Vigour Back Support
Rigid backrests. Ventilated full-height rigid back with wide angle and depth adjustment and a modular accessory system.
Price on request

The JAY J3 Back is a modular rigid wheelchair backrest from Sunrise Medical, offered in a wide grid of sizes. Twelve heights span four support levels, from lower thoracic at 6.5 inches to shoulder height at 24 inches, and contour depths of 2.2, 3 or 6 inches set how much the shell wraps the trunk. The lightest shells weigh from 1.4 lb without hardware. Mounting hardware allows 20 degrees of angle adjustment.
You can order the JAY J3 Back through Mobility Atlas with delivery to Australia, New Zealand, the Gulf, Southeast Asia, Israel, Latin America, the United States and most other countries. Send an enquiry with your country, and Anna replies within 24 hours with a written quote. Our price is from US$504 before delivery.
Covers a broad range of users, from active people who want a low back at lower-thoracic level to those who need shoulder-height postural support with deep lateral contour. Height and contour are normally chosen with a seating clinician.
The same units on every product, converted from the specifications below. Where a source gives two limits, the lower one is shown.
Mounting hardware clamps to back canes (frame tubes) 3/4 to 1 1/8 in in diameter; choose the back width (12 to 26 in) to match your chair's back width; user weight up to 300 lb (500 lb on 22-26 in).
The maker shows it with Quickie chairs as a pairing suggestion; the carbon fibre version can be paired with the Freestyle backrest system on the Quickie Nitrum.
Not sure it fits your chair? Send the model and year, or a photo of the label, with your enquiry and Anna confirms the fit before quoting.
As printed by the maker or the seller on 13 November 2026. Send us the number from your old part or its label and we match it before we buy.
Published by the maker or the seller, seen on 13 November 2026. Ask for them with your enquiry and we send them with the quote.
| Product type | Rigid backrest |
|---|---|
| Widths | 12-26 in |
| Heights | 6.5-24 in (12 heights) |
| Contour depths | 2.2 in, 3 in or 6 in |
| Weight | From 1.4 lb without hardware |
| User capacity | 300 lb (12-20 in); 500 lb (22-26 in) |
| Hardware options | RH, SH, TH, 4-Point |
| Hardware adjustment | 20 degrees angle; +2 in width |
| Frame tubing | 3/4 to 1 1/8 in |
| Insert / cover | 1.5 in soft foam; spacer fabric and Lycra outer |
| Brand country | USA (home country of the brand, not confirmed) |
| Brand | JAY (Sunrise Medical) |
| Category | Backrests, postural supports and headrests, Rigid backrests |
| Catalog ID | AC-046 |
Compared with the source page; product details last checked on 13 November 2026. Details can change, so we confirm them in your quote.
Twelve heights: 6.5, 8 and 9.5 inches (lower thoracic), 12, 13.5 and 15 (mid thoracic), 16.5, 18 and 19.5 (upper thoracic), and 21, 22.5 and 24 (shoulder).
It is 300 lb for widths of 12 to 20 inches and 500 lb for widths of 22 to 26 inches.
Sunrise Medical lists frame tubing from 3/4 inch to 1 1/8 inch. Four hardware styles are offered: RH, SH, TH and 4-Point.
Yes. Mobility Atlas delivers it to Australia, New Zealand, the Gulf, Southeast Asia, Israel, Latin America, the United States and most other countries; our price is from US$504 before delivery, and Anna sends a written quote with delivery to your country within 24 hours. The quote states the delivery time. Delivery for an item like this starts at about US$95; the Ordering section on this page has the details on cost, payment and cancellation.
PulsCar, LLC, the US company that runs Mobility Atlas, buys it from the maker or a dealer and resells it to you. Anna, the founder, handles every order herself. Mobility Atlas is an independent buying service, not an official JAY dealer.
Yes, with a full refund, until the product has been bought for you. Payment is taken only after you accept the written quote.
Press Add to enquiry, add any other products or parts, and send the list with your country, sizes and options. We do not ask for payment details.
We check availability with the maker or a dealer and send you a price with delivery to your country.
If you accept the written quote, we buy the product and arrange delivery to you. Nothing is charged before that.
Mobility Atlas is an independent buying service. We are not an official dealer of JAY. How ordering works · Delivery, payment and returns
Rigid backrests. Ventilated full-height rigid back with wide angle and depth adjustment and a modular accessory system.
Price on request
Rigid backrests. Contoured back shell with scapular and hip cut-outs and rippled foam for airflow.
US$860
Rigid backrests. Low-profile back with an air-foam cushion and single-tool locking hardware that removes one-handed.
from US$540
Rigid backrests. Carbon fibre back shell in active or deep contour with a choice of fixed, adjustable or quick-release mounts.
US$874-966
Dynamic / flexible backrests. Spine-and-rib style flexible backrest in which each segment can be adjusted.
US$1,398-1,898