USD 24.99 per 4-pack (Wheelchair Bearings)
R8 1/2 in ABEC-5 Rear and Fork Bearings (4-Pack)
Wheel bearings. A four-pack of R8 bearings with rubber seals for rear wheels and forks on chairs with a 1/2 in axle.
Wheelchair Bearings
Photo could not be loaded
Wheelchair Bearings · Wheel bearings · AC-248
Wheelchair Bearings SR8 stainless steel bearings, 4-pack
SR8 is the stainless steel counterpart of the R8 bearing, with the same 1/2 x 1-1/8 x .3125 in dimensions. This four-pack is intended for shower wheelchairs, where ordinary steel bearings corrode. The bearings are ABEC-1, closed with rubber seals and packed with Multemp SRL water-resistant grease. The seller names the RAZ SP shower chair and other shower chairs with a 1/2 in axle.
- Bearing size
- SR8
- Material
- Stainless steel
- Inner diameter
- 1/2 in
- Outer diameter
- 1-1/8 in
Wheelchair Bearings SR8 Stainless Steel Shower Wheelchair Bearings (4-Pack) key features
- Stainless steel SR8 bearing
- 1/2 x 1-1/8 x .3125 in
- ABEC-1 rating
- Rubber seals with water-resistant grease
- Four bearings per pack
Who the Wheelchair Bearings SR8 Stainless Steel Shower Wheelchair Bearings (4-Pack) suits
Suits shower and commode wheelchairs with 1/2 in axles that take an SR8 bearing, including the RAZ SP named by the seller. It is also an option for everyday chairs used near salt water, if the size matches.
Wheelchair Bearings SR8 Stainless Steel Shower Wheelchair Bearings (4-Pack) specifications
| Bearing size | SR8 |
|---|---|
| Material | Stainless steel |
| Inner diameter | 1/2 in |
| Outer diameter | 1-1/8 in |
| Width | .3125 in |
| Rating | ABEC-1 |
| Seals | Rubber |
| Pack | 4 bearings |
| Listed fit | RAZ SP and other shower chairs with 1/2 in axle |
| Maker country | USA |
| Brand | Wheelchair Bearings |
| Category | Wheels, handrims and tires, Wheel bearings |
| Catalog ID | AC-248 |
Compared with the source page on 5 October 2026. Details can change, so we confirm them in your quote. Open the source page.
Wheelchair Bearings SR8 Stainless Steel Shower Wheelchair Bearings (4-Pack): common questions
Why choose stainless bearings?
They resist rust in wet use, which is why the seller offers them for shower wheelchairs.
Is SR8 the same size as R8?
Yes, the listed dimensions match the R8: 1/2 x 1-1/8 x .3125 in.
Which chairs are named?
The RAZ SP shower wheelchair and other shower chairs with a 1/2 in axle.
How to get a quote for the Wheelchair Bearings SR8 Stainless Steel Shower Wheelchair Bearings (4-Pack)
Add it to your enquiry list
Press Add to enquiry. You can add other products and parts to the same list.
Tell us your country and needs
Send the list with your country, sizes and any options you want. No payment details are asked.
Get a personal reply
You receive availability, a price and delivery options by email, and decide after that.
Similar to the Wheelchair Bearings SR8 Stainless Steel Shower Wheelchair Bearings (4-Pack)
All Wheels, handrims and tiresUSD 24.99 per 4-pack (Wheelchair Bearings)
R10 5/8 in ABEC-5 Rear Wheel Bearings (4-Pack)
Wheel bearings. A four-pack of R10 bearings for rear wheels that run on a 5/8 in axle, such as Spinergy R-10 models.
USD 82.00 per pair (Spinergy)
R8 Ceramic Hybrid Bearings
Wheel bearings. A pair of ceramic hybrid R8 deep-groove bearings for 1/2 in axle wheelchair wheels.
USD 1,065 per pair (manufacturer list)
Lite Extreme LX
Rear wheels - fibre-spoked. Everyday rear wheelset with 12 radially laced PBO fibre spokes that damp vibration and leave room to reach through the wheel.
Chairs and other parts
Guides for this kind of product
How-to & Maintenance · 8 min read
Tire and caster care in 15 minutes
Soft tires and hair-wrapped casters make every push harder. This short routine keeps both in order and tells you when parts need replacing.