Jazzy Select parts and Jazzy 600 parts: batteries, wheels, motors, joysticks and part numbers for the Select, Select 6, Select Elite, Select GT, 600 and 600 ES
Parts for the Jazzy Select family and the Jazzy 600 and 600 ES, model by model from Pride's manuals and sheets, with serial ranges, US seller prices, warranty and recalls.
Contents
- The short answer
- How we compared, and our interest
- Which Jazzy Select or Jazzy 600 do you have?
- The models side by side
- Jazzy Select batteries: size, weight and amp-hours
- Jazzy 600 and 600 ES batteries: NF-22 on Pride's sheets, 22NF on seller pages
- Chargers: what the manuals allow
- Changing the batteries: the steps the manuals print, and who should do it
- Drive wheels and tires
- Casters and anti-tip wheels
- Motors, brakes and the freewheel levers
- Joysticks and controllers: GC, GC3, VR2, VSI, Shark and LiNX
- Seats, armrests, covers and small parts
- Serial-number-specific parts: three seller pages that say so
- What the manuals address to the reader, and what they leave to the provider
- What sellers charged: Monster Scooter Parts and SpinLife
- Warranty, document by document
- Recalls: the Jazzy Select and Select 6 harness records
- Medicare, funders and parts for these chairs
- Pride's own figures on parts shipping
- Ordering Jazzy Select and Jazzy 600 parts through Mobility Atlas
- Three traps
- Three composite scenarios
- Questions to ask before you order
- Sources and documents
- Common questions
- Sources
The short answer
Jazzy Select parts and Jazzy 600 parts are still easy to find, but they are not interchangeable across the family. Pride's own documents print U-1 batteries for the Jazzy Select, Select 6, Select 6 2.0, Select Elite and Select GT, and NF-22 batteries for the Jazzy 600 Series and the Jazzy 600 ES. The drive wheels range from 9 inches (Select Elite) to 14 inches (Jazzy 600), and the 600 ES manual fastens its drive wheel with five lug nuts while the Select manuals we read describe one drive wheel nut, a washer and an axle key. Several seller pages tie a part to a serial-number range rather than to the model name. This guide gives the part facts model by model, as Pride's manuals and specification sheets print them, with seller prices and the warranty and recall records for these chairs.
Mobility Atlas earns a fee or margin when you order through us; the guide below uses only published documents (Pride's manuals, specification sheets, warranty texts and statements, two US sellers' pages, openFDA and Medicare) read on the dates given. Our buying page for these parts is Pride Mobility parts for Jazzy and Go Go chairs. Mobility Atlas can find and quote Jazzy Select and Jazzy 600 parts, including parts that are not listed in our catalog: you send an enquiry or a part request naming the chair, its serial number if you have it, and the part; we reply with a written quote that includes delivery to your country, and nothing is charged before you accept it.
If you own a newer Jazzy (EVO 614, EVO 613, Elite HD, Elite 14 or 1450) or a Pride scooter, our broader Pride and Jazzy parts guide covers those chairs, the serial label and how Pride part numbers read on seller pages. This page goes deeper on the older Select family and the 600 line only.
How we compared, and our interest
On 19 November 2026 we read, in a browser, Pride's Resource Files page and six owner's manuals from it: the Jazzy Select Series manual (INFMANU3351, Rev J, November 2022, which covers the Jazzy Select, Select 6 and Select 6 with Power Seat), the Jazzy Select 6 2.0 manual (INFMANU4932, Rev A, August 2018), the Jazzy Select Elite manual (INFMANU3973, Rev B, July 2010), the Jazzy Select GT manual (INFMANU3807, Rev B, September 2009), the Jazzy 600 Series manual (INFMANU2828, Rev H, August 2011) and the Jazzy 600 ES manual (INFMANU4480, Rev D, May 2020). We also read five Pride specification sheets (Select Series, Select 6 2.0, Select Elite, Jazzy 600 Series, Jazzy 600 ES) and two one-page Pride statements on parts support and repair. The older PDFs have a text layer that splits some words; we quote only lines that read cleanly and say where a line was cut.
For prices we read, on the same day, three Monster Scooter Parts search results pages (the first two pages for "jazzy select" and the first page for "jazzy 600", 48 product tiles) and a search for DRVASMB1869 (2 tiles), six of its product pages, and two SpinLife searches. We also reused documents read earlier: Pride's Jazzy 600 ES product page and Pride's standard power warranty insert INFINFB2782 (read from the EVO 614, Ultra Light and Air 2 pages), both 9 November 2026, Medicare's booklet on durable medical equipment (9 November 2026), and a Monster Scooter Parts joystick search and its CTL1906943 LiNX joystick product page (12 November 2026). Recall data come from openFDA, read on 19 November 2026.
We did not inspect any chair or fit any part; fitment is only what a Pride document or seller page prints, and where two documents disagree we give both. The clinical side, such as seat size, seating changes or whether a different chair would suit you better, belongs to your clinician, such as a physical therapist or seating specialist; this guide stops at the parts.
Which Jazzy Select or Jazzy 600 do you have?
Pride uses the Select name for several different chairs. Its Resource Files page lists separate owner's manuals for the "Jazzy Select Series", "Jazzy Select 6 2.0", "Jazzy Select 7", "Jazzy Select 14 Series", "Jazzy Select Elite", "Jazzy Select Elite 2", "Jazzy Select GT", "Jazzy Select HD" and "Jazzy Select Traveller". The Select Series manual cover reads "Including Models: Jazzy Select, Jazzy Select 6, and Jazzy Select 6 with Power Seat"
. The same page lists a "Jazzy 600 Series" manual, whose back page names the "Jazzy 600 2S, Jazzy 600 2SP, Jazzy 600 3S, Jazzy 600 3SP, and Jazzy 600XL"
, and a separate "Jazzy 600 ES" manual.
The name "Select 6 Ultra" appears on seller pages (for example a Monster Scooter Parts battery tile titled "12 Volt U1 Battery for the Jazzy Select 6 Ultra"), but Pride's Resource Files page, as we read it, lists no manual under that name. In our reading, a seller title is not proof of which Pride document covers a chair; if your chair says Select 6 Ultra, read the label and ask the seller which Pride manual and part numbers they used.
This guide covers the six manuals named above and the chairs they cover. The Select 7, Select 14, Select HD, Select Traveller and Select Elite 2 have their own manuals, which we did not read; where a seller tile names one of them, we say so and do not carry the fact over.
The model name alone is often not enough. Three of the six Monster Scooter Parts product pages we read say the part is "serial number specific", and two of them print serial ranges for the Jazzy Select (see the section on serial-number-specific parts below). Pride's serial label and its format are explained in our Pride and Jazzy parts guide; in our view, photograph the label before you order anything.
