Permobil SmartDrive MX2+ in 2026: specs, controls, fit, battery and flying, prices, warranty, Medicare and recalls
Permobil's SmartDrive MX2+ power assist from its own manuals: specs, controls, fit and mounting, battery and flying, seller prices with dates, warranty, Medicare rule and recalls.
Contents
- The short answer
- How we compared
- What the SmartDrive is, in Permobil's and the FDA's words
- Specifications as Permobil prints them
- Speed, range and hills: ceilings, not promises
- SwitchControl, wearables and the control modes
- The SpeedControl Dial is no longer offered
- The PushTracker app and firmware
- Will it fit my chair?
- Mounting: the axle clamp and the folding adaptor bar
- Battery and charging
- Flying with a SmartDrive
- What the manual warns about
- Unintended movement, radios and Bluetooth
- Maintenance and service life
- Is power assist right for me? The therapist's question
- What a SmartDrive costs in 2026
- The HCPCS code Permobil prints: E0986
- Does Medicare pay for a SmartDrive?
- Warranty, as the manual words it
- What the FDA recall records show
- How to buy a SmartDrive
- Three traps
- Three composite scenarios
- Questions to ask the therapist and the dealer
- Your plan: 10 minutes, today, this week
- Sources and documents
- Common questions
- Sources
The short answer
What is the Permobil SmartDrive MX2+? Mobility Atlas read Permobil's US product page, user's manual, brochure, order form and price sheets, six sellers' pages, the Medicare rule and the FDA recall records in October and November 2026. The SmartDrive MX2+ is a power assist: one motorised wheel, the OmniWheel, that clips onto a manual wheelchair between the rear wheels and pushes the chair while the user steers on the handrims. The manual gives a range of up to 12.3 miles, a top speed of 4 mph by default or 5.5 mph optional, a 13.2 lb drive unit and users from 30 to 331 lb. Its built-in battery is 122 Wh on Permobil's airline certificate. Permobil's 2026 sheet lists the system at $7,529.00 MSRP; Sportaid (US) showed "Cost: $6,626.00" on 5 November. Permobil prints HCPCS E0986. The manual gives two years against manufacturing defects. openFDA holds 7 recall records for its SpeedControl Dial and for PushTracker watch software.
| Item | As Permobil gives it (manual decimals restored) | Document |
|---|---|---|
| Range | Up to 12.3 mi (19.8 km) | Manual and brochure |
| Top speed | 4 mph default, 5.5 mph optional | Manual |
| Drive unit weight | 13.2 lb (6 kg) | Manual and brochure |
| Total assembly weight | 14.4 lb (6.5 kg) | Manual |
| User weight | 30 to 331 lb (14 to 150 kg) | Manual |
| Battery | LiFePO4, 36 V, 3.4 Ah, 122 Wh | IATA certificate |
| Drive wheels | 22, 24, 25 or 26 in | Manual |
| Code printed | E0986 | Product page |
| List price | $7,529.00 MSRP, $6,626.00 MAP | SmartDrive MAP 2026 |
| Warranty | Two years, manufacturing defects | Manual |
Mobility Atlas earns a fee or margin when you order through us; the comparison below uses only Permobil's published pages, manuals and price sheets, sellers' pages, the CMS and Medicare.gov texts, the FDA's recall data and our own catalog. We do not rank the SmartDrive against other power-assist devices; our power add-ons guide explains the types. Whether power assist suits a person's shoulders, propulsion, transfers and chair is a decision for their physical or occupational therapist and the supplier's Assistive Technology Professional (ATP). This guide reports Permobil's claims as Permobil's claims and lists what to ask.
How we compared
On 5 November 2026 we read the English section of the SmartDrive MX2+ User's Manual (a 168-page multilingual PDF), Permobil's SmartDrive Airline Passenger IATA Certificate, the axle clamp and folder insert instructions, the PushTracker E2 manual, the SwitchControl information sheet and the 2021 enhancements sheet, all linked from Permobil's US product page. The same day we read the CMS Power Mobility Devices rule (LCD L33789) and its policy article (A52498), six seller pages in the US, Ireland, the UK and Australia, and openFDA's recall, enforcement and 510(k) records.
We reused files read earlier, each dated where it is used: Permobil's product page, brochure and May 2026 US order form, the SmartDrive MAP sheet, Permobil's warranty page and funding guide, the TiLite Z order form and the earlier openFDA download (all 27 October 2026); the FDA page that reposts Permobil's April 2025 recall announcement, Permobil's August 2025 recall release and three FDA recall pages (10 October 2026); Medicare.gov's wheelchairs and scooters page and the FAA's PackSafe page on mobility devices (10 October 2026).
Limits. The PDF text of the user's manual drops full stops, including decimal points, so "12 3 miles" in our extract is 12.3 miles; we checked each figure against the brochure or a sheet where one prints it, and say so where only the manual has it. We tested no SmartDrive, placed no order and called no one. Two sellers' pages answered with a security check and were not read.
Our catalog holds one SmartDrive row, PA-008, shown on our Permobil catalog page (b/permobil.html on this site). We use it only for facts that are not prices: it lists "5.5 mph; range 12.3 miles; 5.7 kg; max user 150 kg; fits 22-26 in wheels on rigid, folding and tilt chairs", the catalog row says. For Permobil as a company and its other brands, see our Permobil guide.
What the SmartDrive is, in Permobil's and the FDA's words
Permobil's US page calls it "SmartDrive MX2+ Wheelchair Power Assist"
and heads it "E0986: Manual wheelchair accessory"
. The manual says it is "exclusively intended to provide auxiliary power to manual wheelchairs to reduce the pushing power needed by their users, including pediatrics"
. The device sits behind the seat: a drive unit with a handle, four battery LEDs, a toggle switch and the OmniWheel, which the manual says has "16 or 18 rubber rollers".
The maker is Max Mobility, LLC of Lebanon, Tennessee; the manual says "Max Mobility, LLC is part of Permobil"
. openFDA's 510(k) database lists K151199, "SmartDrive Wheelchair Power Assist"
, from Max Mobility, LLC, received on 5 May 2015 and decided "Substantially Equivalent" on 30 July 2015, under product code ITI ("Wheelchair, Powered"), device class 2, regulation 890.3860. That is the FDA clearance record the recall records also cite.
Medicare's policy article A52498 defines a power assist system (E0986) as "An electrically powered option that intermittently transforms the manual wheelchair to a hybrid mobility device when the system is attached and activated or engaged [...]"
(quoted from the version that takes effect on 12/20/2026; we hold no saved text of the version currently in effect, and CMS's revision history dates these definitions from 10/01/2025). It adds that "E0986 is all-inclusive": wheels, batteries, a charger, a control mechanism and mounting hardware count as one unit. The same article separates a "Power add-on", which "permanently converts the manual wheelchair to a joystick-controlled power wheelchair (E0983) or tiller-controlled power operated vehicle (E0984)"
. The SmartDrive is coded E0986 by Permobil; the parts of that article we read name no brands.
The product page opens with the maker's pitch, "Take the strain off your shoulders"
, and Permobil's about page says that "Since 2012" the power assist "has helped individuals to maintain their independence"
. Those are Permobil's statements, and the pushing claims that follow them are discussed below. We did not test any of them.
