Independent buying service: send one enquiry, get a personal quote with delivery to your country How it works →
Mobility Atlas
Find it for me Request a part

Invacare wheelchair parts in 2026: part numbers, parts catalogs, legrests, armrests, wheels, wheel locks, upholstery and prices

Invacare wheelchair parts by the catalog: Tracer SX5, Tracer IV and 9000 part numbers, legrest fit, wheel locks, upholstery, US prices and warranty terms.

45 min read · By , founder of Mobility Atlas ·

Contents

The short answer

Invacare wheelchair parts are ordered by Invacare part number, and the number that fits your chair depends on three things printed on or under the chair: the model, the front rigging or option series, and the serial number. Invacare's own parts catalogs for the Tracer SX5, Tracer IV, 9000 series and 9000 Jymni split many parts by build date. The legrest support assembly for the T94H series, for example, has one parts table for T94H legrests "Before 5/16/19" and another for those "After 5/15/19", and the wheel lock tables change on dates in 2003 and 2007. So the first job is to read the label, and only then to look up the part.

Invacare America publishes those catalogs free of charge. Its Pro website lists 732 manual wheelchair service parts and 27 power parts groups, and for each manual chair family it links a "Parts PDF Catalog". We read four of them on 12 November 2026: the Tracer EX2, EXI, SX5 and SX5 Recliner catalog (Form 02-016), the Tracer IV catalog (Form 03-030), the 9000SL, 9000XT, 9000XDT and 9000XT Recliner catalog (Form 95-137) and the 9000 Jymni catalog (Form 00-104). Together they run to 591 PDF pages. They print part numbers, but no prices, and Invacare's Pro site showed no prices on the pages we read without signing in.

Prices come from sellers. On 12 November 2026 we read 14 Invacare-branded part lines at three US sellers: ShopINVACARE, Invacare America's own web store, SpinLife and Vitality Medical. They ran from $26.00 for a 4 inch caster that SpinLife lists for the A-4, Crossfire, Reveal and Spree (not the chairs in this guide) to $192.00 for T94HCP elevating legrests at SpinLife. The same legrest number cost very different amounts: the T94HCP legrests were $59.00 a pair at ShopINVACARE and $192.00 at SpinLife, whose listing does not state the quantity, on the same day.

Fit is printed per part, and the pages we read do not always agree. ShopINVACARE says its T94HCP legrests are recommended for Tracer and 9000 chairs "Excluding the 9000 Topaz and 9000 Jymni"; SpinLife's listing says the same legrests are made to fit "Any Invacare manual wheelchair". Vitality Medical's page for the T94HEP legrests says they are "designed for the IVC Tracer EX2 Wheelchair". In our view, order only a part whose page or catalog names your model, and when two pages disagree, get the fit in writing against your serial number before you pay.

Mobility Atlas earns a fee or margin when you order through us; the guide below uses only Invacare's published parts catalogs, manual, policies and web pages, three US sellers' pages and US government records, each read on the date we give, and our own catalog for non-price facts. Mobility Atlas can find and quote Invacare wheelchair parts, including parts that are not listed on any shop page: you send a part request, we send a written quote with delivery to your country, and nothing is charged before you accept it.

This guide covers parts for Invacare's standard manual wheelchairs: the Tracer SX5, Tracer EX2 and EXI, Tracer IV, 9000 SL, 9000 XT, 9000 XDT, 9000 XT Recliner and 9000 Jymni, with a short section on power chairs. Whether a person needs elevating legrests, anti-tippers, a different seat width or a heavier-duty wheel package is a decision for their physical or occupational therapist or physician; this guide explains how to identify and order the part, and stops there.

How we read the documents, and our interest

On 12 November 2026 we opened, in a browser, Invacare America's Pro website: the Service Parts catalog and its Manual Wheelchair Parts, Tracer EX2/EXI/SX5/SX5 Recliner and Power Parts pages, the Standard Wheelchairs equipment page, the FAQ, the Customer Service Policy (effective January 10, 2024) and the Service Repair Policy page. From the Manual Wheelchair Parts page we opened the four "Parts PDF Catalog" files named above and extracted the text of their contents pages and of selected pages for legrests and footrests, armrests, upholstery, rear wheels, casters and wheel locks; each source file lists the pages it holds. We also read the Invacare America home page and Invacare's release of November 11, 2024 about the North American business.

We reused a copy, read on 9 November 2026, of the Tracer SX5 user manual (Part No. 1110550), for its warranty, safety warnings and maintenance checklist. For prices we read, on 12 November 2026, ShopINVACARE's product pages for three front riggings, its search results for "wheelchair parts" and its refund policy; SpinLife's listings for armrests, footrest assemblies, caster wheel assemblies, rear wheel assemblies and wheel locks and its T94HEP product page; and Vitality Medical's pages for the T94HEP legrests and an Invacare anti-tipper. For recalls we read the openFDA device recall endpoint. For Medicare we used the Medicare booklet on equipment and a CGS FAQ for suppliers on complex rehab repairs, both read on 9 November 2026.

We did not order, fit or test any part, and we did not measure any chair. The catalog PDFs are laid out as tables, and when their text is extracted the columns can run together, so for tables with several part numbers in a row we say which row a number sits in rather than guess its column. Where we give advice of our own it is labelled as our view; where we read a rule or a document it is labelled as our reading. None of the prices below is a Mobility Atlas price, and prices and stock change daily.

Who sells Invacare parts in North America in 2026

Invacare's corporate newsroom announced on November 11, 2024 that "MIGA has acquired Invacare's North American business." The release says MIGA Holdings "is owned by the same owners as C+A Global" and quotes Invacare's chief executive as saying "we expect this acquisition to open new opportunities for growth and improvement in service delivery." It names no change to parts, warranty or service. Our Invacare guide covers the ownership history, including the 2023 Chapter 11 case and the later sale of the European business, so we do not repeat it here.

The pages Invacare America runs today still describe a dealer route, which our Invacare guide sets out, beside ShopINVACARE, Invacare America's web store for some front riggings, and online sellers. For parts, the Customer Service Policy adds that "Serial numbers must be furnished when ordering replacement parts and accessories". Three of the four parts catalogs, issued in 2022, print Elyria, Ohio, and all four print the 1-800-333-6900 number for customer service, which the home page also gives.

What we could not find is a published statement about parts availability after the 2024 sale. The page titled Service Repair Policy showed only its heading when we opened it on 12 November 2026. The Customer Service Policy says "Products, services specifications, and availability are subject to change without notice." In our reading, nothing on the pages we read says that Invacare America has stopped supplying parts for any of the chairs in this guide; equally, nothing promises how long it will. The catalogs mark parts that are gone with "NLA", which their usage guide defines as "No Longer Available".

