lists each figure with its page, and a conversion by script.

RimFigure as printedPageConverted
Natural-Fit Original Oval24 ouncesSpinergy680 g
Natural-Fit (original)1.5 lbs per handrimSpinLife680 g
Natural-Fit LT Oval20 ouncesSpinergy567 g
Natural-Fit LT1.2 lbs per handrimSpinLife544 g (19.2 oz)
Surge1.5 poundsSpinLife680 g
Surge LT1.05 poundsSpinLife476 g (16.8 oz)

For the Natural-Fit original, the two pages agree: 24 ounces is 1.5 pounds. For the LT they differ slightly: Spinergy prints 20 ounces, SpinLife 1.2 pounds, which is 19.2 ounces, a gap of 0.8 ounce. Spinergy's pages do not say whether 24 and 20 ounces are for one rim or a pair; SpinLife's bullet says "per handrim". Spinergy's own sentence says the LT is "17% lighter than the originals"; 20 against 24 ounces is 16.7 percent by our sums. For the Surge, our catalog row lists 20 oz for the Surge and 16 oz for the Surge LT, lighter than SpinLife's 1.5 and 1.05 pounds. In our view, where two figures differ, plan on the heavier one (Spinergy's 20 ounces for the Natural-Fit LT, SpinLife's 1.5 pounds for the Surge) until the maker confirms in writing.

Does a few ounces matter? In our view, a rim's weight counts whenever the wheel is lifted, for example into a car, and on every push. We found no maker page that quantifies the effect of rim weight on pushing, so we do not claim one. Where weight matters to you, ask the seller for the weight per rim of the exact size and mount you are ordering, because the pages above do not say which size their figure was weighed in.

Prices: maker stores and new-chair order forms

There are two ways to pay for push rims: as an option when a new chair is ordered, or as an aftermarket part later. The prices differ, and the maker stores, order forms and seller product pages we read name a unit; Sportaid's search tiles do not. All the prices in this section were read on 13 November 2026 in US dollars.

Spinergy's store prices rims per pair. Its collection page listed 13 products: 11 handrims and 2 Natural-Fit thumb guards. The 11 handrims ran from $130.00 (silver aluminum) to $780.00 (satin titanium); the 700c size of the silver and gray aluminum rims was $198.00. A full Natural-Fit is two products on Spinergy's store: the Original Oval at $310.00 plus the Super Thumb Guard at $270.00 makes $580.00 a pair, or $510.00 with the Standard Thumb Guard. The TC MAX costs $80.00 a pair more than the round TC.

Option on a new chairKi Rogue 2 formTiLite ZR/ZRA form
Aluminum, anodizedN/CStandard or No charge
Superlight aluminum$54-
Plastic coated$130$174.00
Projection (8 vertical)$374-
Q-Grip-$358.00
Natural-Fit, Standard Grip-$428.00
Natural-Fit, Super Grip-$466.00
Natural-Fit LT, Super Grip-$514.00
Surge / Surge LT-$433.00 / $466.00
Ergonomic (Ki Ergo range)$392 to $539-
Titanium, satin-$509.00
Short tabs or close mount$28$28.00

Ki's Rogue 2 form is effective 8/17/2026 and TiLite's is dated March 2026. The Ki prices come from extracted text in which the form's two columns run together, so a price can sit next to the other column's item; we print the pairings as the text shows them and ask readers to confirm each line with the dealer. The forms also print conditions. On Ki's form, text near the Superlight line says it is available only on 24 and 25 inch wheel sizes and only on MAXX Spokes, Superlight or Spinergy wheels, and not with One Arm Drive, and the Ergonomic Handrims column is headed by a note that they are not available with 20 or 26 inch wheels; again, the columns are mixed. On TiLite's form, the Natural-Fit options with a thumb grip are "Not available with short tabs or Spinergy Carbon Blade rear wheels". TiLite's form lists 11 priced handrim options from $174.00 to $514.00. It also says: "HCPCS Codes are for reference purposes only. Actual coding and coverage varies by payer." A code on an order form is the maker's coding, not a promise of payment.

In our reading of these three sources, ordering with the chair can cost less. On TiLite's form the Natural-Fit with Super Grip is $466.00 as an option; on Spinergy's store the same combination is $580.00 a pair, and on SpinLife $548.00 by our sums. The form does not say whether this is the price a dealer charges, or whether it is added to or replaces the standard rim; ask the dealer for the quoted price. In our view, if you already know you want an ergonomic or coated rim, ask for it on the chair order rather than as a later swap.