Specifications as Permobil prints them
Permobil prints SmartDrive figures in three documents we hold, and they do not all agree. The table puts them side by side. Where the manual's PDF text dropped a decimal point, the figure is restored, checked against the brochure or sheet where possible.
| Figure | User's manual (2025) | Brochure MKTG0112-01 | SwitchControl sheet (2019) |
|---|---|---|---|
| Range | Up to 12.3 mi (19.8 km) | Up to 12.3 mi (19.8 km) | Up to 12.3 mi (19.8 km) |
| Theoretical continuous range | Up to 14.2 mi (22.9 km) | Not printed | Not printed |
| Top speed | 4 mph default, 5.5 mph (8.9 km/h) optional | Not printed | 5.5 mph (8.8 km/h) |
| Incline | 10 degrees (17%) | Climbs up to 10 degree slope | Not printed |
| Motor | 250 W, 36 V | 250 W Brushless DC | 250 W Brushless DC |
| Drive unit weight | 13.2 lb (6 kg) | 13.2 lb (6 kg) | 12.5 lbs (5.7 kg) |
| Total assembly weight | 14.4 lb (6.5 kg) | Not printed | Not printed |
| Size (L x W x H) | 15.3 x 5.7 x 9.5 in | 15.3 x 5.7 x 9.5 in | 15.3 x 5.7 x 9.5 in |
| User weight | 30 to 331 lb | 30 to 331 lb | 30 to 331 lb |
| Operating temperature | -25 to 50 C | -13 to 122 F | -13 to 122 F |
| Service life | 5 years | Not printed | Not printed |
The weights differ. The manual and brochure give the drive unit as 13.2 lb (6 kg); the 2019 SwitchControl sheet gives 12.5 lbs (5.7 kg), as does 1800wheelchair's page; Wheel Freedom's page gives "5.7kg / 0st 13lb", and our catalog row 5.7 kg. The manual also prints a "Total weight" of 14.4 lb (6.5 kg) for the whole SmartDrive assembly, and says "This weight should be included in calculating the on-board weight of the wheelchair"
. So when you check your chair's weight limit, plan on the manual's 14.4 lb, the highest figure, until Permobil or your dealer confirms another in writing.
The manual adds that "The stated values are from testing with a 331 lb. (150 kg) occupant"
and that "The range, speed, etc. vary depending on driving conditions."
Its asterisk reads: "Performance measurements will vary based on user and chair characteristics, driving and battery conditions."
The brochure says the SmartDrive "has been tested and conforms to all applicable requirements of ANSI/RESNA Standards for Wheelchairs - Volume 1 and Volume 2 and EN 12184."
That is Permobil's statement; we hold no test report.
Speed, range and hills: ceilings, not promises
Every range figure Permobil prints is a ceiling. The manual's 12.3 miles is for "level / no resistance conditions"
; its 14.2 mile figure is a "Continuous theoretical driving range"
. Plan on no more than 12.3 miles on a charge. The manual says its values come from tests with a 331 lb occupant and that range and speed "vary depending on driving conditions"
.
Speed is a setting. The manual says maximum speed is adjustable, with "4 mph (6 km/h) default" and 5.5 mph optional, and its footnote on the higher figure says "May be restricted in certain regions."
Acceleration is also adjustable, up to 2.0 ft/s2 from a 0.7 ft/s2 default, by the manual's table. The training form says SmartDrives are shipped "with moderate Max Speed and Acceleration settings"
, and the manual warns: "The acceleration of the SmartDrive could possibly cause the wheelchair to tip over backwards, causing injury."
Ask the dealer to set speed and acceleration with you, not for you.
On slopes, the brochure says the OmniWheel "climbs up to 10 degree slope (17% inclines)"
. The manual describes an anti-rollback feature but warns: "Anti-rollback is not a parking brake. Be sure to secure your wheelchair with brakes if stopping on a slope is desired."
It also asks users to "Consider switching the power assist OFF"
before going down a slope.
The pushing claims are Permobil's. The product page says "up to 80% fewer pushes"; the brochure says SmartDrive "has been proven to reduce up to 81%* of your pushes"
, with the asterisk pointing to "data collected from SmartDrive's SmartEvaluation App"
. Permobil's about page links the device to reducing "the risks of repetitive strain injuries"
, in its words. We hold no independent study of these claims, and whether fewer pushes matter for a particular person's shoulders is a question for their therapist.
SwitchControl, wearables and the control modes
The SmartDrive has no joystick. Its motor is activated and deactivated by a wired button on the chair frame, by taps from a watch on the user's wrist, or both. The product page says "SwitchControl (formerly known as the thumb throttle) is included at no extra cost with every SmartDrive MX2+."
The May 2026 order form says the system "Includes standard SwitchControl Buttons or SwitchControl Monojack and buddy button at no additional charge."
SwitchControl buttons
The manual describes two modes. In Momentary mode, the default, the motor ramps up "only while one of the buttons is being held"
; the manual says "When the held button is released, or both of the buttons [if present] are pressed, the driving will deactivate"
. In Latched mode, the SmartDrive will "remain driving / coast at the current speed when the button was released"
, and the manual says "When one of the buttons is pressed and released again, or both of the buttons [if present] are pressed, the driving will deactivate"
. The manual adds that deactivation "does not put the device in the power assist OFF / standby state"
. In Momentary mode, the button must be "pressed and held for longer than (1) second"
before the motor starts. A press and release of a wired button, the manual says, "will ALWAYS deactivate the motor / power assist any time that the motor is activated and driving"
. The mono jack version takes an external switch; Permobil's sheet lists an "MX2-BBB Buddy Button option"
.
PushTracker E2, E3 and your own watch
The PushTracker is a watch running Permobil's SmartDrive MX2+ app. The E2 manual says the app "is intended to be used on the PushTracker E2 (TicWatch E2)"
, and the user's manual lists the E3 as a TicWatch E3. The user's manual says the app "is compatible for use on select Apple Watch and Android wearables"
, and Sportaid's order options read "For Apple Watch Series 5 or newer and Samsung Galaxy Watc 4 or newer"
, as printed. Permobil's August 2025 recall release linked a page of compatible watches; on 5 November 2026 that web address returned "404 The page could not be found", so ask the dealer for the current list.
With a watch, three control modes are offered. The manual says MX2+ is the default, and that in it "Any DOUBLE tap will either activate and start ramping up the motor speed or deactivate it [if already driving], and a SINGLE tap while the motor is driving will set your coast speed [latch your current speed]"
. In MX2 the SmartDrive senses a push and drives "at a speed equal to that which was attained by the push"
, and the manual says "MX2 is designed to continue to drive you until a SINGLE tap is performed by the PushTracker / E3 worn arm or the power assist is turned OFF [...] OR until another, faster push is performed"
, when it speeds up. In MX1, which the manual says was formerly known as Beginner Mode, the manual says "you are also able to deactivate the power assist by braking on the handrims of the wheelchair"
. The manual says, twice, that "steering is still done by pinching on the handrims of the wheelchair"
.
The watch must stay close: the manual says the PushTracker "must be within 25 ft (8 meters) of the SmartDrive / smartphone to connect"
, and that "Power assist is always deactivated whenever the motor is driving and there is a loss of connection"
. The E2 manual says the PushTracker E2 "is considered swim-ready [up to 50 m]"
, while the user's manual says to take the PushTracker off before bathing or showering; follow the stricter line. The E2 manual says the band can be swapped for "essentially any 0.87 in (22 mm) wide off-the-shelf watch band"
. Which control a person can use safely, with their hand function, is for the therapist to assess; the manual's EZ-ON feature, "on PushTracker only / not on PushTracker E3"
, is described as "a great feature if you have limited finger function [...]"
, in its words.
The SpeedControl Dial is no longer offered
Older pages and manuals still describe a third wired control, the SpeedControl Dial. It was a frame-mounted knob, part numbers MX2-3DC, MX2-3DCK and MX2-3DCMC. Permobil's release of 12 August 2025 says the dial "is no longer an available control option for the SmartDrive MX2+ Power Assist Device"
and tells users to "Immediately discontinue use of the SpeedControl dial"
. The same release says "the SmartDrive MX2+ Power Assist Device is not impacted by this recall and can still be used with alternative control options."