Step one: the model, the series and the serial number

How do you find the right Invacare wheelchair part number? Mobility Atlas read four Invacare parts catalogs on 12 November 2026, and the chair's name is only the start. First, read the model. Second, read the series of the part you are replacing, such as T93H for swing-away footrests or T94H for elevating legrests. Third, read the serial number. Invacare's FAQ says that on a manual wheelchair it is "under the seat on the crossbrace or on the frame", and that "The first two characters designate the year the product was made, and the 3rd character designates the month". The year and month help narrow down which dated table applies; for front riggings the date belongs to the rigging series, so if the riggings may have been replaced, ask the dealer to confirm which table they match. Then open the catalog for your model, find the table for your build date, and copy the number exactly, including any letters.

The Tracer SX5 manual is more precise about where to look. A label diagram on its safety pages says the serial number on a Tracer SX5 non-recliner "is located on right crossbrace" and on the recliner "is located on right frame". Our Invacare guide explains Invacare's serial number format. For power chairs the FAQ says the label is on the frame "and will not be located on any electronic components", and that "you may have to remove the batteries or shroud to locate it".

Why does Invacare insist on the serial number? The Tracer SX5 manual answers in its first danger box: "Use of incorrect or improper replacement (service) parts may cause death, serious injury, or damage. Replacement parts MUST match original Invacare parts." The same box says "ALWAYS provide the wheelchair serial number to assist in ordering the correct replacement parts." The Customer Service Policy adds that without a serial number "Invacare America cannot guarantee accuracy of the parts and accessories being ordered or quoted."

If the label is gone, the chair can still be identified, but more slowly. In our view, photograph the whole chair from the side and front, the front riggings, the wheel locks, the arms and the caster, and measure the seat width and depth. Those photographs let a dealer or a parts seller match the chair to the right catalog pages. The Tracer SX5 warranty also says it "shall not apply to serial numbered products if the serial number has been removed or defaced", so a missing label matters for warranty as well as for ordering.

Step two: open the parts catalog for your chair

Invacare America's Manual Wheelchair Parts page links one PDF catalog per chair family. The table lists the four we read, with the date printed on each cover and the number of PDF pages.

Catalog (Form No.)Chairs coveredIssuedPDF pages
02-016Tracer EX2, EXI, SX5, SX5 ReclinerAug 10, 2022137
03-030Tracer IV (After 9/30/03)Mar 22, 202284
95-1379000SL, 9000XT, 9000XDT, XT ReclinerJul 26, 2022281
00-1049000 JymniAug 30, 202289

The page also links catalogs for the 9000 Topaz and for "Accessories 9000 Series", which we did not open. Each catalog opens with a usage guide. It explains that letters such as A, B and C point to footnotes under each table, that "NLA" marks a part that is no longer available, and how hardware is measured: screws and bolts as "Diameter X Thread Count/Pitch X Length". Each page we copied ends with "To order call toll free 1-800-333-6900, or www.invacare.com".

The contents pages are the quickest way in. The Tracer SX5 catalog, for example, lists separate sections for arms by style and finish, back canes, casters, crossbraces, forks, side frames before 10/12/16 and after 10/11/16, front riggings by series and date, upholstery, wheel locks by style and date, and rear wheels and handrims. The 9000 catalog has ten wheel lock sections, from link-pivot and disk locks to hill holders and a "Canada Only" version.

Read the footnotes under each table before you copy a number. They carry most of the rules that matter when ordering: which parts are sold only as a whole assembly, which spacer a 20 inch wheel needs, which tire to order in pairs, and which chairs to call Invacare about. We quote the footnotes that matter part by part below. The catalog usage guide also says "The information contained in this document is subject to change without notice," so check the date on the cover against your chair's build date.

What the online parts catalog shows

On 12 November 2026 the Pro website's Manual Wheelchair Parts page showed 732 items. Under that heading it shows 6 groups, five chair families and the 9000 accessories. Their own counts add up to 1,276, which is 544 more than the 732 at the top of the page; in our reading some parts sit in more than one group, so the group counts are not separate parts.

Group on the Pro siteItems shown
9000 Jymni196
9000 Topaz157
9000SL, 9000XT, 9000XDT, 9000XT Recliner344
Accessories 9000 Series77
Tracer EX2, EXI, SX5, SX5 Recliner322
Tracer IV180

Inside the Tracer group the site lists 39 subgroups, each with its own link to the PDF. Their names follow the PDF's sections, but not exactly. The online page has a subgroup for T94H legrest supports "bef 051619" but none for the version after that date, and its "Upholstery - Seat" subgroup shows one item. In our reading, the online list is a shortcut, and the PDF catalog is the fuller record.

Each item shows a description and an "ITEM #", such as "WH CMPLT HD W/FF W/HDNRM 24 IN" with ITEM # 1066419. No price was shown on the pages we read without signing in. The site offers an XLS download of the list. The FAQ says owner's manuals are on each product's page and that "If the owner's manual is not listed, please call our Customer Success team".

Legrests and footrests: T93H and T94H

Invacare calls the parts in front of the seat "front riggings". In the Tracer and 9000 catalogs, the T93H series is the swing-away footrest and the T94H series is the elevating legrest, each with G versions (GT93H, GT94H). The contents pages say the catalogs split both series by date: "T93H Series Before 5/16/19" and "After 5/15/19", and the same for T94H. If your chair or its riggings were built before 16 May 2019, you need the older table; a serial number showing May 2019 could fall either side, so ask the dealer to confirm.

The T94H legrest support assembly

The T94H "After 5/15/19" table prints the same two assembly numbers in all 3 catalogs we read for it, the Tracer SX5 (02-016), Tracer IV (03-030) and 9000 (95-137): 1194381 for "Legrest Support Assembly, Hemi, Black - Right" and 1194382 for the left. Below the table come the parts you can order one by one: the cam (1037125), the release handle (1037126), the release spring (1037485), the ratchet bar (42326X001), the leaf spring (48823X008) and the legrest pad plate (04526X019), among others.

Not every part in the drawing can be bought. The Tracer SX5 catalog's footnote says "Items 2, 17, 18, 20, 21 are not available for sale. Order item #1 for replacement." The Tracer IV and 9000 catalogs print the same footnote without item 21. In plain words: if the legrest support tube itself is bent, you buy the whole assembly. The T93H "After 5/15/19" footrest table in the Tracer SX5 catalog says the same for its support tube: "Footrest Support Tube item #13 is not available, order item #1 as a replacement," where item 1 is 1192525 (right) or 1192526 (left).