Prices: what US sellers list

How much do wheelchair push rims cost in 2026? From under a hundred dollars a pair for plain aluminum to several hundred for titanium and most ergonomic rims; coated rims ran from $110.00 (Sportaid's vinyl pair) to $598 (a BLAX pair on SpinLife). Mobility Atlas read three US sellers' pages on 13 November 2026. SpinLife's five handrim results ran from $134 to $399; that set excludes a power-assist product (AMP Handrim Power Assist, $6,795) and a pair of covers, and mixes units: the Q-Grip and Surge are priced each, so a pair is $338 and $490. On the first of four result pages at Sportaid (16 of 58 results), 11 handrim tiles, leaving out three racing small parts, a hardware kit and a replacement thumb surface, ran from $65.00, a sale price (was $99.00), to $535.00 for titanium. PER4MAX priced CarboLife rims at $237.50 to $277.50 each. Prices differ by seller, country, sales period and funding; ask for a written quote.

RimSpinLifeSportaid (page 1)Spinergy store
TC (round stainless)-$405.00$450.00 pair
TC MAX (oval stainless)-$477.00$530.00 pair
Q-Grip$169 each$292.50$470.00 pair
Surge$245 each (Starting at)$284.00$480.00 pair
Natural-Fit$349 pair, no thumb piece$255.00 (kit)$310.00 pair, oval
Newton AirGrip$134 pair$134.00-
Plain aluminum-$99.00From $130.00 pair

Read the units before comparing. Sportaid's search tiles print a price without a unit; its aluminum and vinyl product pages say "Sold in pairs", and its Natural-Fit tile says "Kit". SpinLife's Surge page shows "Starting at $245.00" next to an original price of $352, and its record lists the LT profile at $12 more per rim. SpinLife's Natural-Fit pair is $349 for the oval without a thumb piece; the Standard Grip and thumb piece add $149 and the Super Grip $199, which makes $498 and $548 a pair. BLAX's SpinLife page prices a 24 inch Everyday rim at $399 each and adds $199 for a pair, $598 in all.

Some gaps are easy to compute. For the TC MAX, Sportaid's tile was $53.00 below Spinergy's pair price, and for the TC $45.00 below; Sportaid's tiles do not say pair or each, so confirm the unit before you count on the gap. The Newton AirGrip was $134 at both: a pair on SpinLife, and on Sportaid's tile, which names no unit. Shipping is extra on some pages: Sportaid's aluminum and vinyl rim pages list standard ground shipping in the continental US at $25.00 as a required choice.

Mobility Atlas can find and quote push rims, mounting hardware and thumb pieces, including parts that are not listed on our wheelchair wheels, handrims and tires page. The process is an enquiry or a part request, then a written quote that includes delivery to your country; nothing is charged before you accept the quote. Send the chair's make, model and serial number, the wheel size and ISO number, the number of mounting points and a photo of the old rim; those details let the quote match your wheel.

What manuals say about checking and replacing push rims

The two owner's manuals we read treat the rim as part of routine checks. Invacare's Tracer SX5 user manual lists "Inspect handrims for signs of rough edges or peeling." under its initial checks and again under its periodic checks; it does not put the rim in its weekly or monthly lists. Its care section says: "Periodically check handrims to ensure they are secured to the rear wheels. If loose, have them tightened by a qualified technician." The same manual says: "Every six months or as necessary, take your wheelchair to a qualified technician for a thorough inspection and servicing."

Replacing a rim is short in the Tracer SX5 manual. Section 9.10, Replacing Rear Wheel Handrim, has five steps: remove the rear wheel, remove the mounting screws, remove the rim, secure the new rim with mounting screws, "Tighten securely", and refit the wheel. It opens with a warning: "If the wheelchair is equipped with permanent axles, this procedure MUST be performed by a qualified technician."

Ki's Rogue 2 and XP manual has a maintenance table with a line asking the owner to check that handrim fasteners are tight and secure and that the handrims are not damaged. The column layout of the table did not survive text extraction, so we cannot say from our copy whether that line is weekly, monthly or annual; check the printed manual. On PDF page 7, the manual says to "Keep both of your hands on the handrims" as you go over obstacles (the extracted columns run together, so read the printed warning in full).