The models side by side
The table puts the part-related lines of Pride's specification sheets next to each other. "Sheet" means the separate specification sheet; for the Select GT we used the specifications appendix in its manual, because we did not find a separate GT sheet on the Resource Files page.
| Model (document) | Batteries | Charger | Drive wheels | Casters / anti-tips |
|---|---|---|---|---|
| Select (INFINFB3151) | Two 12 V U-1, 25.25 lbs each | 3.5 amp | 10 in., solid | Rear 5.75 in.; front anti-tip 5 in. |
| Select 6, 6 with Power Seat (INFINFB3151) | Two 12 V U-1, 25.25 lbs each | 3.5 amp | 10 in., solid | Front and rear 5.75 in. |
| Select 6 2.0 (INFINFB3955) | Two 12 V U-1, 25.5 lbs each | 3.5 amp | 10 in., flat free | 6 in., flat free |
| Select Elite (INFINFB2713) | Two 12 V U-1, 24.5 lbs each | 3-amp | 9 in., solid | Rear 6 in.; front anti-tip 3 in. |
| Select GT (manual appendix) | Two 12 V U-1, 24.5 lbs each | 3-amp | 10 in., solid | Rear 6 in.; front anti-tip 5 in. |
| Jazzy 600, 600 XL (INFINFB2754) | Two 12 V NF-22, 35 lbs each | 5-amp | 14 in.; 600 XL solid | Front 5 in.; rear 6 in. |
| Jazzy 600 ES (INFINFB3155) | Two 12 V NF-22, 37.2 lbs each | 5 amp | 13.25 in., solid (product page: 14 in. foam filled) | Front and rear 5.75 in. (product page: 6 in. solid) |
Every sheet in the table lists two 12-volt batteries and an off-board charger. The drivetrains differ: the Select Elite sheet prints "Two motor, front-wheel drive"
, the Select GT appendix "Two motor, Mid-wheel drive"
, the Select Series sheet "Two motor, Mid-Wheel drive"
for the Select and "Mid-Wheel 6 drive" for the Select 6, and the 600 ES sheet "Two motor, Mid-wheel 6 drive"
. All six of these Pride documents print the same brake line: "Intelligent Braking" electronic regenerative, disc park brake.
Weight capacity is 300 lbs on every sheet except one line. The Jazzy 600 Series sheet prints "Jazzy 600XL: 450lbs. (181 kg)"
. The two figures do not match: in our arithmetic 450 lbs is about 204.1 kg, and 181 kg is about 399.0 lbs. In our view, plan on the lower figure for a 600 XL until Pride or your provider confirms the rating in writing.
Jazzy Select batteries: size, weight and amp-hours
Pride's documents give the Jazzy Select family one battery size. The Select Series sheet prints "Two 12-volt, sealed lead-acid, non-spillable deep-cycle U-1 batteries"
for the Select, Select 6 and Select 6 with Power Seat, and the Select 6 2.0 sheet prints the same line. The Select Elite sheet and the Select GT appendix print "Two 12-volt, U-1 batteries"
. The battery weight differs by document: 25.25 lbs each on the Select Series sheet, 25.5 lbs on the Select 6 2.0 sheet, and 24.5 lbs on the Select Elite sheet and in the Select GT appendix. Each sheet adds "Battery weight may vary based on manufacturer."
Which batteries does a Jazzy Select take? Mobility Atlas read Pride's specification sheets for the Select Series, Select 6 2.0 and Select Elite and the specifications appendix of the Select GT manual on 19 November 2026: each prints two 12-volt U-1 batteries and an off-board charger (3.5 amp for the Select Series and Select 6 2.0, 3-amp for the Select Elite and Select GT). None of these Pride texts, as we could extract them, prints an amp-hour figure for the battery; they print the size. The newer sheets say "AGM, Gel-Cell, or Hybrid Gel"
type is required, and the Select Elite sheet "AGM or Gel-Cell type required"
. The Select Series manual says to use two batteries "of the exact same type, chemistry, and amp-hour (Ah) capacity"
, and all six manuals say to replace both at the same time. A US seller listed its U1 replacement as 35 Ah AGM or 32 Ah gel, from $79.99 each.
That seller is Monster Scooter Parts. Its BATLIQ1017 page, read on 19 November 2026, prints "Pride Mobility: BATLIQ1017"
and "Universal Power Group (UPG): UB12350 (AGM), D5870 (Gel)"
, and offers four options in its product data: AGM (35 Ah) one battery $79.99 or two $159.98, and Gel (32 Ah) one $119.99 or two $239.99. The gel pair cost $80.01 more than the AGM pair in our subtraction, and the AGM option prints 3 Ah more. The page says the gel type needs "a gel-compatible charger" and a break-in of "about 15 to 20 charge cycles"
. The page also says "This item is not returnable"
and "This item has a 1 year warranty."
The BATLIQ1017 number appears on 4 battery tiles in the search pages we read (Select, Select Elite, Select 6 and Select 6 2.0, Select GT); 3 more U1 tiles, titled for the Select 6 Ultra, Select 7 and Select Traveller, print no part number. All 7 print "From" $79.99. In our reading the seller sells one U1 battery under several titles; we read the product page for the Jazzy Select title only.
Pride's manuals warn about mixing. The Select Series manual says, under a prohibited sign, "Always use two batteries of the exact same type, chemistry, and amp-hour (Ah) capacity."
It also says, in its battery replacement section, "Do not mix old and new batteries. Always replace both batteries at the same time."
All six manuals we read print that second line. In our view, this rules out buying one AGM battery to pair with an old gel battery, or one 35 Ah battery with a 32 Ah one.
Battery chemistry, charging habits, range loss and storage are covered in our power wheelchair batteries guide; we do not repeat them here.
Jazzy 600 and 600 ES batteries: NF-22 on Pride's sheets, 22NF on seller pages
The Jazzy 600 Series sheet (INFINFB2754, Rev 50A, August 2011) prints "Two 12-volt, deep cycle NF-22 batteries"
at 35 lbs each and a "5-amp, off-board" charger. The 600 ES sheet (INFINFB3155, Rev B, May 2020) prints "Two 12-volt, sealed lead-acid, non-spillable deep-cycle NF-22 batteries"
at 37.2 lbs each and a "5 amp, off-board" charger. Pride's 600 ES product page, read on 9 November 2026, prints "NF-22 at 37 lbs. each". The two Pride figures differ by 0.2 lb; in our view, plan on the heavier figure when you arrange help to lift a battery, because the 600 ES manual says "Power chair batteries are heavy."
Monster Scooter Parts sells a pack titled "BATLIQ1018 - 24 Volt 22NF (55 Ah) Battery Pack for the Jazzy 600"
at $349.98. Its page says the pack is a "Set of two 12 volt 55 Ah 22NF AGM batteries (24 volt system)"
, "Matches Pride part number BATLIQ1018"
, and lists UPG UB12550 (AGM). The same price and number appear on 5 tiles in our three search pages, titled for the Jazzy 600, Jazzy 600 XL, Select HD, Select 14 and Select 14 XL. We found no BATLIQ1018 tile titled for the Jazzy 600 ES in the pages we loaded; the seller's page names only the Jazzy 600 as the compatible model.
In our reading, "NF-22" on Pride's sheets and "22NF" in the seller title name the same group size written two ways, but neither page says so; and the sheet prints no amp-hours. In our view, if you own a 600 ES, ask the seller in writing whether the pack fits your serial number and battery tray before you order, and compare the label on your old batteries.
For the 600 ES the manual adds a mounting detail: "Batteries must sit flat within the battery well frame with the battery terminals facing inward toward each other."
The Select Series manual says the same in its care section. The battery wiring diagram is on a decal on the power base (600 ES, Select Series) or "on the front battery tray"
(Jazzy 600 Series manual).
Chargers: what the manuals allow
The battery pages we copied from the Select Series, Jazzy 600 Series and 600 ES manuals tell you to charge with the charger supplied with the chair. The Select Series and 600 ES manuals say, as a warning, "You must recharge your power chair's batteries with the supplied off-board battery charger. Do not use an automotive-type battery charger."
They also warn that "Explosive gases may be generated while charging the batteries"
and to keep the chair and charger "away from sources of ignition such as flames or sparks and provide adequate ventilation when charging the batteries."
On the charger case, the 600 ES manual warns: "Be aware that the battery charger case may become hot during charging. Avoid skin contact and do not place on surfaces that may be affected by heat."