The pivot slide tube and footplate

The lower part of a legrest, the tube that slides in and out with the footplate on it, has its own chart in the Tracer SX5 catalog, sorted by chair width, footplate style and finish. For a 16 to 22 inch chair with composite footplates in the T94HC or T94HE style, the chrome assemblies are 1110314 (right) and 1110313 (left); the black ones listed for GT94HC/T94HC are 1110312 and 1110311. Three black lines carry a footnote that says "Specify color 34P Black when ordering." The 14 inch chair has its own aluminum footplate assemblies, 1110368 and 1110367.

Footplates can also be bought alone. The same page lists a black composite footplate, 6 inches wide by 7-53/64 inches long, as 1015178, and a second one of the same size, 1192674, whose footnote E says "Use with GT94HC/GT94HCB model Front Riggings and (T94HC/GT94HCB as of 5/16/19)." It also lists aluminum footplates in small (44200X059), medium (44200X027) and extra large (44200X025 right, 44200X026 left). Its footnote D says to "Use one or more leaf springs per assembly as required such that footplate may be moved by hand to the up-right position and remain in place." The heel loops in the accessories table, "1035917-NLA Heel Loops - 1346", are marked no longer available.

Whole riggings from a store

Sellers sell complete pairs by their model codes rather than by catalog part number. ShopINVACARE lists T94HCP (elevating legrests, composite footplates, padded calf pads), T93HCP (hemi footrests, composite footplates and heel loops) and T93HEP (economy footrests); SpinLife also lists T94HEP and T94HAP, and Vitality Medical lists T94HEP. These codes match the style letters in the catalog charts, such as T94HC and T94HE, but the catalogs we read give part numbers for the parts of a rigging, not a price list for complete pairs. Which of these a person should use, swing-away or elevating, is a question for their therapist.

Which Invacare chairs a legrest fits: what the pages say

Do Invacare legrests fit every Invacare wheelchair? Not according to Invacare's own store. Mobility Atlas read the ShopINVACARE page for the T94HCP elevating legrests on 12 November 2026. It says they are recommended for Invacare Tracer and 9000 wheelchairs "(Excluding the 9000 Topaz and 9000 Jymni)", and lists the Tracer EX2, Tracer SX5, Tracer SX5 Recliner, Tracer IV, 9000 SL, 9000 XT, 9000 XT Recliner and 9000 XDT as compatible. It also says they are "NOT suitable for use with Drive Wheelchairs." The same page then says the 1.5 inch spacing between the hinge brackets lets them "easily integrate with all Invacare wheelchairs", which in our reading conflicts with its own exclusion. The Jymni catalog lists its own front riggings, J932A, J933A and J934A, not T94H. So the safe reading is the narrow list: if your model is not named, ask for written confirmation before you order.

The other pages we read describe fit more loosely, and differently from each other:

  • ShopINVACARE, T93HCP hemi footrests: "recommended for Invacare Tracer or Invacare 9000 Wheelchairs (Excluding the 9000 Topaz and 9000 Jymni)", and the page says they are "Expertly designed to fit all current Invacare standard manual model wheelchairs", naming the same eight models as the T94HCP page.
  • ShopINVACARE, all three front rigging pages: each carries the header "For use with Invacare TRSX5 Wheelchairs", while the T93HEP page's text says "Recommended for the Tracer IV or Invacare 9000 Wheelchairs".
  • SpinLife, T94HCP and T94HAP: each listing says "Made to fit" any Invacare manual wheelchair, with no exclusions.
  • SpinLife, T94HEP: "Compatible with Invacare Manual Wheelchairs".
  • Vitality Medical, T94HEP: the page says the legrests are "Designed specifically for the IVC Tracer EX2 Wheelchair".

Our own catalog row for the T94HCP pair describes it as fitting the 1.5 inch hinge spacing on Invacare Tracer and 9000-series manual chairs. In our view, the hinge spacing is a clue, not a guarantee: the number to trust is the one printed in the catalog for your model and build date. When a store page and the catalog disagree, give the seller your model and serial number and ask them to confirm the fit in writing.

None of these pages promises fit for chairs from other makers. If you have a Drive chair as well, our Drive Medical wheelchair parts guide explains Drive's own numbering.

Armrests, arm pads and clothing guards

The Tracer SX5 catalog has six arm sections: conventional adjustable height and conventional fixed height arms, each in black or color finishes, for different Tracer models. Each section lists left and right kits by length. For the Tracer SX5 with fixed height arms, for example, the desk length kit is 8881127465 (right, Style 28FB) and 8881127464 (left), and the full length kit is 8881127468 (right, Style 18FB) and 8881127466 (left).

If only the pad is worn, the same table lists 8881127510, "Kit, Arm Pad w/Screws - Desk Length", and 8881127509, the full length version; the footnote says each "Includes items 8 and 9", the pad and its screws. The pad on its own, "NLA - Arm Pad, Desk Length w/ Law Label", is marked no longer available, so in our reading the kit is the way to order it. The table also lists black plastic arm pads, 1041061 (full length) and 1041062 (desk length). SpinLife listed 8881127510 as an Invacare 10 inch desk length arm pad kit, each, at $36 and 8881127509 as a 14 inch full-length armrest pad at $44 on 12 November 2026.

Clothing guards are the plates between the arm and the wheel. In the Tracer SX5 fixed height arm table they come as 1110285 to 1110288 (desk and full length, left and right) or as kits: 1117365 (desk length, marked pair) and 1117366 (full length, "w/ Screws & Decals", as the table says). SpinLife listed 1117366 as a "Full-Length Clothing Guard Kit for Invacare Manual Wheelchairs" at $80. Its description says it is for chairs "with full-length armrests".

SpinLife also listed two arm pads from another brand, TAG, described as fitting Invacare manual wheelchairs, at $8 and at $9 (with $15 shown struck through). We name them because they appear in the same listing; they are not Invacare parts, and the Tracer SX5 manual says replacement parts "MUST match original Invacare parts". The manual's recliner section also says, for removing the Tracer SX5 Recliner's fixed height arm, to "Push down on armrest to ensure it is fully seated", and to "Make sure the armrest is securely locked before using the wheelchair."

Rear wheels, tires and handrims

Rear wheels are sorted by size, tire type and axle. The Tracer SX5 catalog's table lists 24 x 1 inch composite urethane wheels (style U2222 and its corded successor U2222C), 24 x 1-3/8 inch pneumatic wheels (2244BK), pneumatic wheels with a flat-free insert (4244BK), and 20 and 22 inch wheels. A note at the top says the 5/8 inch axle wheels "are used for fixed front frame models only." Each row gives part numbers for the whole wheel, the tire, the tube or insert, the bearing and the bearing spacer.