The recall records are set out in the recall section below.
Seller pages do not always keep up. On 5 November 2026 Anderson Wheelchair's US page still said of the dial: "This standard controller is provided as a free option when purchasing a SmartDrive."
The 2025 user's manual we read also still describes SpeedControl operation. If any seller offers a dial, or a used SmartDrive comes with one, do not use it, and ask the seller in writing which control is included.
The PushTracker app and firmware
Permobil's product page says "The PushTracker app gives you access to change the SmartDrive settings and stay up to date with the latest firmware available."
The manual repeats the advice twice: "Check regularly for the latest app and device firmware updates"
, and before troubleshooting, "It is strongly recommended to update the firmware on your device to the latest version via the App"
.
Settings such as wired maximum speed, acceleration and SwitchControl mode live in the app. The manual says changing them "without the PushTracker E3 will require the use of the PushTracker mobile (smartphone) app on a phone / device"
. So a SwitchControl-only user still needs a phone with the app, or a dealer who sets it up. The E2 manual adds that the PushTracker app on the watch lets you "track your propulsion activity progress"
.
Firmware matters for safety, not only features: the 2023 PushTracker recall named software versions and told users to update, as the recall section shows. Ask the dealer to update the SmartDrive and watch at delivery and to show you how to check the version yourself.
Will it fit my chair?
The manual's "Wheelchair Compatibility" table is the test Permobil sets. It lists frame types "rigid, folding, tilt-in-space, one-arm drive"
, drive wheel diameters of "22, 24, 25 or 26 in (501, 540, 559 or 590 mm)", a folding frame attachment distance of 8.25 to 21.0 inches (210 to 533 mm), a user weight of "30 to 331 lbs (14 to 150 kg)" and a "Combined user / wheelchair weight maximum 351 lbs (159 kg)"
. It warns: "Do not attempt to attach the SmartDrive to a wheelchair that does not meet the dimensions outlined in the “Wheelchair Compatibility” section of “Specifications”"
. The brochure gives chair widths of 8 inches (with no anti-tips) to 22 inches.
Read the last line carefully. By our arithmetic, a user at the 331 lb maximum leaves 20 lb of the 351 lb combined limit for the wheelchair. The manual does not say whether the 14.4 lb SmartDrive counts inside that 351 lb, so ask the dealer to confirm in writing, with your own weight and your chair's weight.
Chair makers add their own limits. Permobil's TiLite Z order form (July 2026) lists the SmartDrive as an option at $7,529.00, coded E0986; the form's note reads "Not available with rear seat heights less than 13.5”. Maximum user weight capacity 331 lbs."
Sellers ask for the chair details too: Sportaid's options ask for chair make, rigid or folding frame and rear wheel size; 1800wheelchair lists Quickie, TiLite and Ki Mobility models; John Preston asks for chair width and wheel size.
Sellers' fields are not Permobil's limits. Sportaid's "User Weight" field reads "must be between 80 - 250 lbs."
, while Permobil prints 30 to 331 lb. We do not know why the seller's range differs. If you weigh more than 250 lb or less than 80 lb and order from Sportaid, plan on the seller's narrower range until Sportaid and Permobil confirm in writing that your order is accepted. John Preston's wheel options list 24, 25 and 26 inches, while Permobil also lists 22. Your chair maker's own manual may also restrict add-ons; the user's manual says "The maximum allowable on-board weight outlined by one's wheelchair manufacturer should never be exceeded with the addition of the SmartDrive"
. For choosing the chair itself, see our lightweight wheelchair guide and rigid or folding.
Mounting: the axle clamp and the folding adaptor bar
The drive unit does not bolt on each time. A bracket stays on the chair and the unit hooks onto it. On a rigid chair, the axle clamp instructions say the clamp "is designed to permanently mount to the axle tube of a rigid wheelchair while presenting a simple means of attaching/removing the drive unit."
The clamp is chosen by rear wheel size: 22 and 24 inch wheels use the 24 clamp, 25 inch the 25 clamp and 26 inch the 26 clamp.
| Axle tube | Clamp style and chart row in the instructions |
|---|---|
| 1.0 in (25 mm) | Standard tube, three dots |
| 1.125 in (30 mm) | Standard tube, two dots |
| 1.25 in (32 mm) | Standard tube, one dot |
| 1.35 or 1.375 in (35 mm) | Standard tube, no dots |
| 36 mm | Standard tube, no inserts |
| 1.5 in (38 mm) | Large tube, two dots |
| 1.77 in (45 mm) | Large tube, one dot |
| 2 in (50.8 mm) | Large tube, no dots |
The dots mark the hard rubber inserts that, the instructions say, slide "over the axle receiving tube to accommodate smaller tube diameters"
.
The instructions say the clamp must sit "midway between the two rear wheels"
, level, with its two screws "tightened to 4 ft-lbs (5.4 N-m)"
, and warn that over-tightening "could cause the parts to break during installation."
They add: "Adjust the clamp whenever changes are made to the chair."
John Preston in Ireland prices the mounting separately, with rigid options "with Camber bar up to 36 mm"
and "Over 36 mm", which, in our reading, corresponds to the two clamp styles.
Folding chairs use a folding adaptor bar between the axle areas. Permobil's insert sheet says inserts may be needed "If the quick-release axle tips are recessed or not accessible"
, and that the "Chair attachment point should be as close to rear wheel axle height as possible."
It lists inserts for named chairs, including the Quickie 2 Lite, the TiLite Aero X / 2GX and the Quickie / Sopur Neon / Xenon. The 2021 enhancements sheet describes a "reinforced SmartDrive adapter bar"
for folding chairs.
One line in the manual matters if you get stuck: "The attachment hardware is designed to fail first, so if you get the SmartDrive stuck, this can break the clamp / folding adaptor bar and leave you without power assist"
. Ask the dealer what a replacement clamp or bar costs, and keep the instruction sheets. Fitting is a dealer job, and the manual's training form lists "install it onto your wheelchair"
among the skills to "Demonstrate [...] to your dealer"
.
Battery and charging
The battery is built into the drive unit. The manual says "The SmartDrive houses the rechargeable Lithium Iron Phosphate battery used to power the motor"
and lists "Nominal operating voltage 36 V"
and an electric charge of 3.4 A-h. Permobil's IATA certificate gives the MX2+ as "36 V / 3.4 Ah / 122 Wh" with "1.0 gram Equivalent Lithium Content". The same certificate lists older MX1 models with a separate battery unit; for the MX2+, it is the drive unit that is switched off and carried. For battery types in general, see our power wheelchair battery guide.
Four blue LEDs show the charge: "All four (4) LEDs being illuminated on the SmartDrive indicate a full battery"
, the manual says, and the unit beeps "whenever the SmartDrive battery is below 15% and the motor is driving"
. A full charge takes "approximately 3 hours". The manual encourages charging "every night" and says "The life of the batteries will not be deteriorated by charging when it is partially drained"
.
- Use only the charger supplied: the manual warns
"Other chargers may damage your unit, or cause a fire."
- Switch the SmartDrive off to charge, and never use it while charging, the manual says.
- Make sure the magnetic charging socket is dry and clean; the manual says debris
"can cause a spark or short"
. - For storage over three months, the manual says to
"Charge the battery to at least 75% before you store it long-term"
. - Charge the PushTracker or watch as well as the SmartDrive before use, the manual says.