For a damaged charger, the manuals give the action: "Inspect the battery charger, wiring, and connectors for damage before each use. Contact your authorized Pride Provider if damage is found."
And: "Do not attempt to open the battery charger case. If the battery charger does not appear to be working correctly, contact your authorized Pride Provider."
The 600 ES manual adds a time limit: if the charger LED "does not indicate that charging is complete within 24 hours, unplug the charger and contact your authorized Pride Provider."
On replacement chargers, the Monster Scooter Parts "jazzy 600" page lists a tile titled "ELEASMB6293 / ELECHG1025 - 24 Volt 5.0 Amp XLR EA1148D 24BC5000T-4 AGM/Gel Battery Charger for Jazzy 600 ES, Elite 14, Elite HD, & J6 Power Chairs (CPC)"
at $89.99. That matches the 5 amp rating on the 600 ES sheet; we did not open its product page. The Select chairs are rated 3 or 3.5 amp on Pride's documents. In our view, match the amp rating on your chair's sheet and the plug, and ask your provider before you change the charger type. Our power wheelchair charger guide covers chargers in general.
Changing the batteries: the steps the manuals print, and who should do it
All six manuals print a battery replacement procedure, and all six put the same warning in front of it: "The batteries in your power chair should only be serviced or replaced by an authorized Pride Provider or a qualified technician."
The safety guidelines page at the front of each manual carries a broader line: "An authorized Pride Provider or a qualified technician must perform the initial setup of this power chair and must perform all of the procedures in this manual."
In our reading, the steps are printed so that a provider or technician can follow them, not as a task the manual hands to the owner.
The steps differ by chair. The Select Series manual lists 18 steps, from removing the rear shroud and side cover to sliding the batteries out one after the other, with the front battery's terminals "facing the front of the power base"
. On the Select 6 2.0, both batteries slide out after the tie-down straps are loosened, and the terminals face "the sides of the power base"
. On the Select Elite, you remove the seat and the main shroud, disconnect the cables, then "loosen the yellow thumbscrews and slide the battery tray back"
, with a warning that the cables "must be disconnected from the battery terminals before sliding the battery tray back or cable damage could result."
On the Jazzy 600 Series, the front cover comes off with a retaining pin and the batteries are held with hook and loop straps. On the 600 ES, the front cover comes off by "squeezing the release handles"
and the batteries use quick release connectors.
Five of the six battery pages print the same safety lines; the Select GT battery page we copied does not print the tools line. The Select Series manual says: "Do not replace batteries when seat is occupied."
It warns: "Power chair batteries are heavy. See specifications table. If you are unable to lift that much weight, be sure to get help. Use proper lifting techniques and avoid lifting beyond your capacity."
Under a prohibited sign: "Keep tools and other metal objects away from the battery terminals. Contact with tools can cause electrical shock."
Under a mandatory sign: "Battery posts, terminals, and related accessories contain lead and lead compounds. Wear goggles and gloves when handling batteries and wash hands after handling."
And after reconnecting: "Make sure you tighten the fasteners so that the connections are secure."
By our arithmetic from the sheets, a pair of Select Series batteries weighs 50.5 lbs, a Select Elite pair 49.0 lbs, a Jazzy 600 pair 70 lbs and a 600 ES pair 74.4 lbs. The Select Series, Select 6 2.0, Select Elite and Jazzy 600 Series manuals list tools: a "metric/standard socket set and ratchet"
and an "adjustable wrench".
Drive wheels and tires
The drive wheel is where the Select family and the 600 line part ways most clearly. Pride's sheets and the GT manual's appendix print 10-inch solid drive wheels for the Select, Select 6 and Select GT, 10-inch "Flat free" for the Select 6 2.0, 9-inch solid for the Select Elite, 14-inch for the Jazzy 600 ("pneumatic or solid available"
) and 600 XL (solid), and 13.25-inch solid for the 600 ES.
How the wheel comes off, by manual
The Select Series manual says: "If you have pneumatic tires and you have a flat tire, replace the tube. If your chair is equipped with a solid tire insert, then you must replace the whole wheel assembly."
Its steps: turn off the controller, make sure the chair is in drive mode, raise and support the power base "so that the wheel is at least 1 in. (2.5 cm) off of the ground"
, remove the hub cap if equipped, remove "the drive wheel nut and washer from the axle"
, and pull the wheel off, keeping the key. The Select 6 2.0 manual prints the same steps. The Jazzy 600 Series manual starts with "Set the power chair up on blocks"
and separates the rim halves by removing screws.
The axle key matters. The Select Series manual warns: "Ensure that the axle key is properly installed into the axle slot when mounting the wheel. If not installed securely, the braking and drive systems are disengaged which may cause personal injury or product damage."
The Select Elite, Select GT and Jazzy 600 Series manuals word it as "Failure to ensure that the axle key is properly installed into the axle slot when mounting the wheel can result in electronic brake failure, personal injury, and/or product damage."
Each adds: "Make sure both the nut and washer are reinstalled and tightened properly."
(The Select Elite and Select GT manuals print "the nut and the washer".)
The 600 ES is different. Its manual says the chair "is equipped with run flat tires. If a tire becomes damaged, you must replace the whole wheel assembly."
Its steps remove "the five (5) lug nuts from the wheel hub"
and "Replace the entire assembly."
Its warning: "When changing a pneumatic tire, remove only the five lug nuts, then remove the wheel. If any further disassembly is required, deflate the tire completely or it may explode."
The four Select and 600 manuals whose wheel warnings we copied (Select Series, Select 6 2.0, Select Elite, Jazzy 600 Series) say instead: "When changing a tire, remove only the center lug nut and washer, then remove the wheel. If any further disassembly is required, deflate the tire completely or it may explode."
Every manual we read carries the line "The wheels on your power chair should only be serviced or replaced by an authorized Pride Provider or a qualified technician."
Five manuals (all but the Jazzy 600 Series, which words it "the controller's power is turned off"
) also warn: "Be sure that the power to the controller is turned off and the power chair is not in freewheel mode before performing this procedure."
Wheels and tires on seller pages
| Seller and title (as printed, shortened) | Price, 19 Nov 2026 |
|---|---|
| MSP: WHLASMB2045, 3.00-4 flat-free drive wheel, Jazzy Air, Select, Select 6 | $96.41 |
| MSP: WHLASMB2017, 9 x 3 in. (2.80/2.50-4) flat-free drive wheel, Select Elite, TSS 300 | $98.89 |
| MSP: WHLASMB2187, 14 x 3 in. (3.00-8) flat-free drive wheel, Select HD | $312.10 |
| MSP: TIRSOLI1081, 14 x 3 in. (3.00-8) foam-filled tire, Jazzy 600 and 614 | $128.73 |
| SpinLife: 10 in. gray flat-free drive wheel assembly, Jazzy Select (no item number on tile) | $157 |
| SpinLife: 10 in. black flat-free drive wheel assembly, Jazzy Select (no item number on tile) | $84 |
| SpinLife: 9 x 3 in. flat-free drive wheel assembly, Jazzy Select Elite (no item number on tile) | $99 |
MSP is Monster Scooter Parts. The titles are shortened; the seller writes the sizes with inch marks. The 14 x 3 in. tire is titled for the Jazzy 600 and 614; Pride's 600 ES documents differ: the May 2020 sheet prints a 13.25-inch solid drive wheel, while Pride's 600 ES product page, read 9 November 2026, prints 14-inch "foam filled" drive wheels; in our view, give both to the seller. No tile we read names the 600 ES for a drive wheel or tire. In our view, read the size molded on your old tire and compare it with the seller's size before you order. The two SpinLife 10-inch Select wheels differ by color and by price on the tiles; neither tile prints a part number. Tire care in general is in our wheelchair tire replacement guide.