Two maker pages add care notes. Spinergy's titanium page says scratches can be buffed with a scotch-brite pad. Spinergy's warranty page also has a repair kit for FlexRim wheels, covered in our Spinergy guide. For tires, bearings and the wider repair routine, see our manual wheelchair repair guide and the 15-minute tire and caster care routine.

In our view, three signs mean a rim needs attention now: it moves or clicks when you push hard, its coating is peeling or cracked, or it has a sharp burr or dent where your palm runs. In our view, a loose rim points first to the screws, and Invacare's manual leaves tightening to a qualified technician; a cracked or bent rim needs replacing, not tightening.

Warranty and returns, document by document

Warranty terms belong to the document that prints them, and the push rim pages we read print very different ones. We list them by document; none of them is a promise from Mobility Atlas.

Spinergy. Its warranty page says "Spinergy wheelchair wheel products are warranted for 1 year from date of purchase against manufacturing defects in materials or workmanship", for the original owner with proof of purchase. It says "This Limited Warranty is not transferable" and "The original owner shall pay all labor & shipping charges connected with the repair or replacement of the wheel." The exclusions include normal wear and tear, sport use such as basketball, quad rugby and tennis, and "damage occurring during shipment, improper assembly or assembly with non-compatible products." The page also says that if the purchase date is 4 years after the wheel was made, the warranty is no longer valid. The page is written about wheels; it names the FlexRim handrim in a clause of its own but does not name separately sold handrims. In our reading it is unclear how the terms apply to a pair of rims bought on their own, so ask Spinergy in writing before you buy.

FlexRim. Spinergy's warranty page has a separate one-year clause and a repair kit for the FlexRim, its wheel with a built-in rim; our Spinergy guide quotes that clause.

Out-Front products on SpinLife. SpinLife's pages for the Surge, Q-Grip and Natural-Fit list the warranty type as "No Warranty", with this text: "The product shall arrive free of all factory defects or workmanship issues." That is SpinLife's listing; Out-Front's own terms were not available to us because its website did not load. Out-Front's installation sheet says that not following its instructions "will void the product warranty". In our reading, this implies Out-Front offers a warranty; ask the seller for its terms in writing.

Motion Composites and BLAX on SpinLife. The Newton AirGrip page carries Motion Composites' warranty text, which gives "Components: One year" for Motion Composites-made components, and extends the warranty "only to the original consumer purchasers". BLAX's page gives a 60 day limited warranty from Islands, LLC, and says it "does not cover customer installation, or setup adjustment" or normal wear of the neoprene coating.

Returns. SpinLife's return text on each of these pages says: "This item has a 20% Restocking Fee." It says the buyer pays return shipping, that a return authorization must be requested within 30 days of delivery, and that items "Custom-made by the manufacturer to suit your specific needs are non-returnable." Sportaid's aluminum rim page marks its 22 inch size as special order and nonreturnable, and its short tab option as non returnable because the tabs are cut. In our view, settle the size and mount before you order, because a wrong rim may cost a restocking fee or may not be returnable at all. For warranty basics that apply to whole chairs, see our ultralight wheelchair guide, which compares chair warranties document by document.

Medicare, codes and funding

In the US, Medicare's HCPCS list describes replacement push rims with two codes: E2205 for a "handrim without projections (includes ergonomic or contoured), any type, replacement only, each", and E0967 for a "hand rim with projections, any type, replacement only, each". Rims supplied with a new manual chair are bundled into the chair's payment under policy article A52504, and the coverage rule LCD L33792 says "Options and accessories for wheelchairs are covered if the beneficiary has a wheelchair that meets Medicare coverage criteria and the option/accessory itself is medically necessary." We read L33792 version 43 and A52504 version 61 on 9 November 2026; both versions end on 12/19/2026, and a future version of L33792 takes effect on 12/20/2026, so check the version in force when you order. Our wheelchair wheels guide covers the codes and bundling in more detail.

A code on a maker's form is not coverage: TiLite's order form says its HCPCS codes "are for reference purposes only". Medicare Advantage plans, Medicaid, the VA and private insurers set their own rules; ask them in writing. Prices and funding also differ by country and by seller.