Flying with a SmartDrive
The SmartDrive has a lithium-ion battery, so airline rules apply. The manual says: "The SmartDrive must be carried onto your plane and should be stored in the overhead bin"
. It recommends "that advanced arrangements be made with each airline operator and approval received prior to departure date"
, and points to Permobil's certificate.
Permobil's "SmartDrive Airline Passenger / IATA Certificate"
(SDAC-001 Rev. D) states that the MX2+ battery, 122 Wh, "may be carried-on passenger aircraft without restriction according to IATA 2.3.2.4"
, on three conditions: the drive unit "must be turned off with the power switch"
and removed from the wheelchair; it "must be carried in the passenger cabin and stored in a matter to prevent powering on and damage by the movement of baggage, mail or other cargo"
, as printed; and "The pilot-in-command must be informed of the location of the lithium battery unit in the cabin."
The certificate adds: "This certificate does not apply to damaged or defective batteries."
That is the maker's reading of the IATA rule, not an airline's approval.
In the US, the FAA's PackSafe page on wheelchairs and mobility devices says "Individual airlines may have more restrictive rules regarding the acceptance of any dangerous goods, including lithium batteries that power mobility aids"
, and that "Advance arrangements and extra check-in time may be necessary."
Carry a printed copy of the certificate and the manual page, and confirm with your airline before you book. Rules differ by airline and country. For your rights at the airport and how chairs are stowed, see our guide to flying with a power chair.
In a car, the manual says to use the supplied foam stand; in a taxi, "it is recommended to have the driver hand you the SmartDrive"
so that it is not damaged by movement in the trunk. Shipping the unit is a dangerous-goods matter: "Contact the shipping company being used for instructions on how to correctly package and label prior to shipping"
, the manual says.
What the manual warns about
The manual's warnings are long, and several describe situations power-assist users meet every day. These are its words, in short.
- Curbs and steps: the manual says
"The SmartDrive is not designed to drive up or down large curbs / steps. Only perform this maneuver when absolutely necessary and always ask for help. Also be sure to turn OFF the power assist [...] before maneuvering."
- Parking and transfers: the manual's warning reads
"Always turn OFF the power assist [via SpeedControl, SwitchControl and PushTracker / E3] when parked, before transferring in or out of your wheelchair, taking the PushTracker / E3 off of your wrist and / or SmartDrive off of your chair to prevent accidental activation."
- Escalators: the manual says
"Do not take a SmartDrive-attached wheelchair on an escalator or moving walkway. Serious bodily injury may occur."
- Anti-tippers:
"It is STRONGLY recommended that Anti-Tippers be employed"
until the user is used to the SmartDrive in all conditions, the manual says. - Ground: the manual says Permobil
"recommends restricting the use of this device to indoor and light outdoor use"
, avoiding loose dirt, sand, gravel, standing water, ice, rough terrain and extreme slopes. - Water: the manual calls the SmartDrive "rain / splash proof" and says
"Complete submersion of either may cause malfunction or damage and void the warranty."
- Cushion: the wired buttons
"are designed to be used with a seat cushion, to prevent sitting directly on the cables"
, the manual says. - Practice first:
"It is strongly recommended that the user not attempt to use the SmartDrive outdoors until it can be safely operated indoors without difficulty"
, in the manual's words.
The manual also lists prerequisites, including that "The user is both physically and mentally capable of operating the wheelchair and device in all possible conditions and situations"
, which it labels a contraindication. Whether a person meets that is for the therapist and the dealer's training session, not for a website.
Unintended movement, radios and Bluetooth
The recall records store the reasons as a motor that "continues to run" (the watches) and a "potential for lost of control"
(the dials, as stored), and Permobil's dial announcements describe "Continued drive" and "Involuntary movement", so the manual's section on electromagnetic interference (EMI) is worth reading in full. It says powered devices "such as the SmartDrive are susceptible to EMI"
, and that these interferences "can cause unintentional activation of the SmartDrive motor or damage to its control system"
. The manual says the SmartDrive "has been tested and found to be immune to this minimum immunity level of 20 V/m"
, and adds that "any chair modifications or accessory additions can effect its immunity"
, as printed. That is Permobil's own test statement; we hold no test report.
- Phones and radios: the manual says
"Do not operate hand-held transceivers [...] or turn on personal communication devices, such as cellular phones, while the power assist is ON."
- If it moves by itself:
"If unintended movement occurs, turn the power assist OFF as soon as it is safe"
, the manual says. The manual also says a SpeedControl / SwitchControl button"press and release will ALWAYS deactivate the motor / power assist any time that the motor is activated and driving"
; it says the same of the SpeedControl Dial, which Permobil's August 2025 release says could fail"to fully stop when the SpeedControl Dial is pressed inward"
. - Report it: the manual asks users to
"Report all incidents of unintended movement to Customer Support, and note whether there is a source of EMI nearby."
You can also report to the FDA's MedWatch, as the recall section explains. - Bluetooth: the watch links to the drive unit over Bluetooth, and the manual says power assist is always deactivated when the motor is driving and the connection is lost.
Many phones and watches sit on the body all day, so in our reading the practical step is to learn the stop actions until they are automatic: a button press or release, a tap with the watch arm, or turning power assist OFF, as the manual describes them. The manual's training form asks users to "Demonstrate each of the skills to your dealer"
, including to "deactivate the driving, then brake to stop the wheelchair"
with the buttons and, with a watch, to "practice SINGLE tapping" and "DOUBLE taps"; ask the dealer to include every stop action you will use.
Maintenance and service life
The manual gives an "Expected lifetime / service life"
of 5 years. It asks for an inspection "prior to each use" of the SmartDrive, the OmniWheel, the watch, the attachment hardware and the buttons, and tells users to stop and contact support or the dealer if they notice any of these:
- Broken or cracked plastic
- Rollers that do not spin freely, have flats worn in them or are badly worn
- Ripping rubber on the PushTracker
- Missing or loose screws
- An adaptive clamp that has rotated downward on a rigid chair
- Broken or fraying cables
- Metal shards on the magnetic socket or plug
- Any abnormal motor activation or deactivation
Cleaning is a damp cloth "at least once a month, or as needed"
. The rollers can be replaced; Permobil's sheet lists an "MX2-994 Roller Replacement Kit"
at $249.00 MSRP. The manual says salt in snowy climates "may cause corrosion to the bearings on these rollers"
and that spraying lubrication on the roller bearings will "increase their usable lives"
. For repairs to the chair itself, see our manual wheelchair repair guide.
The troubleshooting page lists error codes, such as "[ERR: 004] Four (4) blinking SmartDrive LEDs indicate overheating inside the unit", and says that if a motor chip error repeats, "the SmartDrive circuit board will have to be replaced"
. That is a repair for Permobil or the dealer. The serial number "is located on its underside"
, the manual says; write it down on delivery day.
Is power assist right for me? The therapist's question
This guide cannot answer that, and neither can a product page. The manual itself sets the frame: use contrary to "the recommendations of one's mobility equipment dealer"
is "considered to be misuse", and it asks the user to sign a training form that the provider keeps "with the client's records"
. Medicare's rule, quoted below, lists a specialty evaluation (by a licensed or certified medical professional such as a PT or OT, or a practitioner with specific training and experience in rehabilitation wheelchair evaluations) among the criteria that must all be met.
What you can bring to that appointment is the facts: your weight against the 30 to 331 lb range, your chair's frame, wheel size and axle tube, how far you travel and on what ground, which hand movements you can make for taps or buttons, whether you fly, and how much you can lift (the drive unit is 13.2 lb in Permobil's brochure). Ask the therapist whether a trial is possible; John Preston's order options ask whether the buyer has "had a test drive".