Two dates matter on this page. The first is 11/16/09. The footnote says "Non-Corded Tire replaced with a Corded Tire as of 11/16/09", refers you to the U2222C wheel assembly 1121043 (5/8 inch axle, fixed front frame models) or 1122726 (7/16 inch axle), or to the tire 1118209, and says that for chairs built before that date "it is recommended to order (2) each in quantity to match". Footnote B adds that corded tires "maybe more difficult to stretch over the wheel rim", so "The complete wheel assembly that has the tire and wheel rim preassembled maybe advisable." The second date is 8/11/15, when, the handrim page says, "Chrome Handrims were replaced by Alum. Clear Anodized"; it recommends ordering handrims "in pairs to match".

Wheel and handrim assemblies come as one part. The 24 inch, 5/8 inch axle assembly with a composite handrim, 1133298, appears in both the Tracer SX5 and the Tracer IV catalogs. The hardware that holds the wheel on has its own table, and its page says the hub cap kit is 1047943, and the conventional rear wheel hardware kit 1034109 (for SX5 flip back arm or removable arm chairs, per its footnote; permanent arm chairs use kit 1034106) is marked NLA, with the footnote "KIT is No Longer Availble. Must order the components separately along with 1047943." Those components are the bolt 1085454, the spacer 1022671 and the locknut 1045608.

Tires are wear items. The Tracer SX5 manual says "DO NOT overinflate the tires" and that "The recommended tire pressure is listed on the side wall of the tire." Its checklist says to "Check pneumatic tires for proper inflation" and "Inspect rear wheels for cracked, bent or broken spokes." SpinLife's rear wheel listing on 12 November 2026 held 12 items, all tires, tubes and a bearing from other brands; none was an Invacare-branded wheel. For tire sizes in general, our manual wheelchair repair guide explains how to read them.

Front casters and forks

The Tracer SX5 catalog's caster table has four columns: AT902, a dark grey composite urethane 6 x 1 inch caster; AT903, composite urethane 8 x 1-1/4 inch; 1228, composite semi-pneumatic 8 x 1-3/4 inch; and 1252, composite pneumatic 8 x 1-1/4 inch. The wheel assembly row reads 1041692, 1070811, 1058649 and 1034352, and footnote B says one of them "Consists of (2) Casters". Below that row come the tire, tube, bearing, spacer, washer, axle and locknut numbers for each style.

The 9000 catalog's caster table adds two notes worth reading before you order. One says "Effective 1/14/05, tire color changed. Due to change, it is recommended tires be ordered in pairs." The other says "#1686 and AT902 are not available for 9000XT Recliners." The Tracer IV caster table repeats the 1/14/05 color note and marks the 1228 semi-pneumatic caster as "Required for 450lb weight capacity chair".

Seller listings mix casters for many chairs. SpinLife's caster listing on 12 November 2026 had nine items, two of them Invacare: 1114142, a 4 x 1 inch semi-pneumatic caster at $26 whose listing names the A-4, Crossfire, Reveal and Spree chairs, and 1029500, a 6 inch gray urethane caster at $71 listed for "Invacare At'm" power chairs. The number 1029500 also appears in the wheel assembly row of the 9000 catalog's caster table. In our reading that shows why a part number alone is not proof of fit: one listing names a power chair, the catalog a manual chair family.

The Tracer SX5 manual's checklist says "Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop" and "Inspect casters for cracks and wear." It also says that "Every six months or as necessary, take your wheelchair to a qualified technician for a thorough inspection and servicing." That six-month interval is printed in the Tracer SX5 manual; we did not read the other models' manuals.

Wheel locks

Wheel locks on these chairs come in several styles, and the catalogs split them by style, arm type and date. For the Tracer SX5 and EX2 with flip back arms, the catalog page titled "Link-Pivot Style Wheel Locks Flip Back Arm - EX2, SX5 (After 4/14/07)" lists four complete assemblies: 1101452 (push to lock, right), 1101453 (push to lock, left), 1101454 (pull to lock, right) and 1101455 (pull to lock, left). The Tracer IV catalog's link-pivot table (After 4/14/07) and the 9000 catalog's link-pivot table for conventional arms list the same four numbers. The 9000 table adds long versions 1064760, 1064761, 1064764 and 1064765, which a footnote says are "For use on Super Low chairs only".

Some single parts are still listed: the rubber tip 47376X024, the wheel lock shoe 1102133 and the push-to-lock handles 1102134 (right) and 1102135 (left). Others are marked NLA, including the pull-to-lock handles 1031780 and 1031781 and the link 1102132. If a pull-to-lock handle breaks, in our reading the route is the whole assembly.

Wheel size changes the parts list. The Tracer IV table's footnotes say the shoe spacer kit 1067279 is required for chairs with 20 inch rear wheels and amputee attachments, or SX5 Recliners with 24 inch rear wheels, and that 1048656 is required for chairs with 20 inch rear wheels without amputee attachments, or 22 inch rear wheels with them. The Jymni catalog says that with 20 and 22 inch wheels "a wheel lock shoe spacer may also be required." The Tracer SX5 catalog prints different conditions for the same numbers: its footnotes say 1067279 is required for 22 or 24 inch rear wheels "with an amputee attachment", 1048656 is for 22 inch rear wheels without one, and the pair kit 1037421 is for 20 inch rear wheels, and that the two single kits cover "one side only". Use the footnotes in your own model's catalog, and if you change wheel size, ask for the spacer too.

Extension handles differ by catalog: the Tracer SX5 catalog lists 1058899, a 6 inch black extension, and the Tracer IV catalog 1058900, an 8 inch one. The Tracer SX5 manual warns that with push to lock wheel locks, elevating legrests and extension handles, "the wheel lock extension handles MUST be removed before swinging the elevating legrests to the side", because the legrest can knock the lock off. It also says "Wheel locks are not brakes" and that "Engaging the wheel locks may not prevent the wheelchair from moving on all floor surfaces including those that may be wet or slick." Its checklist says to "Ensure that the wheel locks prevent the wheelchair from moving when engaged."

SpinLife's wheel lock listing on 12 November 2026 held five items, none of them Invacare. The Invacare assemblies above appear in Invacare's catalogs; we found no seller price for them on the pages we read.

Seat and back upholstery

Upholstery is sold by chair width, depth or back height, material and color. The Tracer SX5 catalog's seat table has three columns, SX5 and SX5 Recliner nylon, SX5 and SX5 Recliner vinyl, and EX2/EXI vinyl, and ten rows from 14 x 16 to 22 x 18 inches. Nylon is black, and for vinyl the footnote says "Specify upholstery color when ordering". Because the extracted columns run together, we give the row, not the column: the 18 x 18 inch row reads 8881127512, 8881194395 and 1127534, and the same 8881127512 appears in the 18 x 18 inch row of the Tracer IV catalog's seat table, as its nylon upholstery.

One note covers both models. The Tracer SX5 and Tracer IV catalogs say: "After 10/11/16 additional hole was added to the rear corners of the seat upholstery and accommodates all wheelchairs manufactured before 10/12/16 as well." In our reading, the catalog means that seat upholstery made after that date is also meant for chairs built before it, and that the extra hole is expected.

