Sentra EC Heavy-Duty Extra-Extra-Wide
Bariatric / heavy duty. Very high capacity steel folding wheelchair with extra-wide seats.
from US$1,072

The Invacare Tracer IV is a heavy-duty manual wheelchair with a carbon steel frame, a double cross-brace and reinforced upholstery. The standard frame carries 350 lb and an optional build carries 450 lb. Seats run from 18 to 24 inches wide, and a hemi seat height of 17.5 inches is offered next to the 19.5 inch adult height.
You can order the Invacare Tracer IV through Mobility Atlas with delivery to Australia, New Zealand, the Gulf, Southeast Asia, Israel, Latin America, the United States and most other countries. Send an enquiry with your country, and Anna replies within 24 hours with a written quote. Our price is US$593 before delivery.
A daily chair for heavier users who want a plain, hard-wearing steel frame. The hemi seat height helps people who propel with their feet, and the removable arms and swing-away footrests clear the way for transfers.
The same units on every product, converted from the specifications below. Where a source gives two limits, the lower one is shown.
As printed by the maker or the seller on 13 November 2026. Send us the number from your quote or the product label and we match it before we buy.
Published by the maker or the seller, seen on 13 November 2026. Ask for them with your enquiry and we send them with the quote.
| Chair weight | 41-55 lb depending on configuration |
|---|---|
| Max user weight | 350 lb (450 lb option) |
| Seat widths | 18 / 20 / 22 / 24 in |
| Seat depth | 18 or 20 in |
| Seat-to-floor height | 17.5 in hemi or 19.5 in adult |
| Back height | 16 in |
| Overall width | seat width + 8.5 in |
| Frame | Carbon steel, silver vein finish |
| Casters | 8 x 1.25 in (350 lb) or 8 x 1.75 in (450 lb) |
| Warranty | 5 years limited on frame and cross-braces |
| Brand country | USA |
| Rear wheel sizes | 24 in |
| Caster wheel sizes | 8 x 1.25 in (350 lb version) or 8 x 1.75 in semi-pneumatic (450 lb version) |
| Brand | Invacare |
| Category | Everyday manual wheelchairs, Bariatric / heavy duty |
| Catalog ID | MW-056 |
Compared with the source page; product details last checked on 13 November 2026. Details can change, so we confirm them in your quote.
Warranty terms shown above are the ones published by the maker or retailer. Ask us how they apply to a product bought through us and shipped to your country.
Figures as on each product page, in the same units.
The standard frame is rated for 350 lb. A 450 lb frame is available as an option and uses wider 8 x 1.75 inch casters.
Between 41 and 55 lb depending on capacity and seat size. The 350 lb frame is listed at 42 lb without front rigging.
Our price is US$593 before delivery, set on 28 October 2026; the written quote adds delivery and any import duties.
Yes. Mobility Atlas delivers it to Australia, New Zealand, the Gulf, Southeast Asia, Israel, Latin America, the United States and most other countries; our price is US$593 before delivery, and Anna sends a written quote with delivery to your country within 24 hours. As a rough guide, items in stock at a US or European supplier usually arrive in one to three weeks, and chairs built to order in four to ten weeks. Delivery for an item like this starts at about US$350; the Ordering section on this page has the details on cost, payment and cancellation.
PulsCar, LLC, the US company that runs Mobility Atlas, buys it from the maker or a dealer and resells it to you. Anna, the founder, handles every order herself. Mobility Atlas is an independent buying service, not an official Invacare dealer.
Yes, with a full refund, until the product has been bought for you. Payment is taken only after you accept the written quote.
Press Add to enquiry, add any other products or parts, and send the list with your country, sizes and options. We do not ask for payment details.
We check availability with the maker or a dealer and send you a price with delivery to your country.
If you accept the written quote, we buy the product and arrange delivery to you. Nothing is charged before that.
Mobility Atlas is an independent buying service. We are not an official dealer of Invacare. How ordering works · Delivery, payment and returns
Bariatric / heavy duty. Very high capacity steel folding wheelchair with extra-wide seats.
from US$1,072
Rigid-frame active / ultralight. Highly configurable aluminium rigid chair with an oval-tube frame aimed at maximum push efficiency.
from US$2,481
Rigid-frame active / ultralight. Aluminium mono-tube rigid chair built to order with a very wide range of configuration options.
from US$2,214
Rigid-frame active / ultralight. Modular rigid active chair with a multi-position seat and a folding, angle-adjustable backrest.
from US$3,195
Their source pages name this model or this brand. We confirm the fit for your chair before quoting.
Legrests and footplates. Pair of tool-free swing-away elevating legrests with padded calf pads and composite footplates.
US$68
Handrims - ergonomic. An oval ergonomic handrim offered in two profiles, Surge and Surge LT, with tab and rivnut mount options.
US$327
Caster bearings. A four-pack of 608 bearings with rubber seals for caster wheels on an 8 mm axle.
US$23
Seat upholstery. Replacement seat upholstery for Invacare and Top End wheelchairs, supplied with seat rails.
US$137
Legrests and footplates. Aluminium replacement footplate described as compatible with most Invacare front riggings.
US$126
This chair is listed with 24 in rear wheels, but no size code. These tyres and tubes share the nominal inch size only; the same inch name covers different rims and widths, so they may not fit. Read the size code on the side of your tyre (for example 25-540) and send it with your enquiry; we match it before quoting.
Tires - puncture-resistant pneumatic. Heavily puncture-protected pneumatic tyre with a low-marking compound and grippy sidewalls.
US$62
Inner tubes. A standard 24 x 1 in wheelchair inner tube with a straight Schrader valve, sold singly by the US retailer Sportaid.
US$9
Inner tubes. A 24 x 1 in wheelchair inner tube with a Presta valve for rims drilled with the narrower valve hole.
US$9