For other kinds of add-on, from front attachments to power wheels and joystick kits, see our power add-ons guide. For a full power chair, see our electric wheelchair guide. We describe what each document says, and stop there.
What a SmartDrive costs in 2026
How much does a SmartDrive MX2+ cost? Mobility Atlas read Permobil's 2026 SmartDrive price sheet and US order form and six sellers' pages in October and November 2026. Permobil's sheet lists the MX2-162 system at $7,529.00 MSRP, the manufacturer's suggested retail price, and $6,626.00 MAP, the minimum advertised price; the May 2026 order form prints the same $7,529.00, with SwitchControl buttons included. On 5 November 2026 Sportaid in the US showed "Retail: $7,529.00" and "Cost: $6,626.00", and 1800wheelchair a default "Total:" of $6,675. John Preston in Ireland listed "€6,026.25 VAT Exempt", plus mounting hardware, and Wheel Freedom in the UK "£4,821 exc VAT / £5,785.20 inc VAT". Anderson Wheelchair in the US said "Call for Price". Prices differ by country, seller, set-up, VAT relief and funding, and none of these is what Medicare or an insurer pays a supplier.
All prices below are as each seller or Permobil showed them on the date given. They are listings, not quotes, and none comes from our catalog: our catalog row PA-008 carries a UK seller's price, but we do not use catalog prices here.
Permobil's own figures (read 27 October 2026)
| Part and name on the SmartDrive MAP sheet | MSRP | MAP |
|---|---|---|
| MX2-162 SmartDrive MX2+ System | $7,529.00 | $6,626.00 |
| MX2-TBS SwitchControl Buttons | $233.00 | $206.00 |
| MX2-TBSC SwitchControl Button with Monojack | $391.00 | $345.00 |
| MX2-BBB Buddy Button option for SwitchControl Button with Monojack | $262.00 | $231.00 |
| MX2-986 Universal Padded Handle | $22.00 | $20.00 |
| MX2SD-BAG Carrying bag | $84.00 | $74.00 |
| MX2-994 Roller Replacement Kit | $249.00 | $220.00 |
Permobil's MAP page says "2026 MAP pricing is effective January 1, 2026". The gap between MSRP and MAP for the system is $903, or 12.0 percent of MSRP, by our arithmetic. The order form adds a "PT1SD-P080 USB Power Bank"
at $22.00 that is not on the MAP sheet. The order form is a dealer form: its first fields are "Dealer Name" and "Account #".
Sellers (read 5 November 2026)
| Seller, country | Price as shown | Label or note |
|---|---|---|
| Sportaid, US | $6,626.00 | "Cost:"; "Retail: $7,529.00" |
| 1800wheelchair, US | $6,675 | "Total:", default set-up |
| Anderson Wheelchair, US | None | "Call for Price" |
| John Preston, Ireland | €6,026.25 | "VAT Exempt"; mounting extra |
| Wheel Freedom, UK | £4,821 / £5,785.20 | "Purchase Price"; exc VAT / inc VAT |
| Wheelchair Sales and Service, Australia | None | "ENQUIRE NOW" |
Sportaid's Cost equals Permobil's MAP and its Retail equals MSRP, and it showed the same $6,626.00 on 27 October. 1800wheelchair's default Total is $49 above MAP, by our arithmetic; its page lists "Thumb Throttle Buttons+ $369"
and "Carrying Bag+ $65" as extras. Sportaid's options price a SwitchControl button with mono jack at "+$350" and a Buddy Button at "+$230"; Permobil's sheet lists those at $391.00 and $262.00 MSRP ($345.00 and $231.00 MAP).
In Ireland, John Preston's mounting options add "€101.00" (VAT exempt) for a rigid frame and "€207.00" for a folding frame, so a VAT-exempt order would total €6,127.25 or €6,233.25, by our arithmetic. In the UK, Wheel Freedom's two figures differ by £964.20, which is 20 percent of the lower one: in our reading, the VAT that a buyer who qualifies for VAT relief would not pay. Whether you qualify is set by your country's tax rules; ask the seller.
Two other points before you pay. Sportaid's page says "once you buy it, you cannot return it."
And Sportaid's page offers shipping at no charge to the 48 contiguous states, quotes shipping to Hawaii, Alaska and Puerto Rico, and says the unit "CANNOT BE SHIPPED INTERNATIONALLY"
.
The HCPCS code Permobil prints: E0986
HCPCS codes are the US billing codes Medicare and many US insurers use. Permobil's US page heads the SmartDrive "E0986: Manual wheelchair accessory"
; its brochure and SwitchControl sheet print "HCPCS E0986" and its order form "E0986". Those are Permobil's statements about its own product. The 2019 SwitchControl sheet adds: "Since U.S. Medicare coding and coverage criteria is subject to change, the provider should always confirm the HCPCS code and coverage criteria as part of the client assessment process."
CMS's own text describes the code, not the brand. Its policy article A52498, in the version that takes effect on 12/20/2026 (the one we hold), calls E0986 a "Power assist system" and says "E0986 is all-inclusive. All components, e.g., wheels, batteries, a charger, a control mechanism, mounting hardware, etc., are considered as included in 1 UOS of the code."
In our reading, that means a supplier billing E0986 should not bill the clamp, charger or control separately to Medicare; ask your supplier how it bills extras. The rule's revision history says CMS changed the wording from "push-rim activated power assist device (E0986)"
to "power assist system (E0986)"
with effect from 10/01/2025.
Other payers may use other codes. A code on a maker's page does not mean Medicare or any plan will pay for that device for you; ask the supplier which code it would bill.
Does Medicare pay for a SmartDrive?
Does Medicare pay for a power assist like the SmartDrive? Mobility Atlas read the CMS rule for power mobility devices, LCD L33789, its policy article and Medicare.gov's wheelchair page in October and November 2026. The rule covers "A power assist system (E0986) for a manual wheelchair"
only if all its criteria are met. The person must meet the general power mobility criteria, including not having "sufficient upper extremity function to self-propel an optimally-configured manual wheelchair in the home [...]"
. They must have "been self-propelling in a manual wheelchair for at least one year"
, have a specialty evaluation by a licensed or certified medical professional such as a PT or OT, or a practitioner with specific training and experience in rehabilitation wheelchair evaluations, and get the device from a supplier with a RESNA-certified ATP. After the Part B deductible, Medicare.gov says you pay 20% of the Medicare-approved amount "if your supplier accepts assignment"
. We do not say any person will be covered.
The general criteria (A to C) in the version in effect on 5 November 2026 read: the beneficiary "has a mobility limitation that significantly impairs his/her ability to participate in one or more mobility-related activities of daily living (MRADLs) such as toileting, feeding, dressing, grooming, and bathing in customary locations in the home [...]"
; the "mobility limitation cannot be sufficiently and safely resolved by the use of an appropriately fitted cane or walker"
; and the beneficiary "does not have sufficient upper extremity function to self-propel an optimally-configured manual wheelchair in the home to perform MRADLs during a typical day [...]"
. The cuts hold the rule's definitions of a mobility limitation and of an optimally-configured chair.
The power-assist criteria then add, in the rule's words: "The beneficiary has been self-propelling in a manual wheelchair for at least one year"
; a specialty evaluation "that was performed by a licensed/certified medical professional, such as a PT or OT, or practitioner who has specific training and experience in rehabilitation wheelchair evaluations and that documents the need for the device in the beneficiary's home"
, where "The PT, OT, or practitioner may have no financial relationship with the supplier"
; and a supplier "that employs a RESNA-certified Assistive Technology Professional (ATP) who specializes in wheelchairs and who has direct, in-person involvement in the wheelchair selection for the beneficiary"
. The rule ends: "If all of the coverage criteria are not met, it will be denied as not reasonable and necessary."