Back upholstery for the Tracer SX5 runs in ten sizes, nylon from 8881127498 (14 x 16 inches) to 8881127507 (22 x 18 inches), and vinyl from 1127478 to 1127487. The catalog says each kit includes the upholstery, twelve #10-16 screws "and 12 each Washers." The Tracer IV seat table says 18 inch deep chairs "have six mounting holes" and 20 inch deep chairs "have seven mounting holes," and its seat hardware pack, 1194392, carries a note that says "Hardware is not sold individually."

Colors are listed at the front of each catalog. The Tracer SX5 catalog lists Black Nylon U240, Midnight Blue Vinyl U550, Black Vinyl U67 and Ruby Red Vinyl U86; the Tracer IV catalog lists eight colors, including Dove Grey U75 and Camel U88. The 9000 catalog says "Lightweight Vinyl upholstery is no longer available; vinyl upholstery may be used as a replacement," and that a chair ordered with a reinforced seat (RS) needs quote SM-100924021021 for a replacement. The Tracer SX5 manual says to clean upholstery with mild soap and water and "DO NOT use bleach or wash in a washing machine."

Anti-tippers and small hardware

Anti-tippers stop a chair from tipping backwards. The Tracer SX5 manual says "Anti-tippers are specific to the different seat-to-floor angles and/or seat-to-floor heights", refers to its anti-tipper charts, and says "If these requirements cannot be achieved, DO NOT use the wheelchair. Contact a qualified technician." It adds that if the seat-to-floor height is changed, the correct anti-tippers must be used "to maintain a 1 1/2 to 2-inch ground clearance". For chairs set at a 6 degree seat-to-floor angle the manual says "anti-tippers MUST be installed", and it says "Invacare strongly recommends that anti-tippers be used at all times."

Vitality Medical's page for an Invacare rear anti-tipper, model 1360, sold as a pair at $61.33 with a list price of $68.91 on 12 November 2026, describes "a universal fit, making it compatible with various wheelchair makes and models". In our reading the two statements pull in different directions, and the manual's is the one to follow: ask the seller which seat-to-floor heights the 1360 suits, and have the setting checked against the chart in your chair's manual.

Small hardware is where the catalogs are most detailed. Screws, nuts and spacers have their own numbers and sizes, such as the locknut 1045608 (7/16-20) and the screw 47203X029 (7/16-20 x 4-1/2 inches). Some only come in kits; the wheel lock hardware kit 1017677 is a pair of carriage bolts and flange nuts. The Pro site's Tracer group lists hardware items such as 47203X029 and 1047943 individually, and in our view a dealer can order them by item number once you have read the number off the catalog page for your chair.

Tracer IV parts: notes that apply only to it

The Tracer IV catalog covers chairs "After 9/30/03", and many of its pages carry a warning for a group of early chairs built with a serial number starting with 03H or 03I. For those, the catalog says to "contact an Invacare Parts Specialist for replacement parts at 1-800-333-6900 Ext. 3722." On the wheel lock pages the note says that for those chairs "replacement parts will need to be ordered thru an Invacare Parts Specialist".

The Tracer IV was sold in a 350 lb and a 450 lb version, and the parts differ. The catalog lists two wheel conversion kits, 1121459 "Kit, 350Lb Wheel Package (T4)" and 1121460 "Kit, 450Lb Wheel Package (T4)". The footnotes say the 350 lb kit contains U2222C wheels, AT903 casters "and a 350lb weight capacity decal", and the 450 lb kit 5244BK wheels, 1228 casters and a 450 lb decal. The 5244BK wheel is marked "Required for 450lb weight capacity", and the catalog notes that "Effective 3/27/06, the U2222 wheel assembly is no longer available for this model." In our view, never fit 350 lb parts to a chair labelled 450 lb; the weight decal and the serial number tell the seller which set you have.

The Tracer IV is also the only chair in this guide named in the seven openFDA recall records filed under Invacare and product code IOR that we read, described below. Our catalog lists the Tracer IV as a carbon steel chair with a 350 lb capacity and a 450 lb option, in seat widths from 18 to 24 inches, which matches the widths in the parts catalog's upholstery tables.

9000 series and 9000 Jymni parts

The 9000 catalog is the largest we read, at 281 PDF pages, because it covers four chairs and many options: arm styles for each model, back canes, a separate crossbrace section for 9000SL chairs built before 7/12/99, adjustable headtubes, offset axles, and front riggings from older series such as H903, T943A and SH904M to T93H and T94H. On its rear wheel pages for the 9000XT Recliner, footnotes date some wheels "Before 11/20/98" and others "After 11/19/98". If your 9000 chair is old, the catalog is the place to check whether its parts are still listed, and many are marked NLA.

The Pro site's Standard Wheelchairs page listed the 9000 Jymni, 9000 XT Recliner, 9000 SL, 9000 Topaz, 9000 XDT and 9000 XT on its first page on 12 November 2026, so these models are still in Invacare America's equipment catalog. The page held 71 entries in all; we read the first 12.

The 9000 Jymni, a pediatric chair, has its own catalog and its own front riggings: J932A and J933A footrests and J934A legrests in chrome and black and in -14 versions. Its rear wheel table lists 20 and 22 inch wheels and says 22 inch rear wheels "are not available" on 10 or 12 inch deep non-reclining chairs. Its frame finish table lists 13 colors, most of whose touch-up paints are marked NLA. Fitting and sizing a child's chair, and any change to it as the child grows, belong with the child's therapist.

When the catalog says NLA: what to order instead

Parts that are no longer available are marked "NLA" in the catalogs, and the footnotes often say what replaces them. The cases we read fall into four patterns, and each one changes what you order.

  • Buy the bigger assembly. On the T94H legrest after 5/15/19, the support tube and some small parts "are not available for sale", and the footnote says to order item 1, the whole assembly. On the Tracer SX5 wheel lock table the pull-to-lock handles and the link are NLA, while the complete pull-to-lock assemblies 1101454 and 1101455 are still listed.
  • Buy the parts of a kit one by one. The conventional rear wheel hardware kit 1034109 (for SX5 flip back arm or removable arm chairs; permanent arm chairs use 1034106) is NLA, and the footnote says to order the bolt, spacer and locknut "separately along with 1047943", the hub cap kit.
  • Buy the newer version. The 24 x 1 inch non-corded tire was replaced by a corded one on 11/16/09, and the footnotes point to the U2222C wheel assembly for your axle size, 1121043 (5/8 inch, fixed front frame) or 1122726 (7/16 inch) in the Tracer SX5 catalog, or to the tire 1118209. On the 9000 catalog's upholstery page, lightweight vinyl is gone and standard vinyl "may be used as a replacement".
  • Ask Invacare. For Tracer IV chairs with serial numbers starting 03H or 03I, the catalog sends you to a parts specialist at extension 3722 rather than to its tables.

