Pre-order at source
GBP 96.93 ex tax per fork (EPC Wheelchairs); no USD price shown
61mm Anti Tip Fork Assembly
Caster forks. A sports anti-tip caster fork assembly for 61 mm caster wheels on RGK Elite and Grand Slam chairs.
Reckless Wheelchairs
Photo could not be loaded
Reckless Wheelchairs · Caster forks · AC-258
Reckless Wheelchairs single arm caster fork, pair
This is a one-sided caster fork from Reckless Wheelchairs, sold as a pair. Each fork is fitted with R8-2RS ABEC-5 bearings and weighs 134 g with them installed. Three axle holes spaced 12 mm apart allow the caster height to be changed, and the fork measures 90 mm from the top of the bearing to the lowest hole. Mono axles for 8 mm casters are included; the fork stem is not.
- Type
- Single-arm caster fork
- Sold as
- Pair
- Bearings
- R8-2RS ABEC-5
- Weight
- 134 g (4.8 oz) with bearings
Reckless Wheelchairs Single Arm Fork With Axles and Spacer key features
- Single-arm design, sold as a pair
- R8-2RS ABEC-5 bearings fitted
- 134 g (4.8 oz) each with bearings
- Three axle holes at 12 mm spacing
- For 8 mm caster axles and 25 mm hubs
- Mono axles included, fork stem not included
Who the Reckless Wheelchairs Single Arm Fork With Axles and Spacer suits
Suits users of rigid chairs who run 1 in wide casters with 8 mm bearings and want a lighter front end. The existing fork stem bolt must suit the R8 bearings. Replacement mono axles are listed separately by the seller.
Reckless Wheelchairs Single Arm Fork With Axles and Spacer specifications
| Type | Single-arm caster fork |
|---|---|
| Sold as | Pair |
| Bearings | R8-2RS ABEC-5 |
| Weight | 134 g (4.8 oz) with bearings |
| Height | 90 mm (3.55 in) |
| Axle holes | 3, at 12 mm spacing |
| Caster axle | 8 mm |
| Hub spacing | 25 mm (1 in) |
| Included | Mono axles |
| Not included | Fork stem |
| Maker country | Not confirmed |
| Brand | Reckless Wheelchairs |
| Category | Casters, forks and front attachments, Caster forks |
| Catalog ID | AC-258 |
Compared with the source page on 5 October 2026. Details can change, so we confirm them in your quote. Open the source page.
Reckless Wheelchairs Single Arm Fork With Axles and Spacer: common questions
Is the fork stem supplied?
No. Mono axles are included, but the fork stem is not.
Which casters fit?
Casters with an 8 mm axle bore and a 25 mm (1 in) hub.
Can caster height be adjusted?
Yes, there are three axle holes spaced 12 mm apart.
How to get a quote for the Reckless Wheelchairs Single Arm Fork With Axles and Spacer
Add it to your enquiry list
Press Add to enquiry. You can add other products and parts to the same list.
Tell us your country and needs
Send the list with your country, sizes and any options you want. No payment details are asked.
Get a personal reply
You receive availability, a price and delivery options by email, and decide after that.
Similar to the Reckless Wheelchairs Single Arm Fork With Axles and Spacer
All Casters, forks and front attachmentsUSD 299.99 per pair (manufacturer)
Phase I Suspension Fork
Suspension caster forks. Shock-absorbing caster fork pair that soaks up impacts and helps casters ride over small obstacles.
Out of stock at source
USD 499.99 per set (manufacturer)
Frog Legs II Carbon Fiber Suspension System
Suspension caster forks. Composite-blade suspension fork set supplied with soft-roll casters and bearings.
USD 159.98 per pair (manufacturer)
EPIC Aluminum Wide Softroll Caster
Caster wheels. Machined aluminium-hub caster with an arched solid urethane tread that pivots easily and resists sinking into carpet.
from USD 199.99 per pair (manufacturer)
Whisper Shock Absorber Wheel
Caster wheels. Shock-absorbing caster wheel sold in pairs within the Frog Legs range.
Chairs and other parts
Guides for this kind of product
How-to & Maintenance · 8 min read
Tire and caster care in 15 minutes
Soft tires and hair-wrapped casters make every push harder. This short routine keeps both in order and tells you when parts need replacing.