Two further points from CMS. The specialty evaluation "is in addition to the requirement for the face-to-face encounter"
, and "There must be a written report of this evaluation available on request."
And the policy article says that if a power assist system "is only needed for mobility outside the home, the GY modifier must be added"
, which in our reading flags a claim Medicare does not expect to pay. These rules are about the home; a need that is mainly outdoors or at work is a different case to discuss with the therapist.
A new version of L33789 takes effect on 12/20/2026; its notice period started on 11/05/2026, the day we read it. For power assist it changes wording, not substance, in our reading: "licensed/certified medical professional"
becomes "LCMP", the ATP is abbreviated, "Basic Coverage Criteria" becomes "general coverage criteria"
, and the section is renumbered from VIII to IX. Check the version in effect on the date of service.
Medicare.gov's wheelchairs page, read on 10 October 2026, says "Medicare will only pay for DME items if you get them from suppliers who are enrolled in Medicare"
and that "You may need to rent the equipment."
It does not name power assist devices. Permobil's own funding guide says "Insurance companies typically pay for the least costly, medically appropriate alternative."
Medicare Advantage plans, Medicaid, the VA and private insurers set their own rules; confirm with the plan before you order. For funding in general, see our electric wheelchair guide.
Warranty, as the manual words it
Permobil's US legal page, read on 27 October 2026, lists ten warranty documents, from "BodiTrak Warranty" to "Tru-Shape Remake and Warranty Policy"
; none is named for SmartDrive, and the two Permobil product warranties list power wheelchairs by name. So the SmartDrive's terms are the ones in its user's manual. It says: "Permobil offers a two (2) year warranty against manufacturing defects"
. The brochure and the SwitchControl sheet print "2-Year Limited Warranty".
The manual limits the remedy: Permobil's obligation "shall be limited to repairing or providing replacement of part(s), which are found to be defective"
, and replacements are at Permobil's discretion with "a functionally operative part"
. It lists four ways the warranty "may be voided": use not according to the manual, "improper use as determined by the company personnel"
, "modification or alteration of any nature"
to the circuitry or construction, and causes such as defects "due to cause beyond control like lightning, abnormal voltage or while in transit at the purchaser's place of business"
. Elsewhere the manual says rough terrain, submersion and "unauthorized modifications"
can void it.
One more line belongs in every buyer's file: "Permobil is not responsible for any damage to one's wheelchair caused by the attachment or operation of the SmartDrive"
, the manual says. Ask your chair maker or dealer whether fitting the clamp or bar affects the chair's own warranty.
The PushTracker E2 has a shorter term: its manual says "Permobil [SmartDrive] / Max Mobility offers a 1 year warranty against manufacturing defects."
We found no printed term for the PushTracker E3; ask the dealer. The manual gives no period start date or transfer rule that we found; ask the dealer when the two years begin and whether they pass to a second owner. Sportaid's page says the unit cannot be returned once bought, which is a seller term separate from the warranty.
What the FDA recall records show
On 5 November 2026 we searched openFDA's device recall data for "smartdrive", "smart drive", "max mobility" and "pushtracker". The data was last updated 2026-10-31 (recalls) and 2026-10-28 (enforcement reports). The searches returned 7 records, the same 7 SmartDrive records we found in our 27 October download. They belong to 3 recall events initiated from 10 May 2023 to 12 August 2025, and all 7 were listed as "Ongoing" in the enforcement data. 5 records concern the SpeedControl Dial and 2 the PushTracker E2 and E3 watches. No record names the SmartDrive drive unit itself as the recalled product.
| Record | Class | Initiated | Product | Quantity as stored | Scope as stored |
|---|---|---|---|---|---|
| Z-2004-2023 | Class II | 10 May 2023 | PushTracker E2 | 18,905 units | All units, software 1.0.00 to 1.0.04 |
| Z-2005-2023 | Class II | 10 May 2023 | PushTracker E3 | 6,196 units | All units, software 1.0.00 to 1.0.04 |
| Z-1116-2025 | Class I | 20 Dec 2024 | Dial MX2-3DC | unknown | All serials made 17 Aug 2023 to 21 Nov 2024 |
| Z-1117-2025 | Class I | 20 Dec 2024 | Dial MX2-3DCK | unknown | All serials made 17 Aug 2023 to 21 Nov 2024 |
| Z-2538-2025 | Class I | 12 Aug 2025 | Dial MX2-3DC | 25,389 units | All serials distributed 25 Apr 2022 to 8 Jul 2025 |
| Z-2539-2025 | Class I | 12 Aug 2025 | Dial MX2-3DCK | 15,834 units | All serials distributed 25 Apr 2022 to 8 Jul 2025 |
| Z-2540-2025 | Class I | 12 Aug 2025 | Dial MX2-3DCMC | 8,413 units | All serials distributed 25 Apr 2022 to 8 Jul 2025 |
The stored quantities for the August 2025 event add up to 49,636 units, and for the 2023 watch event to 25,101 units, by our arithmetic; the December 2024 event's quantity is stored as "unknown". These are counts of units in commerce, as filed, not counts of problems, and a recall is not a safety rating or a comparison with other devices. openFDA's disclaimer says "Do not rely on openFDA to make decisions regarding medical care."
The recalls are not US-only. The distribution on the FDA page for Z-2538-2025 lists every US state, DC and PR, and the enforcement record for Z-2538-2025 adds, outside the US, countries including CAN, GBR, AUS, NZL, JPN, SWE, MEX and BRA; the 2023 watch records say "Worldwide distribution." Outside the US, ask your national regulator or dealer how the recall was handled where you live.
The PushTracker watch recall, 2023
The reason stored for Z-2004-2023 and Z-2005-2023 is: "When multiple processes are running on the watch's Central Processing Unit (CPU), the application may fail unexpectedly. If this happens, the motor on the power assist device continues to run and the user may not be able to stop the device using tap gestures."
The FDA recall page for the E2 says customers were told to "update their software to SmartDrive MX2+ Version 1.1.00"
and "to discontinue using the affected device while waiting for the correction"
. The scope is the software versions named, not every PushTracker.
The SpeedControl Dial recalls, 2024 and 2025
The first dial recall, initiated on 20 December 2024, gives the reason "faulty circuit board in speed control remote"
, as stored. An FDA web page dated 7 April 2025 reposts a Max Mobility / Permobil release marked "FOR IMMEDIATE RELEASE: April 4, 2025"
(the FDA page gives the company announcement date as April 07, 2025), saying that the recall was expanded to "all Speed Control Dials manufactured and distributed between the dates of August 17, 2023, through March 10, 2025"
, because recalled product "may have been inadvertently comingled with redesigned product"
, the FDA recall page for Z-1116-2025 says. The openFDA records still store the original scope. Permobil's August 2025 release dates the expansion to "March 28, 2025". The FDA page is a company announcement, and the page says "FDA does not endorse either the product or the company."
That announcement says "As of March 27, 2025, Max Mobility/Permobil has received 781 complaints associated with the Speed Control Dial"
and that "five (5) serious injuries have been reported for this issue"
, listing fractures and a concussion. These are the firm's complaint counts, as it reported them.