Some items are simply gone. The heel loops 1035917 and many of the Jymni's touch-up paints are marked NLA with no replacement named on the pages we read. In our view, when the catalog names no substitute, ask the dealer whether Invacare has one, and only then look at another brand, knowing that the Tracer SX5 manual says replacement parts "MUST match original Invacare parts" and that its warranty excludes chairs modified with "unauthorized parts or attachments".

A worked example: a wheel lock for a Tracer SX5

Here is how the steps above fit together for one common part, using only the Tracer SX5 documents. The chair is a Tracer SX5 with flip back arms, and the left wheel lock no longer holds. The label on the right crossbrace begins 15, so the chair was made in 2015.

First, the catalog's contents page lists several wheel lock sections, and the one for this chair is "Link-Pivot Style, Flip Back Arm - EX2, SX5 (After 4/14/07)". Second, the table on that page lists a push to lock and a pull to lock version for each side. The owner looks at the working right-hand lock, sees that it is pushed forward to lock, and picks 1101453, "Wheel Lock Assembly, Push to Lock, Black - Left". Third, the table lists wheel lock shoe spacer kits, and the Tracer SX5 catalog's footnotes tie them to wheel size: 1067279 for 22 or 24 inch rear wheels with an amputee attachment, 1048656 for 22 inch rear wheels without one, and 1037421 for 20 inch rear wheels. This chair has its original 24 inch wheels and no amputee attachment, so the owner orders no spacer, and would ask about one if the wheels had been changed.

Fourth, the owner checks the manual before fitting. The Tracer SX5 manual's checklist says to "Check that the wheel locks DO NOT interfere with tires when rolling" and to "Ensure that the wheel locks prevent the wheelchair from moving when engaged." It also says to take the chair to "a qualified technician" every six months or as necessary. In our view, a worn tire or low tire pressure can also stop a good lock from holding, so the tires are worth checking before the lock is replaced.

Invacare power chair parts, briefly

The Pro site's Power Parts page lists 27 groups on 12 November 2026, from the AVIVA FX, TDX SP2, TDX SI and Storm Series to the Pronto M41, M51, M61, M91 and M94, the Formula CG powered seating systems, the MK6i electronics and the P9000 XDT. It also lists groups for the Pegasus and Comet, and a Leo scooter group marked "Canada Service Pars". The page's own total is 1,494 items.

Power chair parts follow the same rules as manual ones: the serial number on the frame, the dealer route, and the catalog for the base model. In our view they differ in one important way: motors, controllers, batteries and powered seating are jobs for a qualified technician. In our view, buy a power chair part yourself only if it is a simple item such as a caster or an arm pad, and leave the drive system to a qualified technician. Our power wheelchair repair guide covers power chair repairs in general.

What Invacare parts cost at US sellers

Invacare's catalogs and Pro site print no prices, so the table lists every Invacare-branded part line we read at three US sellers on 12 November 2026, with the label each page printed. ShopINVACARE prints "Regular price"; SpinLife and Vitality Medical print a price with no label, and where a second figure is shown struck through, we say so.

Seller (US)PartPrice as printed
ShopINVACARET94HCP elevating legrests, pairRegular price $59.00
ShopINVACARET93HCP hemi footrests, pairRegular price $45.00
ShopINVACARET93HEP economy footrests, pairRegular price $37.00
SpinLifeT94HCP elevating legrests$192
SpinLifeT94HAP elevating legrests$191
SpinLifeT94HEP elevating legrests, pair$105.70 ($117 struck)
SpinLifeT93HEP footrests, pair$69
SpinLife8881127510 desk arm pad kit$36
SpinLife8881127509 full-length arm pad$44
SpinLife1117366 clothing guard kit, pair$80
SpinLife1114142 caster 4 x 1 in$26
SpinLife1029500 caster 6 in (At'm)$71
Vitality MedicalT94HEP legrests, pack of 2$86.48 (List Price $98.27)
Vitality Medical1360 anti-tipper, pair$61.33 (List Price $68.91)

How much do Invacare wheelchair parts cost? On 12 November 2026, Mobility Atlas read 14 Invacare-branded part lines at three US sellers, and they ran from $26.00 for a 4 inch caster that SpinLife lists for other Invacare chairs to $192.00 for T94HCP elevating legrests at SpinLife. The 8 front rigging lines, footrests and legrests, ran from $37.00 to $192.00. The seller matters as much as the part. The T94HCP legrests were $59.00 a pair at ShopINVACARE and $192.00 at SpinLife, which does not state the quantity, a gap of $133.00; the T93HEP pair was $37.00 and $69.00; the T94HEP pair was $86.48 at Vitality Medical and $105.70 at SpinLife. These are prices for one listing each in the US on one day; shipping, tax and stock vary. Invacare's catalogs print no prices, and its Pro site showed none on the pages we read without signing in. Before you pay, check that the seller's page names your model, and compare at least two sellers.

Two of the prices need care. SpinLife's T94HCP line showed $192 twice, one figure styled as struck through, so we give $192 and no saving. Vitality's "You Save" line for the T94HEP read $11.79 (12%), the gap between its list price and its price. Other brands' parts sat in the same listings, such as two TAG arm pads at $8.00 and $9.00; they are excluded from the range above because they are not Invacare parts. Leaving out the two Invacare casters that SpinLife lists for other chairs, the 12 remaining lines run from $36.00 to $192.00. Arm pad kits were $36.00 and $44.00.

Prices differ by country, seller, shipping and funding. A dealer may also charge for labor, which the parts price does not include. Within the contiguous US, the Customer Service Policy shows what dealers themselves pay Invacare on top of parts: a handling fee of $45 per order through the Pro site or $65 through the Customer Success Team by phone, fax or email, and $9.95 for residential delivery. In our reading, that is one reason a dealer's quote for a single small part can be well above the part's own price.

Warranty on Invacare parts and wear items

The Customer Service Policy says "Service parts are covered under a six (6) month limited warranty unless specified otherwise." It also lists items that are "considered wear items by nature and will not be covered under the applicable product warranty, except for defects in materials or workmanship", including "all upholstery items including seats and back upholstery, arm and calf pads", cushions, "wheels, tires, and casters" and batteries.

For parts, two lines of the Tracer SX5 manual's warranty matter most (our Invacare guide quotes the full warranty). It says "This warranty does not include any labor or shipping charges incurred in replacement part installation or repair", and it does not apply to products modified "through the use of unauthorized parts or attachments". Invacare America's Customer Service Policy, written for providers, says instead that "The warranty includes freight incurred in the replacement part installation or repair of a defective product"; ask the dealer which applies to your part.