Casters and anti-tip wheels
Pride's sheets print the caster sizes in the models table above: 5.75 inches on the Select, Select 6 and 600 ES, 6 inches on the Select 6 2.0, Select Elite and Select GT, and 5 inches front and 6 inches rear on the Jazzy 600. The Select has front anti-tip wheels (5 inches, "Jazzy Select only" on the Select Series sheet), the Select Elite 3-inch front anti-tips, and the Select GT 5-inch front anti-tips. The Select 6 and Select 6 2.0 have casters at both ends instead; the Select Series manual says the Select 6 and Select 6 with Power Seat are "also equipped with four caster wheels"
.
The monthly checks in all six manuals include "Check the caster wheels for wear. Replace them as necessary."
and "Check the caster forks for damage or fluttering which indicates that they may need to be adjusted or have the bearings replaced. See your authorized Pride Provider for repair."
In our reading, the first line does not say who replaces the caster, and the front-page line hands all procedures in the manual to a provider or qualified technician.
For the 600 ES, Pride's sheet and product page differ. Monster Scooter Parts lists WHLASMB2131, a "Low Impact Caster Wheel Assembly with Black Tire for the Jazzy 600 ES"
whose title gives the size as 6 x 2 in., at $41.63, while the 600 ES sheet prints 5.75-inch casters. Pride's 600 ES product page, read 9 November 2026, prints 6-inch "solid OMNI-Casters" front and rear, so Pride's two documents differ as well. For the Select, seller sizes do not always match Pride's sheet: Monster Scooter Parts lists a WHLASMB2047 rear caster wheel assembly for the Jazzy Select, Select Elite and Pride TSS 300 at $31.84 (struck price $53.60) and an all-black 6 x 2 in. rear caster for the same three chairs at $54.30, while the Select Series sheet prints 5.75 inches for the Select and the Select Elite sheet 6 inches. The two figures may describe the same wheel measured differently, but neither page says so; in our view, measure the old caster and give the seller the Pride number on it.
Other caster and anti-tip tiles on the pages we read: "WHLASMB1613 - Front Anti-Tip Wheel for Jazzy 1107, Select, & Select GT Power Chairs"
at $32.51; a 5 x 1.75 in. flat-free front caster for Jazzy 600 chairs at $40.06; a caster fork assembly for the Jazzy Select "From $35.00" and a caster wheel cover for the Jazzy 600, 600XL, 610 and Quantum 6000Z at $25.29. SpinLife lists a 5 in. flat-free caster wheel assembly for the Jazzy 600 at $83, with no item number on the tile. Caster replacement in general is in our caster replacement guide.
Two more tiles on the Select search page are worth knowing about because their titles look like wheels: "FRMASMB15897 - Left Black Rim and Tire Active-Track Anti-Tip Assembly with Motors, GC3 Connector for the Jazzy Select"
and its right-hand twin FRMASMB15898, each at $582.30 with a struck $707.36. In our reading the titles describe larger assemblies, not a wheel; we did not open their pages.
Motors, brakes and the freewheel levers
The Select Series manual says the power base "includes two motor/brake assemblies, two drive wheels, two batteries, and wiring harnesses."
Pride's sheets name the brake system, not the motor maker. For a Select or Select GT motor, Monster Scooter Parts lists "DRVASMB1869 / DRVASMB1870 - Drive Motor Assembly (CM808-075A/CM808-075B) for the Jazzy Select & Select GT"
at $449.44 for either side. The product page prints "CCL Motor: CM80B-005A, CM80B-005B"
and "Warner Brake: WR225A36P1, WR225A36P2"
; the title and the detail line print different motor numbers, and we give both as printed. It says the assembly includes "the mounting brackets, shaft key, and all of the needed bolts and washers."
The same page limits fit: "These motors are serial number specific. They only fit Select power chairs with serial numbers from J8304406001C30 through J8305810031JD0."
A left and a right motor at the page price come to $898.88 in our arithmetic. A second tile on the DRVASMB1869 search is a "Left Side Motor & Brake Assembly for the Jazzy Select and Select GT (Used)"
at $116.99; we did not open it. The page says "This item is not returnable"
and "This item has a 30 day warranty."
For the Select Elite, our Pride and Jazzy parts guide describes a seller tile that sells DRVASMB7110011 as a "Left Gearbox Assembly for the Jazzy Select Elite"
while a drive motor page for the Elite 14 and Elite HD gives the same number as its left motor. For the 600 ES, the only drive part on the pages we read is "ELE130055 - Shark G4 Electronics Assembly with Sub Song Motors for the Jazzy 600 ES"
at $892.86, with a struck $1,084.62; its page says "Several similar electronics assemblies are listed with different part numbers"
and asks you to match the number on your old part.
The brake check
Every manual we read prints a weekly brake check, to be done "on a level surface with at least 3 feet (1 meter) of clearance around your power chair"
: turn on the controller and turn down the speed, check that the battery condition meter stays on, then "Slowly push the joystick forward until you hear the electric brakes click. Immediately release the joystick. You must be able to hear each electrical brake operating within a few seconds of joystick movement."
The GT, Elite and Jazzy 600 Series manuals then say to repeat the test "three times, pushing the joystick backward, then left, and then right."
The Select Series and 600 ES manuals list "Motor noise", "Jerky motion" and "Pulling to one side" among the symptoms that "could indicate a serious problem with your power chair"
. Motors in general are in our wheelchair motor guide.
Freewheel levers
Every manual we read describes "a manual freewheel lever on each motor"
. Five manuals print an upward pull to engage drive: the Select Series, Select 6 2.0 and Select GT manuals say "Pull both levers upward to engage the drive motors (drive mode)"
, the 600 ES manual "Pull both levers up", and the Jazzy 600 Series manual "Pull the two levers upward to engage the drive motors (drive mode)"
; the 600 Series places the lever "on top of each motor". The Select Elite manual is the odd one: "Push both levers forward away from the seat post to engage the drive motors (drive mode)"
and "Pull both levers rearward toward the seat post to disengage the drive motors (freewheel mode)."
The warnings are the same in substance. The Select Series manual warns you not to use the chair while the drive motors are disengaged and, printed as a warning: "Do not disengage the drive motors when the power chair is on an incline or decline, as the unit could roll on its own. Only engage the freewheel mode when on a level surface."
And: "It is important to remember that when your power chair is in freewheel mode, the braking system is disengaged."
The Select Series, Select 6 2.0 and 600 ES manuals add: "Do not use your foot to operate the manual freewheel levers. Do not stand on the manual freewheel levers. Applying excessive force to the manual freewheel levers may result in damage to the freewheel levers, motors, and brakes."
All six manuals say: "Do not use the freewheel lever handles as tie-down points to secure this product."
For a replacement lever, Monster Scooter Parts lists "FRMASMB6925 - Right Side Freewheel Lever for the Jazzy 600, 600 XL, & Quantum Q600"
at $53.46. Its page says "This item is serial number specific"
and prints, as given: "Pride Mobility states that this lever is compatible with Jazzy 600 power chairs with a serial number J5608607001S10 and after."
The next line names "Jazzy 600 power chairs with a serial number J8508607001S10 and after"
, and a third "Quantum 600 power chairs with a serial number before J5709908001S10."
In our reading the second "Jazzy 600" line may be meant for the 600 XL, but the page does not say so; ask the seller which line applies to your serial number.
Joysticks and controllers: GC, GC3, VR2, VSI, Shark and LiNX
Pride's manuals for these chairs name the electronics only in passing. The Select 6 2.0 manual labels one figure "Electrical Components (Seat Post with GC3 Controller)"
and says "Each controller uses a different type of harness."
