Nitrum
Rigid-frame active / ultralight. Highly configurable aluminium rigid chair with an oval-tube frame aimed at maximum push efficiency.
from US$2,481

Motion Composites · Rigid-frame active / ultralight · MW-004
Carbon rigid wheelchair
The Motion Composites APEX C is a rigid wheelchair with a frame made of T700 carbon fibre. A 16 x 16 in chair weighs 9.7 lb (4.08 kg) without rear wheels, and the lightest complete build comes to 17.2 lb. Unlike many carbon frames, its geometry stays adjustable: the centre of gravity moves through 6 in and the back angle from 80 to 101 degrees.
You can order the Motion Composites APEX C through Mobility Atlas with delivery to Australia, New Zealand, the Gulf, Southeast Asia, Israel, Latin America, the United States and most other countries. Send an enquiry with your country, and Anna replies within 24 hours with a written quote. Our price is from US$4,683 before delivery.
For active users who put low weight first, for example when lifting the frame across the body into a car many times a day, and who value the vibration damping of a carbon frame on rough pavements.
The same units on every product, converted from the specifications below. Where a source gives two limits, the lower one is shown.
As printed by the maker or the seller on 13 November 2026.
Published by the maker or the seller, seen on 13 November 2026. Ask for them with your enquiry and we send them with the quote.
| Transport weight | 9.7 lb (4.08 kg), 16 x 16 in, no rear wheels |
|---|---|
| Lightest complete chair | 17.2 lb (7.8 kg) |
| Max user weight | 265 lb (120 kg) |
| Seat widths | 12 to 20 in |
| Seat depths | 12 to 20 in |
| Frame | T700 carbon fibre, rigid |
| Back height | 9 to 21 in |
| Front seat height | 14 to 21 in |
| Rear seat height | 14 to 20 in |
| Overall width | 18 3/4 to 31 1/2 in |
| Brand country | Canada |
| Rear wheel sizes | 20, 22, 24, 25 or 26 in (rim 451, 501, 540, 559, 590 mm) |
| Caster wheel sizes | 3, 4, 5 or 6 in |
| Brand | Motion Composites |
| Category | Everyday manual wheelchairs, Rigid-frame active / ultralight |
| Catalog ID | MW-004 |
Compared with the source page; product details last checked on 13 November 2026. Details can change, so we confirm them in your quote.
Figures as on each product page, in the same units.
Transport weight is 9.7 lb (4.08 kg) for a 16 x 16 in frame without rear wheels, armrests, cushion or anti-tippers. The lightest usable configuration with wheels, wheel locks, back upholstery and cushion is 17.2 lb.
The APEX C is rated for users up to 265 lb (120 kg).
Yes. The centre of gravity adjusts across 6 in and the back angle between 80 and 101 degrees.
Yes. Mobility Atlas delivers it to Australia, New Zealand, the Gulf, Southeast Asia, Israel, Latin America, the United States and most other countries; our price is from US$4,683 before delivery, and Anna sends a written quote with delivery to your country within 24 hours. Chairs are built to order, and the quote states the delivery time. Delivery for an item like this starts at about US$350; the Ordering section on this page has the details on cost, payment and cancellation.
PulsCar, LLC, the US company that runs Mobility Atlas, buys it from the maker or a dealer and resells it to you. Anna, the founder, handles every order herself. Mobility Atlas is an independent buying service, not an official Motion Composites dealer.
Yes, with a full refund, until the product has been bought for you. Payment is taken only after you accept the written quote.
Press Add to enquiry, add any other products or parts, and send the list with your country, sizes and options. We do not ask for payment details.
We check availability with the maker or a dealer and send you a price with delivery to your country.
If you accept the written quote, we buy the product and arrange delivery to you. Nothing is charged before that.
Mobility Atlas is an independent buying service. We are not an official dealer of Motion Composites. How ordering works · Delivery, payment and returns
Rigid-frame active / ultralight. Highly configurable aluminium rigid chair with an oval-tube frame aimed at maximum push efficiency.
from US$2,481
Rigid-frame active / ultralight. Aluminium mono-tube rigid chair built to order with a very wide range of configuration options.
from US$2,214
Rigid-frame active / ultralight. Modular rigid active chair with a multi-position seat and a folding, angle-adjustable backrest.
from US$3,195
Rigid-frame active / ultralight. Made-to-measure titanium rigid chair whose frame is guaranteed to come in under 4 kg.
from US$11,010
Rigid-frame active / ultralight. Aluminium rigid chair designed for responsive handling and easy car loading.
from US$2,313
This chair is listed with 20, 22, 24, 25 or 26 in rear wheels, but no size code. These tyres and tubes share the nominal inch size only; the same inch name covers different rims and widths, so they may not fit. Read the size code on the side of your tyre (for example 25-540) and send it with your enquiry; we match it before quoting.
Tires - puncture-resistant pneumatic. Heavily puncture-protected pneumatic tyre with a low-marking compound and grippy sidewalls.
US$62
Inner tubes. Basic Schrader-valve inner tube from Kenda's wheelchair tube range.
US$11
Inner tubes. A standard 24 x 1 in wheelchair inner tube with a straight Schrader valve, sold singly by the US retailer Sportaid.
US$9
All 20 in tyres, tubes and wheels
All 22 in tyres, tubes and wheels
All 24 in tyres, tubes and wheels