In our reading, three things follow. First, a replacement part bought new from Invacare's route carries its own warranty, six months unless specified otherwise; keep the invoice. Second, fitting a part that is not an Invacare part can be read as an unauthorized modification under the Tracer SX5 warranty. Third, a used chair has no Invacare warranty under the Tracer SX5 manual's wording, because the warranty ends with any later sale. The manual says to contact "the dealer from whom you purchased your Invacare product" for warranty service. Our Invacare guide sets out Invacare's warranty terms for other products, and our used wheelchair guide covers second-hand chairs.

Returns: what the policies say

ShopINVACARE's refund policy, read on 12 November 2026, says "Only products in full, complete, and unopened cases with original packaging can be returned." Such products "must be returned within thirty (30) days of invoice date but are subject to a 25% restocking fee." It requires an ACR return number and says "Products that have been used cannot be returned unless it is perceived to be an alleged complaint in the form of a product defect."

The Customer Service Policy, which sets the terms for dealers, says "Custom-made products (i.e. custom power chairs, builder products and parts) are not returnable for credit", and that convenience returns of unopened stock items are "subject to a 25% restocking fee". In our reading, a part that has been opened and fitted is unlikely to be returnable unless it is defective, so the time to check the part number is before you open the box.

Seller terms differ. SpinLife's T94HEP page showed a "Lifetime Limited Warranty" badge and a "Returns & Warranty" tab whose text we did not capture, so we cannot tell you its terms. Ask any seller for its return terms in writing before you order a part you are not sure of.

Medicare and replacement parts

In the US, Medicare's booklet on equipment says "If you own your equipment, the supplier who sold it to you isn't required to repair it," and that for rented equipment "Any costs for repairs or replacement parts for the rented equipment are the supplier's responsibility." A CGS FAQ for suppliers in DME MAC Jurisdiction B, headed Complex Rehab Repair FAQs and reviewed 12.08.2025, says "Wear items such as batteries and tires are eligible for replacement as a repair to a wheelchair only when they become non-functional." Our wheelchair parts guide covers Medicare and insurance for parts in detail; for a Medicare Advantage plan or Medicaid, ask the plan.

FDA recall records for Invacare manual wheelchairs

The openFDA device recall endpoint, data last updated 2026-11-07, held 7 records for the recalling firm Invacare under the product code IOR (mechanical wheelchair) when we read it on 12 November 2026, initiated between 2006-06-27 and 2012-09-10. All 7 are terminated. 1 names a chair in this guide: recall Z-0634-2014, started 2012-04-16, for Tracer IV heavy duty chairs with a 24 inch seat width and "450 lbs. weight capacity". The record says "The wheels on Tracer IV wheelchairs [...] were warped and wobbled when rolled", gives the quantity as 227 wheelchairs and lists the serial numbers affected. Its action text says the wheelchairs "were returned and destroyed".

The other six records name Küschall, Solara and Spree chairs, not the Tracer or 9000 families. A recall record is a record of an action, not a measure of how often a part fails, and the endpoint holds only what was filed under that firm name and code. The FAQ says Invacare America "no longer requests that customers register their product", and that "Should a field action or recall occur Invacare will identify the affected units and contact your Invacare dealer". In our view, that is one more reason to keep the dealer's name with the chair's serial number.

Ordering Invacare parts through Mobility Atlas

Mobility Atlas can find and quote Invacare wheelchair parts, including parts that are not listed on a shop page or are hard to find in your country. The process has three steps: you send an enquiry or part request from our Invacare wheelchair parts page; we reply with a written quote with delivery to your country; and nothing is charged before you accept the quote.

A request is easiest to answer when it carries what this guide has pointed to: the model, the full serial number, the part number and table from the catalog if you found them, the side (left or right), the size, the color code for upholstery, and photographs of the part and the label. If the catalog marks the part NLA, say so, and include the catalog's own note about what to order instead. For fitting, the chair's dealer, a service center or a qualified technician is the right person, and for any change to the chair's setup, the user's therapist.

Three traps

Trap one: buying by the model name alone. The catalogs split legrests, wheel locks and side frames by date, such as "Before 5/16/19" and "After 5/15/19". A part from the wrong table can look right in a photograph. Read the serial number first, and give it to the seller.

Trap two: trusting the widest fit statement. One ShopINVACARE page says its legrests suit "all Invacare wheelchairs" and, on the same page, excludes the 9000 Topaz and 9000 Jymni. SpinLife says "Any Invacare manual wheelchair"; Vitality names only the Tracer EX2 for T94HEP. In our view, the narrowest statement that names your model is the one to rely on, and if none names it, ask for written confirmation.

Trap three: ordering one wheel, one tire or one handrim. The Tracer catalogs say corded tires replaced non-corded ones in 2009 and anodized handrims replaced chrome in 2015, and they recommend ordering in pairs to match. The 9000 and Tracer IV caster tables say the same about tire color after 2005. In our view, one new part next to an old one may not match.

Three composite scenarios

These are composite scenarios, not individual customers. Each uses only the documents for that model.

Scenario one: a Tracer SX5 with a bent elevating legrest. The label on the right crossbrace starts 21, so the chair was built in 2021, after the May 2019 change. The Tracer SX5 catalog's "T94H Series After 5/15/19" table lists 1194381 (right) and says the support tube is not sold alone, so the whole assembly is ordered. The pivot slide tube comes from the chart for the chair's width, and for the composite footplate the catalog's footnote E points to 1192674 for T94HC riggings as of 5/16/19, so that is the number to check. Before fitting, the user checks the manual's warning about wheel lock extension handles, because the chair has push to lock wheel locks with extension handles and elevating legrests.

Scenario two: a Tracer IV, 450 lb version, with a worn caster tire. The Tracer IV catalog marks the 1228 semi-pneumatic caster as required for the 450 lb chair, and its caster table carries a note that tires changed color on 1/14/05 and should be ordered in pairs. The serial number does not start with 03H or 03I, so the standard tables apply. The family asks the seller to confirm the tire number for the 1228 caster against the serial number and to supply a pair, and keeps the invoice, since the policy treats tires and casters as wear items covered only for defects in materials or workmanship.

Scenario three: a 9000 XT owner who wants new arm pads and a seat. The 9000 catalog's upholstery page says lightweight vinyl is no longer available and vinyl may be used instead, and that a chair ordered with a reinforced seat needs a quote reference. The owner reads the seat width and depth, confirms whether the chair had the RS option, and sends the dealer the model, serial number and sizes, rather than ordering from a store listing that does not name the 9000 XT.