Pride's 600 ES product page prints "50 A Dynamic" as the standard electronics. Seller titles fill in the rest, and they name five controller families across this one model family: GC2/GC3, VR2, VSI, Dynamic Shark and Dynamic LiNX.
| Seller title (Monster Scooter Parts, shortened) | Price | Read |
|---|---|---|
| 40 Amp GC3 Controller for the Jazzy Select (ELEASMB6923) | $273.22 | 19 Nov 2026 |
| KIT2301228, replacement kit for 2 key GC2/GC3 joystick remote (replaces CTLDC1574) | $378.94 (struck $443.66) | 19 Nov 2026 |
| DWR1111H199, keypad overlay, 2-key GC joystick remote, Jazzy Select | $21.99 | 19 Nov 2026 |
| ELEASMB7226, GC2/GC3 joystick remote, Select 6, Select 6 Ultra, Sport Portable | $798.44 | 12 Nov 2026 |
| ELE1805534, VR2 off-board charger electronics, power seat thru joystick, Select 6 2.0 | $726.34 (struck $882.34) | 12 Nov 2026 |
| DWR1060H013, VR2 power seat thru joystick harness, Select 6 Ultra | $33.19 | 12 Nov 2026 |
| PLSKNCP1045, VSI joystick knob, Select Elite | $73.69 | 12 Nov 2026 |
| CTL1906943, Dynamic LiNX LE joystick remote, 600 ES, Select Elite and others | $429.99 | 19 Nov 2026 |
| ELE130055, Shark G4 electronics with Sub Song motors, 600 ES | $892.86 (struck $1,084.62) | 19 Nov 2026 |
| ACCASMB1864, carrot joystick knob, Jazzy 600 | $20.07 | 12 Nov 2026 |
| FRMASMB12744, inline joystick mount, Jazzy 600 and Quantum J4 | $63.79 | 19 Nov 2026 |
The KIT2301228 tile appeared in the "jazzy select" results, but its title names no Jazzy model; we list it as printed and do not tie it to a chair. The 40 amp GC3 controller page says it "fits later production Jazzy Select power chairs"
, is "made to work with the GC joystick remote"
, and: "This controller is serial number specific. It is only compatible with Jazzy Select power chairs with serial number J8305810031JD0 and after. Earlier chairs need a different controller."
Two serial lines on two pages of the same seller meet at one number. The motor page says DRVASMB1869/1870 fit Select chairs "from J8304406001C30 through J8305810031JD0"
, and the controller page says ELEASMB6923 fits "J8305810031JD0 and after". In our reading, J8305810031JD0 marks a change in the Select build that the seller ties to both parts, and a chair with that exact serial falls on both lists; if your serial is near it, ask the seller in writing which motor and controller your chair takes.
Which joystick family each Jazzy runs, how to read the label on the joystick and power module, and why a LiNX remote "will not plug into a Shark or GC3 system on its own"
(as one seller page says) are in our wheelchair joystick guide and the Pride and Jazzy parts guide; the quote is from the Monster Scooter Parts CTL1906943 product page, read 12 November 2026. Programming is a separate matter: Pride's statement on consumer right to repair says certain repairs, "such as programming related to speed or power seating and positioning"
, may require specialized expertise.
For the joystick itself, all six manuals give a daily check; the Select GT, Select Elite and Jazzy 600 Series manuals print it in full: "With the controller turned off, check the joystick. Make sure it is not bent or damaged and that it returns to the neutral position when you release it."
They add a daily look at the controller harness (the GT calls it the "controller communications cable"
) for fraying, cuts or exposed wires, with the provider called if there is a problem. When you move the controller to the other armrest, the Select Series manual says to "Unplug the controller harness from the power base"
first, and warns: "Do not place the controller harness so that it can be pinched in the seat frame or the power base frame."
Seats, armrests, covers and small parts
Seat weights on Pride's documents: 51.5 lbs for the Select standard high-back seat and 50.75 lbs for the Select 6 seat (Select Series sheet), 42.5 lbs for the Select GT high-back seat (GT appendix), 44 lbs for the Jazzy 600 standard seat with controller, and 50.4 lbs for the 600 ES seat on its sheet, while Pride's 600 ES product page prints 51.8 lbs (18 in. wide) and 54 lbs (20 in. wide); in our view, plan on the heaviest figure for your seat width. The Select Elite documents disagree: the sheet INFINFB2713 prints "Standard Seat (Comfort Seat): 43 lbs. (19.5 kg)"
, and the specifications appendix in the Select Elite manual prints "Standard Seat (Comfort Seat ): 50 lbs. (22.68 kg)"
, 7 lbs more. In our view, plan on the heavier figure when you lift the seat off.
Armrests are adjusted by the owner in the steps the manuals print. The Select Series manual: "Loosen the setscrews on the armrest. See figure 15."
then raise or lower the armrest and "Tighten the setscrews to secure the armrest."
The 600 ES manual prints three adjustments: height (two setscrews on the armrest receiver), width ("Loosen the knobs" on the armrest receiver bracket and slide the armrests in or out) and angle ("Loosen the jam nut" and turn the adjusting screw). The daily check in both manuals says: "Inspect the seating system, armrests, and front riggings for loose hardware, stress points, or damage. See your authorized Pride Provider if there is a problem."
Seller tiles for seating and covers on the pages we read: a Pride black vinyl full-length armrest pad (DWR1010D439) for the Jazzy Select Elite with the Comfort Seat at $32.13; SpinLife's "ARMPAD,ASSY,FLAT,BLACK,CO-MOLDED VINYL,FULL LENGTH,JAZZY SELECT GT,E-1010-805"
at $35; a clover leaf seat base platform (FRMASMB3860) for the Jazzy Select, Select 6, Jet 1 and Jet 3 at $98.64; a headrest mounting bracket (FRMASMB10977) for the Select and Select GT at $41.37; a battery cover for the Select, Select 6 and Select 6 Ultra "From $80.20" (the tile names no color); and a hub cap (DWR1060D008A) for the Select, Select 6, Select 6 Ultra and Select GT at $18.77. A Select HD seat tile (SET1806976) printed $462.95 with a struck $571.94; the Select HD has its own manual, which we did not read.
Small hardware on the same pages included a battery harness cable (DWR1060H001) titled for the Jazzy Air, EVO 613 and Select at $59.77 and a battery tray assembly (PLSASMB2151) for the TSS 300, Select 6 and Select Elite at $149.64. The Select Series manual lists "Frayed harnesses" and "Cracked or broken connectors"
among the symptoms that call for the provider.
Serial-number-specific parts: three seller pages that say so
Of the 6 Monster Scooter Parts product pages we read on 19 November 2026, 3 say the part is serial number specific: the Select and Select GT motor, the 40 amp GC3 controller for the Select, and the right freewheel lever for the Jazzy 600. The three ranges as printed:
- DRVASMB1869 / DRVASMB1870 motor, the page says:
"Select power chairs with serial numbers from J8304406001C30 through J8305810031JD0."
- ELEASMB6923 GC3 controller, the page says:
"Jazzy Select power chairs with serial number J8305810031JD0 and after."
- FRMASMB6925 right freewheel lever, the page says:
"Jazzy 600 power chairs with a serial number J5608607001S10 and after"
, a second "Jazzy 600" line "J8508607001S10 and after", and Quantum 600 chairs "before J5709908001S10."
The 600 ES electronics page does not print a range; it says several similar assemblies "are listed with different part numbers"
and asks you to match the number on the old part. In our view, three things settle most of these questions before you pay: a photo of the serial label, a photo of the part number on the old part, and the seller's answer in writing. All six of the product pages we read say "This item is not returnable"
, so a wrong guess is costly.