What FDA reports and recalls show

We searched FDA's device files through openFDA on 13 November 2026, by a word search of report narratives for handrim, pushrim, push rim and hand rim (singular and plural), with the data last updated 4 November 2026. FDA calls its MAUDE database a passive system and its page about MAUDE says "this passive surveillance system has limitations", including under-reporting. Most reports in this set come from makers, not from users: 52 of the 55 reports from 2021 to 2026 are marked as manufacturer reports, 2 as distributor reports and 1 as a voluntary report. Counts are counts of reports, not of chairs or people, and nothing here is a rate.

The word search found 303 reports received from 1994 to 15 October 2026. They cluster in time: 231 of them, 76 percent, were received from 2011 to 2015, with 67 in 2013 alone, and 40 in 2026. We read the saved narrative passages of the 55 reports received from 2021 onward.

Of those 55, 38 name Medline as the maker, all received between 6 August and 7 October 2026. By our reading of the saved passages, 29 of the Medline reports describe the handrim itself as broken, fractured, cracked, snapped, bent, loose or rough, or a bolt fractured out of it; two of them say the wheel fractured at the hand rim, and four more describe the wheel fractured through its spokes and hand rim. Four passages call it a plastic hand rim and a fifth describes the handrim's plastic connection points. In at least 10 of the Medline passages we saved (11 counting one cut off after "due to shipping"), Medline wrote that the issue was most likely due to shipping damage. One report reads: "the right rear wheel handrim is fractured, with the fracture appearing to be located right at one of the handrim attachment points." Another reported that "The hand rim is loose and the end user claims it will not stay tight". In at least 4 of the Medline passages we saved, the report states there were no reports of death, serious injury, medical intervention, or follow up care. These reports concern Medline wheelchairs and wheels, not the aftermarket rims compared in this guide.

A second group, 11 reports, concerns power add-ons: Alber's e-motion and SMOOV units and Max Mobility's and Permobil's SmartDrive. Several describe users grabbing the handrims to stop when a drive did not switch off; one Max Mobility report says the drive "continued to run which forced the end-user to hold on to the wheelchairs hand rims until a bystander could turn the drive unit off." Alber's 2021 SMOOV report says that "A STANDSTILL/BRAKE OF THE WHEELCHAIR MUST BE DONE BY USING THE PUSH RIMS"; its 2025 e-motion report says that when a user grabbed the push rims of the add-on drive while stopping on a hill, the motor received a forward impulse and the chair tipped backwards. How to brake depends on the device: follow its own manual, and our SmartDrive guide covers that device.

A word search of FDA's recall records for the same words (without the plural "push rims") in product descriptions and recall reasons returned no matches on 13 November 2026. That means no recall record matched these words in those two fields; it does not mean no recall has ever involved a wheel with a rim on it. Check a chair's recall history by its model; our wheels guide covers the recall records about wheels.

Three traps

Trap one: buying by inch size alone. A 24 inch rim can be built for 540 wheels with 6 tabs, 6 rivnuts, or a 7-point mag, and the pages above list wheels each one does not fit: Spinergy's 700c silver rim is not for SLX or XSLX wheels, the Newton AirGrip will not work on X-Core or rivnut wheels, and the Natural-Fit does not fit 4 or 9 point connections. Give the seller the wheel make, the ISO number and the point count.

Trap two: comparing a price per rim with a price per pair. SpinLife sells the Surge and Q-Grip each, BLAX each with a pair option, and Spinergy per pair; PER4MAX sells CarboLife rims individually. A $245 Surge from SpinLife is $490 a pair, against Spinergy's $480.00 pair. Ask for the total for two rims, hardware and shipping, in writing.

Trap three: ordering a grip you have not tried. A coated or projection rim changes how you brake as well as how you push. Sunrise's education page warns that plastic coatings can generate heat and, for its 8 Oblique rim, that the tabs are hard to time going downhill, and SpinLife's 20% restocking fee and the non-returnable custom items mean a wrong choice can cost money. In our view, try the rim on a demo wheel with your therapist first.

Three composite scenarios

These are composite scenarios, not individual customers. Each uses only the documents for the chair or rim it names.

Scenario one: a new Ki Rogue 2 for a rider with limited grip. The rider's therapist and supplier fill in Ki's Rogue 2 order form, effective 8/17/2026. The form lists Plastic Coated rims at $130 and Projection (8 Vertical Projections) at $374, and the form says its 3M Micro Grip option is "Not available on Plastic Coated or Projection Handrims". The projection option on the form also carries wheel conditions, which the extracted text runs together with the next column, so the supplier confirms with Ki which wheels it fits. The base chair is listed at $2930 with a 275 lb weight capacity. Because the rims are ordered with the chair, they are on the chair's order, not bought later.

