Nitrum
Rigid-frame active / ultralight. Highly configurable aluminium rigid chair with an oval-tube frame aimed at maximum push efficiency.
from US$2,481

The TiLite Z is an aluminium rigid wheelchair from Permobil with a mono-tube frame, made to order for each user. Its transport weight is 11.3 lb and the standard frame carries 275 lb, with a heavy duty option rated to 350 lb. Permobil lists more than a billion possible configurations, including four seat slopes and four backrest angles.
You can order the TiLite Z through Mobility Atlas with delivery to Australia, New Zealand, the Gulf, Southeast Asia, Israel, Latin America, the United States and most other countries. Send an enquiry with your country, and Anna replies within 24 hours with a written quote. Our price is from US$2,214 before delivery.
Aimed at active users who want a performance rigid chair made to their measurements and are ready to choose from a long options list. The heavy duty build makes the same design available to heavier riders up to 350 lb.
The same units on every product, converted from the specifications below. Where a source gives two limits, the lower one is shown.
As printed by the maker or the seller on 13 November 2026.
Published by the maker or the seller, seen on 13 November 2026. Ask for them with your enquiry and we send them with the quote.
| Transport weight | 11.3 lb |
|---|---|
| Max user weight | 275 lb (350 lb heavy duty) |
| Seat widths | 12 to 20 in |
| Back heights | 12 to 20 in |
| Frame | Aluminium mono-tube, rigid |
| Seat slope | 0, 2, 4 or 6 degrees |
| Backrest angle | 75, 80, 85 or 90 degrees |
| Options | Transit tie-down, transport bracket |
| Brand country | USA |
| Rear wheel sizes | 20, 22, 24, 25 or 26 in (rim 451, 501, 540, 559, 590 mm) |
| Caster wheel sizes | 3, 4, 5 or 6 in |
| Brand | TiLite (Permobil) |
| Category | Everyday manual wheelchairs, Rigid-frame active / ultralight |
| Catalog ID | MW-002 |
Compared with the source page; product details last checked on 13 November 2026. Details can change, so we confirm them in your quote.
Figures as on each product page, in the same units.
Permobil gives a transport weight of 11.3 lb for the TiLite Z.
Yes. The standard chair is rated for a 275 lb user and the heavy duty option raises that limit to 350 lb.
Seat widths run from 12 in to 20 in, and the chair is built to order within that range.
Yes. Mobility Atlas delivers it to Australia, New Zealand, the Gulf, Southeast Asia, Israel, Latin America, the United States and most other countries; our price is from US$2,214 before delivery, and Anna sends a written quote with delivery to your country within 24 hours. As a rough guide, items in stock at a US or European supplier usually arrive in one to three weeks, and chairs built to order in four to ten weeks. Delivery for an item like this starts at about US$350; the Ordering section on this page has the details on cost, payment and cancellation.
PulsCar, LLC, the US company that runs Mobility Atlas, buys it from the maker or a dealer and resells it to you. Anna, the founder, handles every order herself. Mobility Atlas is an independent buying service, not an official TiLite dealer.
Yes, with a full refund, until the product has been bought for you. Payment is taken only after you accept the written quote.
Press Add to enquiry, add any other products or parts, and send the list with your country, sizes and options. We do not ask for payment details.
We check availability with the maker or a dealer and send you a price with delivery to your country.
If you accept the written quote, we buy the product and arrange delivery to you. Nothing is charged before that.
Mobility Atlas is an independent buying service. We are not an official dealer of TiLite. How ordering works · Delivery, payment and returns
Rigid-frame active / ultralight. Highly configurable aluminium rigid chair with an oval-tube frame aimed at maximum push efficiency.
from US$2,481
Rigid-frame active / ultralight. Modular rigid active chair with a multi-position seat and a folding, angle-adjustable backrest.
from US$3,195
Rigid-frame active / ultralight. Carbon-fibre rigid chair combining very low weight with adjustable geometry.
from US$4,683
Rigid-frame active / ultralight. Made-to-measure titanium rigid chair whose frame is guaranteed to come in under 4 kg.
from US$11,010
Rigid-frame active / ultralight. Aluminium rigid chair designed for responsive handling and easy car loading.
from US$2,313
Their source pages name this model or this brand. We confirm the fit for your chair before quoting.
Brakes / wheel locks. A pair of extension handles with lanyards for the composite wheel locks on TiLite chairs.
US$98
Side guards. Very light solid carbon side guards on two aluminium posts that keep clothing off the wheels.
US$178
Caster bearings. A four-pack of 608 bearings with rubber seals for caster wheels on an 8 mm axle.
US$23
Caster bearings. A kit of four caster bearings and two spacers, offered in standard, stainless, ceramic and TiLite versions.
from US$12
Out of stock at source
Caster wheels. A 4 x 1.4 in soft-roll caster wheel from TiLite, sold singly in black or silver.
US$169
This chair is listed with 20, 22, 24, 25 or 26 in rear wheels, but no size code. These tyres and tubes share the nominal inch size only; the same inch name covers different rims and widths, so they may not fit. Read the size code on the side of your tyre (for example 25-540) and send it with your enquiry; we match it before quoting.
Tires - puncture-resistant pneumatic. Heavily puncture-protected pneumatic tyre with a low-marking compound and grippy sidewalls.
US$62
Inner tubes. Basic Schrader-valve inner tube from Kenda's wheelchair tube range.
US$11
Inner tubes. A standard 24 x 1 in wheelchair inner tube with a straight Schrader valve, sold singly by the US retailer Sportaid.
US$9
All 20 in tyres, tubes and wheels
All 22 in tyres, tubes and wheels
All 24 in tyres, tubes and wheels