What the manuals address to the reader, and what they leave to the provider
Can I replace Jazzy Select parts myself? Mobility Atlas read six Pride owner's manuals on 19 November 2026 (Select Series, Select 6 2.0, Select Elite, Select GT, Jazzy 600 Series and Jazzy 600 ES), and all six open with the same warning: "An authorized Pride Provider or a qualified technician must perform the initial setup of this power chair and must perform all of the procedures in this manual."
All six also say the batteries "should only be serviced or replaced by an authorized Pride Provider or a qualified technician"
, and all six say the same of the wheels. In our reading, the manuals address some checks to the reader ("you can load test the batteries"
, the breaker reset, the daily and weekly checks), but each front page says a provider or qualified technician must perform all procedures in the manual; ask your provider which they expect you to do. The warranty texts add that warranty service "must be performed by an authorized Pride Provider."
| Task | Addressed to the reader as | Manuals that print it |
|---|---|---|
| Battery replacement | Provider or qualified technician only | All six |
| Drive wheel or tire replacement | Provider or qualified technician only | All six |
| Main circuit breaker reset | Rest about one minute, push in, turn on | All six |
| Joystick and harness checks | Daily check; provider if damaged | All six |
| Brake check | Weekly check, on level ground | All six |
| Battery load test | "you can load test", with a load tester | All six |
| Armrest and controller position | Adjustment steps | Select Series, 600 ES |
| Caster fork flutter, drive tire wear | See the provider | All six |
The breaker line in the Select Series manual reads: "If the circuit trips, allow your power chair to ‘rest’ for approximately one minute. Next, push in the circuit breaker button, turn on the controller, and continue normal operation. If the main circuit breaker continues to trip repeatedly, contact your authorized Pride Provider."
The breaker sits "on the front of the power base"
on the Select Series, Select Elite and Select GT, and "on the rear main frame" on the 600 ES.
The load test line, in the Select Series manual: "If the above conditions prove normal, you can load test the batteries with a battery load tester. These testers are available at automotive parts stores. Disconnect both batteries before load testing and follow the directions that come with the load tester. If either one of the batteries fails the load test, replace both of them. If your power chair still does not power up, contact your authorized Pride Provider."
Pride also published a one-page "Pride/Quantum statement on consumer right to repair"
, undated, which says Pride and Quantum are "committed to making replacement parts, service information, and diagnostic resources reasonably available to consumers and qualified independent repair providers"
, and that certain repairs "may require specialized expertise to help ensure consumer safety and the clinically appropriate operation of the equipment."
In our reading, the statement does not change what the manuals and warranty texts say about who performs procedures; ask your provider before you do work yourself while the chair is under warranty. Our power wheelchair repair guide covers repair routes in general.
What sellers charged: Monster Scooter Parts and SpinLife
Monster Scooter Parts' "jazzy select" search said 622 results over 39 pages, and its "jazzy 600" search 402 results over 26 pages, 16 tiles per page. We read the first two "jazzy select" pages and the first "jazzy 600" page: 48 tiles, 46 distinct titles after removing 2 repeats. The vendor line names Monster Scooter Parts on 23 of those titles, Pride Mobility on 10 and Universal Power Group on 13; a tile is a seller listing, not Pride's price. 6 tiles printed a struck price, and 9 printed "From" before the price.
We grouped the distinct titles from each results page by three written rules. Battery tiles: the title names a U1 or 22NF battery; harness, cover, tray and charger tiles are left out. Wheel and tire tiles: the title has "Wheel Assembly", "Anti-Tip Wheel" or "Tire for"; covers, caps, bearings and the two anti-tip assemblies with motors are left out. Electronics tiles: the title has "Controller", "Joystick Remote" or "Electronics Assembly"; overlays, mounts, bus cables and chargers are left out.
| Group | Tiles | Lowest | Highest |
|---|---|---|---|
| Battery tiles | 12 | $79.99 (U1, one battery, From) | $349.98 (22NF pack of two) |
| Wheel and tire tiles | 9 | $31.84 (WHLASMB2047 rear caster) | $312.10 (WHLASMB2187, Select HD) |
| Electronics tiles | 4 | $273.22 (GC3 controller, Select) | $892.86 (ELE130055, 600 ES) |
The other 21 distinct titles (seats, covers, harnesses, brackets, hardware, the charger and the anti-tip assemblies) fall outside the three groups. Across all 46 titles the lowest price was $2.25 (a Jazzy 600 footrest spring washer) and the highest $892.86 (the 600 ES electronics assembly). These ranges cover only the pages we loaded, not the seller's whole list.
How much do Jazzy Select and Jazzy 600 parts cost? Mobility Atlas read the first two Monster Scooter Parts results pages for "jazzy select" and the first page for "jazzy 600" on 19 November 2026, US prices in dollars as printed on the tiles. A U1 battery for the Select family was "From $79.99" each (the product's option data lists $159.98 for an AGM pair and $239.99 for a gel pair); the 22NF pack for the Jazzy 600 was $349.98. Wheel and tire tiles ran from $31.84 to $312.10, and controllers and electronics from $273.22 for a Select GC3 controller to $892.86 for the 600 ES Shark G4 assembly. A Select or Select GT drive motor was $449.44 per side. SpinLife's five part tiles ran from $35 to $157. All six product pages we opened said "This item is not returnable."
Prices change by date, seller, tax, shipping and country.
SpinLife's two searches returned 6 tiles: the Jazzy 600 ES chair itself at $3,999, which we leave out, and 5 parts from $35 to $157. Its tiles print no item numbers, except the armpad title, which ends "E-1010-805", so we do not match them to Monster Scooter Parts numbers even where the titles look alike (a 9 x 3 in. Select Elite drive wheel at $99 on SpinLife and the WHLASMB2017 9 x 3 in. wheel at $98.89 on Monster Scooter Parts).
Struck prices on the tiles: the 600 ES electronics assembly showed $892.86 against $1,084.62 ($191.76 less, in our subtraction), the WHLASMB2047 caster $31.84 against $53.60 ($21.76), and the GC2/GC3 joystick kit $378.94 against $443.66 ($64.72). In our reading a struck price is the seller's own comparison; it is not Pride's list price.
Return and warranty lines differ by item on the same site. The two battery pages say "This item has a 1 year warranty"
; the motor, controller, lever and 600 ES electronics pages say "This item has a 30 day warranty."
All six say "This item is not returnable."
We read the seller's general warranty page for an earlier guide; the Pride and Jazzy parts guide summarizes it.
Warranty, document by document
Warranty terms for these chairs depend on which Pride document came with yours. We read four; each line below belongs only to the document named.
| Document | Frame | Electronics, motors | Batteries |
|---|---|---|---|
| Select GT manual, INFMANU3807 (Sept 2009) | Five years: main frame, seat post | One year | Six months, by battery maker |
| Select Elite manual, INFMANU3973 (July 2010) | Three years: main frame, seat post | One year | Six months, by battery maker |
| Jazzy 600 ES product page (read 9 Nov 2026) | 5-year limited | 13-month limited; drive motors 13-month | 13-month limited |
| Standard power insert INFINFB2782, Rev K (July 2024) | 5 years main frame; 3 years fixed-position seat post | 13 months (2 years in Canada) | 13 months |
The Select Elite manual says: "For three (3) years from the date of purchase, Pride will repair or replace at our option to the original purchaser, free of charge,"
the structural frame parts it lists, and for one year the electronic components (charger assembly, controller, joystick) and other components including "Brakes (electronic function ONLY)"
and the "Motor/gearbox assembly". It adds: "The batteries are covered by a separate six-month warranty, provided by the battery manufacturer. The batteries are not warranted by Pride."