Scenario two: replacing a cracked rim on an Invacare 9000 with 24 inch composite wheels and pneumatic tires (2244BK). Under the heading "Composite (COM)", the 9000 parts catalog lists the non-projection handrim 1064036 for that wheel with hardware kit 1065790 and 7 attaching points, and says the kit contains hardware for one handrim; the same page also has a chrome plated row for that wheel, so the owner confirms with Invacare or the dealer which row matches the rim on the chair. The kit uses #8-10 x 1-1/2 inch hex head screws. The owner orders one rim and one kit by those numbers, asks whether a single rim will match the finish on the other wheel, and checks the chair's own owner's manual for who should fit it; that manual was not among the documents we read for this guide.

Scenario three: a Spinergy wheel owner choosing between round and oval stainless rims. On Spinergy's store the TC is $450.00 a pair and the TC MAX $530.00, both in 22, 24, 25 and 26 inch sizes. The TC page says its texture suits "full function hands"; the TC MAX page says the oval shape eases tension in the hands and wrists. Neither page prints a weight. The owner asks Spinergy which tab length the order will use, since Spinergy's page says the tab choice "determines how close the handrim is positioned to the wheel", and asks Spinergy in writing whether its 1 year wheel warranty covers rims bought on their own.

Questions to ask the therapist, the dealer and the seller

Ask your occupational therapist or physical therapist:

  • Which rim types should I try: round, oval, grip strip, coated or projection, and in which order?
  • Is my grip strong enough to brake on a slope with this rim, and should I wear gloves with it?
  • Do I need the thumb gap closed, or the rim mounted wider for finger clearance?
  • Would a power assist or a different wheel help more than a different rim?

Ask the dealer or seller:

  • Which wheel make, model, size and ISO number is this rim made for, and how many mounting points does it use?
  • Is it tab mount or rivnut, long tab or short tab, and how much width does that add?
  • Is the price per rim or per pair, and are screws, spacers and the thumb piece included?
  • On my tires, does the tire have to come off to fit the rim?
  • What warranty applies, who pays labor and shipping, and is the rim returnable if it does not fit?
  • What is the weight of one rim in my size, in writing?

Ask Medicare or your plan, if you hope it will pay: is a replacement rim covered for my chair, which supplier must I use, and what do you need from my clinician? Write down the answers with the name and date.

Sources and documents

Every document below was read on 13 November 2026 unless its entry says otherwise; Medicare's LCD L33792 and article A52504 and FDA's page about MAUDE were read on 9 November 2026. Prices are those printed on that date and change. We copied quotes from the saved text of each page. Where a PDF's columns ran together in extraction, we say so next to the figure. Catalog rows cited as our catalog are rows of the Mobility Atlas catalog, used for non-price facts. The full list of documents, with links, follows this article.

This article is general information. Rules and prices differ by country and change, so confirm them before you buy or travel.

Common questions

What is the difference between a push rim and a handrim?

None: push rim, pushrim, handrim and hand rim name the same part, the ring fixed to the outside of a manual wheelchair's rear wheel. Spinergy's page says handrims are "also known as pushrims". Medicare's code list uses both spellings: E2205 for a handrim without projections and E0967 for a hand rim with projections.

How do I measure my wheelchair for new push rims?

Read the wheel size, not the rim: the tire sidewall or the chair's order record gives the inch size and the ISO number, such as 24 inch (540) or 25 inch (559). Then count the screws that hold the old rim and note whether they pass through tabs on the rim or through the wheel into threaded inserts (rivnuts) in the rim. Give the seller the wheel's make and model too, because the pages we read list wheels that some rims do not fit.

Are ergonomic push rims worth the extra cost?

It depends on your hands, and that is a question for you and your occupational or physical therapist after a trial. The makers' pages make claims, such as Spinergy's statement that the Natural-Fit Original Oval offers 80% more surface area for grasping than a standard handrim, but none of the pages we read publishes a test comparing push effort between rim shapes; SpinLife's Natural-Fit page claims a 16% reduction in effort to grip the rim without giving a test. On Spinergy's store an oval TC MAX pair cost $80.00 more than the round TC.