The second event, initiated on 12 August 2025, covers dials distributed from 25 April 2022 to 8 July 2025, as stored, which Permobil says is every dial. Permobil's release says it "applies to all SpeedControl Dials manufactured and distributed between the dates of April 25, 2022 to July 08, 2025"
and "supersedes the previous recall"
, including replacement dials. It gives the reason as a design issue with an intermittent electrical connection, which could cause "Continued drive" or "Involuntary movement", and says Permobil "has identified 54 complaints that may be associated with this issue. Of these complaints, two (2) involve serious injuries related to bone fractures."
The FDA's page for Z-2538-2025 heads it "Class 1 Device Recall Smart Drive MX2 SpeedControl Dial"
.
What to do, in Permobil's words: "Immediately discontinue use of the SpeedControl dial"
, and use "A wired SwitchControl" or "the SmartDrive MX2+ App utilizing an Apple Watch or Samsung Galaxy Watch"
. The release gives the technical support line 615-257-2930 and order inquiries at 1-800-736-0925 ext. 6. To report a problem to the FDA, the release names MedWatch, online at accessdata.fda.gov/scripts/medwatch or by calling 800-332-1088 for a form. For every Permobil recall, including its power chairs, see our Permobil guide.
How to buy a SmartDrive
- Assessment. Ask your physician for a referral to a physical or occupational therapist who assesses wheelchairs, and ask for a trial. For Medicare, the specialty evaluation and the face-to-face encounter are required, as above.
- Supplier. If you want Medicare to cover it, L33789 requires a supplier that employs a RESNA-certified ATP; confirm that it is enrolled in Medicare and accepts assignment. Permobil's order form is a dealer form, and its warranty documents for other products say service goes through
"the dealer from whom the product was purchased"
. - Specification. Give the dealer your chair's make, model, frame type, rear wheel size, axle tube size or folding width, and your weight. Agree the control (SwitchControl buttons, mono jack, or a watch) and the speed setting.
- Quote. Ask for a written quote naming part MX2-162, the control, the mounting hardware and any accessories, and compare it with Permobil's $7,529.00 MSRP and $6,626.00 MAP.
- Delivery and training. The manual's
"SmartDrive MX2+ Training Certification"
asks the user to"Demonstrate each of the skills to your dealer"
and to sign the form, which the provider keeps"with the client's records"
. Do it, keep a copy, and write down the serial number from the unit's underside. - After delivery. Update the firmware through the app, check the clamp angle after any change to the chair, and keep the manual, certificate and receipt together.
Permobil's US support numbers are 800-736-0925, which Permobil's contact page lists for "all TiLite and SmartDrive Products"
, and the manual's Max Mobility numbers, 800-637-2980 and 615-953-5350. Buying second hand? Check that the unit does not come with a SpeedControl Dial, that the watch software is current, and that the seller hands over the clamp or bar for your chair; see our used wheelchair guide.
Three traps
Trap one: reading a code as coverage. Permobil prints E0986, but Medicare's rule covers a power assist only for someone who meets every criterion, including a year of self-propelling and an independent specialty evaluation, and after the Part B deductible, you pay 20% of the approved amount only if the supplier accepts assignment. Ask the supplier, in writing, what you would pay.
Trap two: planning on the lightest weight figure. Permobil prints 12.5 lb and 13.2 lb for the drive unit and, for the whole assembly, 14.4 lb; 1800wheelchair repeats 12.5 lbs (5.7 kg), Wheel Freedom gives "5.7kg / 0st 13lb" and our catalog 5.7 kg. Plan on 14.4 lb against your chair's weight limit, and on the manual's 351 lb combined user and chair maximum, until Permobil or the dealer confirms otherwise in writing. A seller's field can also differ from the maker's, as Sportaid's "80 - 250 lbs." user weight field does; plan on that narrower range if you order there, until the seller and Permobil confirm.
Trap three: keeping a recalled control. Some seller pages still describe the SpeedControl Dial as standard. Permobil says every dial is recalled and users should stop using it. A smaller trap is the range figure: 12.3 miles is a ceiling for level ground, not a daily plan.
Three composite scenarios
These are composite scenarios, not individual customers. They use only facts already in this guide.
Scenario one: a full-time manual chair user on Medicare has self-propelled for several years and has been offered a SmartDrive for hills at home and in town. They ask their physician for a specialty evaluation by a PT or OT with no financial tie to the supplier, and choose a supplier with a RESNA-certified ATP. They also ask the therapist whether they meet the rule's general criteria (A to C), including the upper-extremity criterion quoted above. They ask, in writing, what they would pay if the supplier accepts assignment, and they note that the rule asks about need in the home: a need only outside the home is flagged with the GY modifier.
Scenario two: a buyer paying privately in the US compares Permobil's $7,529.00 MSRP with Sportaid's "Cost: $6,626.00" and 1800wheelchair's $6,675. They confirm that the quote includes SwitchControl buttons and the axle clamp for their 24 inch wheels, ask why Sportaid's weight field says 80 to 250 lb when Permobil prints 30 to 331, and accept that Sportaid's page says the unit cannot be returned once bought.
Scenario three: a user plans a flight. They carry Permobil's IATA certificate, which gives the battery as 122 Wh, switch the drive unit off, take it off the chair, keep it in the cabin stored so it cannot switch on or be damaged, and ask that the pilot-in-command be told where it is, as the certificate's conditions require; the certificate does not cover a damaged or defective battery. They ask the airline in advance, because the FAA says airlines "may have more restrictive rules"
, and they leave the clamp on the chair.
Questions to ask the therapist and the dealer
- Do I meet the manual's prerequisites, and which control (buttons, mono jack switch or watch) can I use safely?
- Does my chair meet Permobil's compatibility table: frame, wheel size, axle tube or folding width?
- What do my chair and I weigh together, and does that fit the 351 lb combined maximum?
- Which clamp or adaptor bar will you fit, and what does a replacement cost?
- What speed and acceleration will you set at delivery, and will you train me on the training form?
- Which firmware version is installed, and how do I update it?
- Are you enrolled in Medicare, do you accept assignment, and what would I pay?
- When does the two-year warranty start, and does it pass to a second owner?
Choose a power assist with the therapist who knows your shoulders, posture and transfers, and with an ATP who has seen your chair. If no one has assessed your seating and propulsion recently, ask your physician for a referral before you spend money.
Your plan: 10 minutes, today, this week
In 10 minutes: write down your chair's make, model, frame type, rear wheel size and your weight, and compare them with the compatibility table above.
Today: if you already own a SmartDrive, check which control you use. If it is a SpeedControl Dial (MX2-3DC, MX2-3DCK or MX2-3DCMC), stop using it and call Permobil's technical support. Update the app and firmware.
This week: book a therapist assessment if you are considering one, and get a written quote naming part MX2-162, the control and the mounting from a supplier who will train you.
Sources and documents
Product: Permobil's US SmartDrive MX2+ page (read 27 October and 5 November 2026), user's manual, IATA certificate, axle clamp and folder insert instructions, PushTracker E2 manual, SwitchControl and enhancements sheets, read 5 November 2026; the brochure and May 2026 US order form, read 27 October 2026. Prices: Permobil's SmartDrive MAP 2026 sheet and Sportaid's search page, read 27 October 2026; Sportaid, 1800wheelchair, Anderson Wheelchair, John Preston, Wheel Freedom and Wheelchair Sales and Service, read 5 November 2026. Codes and Medicare: CMS LCD L33789 (current and future versions) and article A52498 (future-effective version), read 5 November 2026; Medicare.gov's wheelchairs and scooters page, read 10 October 2026; Permobil's funding guide, read 27 October 2026. Warranty: the manuals above and Permobil's legal page, read 27 October 2026. Recalls: openFDA searches and the 510(k) record, read 5 November 2026; the earlier openFDA download, read 27 October 2026; the FDA's company announcement page, three FDA recall pages and Permobil's August 2025 release, read 10 October 2026. Travel: the FAA's PackSafe page, read 10 October 2026. Catalog: row PA-008, for non-price facts.