The Select GT manual prints the same structure with five years on the frame, and adds: "All reconditioned units are covered by a six-month warranty from Pride effective from the date of purchase."
Both older manuals exclude "Tires and tubes (wear items)"
, "Brake pads (wear items)", "Motor brushes", "Fuses", "Upholstery and seating" and "ABS Plastic shrouds and footrests"
, and both exclude labor: the Select Elite manual excludes "Labor, service calls, shipping, and other charges incurred for repair of the product, unless specifically authorized by Pride."
Both say: "Warranty service must be performed by an authorized Pride Provider. Do not return faulty parts to Pride without prior written authorization."
The 2024 insert INFINFB2782 adds a line on parts that the two older manuals do not print. Under its 13-month warranty it says: "Any warranty claims for electronic assemblies may become void if damage results from the use of parts/accessories that are not Pride original parts and are not purchased through an authorized Pride provider."
Its exclusions also cover components with damage caused by "Parts/accessories that are not Pride original parts and are not purchased through an authorized Pride provider."
We read that insert from the Jazzy EVO 614, Ultra Light and Air 2 pages; the 600 ES product page shows a "Download Warranty Insert" link, which we did not follow, so we cannot say which insert it opens.
The Select Series and Jazzy 600 Series manuals we read have no warranty section among their pages, as far as their page headings show, and we found no warranty text for the Select 6 2.0. In our reading, the two manuals and the insert run their terms from the date of purchase (the insert's battery term "from the initial date of consumer purchase or rental"
); the product page prints no start date. The longest term in the four is five years, so on an older Select or 600 the question is usually settled by the purchase date. In our view, for a 600 ES still under warranty, ask the provider before you buy electronics or batteries elsewhere.
Pride's general warranty clauses, transfer and labor lines across all Jazzy models are compared in our Jazzy guide and Pride Mobility guide.
Recalls: the Jazzy Select and Select 6 harness records
An openFDA recall search (firm "pride", description "select" or "600"; data last updated 14 November 2026) returned two records, Z-2618-2010 for the "Jazzy Select with XLR Port Harness"
and Z-2619-2010 for the "Jazzy Select 6 with XLR Port Harness"
, both covering "all serial numbers", both initiated 1 February 2010 and posted 29 September 2010, and both terminated on 20 November 2014. No record in that word search names a Jazzy 600 or 600 ES; the dates, the reason and the provider check are in our Jazzy guide.
In our reading, the record matters for parts in one way: it describes wires that could "become caught under the motor mounting bracket"
, the area you disturb when you change a motor or harness on a Select or Select 6. In our view, if you buy a used Select or Select 6 with an XLR port harness, ask a Pride provider whether the correction was done on your serial number. A recall record is not a count of failures, and the absence of a record for the 600 or 600 ES in a word search is not proof that no issue exists.
Medicare, funders and parts for these chairs
Medicare's booklet on durable medical equipment (CMS Product No. 11045, read 9 November 2026) says that if you own your equipment, "the supplier who sold it to you isn't required to repair it"
, and that "If you own Medicare-covered DME and other devices, Medicare may also cover repairs and replacement parts."
For rented equipment it says "your supplier must maintain and repair the equipment and keep it in good working order at all times."
These are US rules. We did not read Medicaid, Medicare Advantage or VA rules for this guide; ask the plan. The Medicare codes Pride prints for current Jazzy chairs are in our Jazzy guide.
Pride's own figures on parts shipping
Pride's one-page "Pride & Quantum's Commitment to Parts Support"
, linked from its Resources and Support page and read on 19 November 2026, gives its own figures for January to September 2026: "71% of parts orders ship within one business day", "90% ship within two business days" and "99% ship within ten business days." These are Pride's claims about orders it ships; the page does not say whether they cover parts for discontinued chairs such as the Select or the 600, and it gives no figures for any one model. The statement does not tell you how long a given part for your chair will take.
Ordering Jazzy Select and Jazzy 600 parts through Mobility Atlas
Our Pride Mobility parts page, linked at the top of this guide, takes part requests for Jazzy chairs, including parts that are not listed in our catalog. The process is: you send an enquiry or a part request; we send a written quote that includes delivery to your country; nothing is charged before you accept the quote. We do not quote prices, stock or delivery times on this page.
A request that gets an exact answer names the chair as printed on its label (Jazzy Select, Select 6, Select 6 2.0, Select Elite, Select GT, Jazzy 600 or 600 XL, Jazzy 600 ES), the serial number, the part, the number printed on the old part and, for wheels and casters, the size molded on the tire. For batteries, say U-1 or NF-22 as your chair's sheet prints it, and whether you want AGM or gel; the Select Series manual says both batteries must be "of the exact same type, chemistry, and amp-hour (Ah) capacity."
Three traps
Trap one: ordering by the model name alone. Three of six seller product pages we read are serial number specific, and two serial ranges for the Select meet at J8305810031JD0. All six pages say the item is not returnable. In our view, send the serial number with every order and keep the seller's written answer.
Trap two: mixing batteries. All six manuals prohibit mixing type, chemistry and capacity, and all six say "Do not mix old and new batteries."
A seller offering 35 Ah AGM and 32 Ah gel under one part number makes it easy to end up with one of each. In our view, buy the pair as one order.
Trap three: trusting a size in a title. Seller titles print 6 x 2 in. rear casters for the Select, whose Pride sheet prints 5.75 inches, and "22NF" packs for chairs whose sheets print "NF-22". The two may be the same thing written differently, but no page we read says so. In our view, measure the old part, read its number, and compare.
Three composite scenarios
These are composite scenarios, not individual customers. Each uses only the documents for that model in this guide.
Scenario one: a Jazzy Select owner whose chair no longer holds a charge. The Select Series sheet prints two 12-volt U-1 batteries at 25.25 lbs each and a 3.5 amp off-board charger. The manual's corrective maintenance steps say to check the harness connections, the circuit breaker and the battery connections first, then "you can load test the batteries with a battery load tester"
, and "If either one of the batteries fails the load test, replace both of them."
The manual says batteries "should only be serviced or replaced by an authorized Pride Provider or a qualified technician."
The owner asks the provider to fit a matched pair and asks the seller for the AGM pair rather than one battery.
Scenario two: a Jazzy Select Elite owner who wants new armrest pads to match a new seat cover. Monster Scooter Parts lists a Pride black vinyl full-length armrest pad (DWR1010D439) titled for the Select Elite "with the Comfort Seat" at $32.13, so the owner first checks which seat the chair has; the Select Elite sheet and manual both call the standard seat the "Comfort Seat" but print different weights (43 and 50 lbs). In our reading, the pads fall under the "Upholstery and seating" exclusion in the Select Elite manual's warranty, so the warranty does not come into it. Because the seller page is a seller listing, the owner sends the seller a photo of the old pad and its number and asks in writing whether the pad fits before ordering.
Scenario three: a family moving a Jazzy 600 Series chair that does not power up from the driveway into the garage. The 600 manual's corrective maintenance steps say to check the harness connections, the circuit breaker and the battery connections, and to contact the provider if the chair "still does not power up". To push it, the manual says to engage freewheel mode only "on a level surface", that in freewheel mode "the braking system is disengaged"
, and "Do not use the freewheel lever handles as tie-down points to secure this product."
They push the chair on the level drive only, pull both levers upward to re-engage the motors once it is parked, and call the provider with the model and serial number.
Questions to ask before you order
- To the seller: which Pride number does this part replace, and does it fit my serial number? Please answer in writing.