Can I put new push rims on my old wheels myself?

Sometimes. Out-Front's Natural-Fit sheet describes a screwdriver job, with screws and spacers supplied (spacers only for X-Core wheels, which reuse the old screws) and the screws tightened in a criss/cross pattern. Invacare's Tracer SX5 manual lists five steps for replacing a rim but says that on a chair with permanent axles the job must be done by a qualified technician, and that loose handrims should be tightened by a qualified technician. On some tab-mount wheels with flat-free or solid insert tires, SpinLife's pages say the rim must go on before the tire, so the tire may have to come off.

Does Medicare pay for replacement push rims?

Medicare has two codes for replacement rims, E2205 without projections and E0967 with projections, and its coverage rule, LCD L33792, covers accessories if the chair meets Medicare criteria and the accessory itself is medically necessary. Rims that come with a new manual chair are bundled into the chair's payment under article A52504. Medicare Advantage, Medicaid, the VA and private plans set their own rules, so ask them in writing. Prices and funding also differ by country, seller and sales period.

Can Mobility Atlas get push rims that are not listed on the site?

Yes. Mobility Atlas can find and quote push rims, mounting hardware and thumb pieces, including parts that are not listed. Send an enquiry or part request with the chair's make, model and serial number, the wheel size and ISO number, the mounting type and point count and a photo; you receive a written quote with delivery to your country, and nothing is charged before you accept it.

Sources

  • Spinergy: Wheelchair handrims collection, USD prices (read 13 November 2026)
  • Spinergy: Handrims collection product records (sizes, prices, descriptions)
  • Spinergy: Handrim specification tables (aluminum, titanium, TC pages)
  • Spinergy: TC MAX Stainless Steel Handrim
  • Spinergy: Wheelchair limited warranty and return policy
  • Out-Front (Three Rivers): Install your Natural-Fit handrims, rivet-nut version (PDF hosted by SpinLife)
  • Sunrise Medical, Education in Motion: Wheelchair Handrims (published 28 July 2025)
  • Ki Mobility: Rogue 2 order form, USA, effective 8/17/2026 (PDF)
  • Ki Mobility: Rogue 2 and XP user instruction manual and warranty, DCN0935.4 (PDF)
  • Permobil: TiLite ZR / ZRA order form, US, March 2026 (PDF)
  • Invacare: Tracer SX5 wheelchair user manual, Part No. 1110550 (PDF)
  • Invacare: Parts catalog Form No. 95-137, 9000SL/XT/XDT, handrim pages (PDF)
  • SpinLife: Search results for handrim (prices read 13 November 2026)
  • SpinLife: Out-Front Surge Handrim, each
  • SpinLife: Out-Front Q-Grip Handrim, each
  • SpinLife: Out-Front Natural Fit Handrim, pair
  • SpinLife: Motion Composites Newton Air Grip Handrim (Pair)
  • SpinLife: BLAX Everyday Handrim
  • SpinLife: RibGrips Wheelchair Handrim Covers
  • Sportaid: Search results for handrim, page 1 of 4 (prices read 13 November 2026)
  • Sportaid: Aluminum Anodized Wheelchair Handrims, choose size and attachment types
  • Sportaid: Black Vinyl Wheelchair Handrims
  • Sportaid: Q-Tab Mount Handrim Hardware Kit
  • PER4MAX: CarboLife Handrims (sold individually)
  • National Library of Medicine: HCPCS lookup, handrim (E2205)
  • National Library of Medicine: HCPCS lookup, E0967
  • CMS: LCD L33792, Wheelchair Options/Accessories, version 43 (read 9 November 2026)
  • CMS: LCD L33792, future version effective 12/20/2026 (read 9 November 2026)
  • CMS: Article A52504, Wheelchair Options/Accessories policy article, version 61 (read 9 November 2026)
  • openFDA: device adverse event reports, word search for handrim, pushrim, push rim and hand rim, counts by date
  • openFDA: device adverse event reports, same word search, received 2021 to 2026
  • openFDA: device recalls, word search for handrim, pushrim, push rim and hand rim (no matches)
  • FDA: About the MAUDE database (read 9 November 2026)

Read on . The wording of the article is our own.

Products from this article

Related guides

All articles

Resources for AI agents

Ask AI about us

See what your favorite assistant says about Mobility Atlas.