What to ask the dealer or seller

  • Which catalog table did you use for my chair, and for which build date?
  • Does your page or the catalog name my model, and can you confirm the fit in writing against my serial number?
  • Is the part number marked NLA, and if so, what does the catalog say to order instead?
  • Is this an Invacare part or another brand's part described as fitting Invacare chairs?
  • What does the price include: one part or a pair, hardware, shipping, fitting?
  • What warranty comes with the part, and what are your return terms once the box is opened?
  • For a power chair part: who will fit, program and test it?

If Medicare is paying rent on the chair, ask the supplier first: under Medicare's rules described above, repairs and parts for rented equipment are the supplier's responsibility.

Sources and documents

Method: every part number, date, footnote and fit statement in this guide comes from a page or PDF we saved as text on the date given, and every price from a seller's page on 12 November 2026. Ranges and differences were computed by script over every Invacare-branded price line we read, with other brands excluded. We read only the catalog pages named in each section, not each catalog in full. We did not read the Tracer IV, 9000 or Jymni user manuals, the 9000 Topaz catalog or the 9000 accessories catalog.

Prices checked November 2026: ShopINVACARE, SpinLife and Vitality Medical (US), read on 12 November 2026. Documents checked November 2026: Invacare America's Pro site, parts catalogs, FAQ and policies, ShopINVACARE's refund policy and the openFDA recall endpoint, read on 12 November 2026; the Tracer SX5 user manual, the Medicare booklet and the CGS FAQ, read on 9 November 2026.

Related guides: our Invacare guide for the company, its ownership and its chairs; our wheelchair parts guide for parts from any maker; and our manual wheelchair repair guide for repairs you can do at home.

This article is general information. Rules and prices differ by country and change, so confirm them before you buy or travel.

Common questions

Where do I find Invacare wheelchair part numbers?

In Invacare's parts catalogs. Invacare America's Pro website links a free parts PDF catalog for each manual chair family, including the Tracer EX2, EXI, SX5 and SX5 Recliner (Form 02-016), the Tracer IV (Form 03-030), the 9000SL, XT, XDT and XT Recliner (Form 95-137) and the 9000 Jymni (Form 00-104). Find your model, then the table for your chair's (or part's) build date, and copy the number with any letters after it.

Where is the serial number on an Invacare manual wheelchair?

Invacare's FAQ says it is under the seat on the crossbrace or on the frame. The Tracer SX5 manual says it is on the right crossbrace of the non-recliner and on the right frame of the recliner. The first two characters give the year of manufacture and the third the month, A for January, B for February and so on.

Can I buy Invacare parts directly?

Invacare America's FAQ says it sells through a dealer network and not directly to consumers, and its Customer Service Policy accepts orders only from authorized providers. Its web store, ShopINVACARE, does list some front riggings to the public, and online sellers list some Invacare part numbers. Mobility Atlas can also find and quote a part: send a request, and you get a written quote before anything is charged.

Do Tracer SX5 legrests fit a Tracer IV or 9000 XT?

Invacare's catalogs print the same T94H legrest support assembly numbers, 1194381 and 1194382 for chairs after 5/15/19, for the Tracer SX5, Tracer IV and 9000 series. ShopINVACARE lists the Tracer IV, 9000 XT and others as compatible with its T94HCP legrests but excludes the 9000 Topaz and Jymni. Check the date table for your chair and get the fit confirmed in writing.

How much do Invacare wheelchair parts cost?

On 12 November 2026 we read 14 Invacare part lines at three US sellers, from $26.00 to $192.00. The T94HCP legrests were $59.00 a pair at ShopINVACARE and $192.00 at SpinLife, whose listing does not state the quantity. Invacare's catalogs print no prices. Prices differ by country, seller, shipping, labor and funding, so compare at least two quotes.

Are Invacare replacement parts under warranty?

Invacare America's Customer Service Policy says service parts have a six month limited warranty unless specified otherwise, and that upholstery, arm and calf pads, wheels, tires, casters and batteries are wear items covered only for defects in materials or workmanship. Keep the invoice. The Tracer SX5 manual says the chair's own warranty excludes labor and shipping (the provider policy says freight is included; ask the dealer) and ends if the chair is sold.

Sources

  • Invacare America Pro: Service Parts catalog (read 12 November 2026)
  • Invacare America Pro: Manual Wheelchair Parts
  • Invacare America Pro: Tracer EX2/EXI/SX5/SX5 Recliner parts
  • Invacare America Pro: Power Parts
  • Invacare: Tracer EX2, EXI, SX5, SX5 Recliner parts catalog, Form No. 02-016, issued Aug 10, 2022
  • Invacare: Tracer EX2, EXI, SX5, SX5 Recliner parts catalog 02-016, wheel lock pages 83 and 84 (footnotes, read 12 November 2026)
  • Invacare: Tracer IV parts catalog, Form No. 03-030, issued Mar 22, 2022
  • Invacare: 9000SL, 9000XT, 9000XDT, 9000XT Recliner parts catalog, Form No. 95-137, issued Jul 26, 2022
  • Invacare: 9000 Jymni parts catalog, Form No. 00-104, issued Aug 30, 2022
  • Invacare: Tracer SX5 user manual, Part No. 1110550 (read 9 November 2026)
  • Invacare America: FAQ
  • Invacare America: Customer Service Policy, effective January 10, 2024
  • Invacare America: Service Repair Policy page
  • Invacare America Pro: Standard Wheelchairs
  • Invacare America: home page
  • Invacare: MIGA Holdings acquires Invacare's North American business, November 11, 2024
  • ShopINVACARE: T94HCP elevating legrests
  • ShopINVACARE: T93HCP hemi footrests
  • ShopINVACARE: T93HEP economy footrests
  • ShopINVACARE: search "wheelchair parts" (page saved by fact-check, read 12 November 2026)
  • ShopINVACARE: refund policy
  • SpinLife: T94HEP elevating legrests for Invacare manual wheelchairs (US seller)
  • SpinLife: manual wheelchair armrests (US seller)
  • SpinLife: footrest assemblies (US seller)
  • SpinLife: caster wheel assemblies (US seller)
  • SpinLife: rear wheel assemblies (US seller)
  • SpinLife: wheel locks (US seller)
  • Vitality Medical: Invacare economy hemi elevating legrests T94HEP (US seller)
  • Vitality Medical: Invacare adjustable rear anti-tipper 1360 (US seller)
  • openFDA: device recalls, recalling firm Invacare, product code IOR (data last updated 2026-11-07)
  • Medicare: Medicare Coverage of Durable Medical Equipment and Other Devices (booklet 11045, read 9 November 2026)
  • CGS (DME MAC Jurisdiction B): Complex Rehab Repair FAQs (read 9 November 2026)

Read on . The wording of the article is our own.

Products from this article

Related guides

All articles

Resources for AI agents

Ask AI about us

See what your favorite assistant says about Mobility Atlas.