- To the seller: is the item returnable, and what warranty does this listing carry (the pages we read printed 1 year on batteries and 30 days on other items)?
- To the seller: is your size (for example 6 x 2 in.) the same part as the size on Pride's sheet for my chair?
- To the provider: was the 2010 XLR harness correction done on this Jazzy Select or Select 6 serial number?
- To the provider: which controller family is in my chair, and does a new joystick or controller need programming?
- To the provider, for a 600 ES under warranty: will buying a part elsewhere affect a claim under the insert that came with my chair?
- To your clinician: if seating, armrests or footrests need to change, which sizes are right for you? Seating choices belong to your physical therapist or seating specialist.
Sources and documents
Method: we read every document listed below in a browser, saved its text with the read date, and checked every quote and number in this guide against the saved text by script. Counts of manuals that print a line were made by script over the pages we copied and two fact-checkers' reads of all six manuals, saved as their own files, ignoring the stray spaces that the older PDFs insert inside words. Seller ranges were computed by script over every tile line on the three Monster Scooter Parts pages we loaded, under the three written group rules above; SpinLife ranges exclude the chair tile. Fitment is only as a Pride document or a seller page prints it.
The documents and their read dates are listed in the section on how we compared and in the source list below: Pride's manuals, sheets, statements, the Monster Scooter Parts and SpinLife pages and the openFDA searches were read on 19 November 2026; the 600 ES product page, the warranty insert INFINFB2782 and Medicare's booklet on 9 November 2026; and the Monster Scooter Parts joystick search and CTL1906943 product page on 12 November 2026.
Prices checked November 2026, on 19 November 2026 (Monster Scooter Parts and SpinLife, United States, US dollars) except the joystick search rows marked 12 November 2026. Prices differ by seller, date, tax, shipping, country and funding; confirm them with the seller before you buy. Documents checked November 2026, on the read dates given above.
This article is general information. Rules and prices differ by country and change, so confirm them before you buy or travel.
Common questions
What batteries does a Jazzy Select take?
Pride's specification sheets and the Select GT manual's appendix print two 12-volt U-1 batteries for the Jazzy Select, Select 6, Select 6 with Power Seat, Select 6 2.0, Select Elite and Select GT, with AGM or gel type required (the newer sheets also allow Hybrid Gel). Pride's texts print the size but no amp-hour figure; Monster Scooter Parts sells its BATLIQ1017 U1 as 35 Ah AGM or 32 Ah gel. The manuals say to use two batteries of the same type, chemistry and capacity and to replace both at once.
What batteries does a Jazzy 600 or 600 ES take?
The Jazzy 600 Series sheet prints two 12-volt NF-22 batteries at 35 lbs each, and the 600 ES sheet two NF-22 batteries at 37.2 lbs each (Pride's 600 ES product page prints 37 lbs). Both list a 5 amp off-board charger. A seller lists a 22NF 55 Ah AGM pack titled for the Jazzy 600 at $349.98; in our view, ask in writing whether it fits a 600 ES.
Are Jazzy Select and Jazzy 600 parts interchangeable?
Not as a rule. Pride's documents print different battery sizes (U-1 against NF-22), drive wheels (9 to 14 inches), caster sizes, freewheel lever movements and drive wheel fastenings. Seller pages tie some parts to serial ranges within one model. In our view, order by the Pride number on the old part and your serial number.
Can I change Jazzy Select batteries myself?
The manuals print the steps but say the batteries "should only be serviced or replaced by an authorized Pride Provider or a qualified technician,"
and that a provider or technician must perform all procedures in the manual. They warn that batteries are heavy and must not be replaced with the seat occupied.
Is there a recall on the Jazzy Select?
openFDA holds two records from one 2010 recall: Z-2618-2010 for the Jazzy Select and Z-2619-2010 for the Jazzy Select 6, both with an XLR port harness, both covering all serial numbers and both terminated on 20 November 2014. A word search returned no record naming the Jazzy 600 or 600 ES.
Why do prices for the same Jazzy part differ?
Sellers set their own prices, units and return terms, and prices change by date, tax, shipping, country and funding. On 19 November 2026 a U1 battery was $79.99 alone or $159.98 as an AGM pair at one seller, and the six product pages we read were not returnable. Mobility Atlas can quote a Jazzy part with delivery to your country.
Sources
- Pride Mobility: Resource Files (owner's manuals and specification sheets)
- Pride Mobility: Jazzy Select Series owner's manual, INFMANU3351 Rev J, November 2022 (PDF)
- Pride Mobility: Jazzy Select 6 2.0 owner's manual, INFMANU4932 Rev A, August 2018 (PDF)
- Pride Mobility: Jazzy Select Elite owner's manual, INFMANU3973 Rev B, July 2010 (PDF)
- Pride Mobility: Jazzy Select GT owner's manual, INFMANU3807 Rev B, September 2009 (PDF)
- Pride Mobility: Jazzy 600 Series owner's manual, INFMANU2828 Rev H, August 2011 (PDF)
- Pride Mobility: Jazzy 600 ES owner's manual, INFMANU4480 Rev D, May 2020 (PDF)
- Pride Mobility: Jazzy Select Series specifications sheet, INFINFB3151 Rev C (PDF)
- Pride Mobility: Jazzy Select 6 2.0 specifications sheet, INFINFB3955 Rev C (PDF)
- Pride Mobility: Jazzy Select Elite specifications sheet, INFINFB2713 Rev B (PDF)
- Pride Mobility: Jazzy 600 Series specifications sheet, INFINFB2754 Rev 50A (PDF)
- Pride Mobility: Jazzy 600 ES specifications sheet, INFINFB3155 Rev B (PDF)
- Pride Mobility: Jazzy 600 ES specifications and warranty pages
- Pride Mobility: Standard power warranty insert INFINFB2782, Rev K, July 2024 (PDF)
- Pride and Quantum: Commitment to Parts Support (PDF)
- Pride and Quantum: Statement on Consumer Right to Repair (PDF)
- Monster Scooter Parts: search, "jazzy select", page 1 (US seller)
- Monster Scooter Parts: search, "jazzy select", page 2 (US seller)
- Monster Scooter Parts: search, "jazzy 600", page 1 (US seller)
- Monster Scooter Parts: search, DRVASMB1869 (US seller)
- Monster Scooter Parts: search, jazzy joystick (US seller, read 12 November 2026)
- Monster Scooter Parts: CTL1906943 Dynamic LiNX LE joystick remote (read 12 November 2026)
- Monster Scooter Parts: BATLIQ1017 12 Volt U1 Battery for the Jazzy Select
- Monster Scooter Parts: BATLIQ1018 24 Volt 22NF (55 Ah) Battery Pack for the Jazzy 600
- Monster Scooter Parts: DRVASMB1869 / DRVASMB1870 Drive Motor Assembly for the Jazzy Select and Select GT
- Monster Scooter Parts: 40 Amp GC3 Controller for the Jazzy Select (ELEASMB6923)
- Monster Scooter Parts: FRMASMB6925 Right Side Freewheel Lever for the Jazzy 600, 600 XL and Quantum Q600
- Monster Scooter Parts: ELE130055 Shark G4 Electronics Assembly for the Jazzy 600 ES
- SpinLife: search, jazzy select (US seller)
- SpinLife: search, jazzy 600 (US seller)
- openFDA: device recalls, recalling firm pride and Select or 600 word search
- openFDA: device enforcement reports, same search (no matches)
- Medicare: Medicare Coverage of Durable Medical Equipment and Other Devices, CMS Product No. 11045 (PDF)
Read on . The wording of the article is our own.



