Professional Wheelchair Bearing Removal and Installation Tool Kit
Tool kits. Complete kit for pulling and pressing wheelchair bearings, with stand and work mat.
US$230
Last updated: 21 November 2026 · 307 parts and tools
Most wheelchair breakdowns are small: a flat tyre, a worn bearing, a loose wheel lock, a torn armrest pad, a blown fuse. Many of them can be fixed at home or in a small workshop with the right part and a few tools. This page brings together the tools, wear parts and repair guides in the catalog.
Work on the brakes, wiring, controller or seating of a power chair is best done or checked by a trained technician, and the maker's service manual comes first. If you cannot find the part you need, send the make and model of the chair and a photo of the part or its label: Anna finds it and sends a quote with delivery to your country.
Request a partPart numbers A to ZSend a photo on WhatsApp
Hex keys, torque wrenches, tyre levers, pumps, bearing pullers and presses, truing stands, grease and cleaners.
Tool kits. Complete kit for pulling and pressing wheelchair bearings, with stand and work mat.
US$230
Tool kits. Combined metric and imperial hex key set sold by a wheelchair parts specialist.
US$64
Tool kits. A pouch of hand tools sold for maintaining Quickie wheelchairs, with both inch and metric hex keys.
US$75
Bearing tools. A single-size puller for drawing R8 (1/2 inch bore) bearings out of wheelchair rear hubs and forks.
US$23
Bearing tools. A single-size puller for 608 bearings with an 8 mm bore, the size found in many wheelchair front caster wheels.
US$23
Bearing tools. A press tool for removing and fitting R8 (1/2 inch bore) bearings in wheelchair rear hubs and forks.
US$35
Out of stock at source
Bearing tools. Three tools that pull out a bearing outer race left stuck in a caster, fork, fork mount or rear hub after a bearing has come apart.
US$58
Bearing tools. A hard maple block with a rubber top that supports a caster, wheel or fork while bearings are driven out or pressed in.
US$38
Pneumatic, puncture-resistant and solid tyres, tubes, liners and rim tape. Match the ETRTO code on your sidewall, for example 25-540.
Tires - puncture-resistant pneumatic. Heavily puncture-protected pneumatic tyre with a low-marking compound and grippy sidewalls.
US$62
Tires - off-road. Wide semi-slick tyre with a flat centre and knobbly shoulders for moving between pavement and rough ground.
US$43-50
Tires - solid / puncture-proof. Flat-free microcellular polyurethane tyre that replaces a pneumatic tyre and tube and needs no maintenance.
US$46
Tires - solid / puncture-proof. Narrow lightly treaded solid tyre for performance wheels, firm like a high-pressure pneumatic.
US$57
Inner tubes. Basic Schrader-valve inner tube from Kenda's wheelchair tube range.
US$11
Wheel and caster bearings by size (608, R8 and others), caster wheels, forks and stem bearings. A worn bearing is one of the most common faults.
Wheel bearings. A four-pack of R8 bearings with rubber seals for rear wheels and forks on chairs with a 1/2 in axle.
US$29
Wheel bearings. A four-pack of stainless steel SR8 bearings for shower wheelchairs with a 1/2 in axle.
US$29
Wheel bearings. A four-pack of R10 bearings for rear wheels that run on a 5/8 in axle, such as Spinergy R-10 models.
US$29
Wheel bearings. A pair of ceramic hybrid R8 deep-groove bearings for 1/2 in axle wheelchair wheels.
US$95
Wheel bearings. Four sealed 1620 bearings (7/16 in bore, 1-3/8 in outside diameter) for rear wheel hubs with a 7/16 in axle, with double-lipped rubber seals and water-resistant grease. Listed as replacements for Invacare bearing no. 40117X024 in Invacare and Drive rear wheels.
US$29
Wheel bearings. Four 99502H bearings (5/8 in bore, 1-3/8 in outside diameter) used on X-Core rear wheelchair wheels with a 5/8 in axle. Each kit includes 4 bearings, 2 cotton swabs, 2 acetone wipes, 1 grease packet and an instruction booklet.
US$29
Wheel bearings. A single sealed 6002-2RS/C3 bearing from Rolko, 15 mm bore, 32 mm outside diameter and 9 mm wide. A standard-size bearing, for replacing a rough or noisy bearing of this size.
US$16
Caster bearings. A four-pack of R6 caster bearings with rubber seals for front casters on a 3/8 in axle.
US$26
See all: Casters, forks and front attachmentsSee all: Wheelchair wheels, handrims and tires
Wheel locks and brake parts, quick-release axles, axle sleeves, anti-tippers, screws, nuts and pins.
Brakes / wheel locks. Fibre-reinforced composite wheel locks, roughly half the weight of aluminium ones, with textured handles.
US$53
Brakes / wheel locks. Retracting-lever brake that tucks away from the hands like a scissor lock but is reached like a push-to-lock.
US$113
Brakes / wheel locks. Aluminium scissor-style wheel lock intended as a universal replacement brake.
US$124
Brakes / wheel locks. A pair of anodised aluminium scissor brakes with a 6 mm screw adjustment set by a 3 mm hex key.
US$202
Brakes / wheel locks. A pair of extension handles with lanyards for the composite wheel locks on TiLite chairs.
US$98
Brakes / wheel locks. A cable-operated hub lock that locks both Spinergy rear wheels from a single lever.
