R8 or 1/2" Wheelchair Blind Bearing Puller/Extractor
Bearing tools. A single-size puller for drawing R8 (1/2 inch bore) bearings out of wheelchair rear hubs and forks.
US$23

Wheelchair Bearings · Bearing tools · AC-194
In Brass and Aluminium Pin Punch
A punch is the simple way to remove a bearing: reach through the hub from the far side and tap the bearing out. This one is 5/16 inch in diameter and made from brass and aluminium, metals softer than a steel screwdriver, so slips are less likely to gouge the hub. The seller lists it for 8 mm, R6 and R8 bearings in rear hubs, front forks and caster wheels.
You can order the Wheelchair Bearings 5/16 Brass and Aluminium Pin Punch through Mobility Atlas with delivery to Australia, New Zealand, the Gulf, Southeast Asia, Israel, Latin America, the United States and most other countries. Send an enquiry with your country, and Anna replies within 24 hours with a written quote. Our price is US$19 before delivery.
Suits wheelchair users and technicians who want a low-cost way to knock out worn bearings. It needs a hammer and a firm support under the wheel, and it is for removal only.
As printed by the maker or the seller on 13 November 2026. Send us the number from your old part or its label and we match it before we buy.
| Type | Pin punch |
|---|---|
| Diameter | 5/16 in |
| Material | Brass and aluminium |
| Bearing sizes | 8 mm, R6 (3/8 in), R8 (1/2 in) |
| Where used | Rear hubs, front forks, casters |
| Brand country | USA |
| Brand | Wheelchair Bearings |
| Category | Tools and maintenance, Bearing tools |
| Catalog ID | AC-194 |
Compared with the source page; product details last checked on 13 November 2026. Details can change, so we confirm them in your quote.
It passes through the hub and rests on the inner edge of the far bearing, which is then tapped out with a hammer.
They are softer than steel tools, which lowers the risk of damage if the punch slips.
The seller lists 8 mm, R6 or 3/8 inch, and R8 or 1/2 inch bearings.
Yes. Mobility Atlas delivers it to Australia, New Zealand, the Gulf, Southeast Asia, Israel, Latin America, the United States and most other countries; our price is US$19 before delivery, and Anna sends a written quote with delivery to your country within 24 hours. As a rough guide, items in stock at a US or European supplier usually arrive in one to three weeks. Delivery for an item like this starts at about US$45; the Ordering section on this page has the details on cost, payment and cancellation.
PulsCar, LLC, the US company that runs Mobility Atlas, buys it from the maker or a dealer and resells it to you. Anna, the founder, handles every order herself. Mobility Atlas is an independent buying service, not an official Wheelchair Bearings dealer.
Yes, with a full refund, until the product has been bought for you. Payment is taken only after you accept the written quote.
Press Add to enquiry, add any other products or parts, and send the list with your country, sizes and options. We do not ask for payment details.
We check availability with the maker or a dealer and send you a price with delivery to your country.
If you accept the written quote, we buy the product and arrange delivery to you. Nothing is charged before that.
Mobility Atlas is an independent buying service. We are not an official dealer of Wheelchair Bearings. How ordering works · Delivery, payment and returns
Bearing tools. A single-size puller for drawing R8 (1/2 inch bore) bearings out of wheelchair rear hubs and forks.
US$23
Bearing tools. A single-size puller for 608 bearings with an 8 mm bore, the size found in many wheelchair front caster wheels.
US$23
Bearing tools. A press tool for removing and fitting R8 (1/2 inch bore) bearings in wheelchair rear hubs and forks.
US$35
Out of stock at source
Bearing tools. Three tools that pull out a bearing outer race left stuck in a caster, fork, fork mount or rear hub after a bearing has come apart.
US$58
Bearing tools. A hard maple block with a rubber top that supports a caster, wheel or fork while bearings are driven out or pressed in.
US$38
Bearings, caster wheels and bearing tools whose source pages state the R6, R8 bearing size. Check the size on your old bearing or axle before ordering.
Caster forks. A pair of single-arm caster forks with R8 bearings, three axle positions and mono axles for 8 mm casters.
US$173
Wheel bearings. A four-pack of R8 bearings with rubber seals for rear wheels and forks on chairs with a 1/2 in axle.
US$29
Wheel bearings. A four-pack of stainless steel SR8 bearings for shower wheelchairs with a 1/2 in axle.
US$29
Wheel bearings. A pair of ceramic hybrid R8 deep-groove bearings for 1/2 in axle wheelchair wheels.
US$95
Caster bearings. A four-pack of R6 caster bearings with rubber seals for front casters on a 3/8 in axle.
US$26