Related guides on Mobility Atlas: Power add-ons for manual wheelchairs; Permobil; Lightweight wheelchairs; Flying with a power chair; Power wheelchair batteries; Rigid or folding; Used wheelchairs.
Method in brief: how we compared is set out near the top. We read each page and PDF as text, saved extracts with the read date, and quote only text saved word for word; numbers were checked by script against the saved files, and quotes were checked against them. The restored manual figures, price differences, VAT sums and recall counts were computed by script. We tested no device, placed no order and made no calls.
Prices checked November 2026 on the sellers' pages (5 November 2026), and on Permobil's MAP sheet and order form on 27 October 2026; prices change, so confirm them with the dealer. Documents checked November 2026: Permobil's SmartDrive manuals and sheets, the CMS rule and the openFDA records, with Medicare.gov, the FAA page and the FDA recall pages as read in October 2026.
If you want us to find a SmartDrive, a replacement control or a clamp your therapist or dealer has named, send an enquiry with your chair's make and model, wheel size, the control you want and your town, and ask us to find it or request a quote.
This article is general information. Rules and prices differ by country and change, so confirm them before you buy or travel.
Common questions
How much does a SmartDrive cost?
Permobil's 2026 SmartDrive sheet lists the MX2+ system at $7,529.00 MSRP and $6,626.00 MAP. On 5 November 2026 Sportaid (US) showed "Cost: $6,626.00", 1800wheelchair (US) a default "Total:" of $6,675, John Preston (Ireland) "€6,026.25 VAT Exempt" plus mounting, and Wheel Freedom (UK) £4,821 exc VAT. Prices differ by country, seller, set-up, VAT relief and funding; get a written quote.
How far and how fast does the SmartDrive MX2+ go?
Permobil's manual gives a range of up to 12.3 miles (19.8 km) on level ground with no resistance, and a top speed of 4 mph by default or 5.5 mph optional, which it says may be restricted in some regions. These are ceilings: the manual says performance varies with user and chair characteristics, driving and battery conditions.
Will the SmartDrive fit my wheelchair?
Permobil's manual lists rigid, folding, tilt-in-space and one-arm drive frames, 22, 24, 25 or 26 inch drive wheels, users of 30 to 331 lb (one US seller's order field says 80 to 250 lb; confirm with the seller) and a combined user and chair maximum of 351 lb. Rigid chairs use an axle clamp chosen by rear wheel size, with inserts for the axle tube; folding chairs use an adaptor bar. Your dealer and chair maker confirm the fit.
Can I take a SmartDrive on a plane?
Permobil's IATA certificate gives the MX2+ battery as 122 Wh and says it may be carried on passenger aircraft if the unit is switched off, removed from the chair and kept in the cabin, stored so it cannot switch on or be damaged by moving baggage, with the pilot told where it is. The certificate does not apply to damaged or defective batteries. Airlines may have stricter rules; ask yours before you fly.
Does Medicare cover the SmartDrive?
Permobil prints HCPCS E0986. CMS rule L33789 covers a power assist system only if all criteria are met, including the power mobility criteria, a year of self-propelling a manual chair, a specialty evaluation by a licensed or certified medical professional such as a PT or OT, or a practitioner with specific training and experience in rehabilitation wheelchair evaluations, and a supplier employing a RESNA-certified ATP who specializes in wheelchairs and is directly involved in selecting the chair. After the Part B deductible, you pay 20% of the Medicare-approved amount if the supplier accepts assignment. A code is not coverage.
Has the SmartDrive been recalled?
openFDA holds 7 recall records naming SmartDrive, all for controls: two for PushTracker E2 and E3 watch software (2023) and five for the SpeedControl Dial (2024 and 2025). Permobil says every dial is recalled and users should stop using it; the drive unit itself is not named as recalled. A recall is not a safety rating.
Sources
- Permobil (US): SmartDrive MX2+ Wheelchair Power Assist product page (read 27 October and 5 November 2026)
- Permobil / Max Mobility: SmartDrive MX2+ User's Manual (read 5 November 2026)
- Permobil: SmartDrive Airline Passenger IATA Certificate, SDAC-001 Rev. D
- Permobil / Max Mobility: SmartDrive MX2 Axle Clamp Instructions, Rev. MX2 CM-D
- Permobil / Max Mobility: SmartDrive MX2 Folder Inserts Instructions, Rev. MX2 IN-E
- Permobil / Max Mobility: SmartDrive MX2+ and PushTracker E2 User Manual
- Permobil: SmartDrive SwitchControl information sheet, SDMX2 MK-006 Rev. A
- Permobil: SmartDrive enhancements information sheet, SDMX2 MK-014 Rev. A
- Permobil: SmartDrive brochure MKTG0112-01 (read 27 October 2026)
- Permobil: SmartDrive US Order and Request for Quote Form, May 2026 (read 27 October 2026)
- Permobil (US): 2026 MAP Pricing page and SmartDrive MAP 2026 sheet (read 27 October 2026)
- Permobil (US): Legal terms and conditions, warranty information (read 27 October 2026)
- Permobil: Power Wheelchair Digital Guide, funding (read 27 October 2026)
- Permobil (US): TiLite Z order form, July 2026 (read 27 October 2026)
- Permobil (US): This is Permobil and contact pages (read 27 October 2026)
- Permobil: press release, worldwide expanded recall of all SpeedControl Dials, 12 August 2025 (read 10 October 2026)
- FDA: company announcement page, Max Mobility / Permobil expands recall of SmartDrive Speed Control Dial, 7 April 2025 (read 10 October 2026)
- FDA: recall Z-1116-2025, SpeedControl Dial (read 10 October 2026)
- FDA: recall Z-2004-2023, PushTracker E2 (read 10 October 2026)
- FDA: recall Z-2538-2025, SpeedControl Dial (read 10 October 2026)
- openFDA: device recalls, product description smartdrive (7 records, read 5 November 2026)
- openFDA: device enforcement reports, product description smartdrive (read 5 November 2026)
- openFDA: device recalls, recalling firm Permobil, TiLite, Max Mobility, ROHO (read 27 October 2026)
- openFDA: 510(k) K151199, SmartDrive Wheelchair Power Assist (read 5 November 2026)
- CMS: LCD L33789 Power Mobility Devices, version in effect 10/01/2025 to 12/19/2026 (read 5 November 2026)
- CMS: LCD L33789 Power Mobility Devices, future version effective 12/20/2026 (read 5 November 2026)
- CMS: Article A52498 Power Mobility Devices - Policy Article, future-effective version (effective 12/20/2026), read 5 November 2026
- Medicare.gov: Wheelchairs and scooters (read 10 October 2026)
- FAA: PackSafe, wheelchairs and mobility devices (read 10 October 2026)
- Sportaid: SmartDrive MX2+ Power Assist by Max Mobility (read 5 November 2026)
- Sportaid: search results for smartdrive (read 27 October 2026)
- 1800wheelchair: SmartDrive MX2+ (read 5 November 2026)
- Anderson Wheelchair: Smart Drive MX2+ Manual Wheelchair Power Assist (read 5 November 2026)
- John Preston Healthcare Group (Ireland): SmartDrive MX2+ Wheelchair Power Assist (read 5 November 2026)
- Wheel Freedom (UK): SmartDrive MX2+ Power Add-On (read 5 November 2026)
- Wheelchair Sales and Service (Australia): Smartdrive MX2+ (read 5 November 2026)
Read on . The wording of the article is our own.