US$1,146
Brakes / wheel locks. A scissor brake that mounts under the frame on a clamp, sold as separate left and right units.
US$106
Pre-order at source
Brakes / wheel locks. An aluminium scissor wheel lock for ultralight chairs with 1 in or 1-1/4 in frame tubing.
US$91
See all: Axles, brakes and anti-tippersSee all: Wheelchair tools and maintenance
Replacement seat and back upholstery, armrest pads, footplates, calf straps and heel loops.
Replacement seat upholstery. Vinyl-encapsulated polyester mesh seat upholstery with a 3 5/8 in center-bolt mounting pattern; mounting screws included.
from US$46
Replacement seat upholstery. Nylon sling-seat upholstery for chairs with a 4-4-4 in mounting-hole pattern; mounting screws included.
US$52
Replacement seat upholstery. Seat upholstery for Cruiser III and 4 wheelchairs with adjustable seat depth. Each width starts at 16 in deep and extends 2 in to 18 in. The maker lists it for Cruiser III chairs with serial numbers beginning 5D and adjustable seat depth.
from US$53
Replacement back upholstery. Model-specific replacement back upholstery for Drive Viper, Viper Plus and Viper Plus GT wheelchairs, in three sizes.
from US$68
Replacement back upholstery. Nylon sling back upholstery with a rear storage pocket, mounted with four screws on a 5 1/2 in center-bolt pattern; installation hardware included.
from US$46
Armrest pads. Pair of nylon-covered foam pads that fasten over existing wheelchair armrests with hook-and-loop straps.
US$80-89
Armrest pads. Six-inch-wide padded armrest pad that replaces a standard wheelchair arm pad and can be mounted with the extra width facing in or out.
US$103
Armrest pads. Desk-length polyurethane armrest pad over a metal frame, with an elbow stop, for Invacare cantilever arms and power seating. Sold individually; right and left are set by part number.
US$47
See all: Footrests, armrests and side guardsSee all: Backrests, postural supports and headrests
Batteries for power chairs and scooters, chargers, battery leads, fuses and charging sockets.
Batteries - lead-gel. Sealed, maintenance-free deep-cycle gel battery in the Group 22NF size.
US$311
Batteries - lithium. Slim lithium-ion battery pack for the e-fix power add-on that fits and removes with one hand.
US$1,148
Chargers. Genuine replacement charger for the e-motion M25 power-assist wheels.
US$390
Batteries - AGM. Sealed AGM battery in the U1 case size, sold singly or as a pair for 24 volt scooters and power chairs.
US$92
Batteries - AGM. Compact sealed AGM battery with F2 tabs for travel scooters that run on small 12 Ah packs.
US$52
Batteries - AGM. Pair of sealed 22NF AGM batteries with a hardware kit, forming a 24 volt set for larger scooters and power chairs.
US$403
Batteries - lead-gel. Sealed gel deep-cycle battery in group 24 size for power wheelchairs with large battery bays.
US$490
Batteries - AGM. Sealed 12 volt 35 Ah AGM battery in U1 size with nut-and-bolt terminals for mobility and general deep-cycle use.
US$87
Joystick modules, power modules, cables, motors, brushes, electromagnetic brakes and freewheel levers.
Joystick modules. The standard R-net joystick with LED indicators, 10 buttons and light controls, without a screen. Replace it when the joystick no longer drives, buttons stop working or the LEDs flash a fault that points to the joystick.
US$757
Curtiss-Wright (PG Drives Technology)
Joystick modules. The complete PG Drives VR2 joystick controller with four keys, used on many Pride Jazzy, Quantum, Merits and Shoprider power chairs. Replace it when the joystick no longer drives, the keypad or speed control fails, or the casing is broken beyond repair.
US$485
Curtiss-Wright (PG Drives Technology)
Joystick modules. The complete PG Drives VR2 joystick controller with six keys; the two extra keys run a powered seat function. Replace it when the chair no longer drives from the joystick or keys and speed control have failed.
US$501
Joystick modules. The 4-key Dynamic Shark joystick remote with basic drive controls, used with a separate Shark power module on many Pride, Golden, Merits and Shoprider chairs. Replace it when the joystick no longer drives or the keys and speed control fail.
US$356
Joystick modules. The simple LiNX LE joystick remote used on Pride Jazzy EVO 614, Elite 14 and Elite HD, with an XLR charger socket. Replace it when the chair stops driving from the joystick or the buttons fail.
US$495
Quantum Rehab (Pride Mobility)
Joystick modules. Quantum's Q-Logic 3 joystick with a colour screen, Bluetooth and infrared controls, used on Q6 Edge chairs. Replace it when the chair no longer drives from the joystick, the screen fails or buttons stop working.
US$1,035
Quantum Rehab (Pride Mobility)
Joystick modules. A non-expandable Q-Logic NE+ joystick with six buttons, data display, charger port and 2-actuator control for TRU-Balance power seating. Replace it when the chair stops driving from the joystick or the seat keys fail.
US$460
Quantum Rehab (Pride Mobility)
Joystick modules. The Q-Logic 3e hand controller with colour screen, programmable soft keys, USB-C and XLR charging and Bluetooth mouse and iOS switch functions. Replace it when the controller no longer drives the chair or the screen or keys fail.
US$1,437